• Fitting Position: Front Axle
• Inner Diameter [mm]: 65.9
• Width [mm]: 8.2
• Outer Diameter [mm]: 78
• Number of Teeth, ABS ring: 43
• Manufacturer: TRISCAN
• Lisainfo: MITSUBISHI, VOLVO
• Additional information: MITSUBISHI, VOLVO

• Construction Year from: 04.2007
• Fitting Position: Rear Axle
• Sensor Type: Hall Sensor
• Number of connectors: 2
• Lisainfo: Sensor, wheel speed
• Additional information: Sensor, wheel speed

• Vehicle Identification Number (VIN) from: 500782
• Fitting Position: Front Axle Left, Front Axle Right
• Model Year to: 2012
• Sensor Type: Hall Sensor
• Braking/Drive Dynamics: for vehicles without ESP
• Lisainfo: Sensor, wheel speed
• Additional information: Sensor, wheel speed

• Fitting Position: Front Axle both sides
• Inner Diameter [mm]: 65.9
• Thickness [mm]: 8.2
• Number of Teeth: 43
• Manufacturer: AIC
• Additional information: NRF54213
• Lisainfo: NRF54213

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Construction Year from: 04.2007
• Fitting Position: Rear Axle
• Sensor Type: Hall Sensor
• Number of pins: 2
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Number of pins: 2
• Supplementary Article/Info 2: without cable
• Fitting Position: Front Axle Left, Front Axle Right
• Fabrication Number: HCA-MZ-019

• Fitting Position: Front Axle Left, Front Axle Right
• Fabrication Number: HCA-FR-011
• Name: NTY HCA-FR-011
• Manufacturer: NTY

• Fitting Position: Front Axle
• Sensor Type: Hall Sensor
• Number of pins: 2
• Connector Shape: angular
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Rear Axle Left, Rear Axle Right
• Braking/Drive Dynamics: for vehicles with ABS
• Supplementary Article/Info 2: without cable
• Fabrication Number: HCA-MZ-018

• Construction Year from: 04.2007
• Fitting Position: Rear Axle
• Name: MM MWSS046
• Manufacturer: MAGNETI MARELLI

• Construction Year from: 04.2007
• Fitting Position: Front Axle
• for OE number: 3M5T2B372AB
• Number of pins: 2
• Number of mounting bores: 1
• Name: MM MWSS045
• Manufacturer: MAGNETI MARELLI

• Construction Year from: 04.2007
• Fitting Position: Front Axle
• Supplementary Article/Info 2: without cable
• Sensor Type: Active sensor
• Manufacturer: KAMOKA

• Fitting Position: Rear Axle
• Sensor Type: Active sensor
• Supplementary Article/Info 2: without cable
• Fabrication Number: HCA-FR-010

• Installatsiooni pool: esisild mõlemapoolselt
• Ühenduste arv: 2
• Manufacturer: JPN

• Construction Year from: 04.2007
• Fitting Position: Rear Axle
• Supplementary Article/Info 2: without cable
• Sensor Type: Active sensor
• Manufacturer: KAMOKA

• Fitting Position: Rear Axle
• Required quantity: 2
• Number of pins: 2
• Supplementary Article/Info 2: without cable
• Sensor Type: Hall Sensor
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PU358217311
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Fitting Position: Front Axle
• Construction Year from: 04.2006
• Construction Year to: 09.2010
• Number of pins: 2
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: Front Axle Right, Front Axle Left
• Sensor Type: Active sensor
• Number of pins: 2
• Supplementary Article/Info 2: without cable
• Braking/Drive Dynamics: for vehicles without ESP
• Fitting Depth [mm]: 25
• Manufacturer: AUTOFREN SEINSA
• Name: SE DS0021

• Required quantity: 2
• Fitting Position: Front Axle
• Construction Year from: 04.2007
• Supplementary Article/Info 2: without cable
• Manufacturer: DENCKERMANN FILTRY

• Required quantity: 2
• Fitting Position: Rear Axle
• Sensor Type: Hall Sensor
• Manufacturer: DELLO AUTOMEGA

• Required quantity: 2
• Fitting Position: Rear Axle
• Construction Year from: 04.2007
• Supplementary Article/Info 2: without cable
• Manufacturer: DENCKERMANN FILTRY

• Fitting Position: Rear Axle Right, Rear Axle Left
• Number of pins: 2
• Sensor Type: Active sensor
• Supplementary Article/Info 2: without cable
• Fitting Depth [mm]: 14
• Vehicle Equipment: for vehicles without park distance control
• Manufacturer: AUTOFREN SEINSA
• Name: SE DS0020

• Fitting Position: Front Axle, Front Axle Right, Front Axle Left
• Manufacturer: AUTO-GH

• Fitting Position: Rear Axle
• Overall Length [mm]: 38
• Length [mm]: 14
• Sensor Type: Active sensor
• Socket colour: black
• paired article number: 30131
• Weight [kg]: 0.08
• Manufacturer: A.B.S.

• Installatsiooni pool: Tagasild mõlemapoolselt
• Ühenduste arv: 2
• Manufacturer: JPN

• Fitting Position: Front Axle, Front Axle Right, Front Axle Left
• Manufacturer: AUTO-GH

• Length [mm]: 38
• Sensor Type: Active sensor
• Fitting Position: Rear Axle Left, Rear Axle Right
• Manufacturer: FAST

• Fitting Position: Rear Axle
• Weight [kg]: 0.022
• Packaging length [cm]: 3.9
• Packaging width [cm]: 2.6
• Packaging height [cm]: 2.1
• Colour Coding: black
• Manufacturer: FEBEST

• Construction Year from: 04.2006
• Fitting Position: Rear Axle
• Number of pins: 2
• Plug Type: Male
• Connector Shape: oval
• Guarantee: 3 years guarantee
• Voltage [V]: 12
• Weight [kg]: 0.02
• Colour: black
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Name: CE 06SKV004
• Manufacturer: ESEN SKV

• Length [mm]: 14
• Sensor Type: Active sensor
• Fitting Position: Rear Axle Left, Rear Axle Right
• Manufacturer: FAST

• Construction Year from: 04.2007
• Fitting Position: Front Axle
• Number of pins: 2
• Plug Type: Male
• Connector Shape: oval
• Guarantee: 3 years guarantee
• Voltage [V]: 12
• Weight [kg]: 0.02
• Colour: black
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Name: CE 06SKV001
• Manufacturer: ESEN SKV

• Fitting Position: Front Axle Left, Front Axle Right
• Alternatively:
• Number of pins: 2
• Fitting Depth [mm]: 24.5
• Weight [kg]: 0.01
• Alternative Repair Kit: 560052
• Resistor M[ohm]: 1.3
• Manufacturer: ERA

• Engine Code: B 4184 S8
• Fitting Position: Rear Axle Left, Rear Axle Right
• Required quantity: 2
• Sensor Length [mm]: 14
• Name: EP 1.960.018
• Manufacturer: EPS

• Fitting Position: Front Axle
• Rated Voltage [V]: 12
• Guarantee: 5 years guarantee
• Name: HU 131655
• Manufacturer: HUECO / HITACHI

• Fitting Position: Front Axle
• Overall Length [mm]: 55
• Length [mm]: 25
• Sensor Type: Active sensor
• Socket colour: black
• paired article number: 30130
• Weight [kg]: 0.08
• Manufacturer: A.B.S.

• Engine Code: B 4184 S8
• Fitting Position: Front Axle Left, Front Axle Right
• Required quantity: 2
• Sensor Length [mm]: 24.9
• Name: EP 1.960.005
• Manufacturer: EPS

• Braking/Drive Dynamics: for vehicles with ESP
• Sensor Type: Hall Sensor
• Number of pins: 2
• Supplementary Article/Info 2: without cable
• Corresponds to the original part in colour: blue
• Fitting Position: Front Axle
• Manufacturer: FAE

• Construction Year from: 04.2007
• Required quantity: 2
• Sensor Type: Hall Sensor
• Number of pins: 2
• Supplementary Article/Info 2: without cable
• Fitting Position: Rear Axle
• Manufacturer: FAE

• Fitting Position: Rear Axle
• Block Separation:
• Quantity: 2
• Vehicle Identification Number (VIN) from: 457494
• Sensor Type: Active sensor
• Number of occupied pins: 2
• Name: DE SS20103
• Manufacturer: DELPHI

• Number of connectors: 2
• Fitting Position: Rear Axle Left, Rear Axle Right
• Name: SW 50 94 6316
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Sensor Type: Active sensor
• Supplementary Article/Info 2: without cable
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle Left, Front Axle Right
• Block Separation:
• Number of connectors: 2
• Weight [kg]: 0.009
• Manufacturer: BLUE PRINT ELEKTRYKA

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle Left, Front Axle Right
• Block Separation:
• Number of connectors: 2
• Weight [kg]: 0.009
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year from: 04.2007
• Fitting Position: Brake Booster
• Brake System: ATE
• Manufacturer: ATE

• Required quantity: 2
• Voltage [V]: 12
• Fitting Position: Front Axle
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PU012039961
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Fitting Position: Rear Axle
• Required quantity: 2
• Voltage [V]: 12
• Number of pins: 2
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PU012039971
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Fitting Position: Rear Axle Left, Rear Axle Right
• Number of pins: 4
• Fabrication Number: HCA-FR-022

• Fitting Position: Front Axle
• Sensor Type: Active sensor
• Number of occupied pins: 2
• Manufacturer: DELPHI

• Construction Year to: 07.2010
• Fitting Position: Rear Axle
• Sensor Type: Active sensor
• Supplementary Article/Info 2: without cable
• Overall Length [mm]: 38
• Temperature range from [°C]: -40
• Temperature range to [°C]: 150
• Manufacturer: BOSCH

• Construction Year to: 07.2010
• Fitting Position: Front Axle
• Vehicle Identification Number (VIN) to: 501142
• Sensor Type: Active sensor
• Supplementary Article/Info 2: without cable
• Overall Length [mm]: 55
• Temperature range from [°C]: -40
• Temperature range to [°C]: 150
• Manufacturer: BOSCH

• Fitting Position: Front Axle Left, Front Axle Right
• Number of pins: 2
• Fitting Depth [mm]: 24.5
• Weight [kg]: 0.01
• Resistor M[ohm]: 1.3
• Manufacturer: ERA