• Seerianumber: ECP-AR-013
• Manufacturer: NTY

• Switch Pressure [bar]: 0.5
• Thread Size: M14x1.5
• Sensor Type: Closed-type Sensor
• Manufacturer: VERNET
• Additional information: OS3561 VERNET
• Lisainfo: OS3561 VERNET

• Pistikkontaktide arv: 2
• Garantii: 3 aastat garantii
• Kaal (kg): 0,01
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV687

• Engine Code: B 5252 FS
• Pressure [bar]: 0.5
• Thread Size: M14x1,5
• Spanner Size: 24
• Manufacturer: FACET

• Pistikkontaktide arv: 2
• Manufacturer: OYODO

• Keermemõõt: M14x1,5 mm
• Piirangutega toode/piirangu info: koos tihendiga
• Pistikkontaktide arv: 1
• Surve (bar): 0,5
• Manufacturer: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Engine Code: B 5252 FS
• Surve (bar): 0,5
• Keermemõõt: M14x1,5
• Võtmekaugus: 24
• Name: OLISURVELšLITUS
• Manufacturer: EPS

• Engine Code: B 5252 FS
• Pistikkontaktide arv: 2
• Manufacturer: KAVO PARTS

• Thread Size: M 14x1,5
• Manufacturer: FAE

• Pistikkontaktide arv: 1
• Lülitusrõhk alates [bar]: 0,39
• Lülitusrõhk kuni [bar]: 0,58
• Keermemõõt: M 14 x 1,5
• Värv: must
• Piirangutega toode/piirangu info: koos tihenditega
• Manufacturer: METZGER

• Number of pins: 2
• Colour: black
• Socket colour: blue
• Connector Shape: rectangular
• Sensor Type: NTC Sensor
• for OE number: 3934024755
• Manufacturer: MEAT&DORIA

• valikuliselt:
• Pistikkontaktide arv: 2
• Korpusevärv: must
• alternatiivne remondikomplekt: 550718
• Manufacturer: ERA

• Engine Code: B 5252 FS
• Thread Size: M14 x 1,5
• Switch Pressure [bar]: 0.5
• Spanner Size: 24
• Number of pins: 1
• Weight [kg]: 0.05
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of pins: 3
• Connector Shape: rectangular
• Number of mounting bores: 2
• Rotation Direction: Anticlockwise rotation
• Supplementary Article/Info 2: without cable
• for OE number: 8945205010
• Manufacturer: MEAT&DORIA

• Number of pins: 3
• Operating Mode: Mechanical
• Manufacturer: DELPHI

• Engine Code: B 5252 FS
• Manufacturer: FACET

• Engine Code: B 5252 FS
• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: EPS

• Engine Code: B 5252 FS
• Mounting Type: Plugged
• Number of connectors: 2
• Weight [kg]: 0.012
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• valikuliselt:
• Piirangutega toode/piirangu info: koos tihendiga
• Pistikkontaktide arv: 3
• Piirangutega toode/piirangu info 2: ilma kaablita
• Pistikukatte kuju: ristkülik
• Kaal (kg): 0,024
• alternatiivne remondikomplekt: 550144
• Manufacturer: ERA

• Number of connectors: 3
• Manufacturer: VERNET

• Required quantity: 1
• Pistikkontaktide arv: 2
• Anduritüüp: Induktiivandur
• Piirangutega toode/piirangu info 2: koos kaabliga
• Korpusevärv: must
• Pistiku värv: valge
• Name: CZUJNIK POO½ENIA WAU KORB. RENAULT
• Manufacturer: BRM

• Number of pins: 2
• Colour Coding: black
• Weight [kg]: 0.016
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Pistikkontaktide arv: 3
• Värv: must
• Materjal: Plastik
• Manufacturer: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: VER

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Number of pins: 2
• Cable Length [mm]: 110
• Socket colour: black
• Spanner Size: 19
• Thread Size: M10x1
• for OE number: 7439186486
• Supplementary Article/Info 2: with seal ring
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

Manufacturer: FAE

• Thread Size: M10x1.0
• Supplementary Article/Info 2: with cable
• Manufacturer: VERNET
• Additional information: WS2561 VERNET
• Lisainfo: WS2561 VERNET

• Number of pins: 2
• Connector Shape: rectangular
• Socket colour: black
• Cable Length [mm]: 310
• Sensor Type: Inductive Sensor
• for OE number: 3547699
• Manufacturer: MEAT&DORIA

• Engine Code: B5252FS
• Resistor [Ohm]: 300
• Cable Length [mm]: 310
• Sensor Type: Inductive Sensor
• Colour: white
• Number of pins: 2
• Number of connectors: 2
• Rated Voltage [V]: 12
• Fitting Depth [mm]: 32
• Housing Colour: black
• Weight [kg]: 0.087
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

Manufacturer: MAGNETI MARELLI

Manufacturer: MAGNETI MARELLI

• Engine Code: B 5252 FS
• Thread Size: M10x1
• Spanner Size: 19
• Manufacturer: FACET

• Required quantity: 1
• Pistikkontaktide arv: 3
• Anduritüüp: Induktiivandur
• Piirangutega toode/piirangu info 2: koos kaabliga
• Korpusevärv: hall
• Pistiku värv: valge
• Name: CZUJNIK POO½ENIA WAKA ROZRZ. VOLVO
• Manufacturer: BRM

• Engine Code: B 5252 FS
• Keermemõõt: M10x1
• Võtmekaugus: 19
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Kaablipikkus (mm): 143
• Pistikkontaktide arv: 2
• Ühenduskeere: M10 x 1
• Manufacturer: ERA

• Name: ANDUR,DROSSELKLAPIASEND
• Manufacturer: BOS

• Voltage [V]: 12
• Resistor [Ohm]: 300
• Cable Length [mm]: 315
• Sensor Type: Inductive Sensor
• Number of pins: 2
• Assy./disassy. by qualified personnel required!:
• Name: ANDUR, VŽNTVOLL
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: B 5252 FS
• Pikkus (mm): 310
• Name: ANDUR, VŽNTVOLL
• Manufacturer: EPS

• Number of pins: 2
• Connector Shape: oval
• Socket colour: black
• Cable Length [mm]: 140
• Thread Size: M10x1 mm
• Sensor Type: NTC Sensor
• Spanner Size: 19 mm
• for OE number: 7439186486
• Manufacturer: MEAT&DORIA

• tehnilise informatsiooni number: Universal
• pikkus üle kõige (mm): 325
• Pistikkontaktide arv: 4
• Lambda andur: Sond
• Manufacturer: ASHIKA
• Lisainfo: 43-U04
• Additional information: 43-U04

• Length [mm]: 215
• Number of pins: 3
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: DLP

• tehnilise informatsiooni number: Universal
• pikkus üle kõige (mm): 325
• Pistikkontaktide arv: 4
• Lambda andur: Sond
• Manufacturer: JAPKO

• Cable Length [mm]: 310
• Number of pins: 2
• Housing Colour: black
• Manufacturer: FAE

• Mounting Type: Bolted
• Voltage [V]: 12
• Resistor [Ohm]: 2,200, 257
• Supplementary Article/Supplementary Info: with gasket/seal
• Temperature range from [°C]: 25
• Temperature range to [°C]: 80
• Thread Size: M10x1
• Sensor Type: NTC Sensor
• Number of pins: 2
• Supplementary Article/Info 2: with cable
• Housing Colour: black
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: B 5252 FS
• Length [mm]: 310
• Manufacturer: FACET

• Oxygen Sensor: Diagnostic Probe, Finger probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: MAX
• Lisainfo: MGS-505
• Additional information: MGS-505

• Piirangutega toode/piirangu info 2: koos potentsiomeetriga
• Manufacturer: METZGER

• Engine Code: B 5252 FS
• Sensor Type: NTC Sensor
• Thread Size: M10x1,0
• Spanner Size: 19
• Supplementary Article/Info 2: with seal ring
• Number of pins: 2
• Manufacturer: MEYLE

• Lambda andur: soojendatud
• Kaablipikkus (mm): 640
• Manufacturer: FAST

• Construction Year from: 09.1996
• Line insulation design: with silicone-coated woven-fibre insulation
• Length [mm]: 880
• Number of pins: 4
• Oxygen Sensor: Finger probe, Thread pre-greased
• Weight [kg]: 0.161
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year from: 09.1996
• Line insulation design: with silicone-coated woven-fibre insulation
• Number of pins: 4
• Socket colour: black
• Number of circuits: 4
• Connector Shape: rectangular
• Cable Length [mm]: 730
• Thread Size: M18 x 1,5
• Weight [kg]: 0.013
• for OE number: 993 606 127 01
• Length [mm]: 850
• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Fitting Position: after catalytic converter
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year from: 09.1996
• Oxygen Sensor: Heated
• Number of pins: 4
• Cable Length [mm]: 640
• Quality: OE EQUIVALENT
• for OE number: 55351836
• Manufacturer: MEAT&DORIA

• Oxygen Sensor: Regulating Probe
• Number of pins: 4
• Cable Length [mm]: 1,000
• for OE number: 60808350
• Manufacturer: MEAT&DORIA

• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Slider
• Connector Shape: rectangular
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA

SVHC: 1317-36-8; Lead monoxide (lead oxide), 7439-92-1; Lead Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Construction Year from: 09.1996
• Oxygen Sensor: Heated
• Number of pins: 4
• Cable Length [mm]: 750
• for OE number: 0258003577
• Manufacturer: MEAT&DORIA

• Number of pins: 3
• Housing Colour: black
• Manufacturer: FAE

• Engine Code: B 5252 FS
• Model Year from: 1997
• Quantity: 2
• Pikkus (mm): 460
• Kaablipikkus (mm): 540
• Name: DETONATSIOONIANDUR
• Manufacturer: EPS

• Length [mm]: 180
• Sensor Type: Hall Sensor
• Number of pins: 3
• Supplementary Article/Info 2: with cable
• Manufacturer: FAE

• Construction Year to: 09.1996
• Engine Code: B 5252 FS
• Vehicle Identification Number (VIN) from: 70019
• Oxygen Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Fuel Type: Regular (91) unleaded, Super unleaded (95)
• Pikkus (mm): 540
• Ülekandeliinide arv: 4
• Manufacturer: VDO

• Voltage [V]: 12
• Length [mm]: 160
• Sensor Type: Hall Sensor
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Name: Andur,Nukkvollipositsioon
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: BOS

• Fitting Position: before catalytic converter
• Vehicle Identification Number (VIN) from: 69907
• Oxygen Sensor: Regulating Probe
• Cable Length [mm]: 520
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PA358066081
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Sensor Type: Hall Sensor
• Mounting Type: Screw Connection
• Shape: rectangular
• Number of pins: 3