Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- General Information: round hd. screw
- Manufacturer: BORSEHUNG
- Välisläbimõõt [mm]: 32
- Manufacturer: 3RG
- Outer Diameter [mm]: 32
- Height [mm]: 8.5
-
Name: Sulgurkate,
nukkvoll - Manufacturer: ELR
- Engine Code: CFGB
- Fitting Position: frontal sided
- for OE number: 03L103085C
- Height [mm]: 10
-
Material: PTFE
(polytetrafluoroethylene) - Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Rotation Direction: Clockwise rotation
- Manufacturer: FAI
- Additional information: OS1663 FAI
- Lisainfo: OS1663 FAI
-
Engine Code: CFGB,
CLLA - Fitting Position: frontal sided
- Inner Diameter 1 [mm]: 32
- Outer Diameter 1 [mm]: 47
- Height 1 [mm]: 10
-
Swirl Type: Right-
hand Twist -
Version: PTFE POP/
ACM -
Material: PTFE
(polytetrafluoroethylene) - for OE number: 03L103085
- Manufacturer: CORTECO
- Lisainfo: 20036702B CORTECO
- Additional information: 20036702B CORTECO
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Height [mm]: 10
- Fitting Position: Cylinder Head
-
Sealing lip material: PTFE
(polytetrafluoroethylene) -
Material: ACM
(Polyacrylate) -
Swirl Type: Right-
hand Twist - Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Engine Code: CFGB,
CLLA - Fitting Position: frontal sided
- Inner Diameter 1 [mm]: 32
- Outer Diameter 1 [mm]: 47
- Height 1 [mm]: 10
-
Material: PTFE
(polytetrafluoroethylene) -
Swirl Type: Right-
hand Twist - Dust Cover: with dust lip
- for OE number: 038103085A
- Name: CO 20026413
- Manufacturer: CORTECO
- Additional information: 20026413
- Lisainfo: 20026413
- Fitting Position: frontal sided
- OE-numbri jaoks: 03L103085C
- Siseläbimõõt [mm]: 32
- Välisläbimõõt [mm]: 47
- Laius (mm): 10
- Name: DRM 01294
- Manufacturer: DR.MOTOR AUTOMOTIVE
Lühiinformatsioon: Always compare old and new part (in particular OE No.)
- Fitting Position: frontal sided
-
Engine Code: CLLA,
CFGB - Block Separation:
-
Material: FPM
(fluoride rubber) - Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Height [mm]: 10
- Radial Shaft Seal Design: A
-
Swirl Type: Right-
hand Twist - Manufacturer: REINZ
-
Fitting Position: frontal sided,
Cylinder Head - Weight [kg]: 0.011
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: frontal sided
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Height [mm]: 10
- Radial Shaft Seal Design: AW
-
Swirl Type: Right-
hand Twist - Dust Cover: without dust lip
- Observe mounting information:
- Manufacturer: ELRING
- Additional information: 897.690 ELRING
- Lisainfo: 897.690 ELRING
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) Installation Information: Mounting dry and without any additional oil and grease
- Thickness [mm]: 10
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
-
Material: ACM
(Polyacrylate) - Fitting Position: frontal sided
- Weight [kg]: 0.02
- Observe service information:
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Engine Timing: Timing Belt
- Fitting Position: Exhaust Side
- Number of Teeth: 44
- Outer Diameter [mm]: 132
- Height [mm]: 27.5
- Manufacturer: TOPRAN HANS PRIES
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- for OE number: 03G 105 021 C
- Thickness [mm]: 10
- Inner Diameter [mm]: 35
- Fitting Position: frontal sided
- Outer Diameter [mm]: 48
- Weight [kg]: 0.031
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Cylinder Head
- Weight [kg]: 0.64
-
for article number: 120-
09- 056 -
for OE number: 06H103144J,
06H103144K - Manufacturer: ABAKUS
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.
- Fitting Position: Exhaust Side
- Manufacturer: BGA
- Fitting Position: Intake Side
- Manufacturer: BGA
- Engine Code: CFGB
- Fitting Position: Intake Side
-
Pikkus (mm): 339,
9 - Name: Nukkvoll
- Manufacturer: MVE
- Engine Code: CLLA
- Fitting Position: Intake Side
- Length [mm]: 390
- Diameter [mm]: 57.85
- Name: NUKKVOLL
- Manufacturer: FRE
- Engine Code: CFGB
- Fitting Position: Exhaust Side
-
Pikkus (mm): 449,
7 - Name: Nukkvoll
- Manufacturer: MVE
- Engine Code: CLLA
- Fitting Position: Exhaust Side
- Length [mm]: 450
- Diameter [mm]: 57.85
- Name: NUKKVOLL
- Manufacturer: FRE
- Engine Code: CFGB
-
OE-numbri jaoks: 03L109022,
03L109022D - Installatsiooni pool: Väljalaskepool
-
pikkus üle kõige (mm): 449,
7 - Piirangutega toode/piirangu info 2: ilma rõngastihendita
- Manufacturer: AMC
- paired article number: 171969
- Fitting Position: Intake Side
- Weight [kg]: 1.99
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- paired article number: 176931
- Fitting Position: Exhaust Side
- Weight [kg]: 2.235
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Engine Code: CFGB
- for OE number: 03L109022D
- Material: Steel
- Valve type: for exhaust valves
-
Additionally required articles (article numbers): BFS174S,
R190S - Name: FAI C348
- Manufacturer: FAI
- Engine Code: CFGB
- for OE number: 03L109021D
- Material: Steel
- Valve type: for inlet valves
-
Additionally required articles (article numbers): BFS174S,
R190S - Name: FAI C347
- Manufacturer: FAI
-
Engine Code: CFGB,
CLLA - Block Separation:
- Fitting Position: Intake Side
- Version: gegossen
- Manufacturer: KOLBENSCHMIDT
-
Engine Code: CFGB,
CLLA - Block Separation:
- Fitting Position: Exhaust Side
- Version: gegossen
- Manufacturer: KOLBENSCHMIDT
- Engine Code: CFGB
-
OE-numbri jaoks: 03L109022,
03L109022D - Installatsiooni pool: Väljalaskepool
- Piirangutega toode/piirangu info 2: ilma rõngastihendita
- Manufacturer: AMC
- Engine Code: CFGB
- Fitting Position: Inlet
- Material: Steel
- Manufacturer: FEDERAL MOGUL
- Engine Code: CFGB
- Fitting Position: Exhaust Side
- Material: Steel
- Manufacturer: FEDERAL MOGUL
- Fitting Position: Inlet
- Manufacturer: BGA
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks