• Fabrication Number: ECP-AR-013
• Manufacturer: NTY

• Operating Mode: Mechanical
• Name: ANDUR,DROSSELKLAPIASEND
• Manufacturer: MAX

• Construction Year from: 01.1995
• Number of pins: 3
• Connector Shape: rectangular
• Number of mounting bores: 2
• Rotation Direction: Anticlockwise rotation
• Supplementary Article/Info 2: without cable
• for OE number: 8945205010
• Manufacturer: MEAT&DORIA

• Number of pins: 3
• Operating Mode: Mechanical
• Manufacturer: DELPHI
• Name: DE SS10992-12B1

• Alternatively:
• Supplementary Article/Supplementary Info: with gasket/seal
• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Connector Shape: rectangular
• Weight [kg]: 0.024
• Alternative Repair Kit: 550144
• Manufacturer: ERA

• Number of connectors: 3
• Manufacturer: VERNET

• Construction Year to: 08.1996
• Number of pins: 2
• Connector Shape: rectangular
• Supplementary Article/Info 2: without cable
• for OE number: 594621
• Manufacturer: MEAT&DORIA

• Number of pins: 3
• Colour: black
• Material: Plastic
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Engine Code: B 5204 FT, B 5204 T
• Construction Year from: 01.1994, 01.1995
• Construction Year to: 07.1996, 08.1996
• Block Separation:
• Manufacturer: BOSCH

Manufacturer: MAGNETI MARELLI

Manufacturer: MAGNETI MARELLI

• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Engine Code: B 5204 FT
• Thread Size: M10x1
• Spanner Size: 19
• Manufacturer: FACET

• Engine Code: B 5204 FT
• Thread Size: M10x1
• Spanner Size: 19
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Required quantity: 1
• Number of pins: 3
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: with cable
• Housing Colour: grey
• Socket colour: white
• Manufacturer: BREMI

• Oxygen Sensor: Regulating Probe
• Number of circuits: 4
• Manufacturer: KAMOKA

• Construction Year from: 01.1994
• Name: ANDUR,DROSSELKLAPIASEND
• Manufacturer: BOS

• Length [mm]: 215
• Number of pins: 3
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: DLP

• Construction Year from: 09.1994
• Oxygen Sensor: Regulating Probe, Finger probe
• Supplementary Article/Info 2: for lead-free fuel, for leaded fuel
• Block Separation:
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: MAX
• Lisainfo: MGS-505
• Additional information: MGS-505

• Supplementary Article/Info 2: with potentiometer
• Manufacturer: METZGER

• Line insulation design: with silicone-coated woven-fibre insulation
• Length [mm]: 880
• Number of pins: 4
• Oxygen Sensor: Finger probe, Thread pre-greased
• Weight [kg]: 0.161
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Oxygen Sensor: Heated
• Cable Length [mm]: 640
• Manufacturer: FAST

• Line insulation design: with silicone-coated woven-fibre insulation
• Number of pins: 4
• Socket colour: black
• Number of circuits: 4
• Connector Shape: rectangular
• Cable Length [mm]: 730
• Thread Size: M18 x 1,5
• Weight [kg]: 0.013
• for OE number: 993 606 127 01
• Length [mm]: 850
• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Fitting Position: after catalytic converter
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year from: 01.1994
• Quality class: PJ
• Name: Air flow sensor

• Construction Year from: 01.1995
• Oxygen Sensor: Regulating Probe, Heated
• Number of pins: 4
• Cable Length [mm]: 640
• Quality: OE EQUIVALENT
• for OE number: 55351836
• Manufacturer: MEAT&DORIA

• Oxygen Sensor: Regulating Probe, Oxygen Sensor
• Construction Year from: 01.1995
• Exhaust System: before catalytic converter
• Voltage [V]: 12
• Length [mm]: 630
• Guarantee: 3 years guarantee
• Number of circuits: 4
• Weight [kg]: 0.11
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV042

• Engine Code: B 5204 FT
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 103
• Gross Weight [g]: 152
• Manufacturer: DENSO
• Name: DN DOX-0117
• Quality class: Q

Oxygen Sensor: Regulating Probe, Heated, Finger probe, Oxygen Sensor Additional information: "Tootja: DENSO
A4 AVANT (8D5, B5),
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
A4 AVANT (8D5, B5),
(kvaliteediklass: Q)"

• Oxygen Sensor: Regulating Probe, Heated
• Model Year from: 1994
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 570
• Weight [kg]: 0.102
• for OE number: 1628.8Z
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year from: 01.1995
• Number of pins: 4
• Housing Type: with housing
• Manufacturer: JP GROUP
• Lisainfo: Air Mass Sensor
• Additional information: Air Mass Sensor

• Alternatively:
• Cable Length [mm]: 550
• Oxygen Sensor: Planar probe, Heated
• Manufacturer: DELPHI ELEKTRONIKA

• Oxygen Sensor: Regulating Probe, Heated
• Fitting Position: before catalytic converter
• Construction Year from: 01.1995
• Supplementary Article/Info 2: for leaded fuel
• Length [mm]: 500
• Number of pins: 4
• Technical Information Number: Universal 77004
• Manufacturer: FAE

• Engine Code: B 5204 FT
• Oxygen Sensor: Diagnostic Probe, Heated
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 720
• Weight [kg]: 0.114
• Name: SW 33 10 3191
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year from: 01.1995
• Voltage [V]: 12
• Number of pins: 5
• Name: Ohumassimootja
• Manufacturer: MAX

• Engine Code: B 5204 T
• Line insulation design: with silicone-coated woven-fibre insulation
• Conductor Number: 4
• Cable Length [mm]: 630
• Thread Size: M18x1,5
• Length [mm]: 670
• Number of connectors: 4
• Housing Colour: black
• Oxygen Sensor: Heated, Thread pre-greased
• Weight [kg]: 0.142
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year from: 09.1993
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Slider
• Connector Shape: rectangular
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA

SVHC: 1317-36-8; Lead monoxide (lead oxide), 7439-92-1; Lead Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Construction Year from: 01.1995
• Engine Code: B 5204 FT, B 5204 T
• Line insulation design: with silicone-coated woven-fibre insulation
• Supplementary Article/Info 2: without plug
• Number of pins: 4
• for OE number: V99760001
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Length [mm]: 350
• Manufacturer: VEMO GERMANY

Oxygen Sensor: Regulating Probe, Finger probe, Heated, Thread pre-greased Fitting Position: before catalytic converter, after catalytic converter General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year from: 09.1994
• Oxygen Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Supplementary Article/Info 2: for lead-free fuel, for leaded fuel
• Block Separation:
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Oxygen Sensor: Heated
• Number of pins: 4
• Cable Length [mm]: 750
• for OE number: 0258003577
• Manufacturer: MEAT&DORIA

• Fitting Position: Front, before catalytic converter
• Oxygen Sensor: Regulating Probe, Heated, Thread pre-greased
• Line insulation design: with silicone-coated woven-fibre insulation
• Number of pins: 4
• Number of circuits: 4
• Socket colour: green
• Connector Shape: rectangular
• Thread Size: M18 x 1,5
• Weight [kg]: 0.138
• for OE number: 96 369 687 80
• Cable Length [mm]: 500
• Length [mm]: 600
• Number of connectors: 4
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year from: 01.1995
• Voltage [V]: 12
• Housing Type: with housing
• Number of pins: 4
• Guarantee: 3 years guarantee
• New Part:
• Used part return not required:
• Weight [kg]: 0.29
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Oxygen Sensor: Oxygen Sensor
• Cable Length [mm]: 510
• Number of circuits: 4
• Manufacturer: ERA

• Engine Code: B 5204 FT
• Length [mm]: 460
• Cable Length [mm]: 540
• Name: DETONATSIOONIANDUR
• Manufacturer: EPS

• Number of pins: 3
• Housing Colour: black
• Manufacturer: FAE

• Construction Year from: 01.1995
• for OE number: 0281002195
• Manufacturer: MEAT&DORIA

• for OE number: 1275749
• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 4
• Name: OHUMASSIMOOTJA
• Manufacturer: BRM

• Length [mm]: 180
• Sensor Type: Hall Sensor
• Number of pins: 3
• Supplementary Article/Info 2: with cable
• Manufacturer: FAE

• Operating Mode: Electric
• Manufacturer: MAGNETI MARELLI

• Housing Type: without housing
• Number of pins: 4
• Plug Type: Male
• Housing Colour: black/silver
• Voltage [V]: 12
• Recommended additional repairs: Air Filter
• Manufacturer: DELPHI ELEKTRONIKA

• Construction Year from: 09.1993
• Voltage [V]: 12
• Length [mm]: 160
• Sensor Type: Hall Sensor
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Name: Andur,Nukkvollipositsioon
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Construction Year from: 09.1994
• Oxygen Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Supplementary Article/Info 2: for lead-free fuel
• Number of circuits: 4
• Overall Length [mm]: 530
• Available as universal article as well, see article no.: 0258986505
• Recommended change interval [km]: 160,000
• Manufacturer: BOSCH

• Construction Year from: 01.1994
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: BOS

• Construction Year from: 09.1993
• Oxygen Sensor: Regulating Probe, Heated
• Fitting Position: before catalytic converter
• Cable Length [mm]: 530
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PA358103391
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Sensor Type: Hall Sensor
• Mounting Type: Screw Connection
• Shape: rectangular
• Number of pins: 3