Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Number of connectors: 4
Lisainfo: Relay for fuel pump and intake manifold heating, 12 Volt, 40 Amp Additional information: Relay for fuel pump and intake manifold heating, 12 Volt, 40 Amp
- Thickness [mm]: 2
- Inner Diameter [mm]: 31
- Outer Diameter [mm]: 35
-
Material: FKM
(fluorocarbon rubber) -
Shape: O-
Ring - Weight [kg]: 0.001
- Manufacturer: FEBI BILSTEIN
- Quantity per packing unit: 10
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
for PR number: TF0,
TU1, TL1 - Inner Diameter [mm]: 31
- Thickness [mm]: 2
-
Material: FPM
(fluoride rubber) - Manufacturer: METZGER
- Quantity per packing unit: 25
- Inner Diameter [mm]: 31.5
- Outer Diameter [mm]: 35.5
- Thickness [mm]: 2
-
Material: FPM
(fluoride rubber) -
Shape: O-
Ring - Manufacturer: ELRING
- Quantity: 1
- Weight [kg]: 0.035
- Required quantity: 1
- Number of connectors: 4
- General Information: fuel pump relay
- Manufacturer: VIKA
- Thickness [mm]: 2
- Inner Diameter [mm]: 31.5
-
Shape: O-
Ring - Manufacturer: DR MOTOR
- Name: DRM 0286
- Voltage [V]: 12
- Number of pins: 4
- Capacity at 12V: 40A
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- General Information: relay
- Manufacturer: BORSEHUNG
- General Information: relay
- Manufacturer: BORSEHUNG
-
Relay Number: 67,
80, 167 - Number of connectors: 4
- Weight [kg]: 0.035
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Height [mm]: 8.65
-
Material: FKM
(fluorocarbon rubber) - Inner Diameter [mm]: 113
- Outer Diameter [mm]: 134.2
-
Fabrication Number: BPP-
VW- 005 - Manufacturer: NTY
-
Name: NTY BPP-
VW- 005
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Inner Diameter [mm]: 114
-
Material: NBR
(nitrile butadiene rubber) - Fitting Position: in fuel tank
- Colour: black
- Fuel Supply: Fit together with the fuel feed unit
- Manufacturer: ELRING
- Inner Diameter [mm]: 113
-
Material: FPM
(fluoride rubber) - Fitting Position: in fuel tank
- Colour: red
- Fuel Supply: Fit together with the fuel feed unit
- Manufacturer: ELRING
- Current Strength [A]: 40
-
Relay function: Terminal 30,
Clamp 87 - Rated current [A]: 40
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Inner Diameter [mm]: 113
- Height [mm]: 8.65
- Outer Diameter [mm]: 134.2
-
Material: FKM
(fluorocarbon rubber) - Weight [kg]: 0.035
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Outer Diameter [mm]: 25.56
- Height [mm]: 29.22
- Fitting Position: Cylinder Head
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Vehicle Identification Number (VIN) from: 3C-
C- 700 001 - Voltage [V]: 12
- Assy./disassy. by qualified personnel required!:
- Manufacturer: HELLA
- Name: HE 4RP008189151
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Outer Diameter [mm]: 26
- Weight [kg]: 0.049
- General Information: tappet
- Manufacturer: BORSEHUNG
- Required quantity: 1
- Diameter [mm]: 25.56
- Height [mm]: 29.22
- SVHC: No SVHC present!
- Manufacturer: INA
- Name: LU 711024410
- Outer Diameter [mm]: 26
- Weight [kg]: 0.049
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Additionally required articles (article numbers): 133056
- Guarantee: 5 years guarantee
-
General Information: Sold in Hueco brand:
printing and packaging - Manufacturer: HITACHI
for article number: 133061, 133062, 133063, 133064, 133069, 133070, 133071, 133072, 133082
-
Fabrication Number: EPW-
VW- 000 - Manufacturer: NTY
-
Name: NTY EPW-
VW- 000
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Housing Colour: black
- Guarantee: 5 years guarantee
-
General Information: Sold in Hueco brand:
printing and packaging - Name: HU 132900
-
Manufacturer: HUECO /
HITACHI
- Voltage [V]: 12
- Number of pins: 5
- Number of connectors: 8
- Rated current [A]: 10
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Engine Code: CKMA
-
Vehicle Identification Number (VIN) from: 3C-
C- 700 001 - Fuel Type: Petrol
- Supplementary Article/Info 2: with filter
- Fuel Supply: Fit together with the fuel feed unit
- Vehicle Equipment: for vehicles without parking heater
- Manufacturer: VDO
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks