• Vehicle Equipment: for vehicles with power steering
• Diameter [mm]: 10
• Filter type: In-Line Filter
• Supplementary Article/Info 2: Magnetic
• Manufacturer: JP GROUP
• Lisainfo: Hydraulic Filter, steering system
• Additional information: Hydraulic Filter, steering system

• Vehicle Equipment: for vehicles with power steering
• Diameter [mm]: 12
• Filter type: In-Line Filter
• Supplementary Article/Info 2: Magnetic
• Lisainfo: Hydraulic Filter, steering system
• Additional information: Hydraulic Filter, steering system

• Filter type: Filter Insert
• Transmission Code: DCS 6, DW5, DW6
• Transmission Type: 6-Speed Dual-Clutch Transmission
• Width [mm]: 35
• Height [mm]: 109
• Sealing Ring Diameter [mm]: 31
• Supplementary Article/Supplementary Info: with gasket/seal
• Manufacturer: KAMOKA

• Transmission Type: 6-Speed Automatic Transmission
• Filter type: Filter Insert
• Supplementary Article/Info 2: with seal ring
• See accessories list for additionally required parts:
• Fabrication Number: FSF-FR-006
• Manufacturer: NTY
• Name: NTY FSF-FR-006

• Filter type: Filter Insert
• Height [mm]: 108
• Height 1 [mm]: 101
• Inner Diameter [mm]: 14
• Transmission Code: DW5.DW6,6DCT450-MPS6
• Supplementary Article/Supplementary Info: Incl. Gasket Set
• Quality class: PJ
• Name: Automatic transmission filter

Transmission Type: Automatic Transmission, 6-Speed Automatic Transmission, Dual-Clutch Transmission

• Transmission Code: 5DCT450, Powershift
• Transmission Type: 6-Speed Automatic Transmission
• Clutch: for vehicles with double clutch
• Filter type: Filter Insert
• Supplementary Article/Info 2: with seal ring
• Recommended change interval [km]: 45,000
• Recommended change interval [years]: 5
• Name: BM FR0240
• Manufacturer: BREMSI

• for model year: 2008
• Transmission ID: TF-80SCAWD
• Specification: GENERATION II/III
• Fitting Position: Rear Axle
• Supplementary Article/Info 2: with lid, with bolts/screws
• Supplementary Article/Supplementary Info: with gasket/seal
• Manufacturer: MAX

Name: Hdraulikafilter, t„isveoga soiduki mitme kettaga sidur

• Transmission ID: TF-80SC AWD
• Model Year from: 2009
• Fitting Position: Rear Axle
• Weight [kg]: 0.1
• Guarantee: 3 years guarantee
• Always compare old and new part (in particular OE No.):
• Name: CE 31SKV390
• Manufacturer: ESEN SKV

• Height [mm]: 55
• Outer Diameter [mm]: 38
• Weight [kg]: 0.078
• Supplementary Article/Info 2: with cap, with bolts/screws
• Supplementary Article/Supplementary Info: for multi-plate clutch
• Manufacturer: BLUE PRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Transmission ID: TF-80SC AWD
• Model Year from: 2009
• Weight [kg]: 0.11
• Guarantee: 3 years guarantee
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 31SKV393

• Fitting Position: Rear Axle
• Supplementary Article/Supplementary Info: with accessories
• Clutch Type: for wet clutch
• Filter type: with housing cover, Filter Insert
• Supplementary Article/Info 2: with bolts/screws, with seal ring, with cap
• Clutch ID: HALDEX GEN IV / 4
• Fabrication Number: FHO-VV-001
• Manufacturer: NTY
• Name: NTY FHO-VV-001

• Fitting Position: Rear Axle
• Weight [kg]: 0.1
• Guarantee: 3 years guarantee
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 31SKV391

• Height [mm]: 55
• Outer Diameter [mm]: 38
• Weight [kg]: 0.078
• Supplementary Article/Supplementary Info: for multi-plate clutch
• Supplementary Article/Info 2: with cap, with bolts/screws
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Filter type: Filter Insert, with housing cover
• Supplementary Article/Info 2: with bolts/screws, with seal ring
• Number of bolts/screws: 2
• Shape: Cylindrical
• for OE number: 30787687
• Observe system fill quantity:
• Manufacturer: ENERGY

• Filter type: Filter Insert
• Height [mm]: 109
• Outer Diameter [mm]: 35
• Supplementary Article/Supplementary Info: with gasket/seal
• Manufacturer: DENCKERMANN FILTRY

• Fitting Position: Rear Axle
• Supplementary Article/Supplementary Info: with accessories
• Clutch Type: for wet clutch
• Filter type: Filter Insert, with housing cover
• Supplementary Article/Info 2: with bolts/screws, with seal ring
• Clutch ID: HALDEX GEN IV / 4
• Fabrication Number: FHO-LR-000
• Manufacturer: NTY
• Name: NTY FHO-LR-000

• Filter type: Filter Insert
• Height [mm]: 108
• Diameter [mm]: 40
• Sealing Ring Diameter [mm]: 31.8
• Inner Diameter 1 [mm]: 141
• Manufacturer: DELLO AUTOMEGA

• Height [mm]: 51
• Inner Diameter [mm]: 7
• Outer Diameter [mm]: 38
• Weight [kg]: 0.08
• Supplementary Article/Info 2: with cap, with bolts/screws
• Supplementary Article/Supplementary Info: for multi-plate clutch
• Manufacturer: BLUEPRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Inner Diameter [mm]: 7
• Height [mm]: 50.5
• Outer Diameter [mm]: 38.2
• Weight [kg]: 0.08
• Supplementary Article/Info 2: with bolts/screws, with cap
• Supplementary Article/Supplementary Info: for multi-plate clutch
• Manufacturer: FEB
• Additional information: F177900
• Lisainfo: F177900

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Hdraulikafilter, t„isveoga soiduki mitme kettaga sidur

• Fitting Position: Rear Axle
• Supplementary Article/Supplementary Info: with accessories
• Clutch Type: for wet clutch
• Filter type: with housing cover, Filter Insert
• Supplementary Article/Info 2: with seal ring, with bolts/screws
• Clutch ID: HALDEX GEN 2 & 3, HALDEX GEN II & III
• Fabrication Number: FHO-VV-000
• Manufacturer: NTY
• Name: NTY FHO-VV-000

• Fitting Position: Rear Axle
• Supplementary Article/Supplementary Info: with accessories
• Clutch Type: for wet clutch
• Filter type: with housing cover, Filter Insert
• Supplementary Article/Info 2: with bolts/screws, with seal ring
• Clutch ID: HALDEX GEN II & III, HALDEX GEN 2 & 3
• Fabrication Number: FHO-FR-000
• Manufacturer: NTY
• Name: NTY FHO-FR-000

• Fitting Position: Rear Axle
• Filter type: Filter Insert, with housing cover
• Supplementary Article/Info 2: with bolts/screws, with seal ring
• Number of bolts/screws: 2
• Shape: Cylindrical
• for OE number: 30787687
• Observe system fill quantity:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Rear Axle
• Supplementary Article/Info 2: with lid, with bolts/screws
• Supplementary Article/Supplementary Info: with gaskets/seals
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Construction Year from: 07.2008
• Supplementary Article/Info 2: with bolts/screws, with seal ring
• Fitting Position: Rear Axle
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Transmission Type: 6-Speed Automatic Transmission
• Filter type: Filter Insert
• Outer Diameter [mm]: 40
• Inner Diameter [mm]: 14
• Height [mm]: 100
• Manufacturer: HENGST FILTER
• Lisainfo: EG936H D472
• Additional information: EG936H D472

• Filter type: Filter Insert
• Diameter [mm]: 40
• Height [mm]: 107.6
• Inner Diameter 2 [mm]: 14
• Inner Diameter 3 [mm]: 31.8
• Transmission Code: 6DCT450-MPS6, DW5, DW6
• Height 1 [mm]: 101
• Packaging height [cm]: 14.5
• Packaging length [cm]: 6.5
• Packaging width [cm]: 6.5
• Net Weight [g]: 95
• Manufacturer: FILTRY KNECHT / MAHLE
• Name: KN HX151KIT
• Lisainfo: HX 151 KIT MAH
• Additional information: HX 151 KIT MAH

Transmission Type: Automatic Transmission, Dual-Clutch Transmission, 6-Speed Automatic Transmission

• for model year: 2008
• Transmission Code: TF-80SC AWD
• Specification: GENERATION II/III
• Fitting Position: Rear Axle
• Supplementary Article/Info 2: with lid, with bolts/screws
• Supplementary Article/Supplementary Info: with gasket/seal
• Manufacturer: METZGER

• Filter type: Filter Insert
• Diameter [mm]: 40
• Height [mm]: 107.6
• Inner Diameter 2 [mm]: 14
• Inner Diameter 3 [mm]: 31.8
• Transmission Code: 6DCT450-MPS6, DW5, DW6
• Height 1 [mm]: 101
• Packaging height [cm]: 14.5
• Packaging length [cm]: 6.5
• Packaging width [cm]: 6.5
• Net Weight [g]: 95
• Manufacturer: MAHLE KNECHT

Transmission Type: Automatic Transmission, Dual-Clutch Transmission, 6-Speed Automatic Transmission

• Transmission ID: TF-80SCAWD
• Model Year from: 2009
• Specification: GENERATION IV
• Supplementary Article/Info 2: with lid, with bolts/screws
• Supplementary Article/Supplementary Info: with gasket/seal
• Manufacturer: MAX

Name: Hdraulikafilter, t„isveoga soiduki mitme kettaga sidur

• Transmission Code: DW5, DW6, Powershift, 6DCT450-MPS6
• Clutch: for vehicles with double clutch
• Transmission Type: 6-Speed Automatic Transmission
• See accessories list for additionally required parts:
• Filter type: Filter Insert
• Supplementary Article/Info 2: with seal ring
• Recommended change interval [km]: 45,000
• Recommended change interval [years]: 5
• Manufacturer: VAICO
• Quality class: PJ
• Name: Automatic transmission filter

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• for model year: 2008
• Transmission ID: TF-80SC AWD
• Supplementary Article/Supplementary Info: with accessories
• Clutch ID: HALDEX GEN II & III
• Recommended change interval [years]: 3
• Recommended change interval [km]: 30,000
• Clutch Type: for wet clutch
• Filter type: with housing cover, Filter Insert
• Fitting Position: Rear Axle
• Supplementary Article/Info 2: with seal ring, with bolts/screws
• Manufacturer: VAICO
• Lisainfo: V95-0372 VAI
• Additional information: V95-0372 VAI

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Transmission Code: TF-80SC AWD
• Model Year from: 2009
• System Generation: 4
• Supplementary Article/Info 2: with lid, with bolts/screws
• Supplementary Article/Supplementary Info: with gasket/seal
• Manufacturer: METZGER

• Clutch Type: for wet clutch
• Clutch ID: HALDEX GEN IV / 4
• System Generation: 4
• Recommended change interval [years]: 3
• Supplementary Article/Supplementary Info: with accessories
• Recommended change interval [km]: 30,000
• Filter type: with housing cover, Filter Insert
• Supplementary Article/Info 2: with bolts/screws, with seal ring
• Fitting Position: Rear Axle
• Height [mm]: 55
• Outer Diameter [mm]: 38
• Manufacturer: VAICO
• Lisainfo: V95-0373 VAI
• Additional information: V95-0373 VAI

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Transmission Code: TF-80SC AWD
• Length [mm]: 297
• Width [mm]: 230
• Height [mm]: 62
• Manufacturer: HENGST FILTER