• Supplementary Article/Supplementary Info: without EGR cooler
• Operating Mode: Electric
• Number of connectors: 5
• Fabrication Number: EGR-CT-000
• Manufacturer: NTY
• Name: NTY EGR-CT-000

• Material: Stainless Steel
• Name: TIHEND, EGR-KLAPP
• Manufacturer: FIS

• Name: Tihend, EGR-klapp
• Manufacturer: ELR

for OE number: 11 71 7 804 950, 1338675, 1439414, 1479057, 1526689, 1618.59, 1618.NR, 1682737, 36001412

• Construction Year to: 05.2010
• Engine Code: D4164T
• for article number: V22-63-0005
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: D 4164 T
• Thickness [mm]: 0.2
• Width [mm]: 41
• Length [mm]: 70
• Name: TIHEND, EGR-KLAPP
• Manufacturer: AJU

• Engine Code: D 4164 T
• Thickness [mm]: 0.2
• Width [mm]: 51
• Length [mm]: 66
• Name: TIHEND, EGR-KLAPP
• Manufacturer: AJU

• Operating Mode: Electric
• Supplementary Article/Supplementary Info: with gaskets/seals
• Valve type: Solenoid Valve
• New Part:
• Used part return not required:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Operating Mode: Electric
• Supplementary Article/Supplementary Info: with gaskets/seals
• Valve type: Solenoid Valve
• Voltage [V]: 12
• New Part:
• Used part return not required:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Engine Code: D 4164 T
• Operating Mode: Electric
• Supplementary Article/Supplementary Info: without EGR cooler
• Number of connectors: 5
• Manufacturer: DENCKERMANN FILTRY

• Operating Mode: Electric
• Emission Standard: Euro 4 (D4)
• Supplementary Article/Supplementary Info: without gasket/seal
• Manufacturer: DELLO AUTOMEGA

• Quantity: 1
• Number of connectors: 5
• Operating Mode: Electric
• Supplementary Article/Supplementary Info: with gasket/seal
• Manufacturer: ASHIKA

• Number of connectors: 5
• Manufacturer: KAMOKA

• Quantity: 1
• Number of connectors: 5
• Operating Mode: Electric
• Supplementary Article/Supplementary Info: with gasket/seal
• Manufacturer: JAPKO

• Material: Aluminium
• Number of pins: 5
• Operating Mode: Electric
• Manufacturer: NISSENS

Supplementary Article/Info 2: with sensor, without vacuum bypass, without cable, with electronics Technical Information: FIRST FIT - Includes gaskets and O-rings when needed

• Voltage [V]: 12
• Connector Shape: rectangular
• Number of pins: 5
• Operating Mode: Electric
• Supplementary Article/Supplementary Info: with gaskets/seals
• Name: EGR-KLAPP
• Manufacturer: NRF

• Operating Mode: Electric
• Supplementary Article/Supplementary Info: with gasket/seal
• Voltage [V]: 12
• Quality class: PJ
• Name: Exhaust gas recirculation valve

Supplementary Article/Info 2: with clamp, Control Unit/Software must be trained/updated

• Operating Mode: Electric
• Supplementary Article/Supplementary Info: without EGR cooler
• Manufacturer: AUTO-GH

• Construction Year to: 05.2010
• Voltage [V]: 12
• Operating Mode: Electric
• Number of pins: 5
• Guarantee: 3 years guarantee
• New Part:
• Used part return not required:
• Always compare old and new part (in particular OE No.):
• Weight [kg]: 1
• Manufacturer: SKV GERMANY
• Name: CE 14SKV202

• Voltage [V]: 12
• Connector Shape: rectangular
• Number of pins: 5
• Operating Mode: Electric
• Supplementary Article/Supplementary Info: with gaskets/seals
• Name: EGR-KLAPP
• Manufacturer: NRF

• Construction Year to: 05.2010
• Engine Code: D 4164 T
• Operating Mode: Electric
• Emission Standard: Euro 4
• Number of pins: 5
• Supplementary Article/Supplementary Info: with gaskets/seals
• Supplementary Article/Info 2: without clamp
• Name: EGR-KLAPP
• Manufacturer: MAX

• Voltage [V]: 12
• Operating Mode: Electric
• Number of pins: 5
• Used part return not required:
• Always compare old and new part (in particular OE No.):
• Weight [kg]: 0.85
• Manufacturer: ENERGY

• Operating Mode: Electric
• Supplementary Article/Supplementary Info: with gasket/seal
• Packaging length [cm]: 19
• Packaging width [cm]: 13
• Packaging height [cm]: 10
• Weight [kg]: 1
• Number of connectors: 5
• Rated Voltage [V]: 12
• Emission Standard: Euro 4 (D4)
• Valve type: Solenoid Valve
• Manufacturer: AKSDASIS

• Operating Mode: Electric
• Manufacturer: JPN

• Operating Mode: Electric
• Supplementary Article/Supplementary Info: with gaskets/seals
• Manufacturer Restriction: Valeo
• Lisainfo: EGR Valve
• Additional information: EGR Valve

• Voltage [V]: 12
• Operating Mode: Electric
• Number of pins: 5
• Manufacturer: DELPHI
• Additional information: EG10401-12B1 DELPHI
• Lisainfo: EG10401-12B1 DELPHI

• Material: Aluminium
• Number of pins: 5
• Operating Mode: Electric
• Name: EGR-klapp
• Manufacturer: NIS

Supplementary Article/Info 2: with sensor, without vacuum bypass, without cable, with electronics Technical Information: FIRST FIT - Includes gaskets and O-rings when needed

• Supplementary Article/Info 2: with cable
• Voltage [V]: 12
• Connector Shape: rectangular
• Number of pins: 5
• Operating Mode: Electric
• Supplementary Article/Supplementary Info: with gaskets/seals
• Name: EGR-klapp
• Manufacturer: NRF

• Voltage [V]: 12
• Operating Mode: Electric
• Guarantee: 3 years guarantee
• New Part:
• Used part return not required:
• Always compare old and new part (in particular OE No.):
• Weight [kg]: 1.03
• Name: CE 14SKV071
• Manufacturer: ESEN SKV

• Operating Mode: Electric
• Supplementary Article/Supplementary Info: with gasket/seal
• Required quantity: 1
• Emission Standard: Euro 4 (D4)
• Valve type: Solenoid Valve
• Number of connectors: 5
• Manufacturer: FAST

• Operating Mode: Electric
• Supplementary Article/Supplementary Info: with gasket/seal
• Quality: OE EQUIVALENT
• for OE number: 1254382
• Manufacturer: MEAT&DORIA

• Voltage [V]: 12
• Operating Mode: Electric
• Number of pins: 5
• Guarantee: 3 years guarantee
• New Part:
• Used part return not required:
• Always compare old and new part (in particular OE No.):
• Weight [kg]: 0.85
• Manufacturer: SKV GERMANY
• Name: CE 14SKV028

• Operating Mode: Electric
• Quality: OE EQUIVALENT
• for OE number: 00001618NR
• Manufacturer: MEAT & DORIA

• Operating Mode: Electric
• Supplementary Article/Supplementary Info: without gasket/seal
• Number of connectors: 5
• Manufacturer: FAST

• Operating Mode: Electric
• Supplementary Article/Supplementary Info: with gaskets/seals
• Manufacturer Restriction: Valeo
• Number of connectors: 5
• Net weight [kg]: 0.94
• Name: EGR-KLAPP
• Manufacturer: ELS

• Transmission Type: Manual Transmission
• Transmission ID: MTX75
• Operating Mode: Electric
• Observe the vehicle manufacturer specifications:
• New Part:
• Used part return not required:
• Supplementary Article/Supplementary Info: with gasket/seal
• Supplementary Article/Info 2: without cable
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of pins: 5
• Operating Mode: Electric
• Supplementary Article/Supplementary Info: with gaskets/seals, without EGR cooler
• Supplementary Article/Info 2: without vacuum bypass
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6NU014862071

Manufacturer: MAGNETI MARELLI

• Voltage [V]: 12
• Operating Mode: Electric
• Supplementary Article/Supplementary Info: with gasket/seal
• Number of connectors: 5
• Supplementary Article/Info 2: Control Unit/Software must be trained/updated
• Weight [kg]: 0.97
• Manufacturer: ERA

• Operating Mode: Electric
• Supplementary Article/Supplementary Info: with gaskets/seals
• Number of pins: 5
• Valve type: Solenoid Valve
• Voltage [V]: 12
• Emission Standard: Euro 4 (D4)
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Engine Code: D 4164 T
• New part without deposit:
• Required quantity: 1
• Operating Mode: Electric
• Emission Standard: Euro 4 (D4)
• Valve type: Solenoid Valve
• Supplementary Article/Supplementary Info: with gasket/seal
• Number of connectors: 5
• Rated Voltage [V]: 12
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Operating Mode: Electric
• Supplementary Article/Supplementary Info: without EGR cooler, with gaskets/seals
• Emission Standard: Euro 4 (D4)
• Number of pins: 5
• Supplementary Article/Info 2: without vacuum bypass, without clamp
• Name: EGR-klapp
• Manufacturer: VAL

General Information: When replacing and/or cleaning the EGR system, take care with the collar.

• Engine Code: D 4164 T
• New part without deposit:
• Required quantity: 1
• Operating Mode: Electric
• Emission Standard: Euro 4 (D4)
• Valve type: Solenoid Valve
• Supplementary Article/Supplementary Info: without EGR cooler, with gasket/seal
• Number of connectors: 5
• Rated Voltage [V]: 12
• Supplementary Article/Info 2: Control Unit/Software must be trained/updated
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Supplementary Article/Supplementary Info: with gasket/seal, with cable set
• Operating Mode: Electric
• Number of pins: 5
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA ELEKTRYKA

• Engine Code: D 4164 T
• Valve type: Solenoid Valve
• Operating Mode: Electric
• Supplementary Article/Supplementary Info: with gasket/seal
• Name: EGR-KLAPP
• Manufacturer: PIE

• for manufacturer exhaust gas norm: 5
• Supplementary Article/Supplementary Info: without gasket/seal
• Operating Mode: Electric
• Article number of recommended accessories: AGR018
• Emission Standard: Euro 4 (D4)
• Version: OE
• Alternative Repair Kit: 2324167
• Manufacturer: METZGER