Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Fitting Position: Rear Axle both sides
- General Information: protective pipe
- Manufacturer: BORSEHUNG
- Fitting Position: Rear Axle
- Axle: Independent wheel suspension
- Material: Thermoplast
- Height [mm]: 230
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: Front Axle both sides
- General Information: dust boot
- Manufacturer: BORSEHUNG
- Thickness [mm]: 230
- Material: Thermoplast
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Weight [kg]: 0.07
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Kaitsekaan/kaitsekumm - Vedrustus/amordid VW T. AUDI/SKODA/SEAT
- Thickness [mm]: 230
- Material: Thermoplast
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Name: SW 30 94 5893
- Manufacturer: SWAG
- Lisainfo: 30 94 5893 SWA
- Additional information: 30 94 5893 SWA
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Front Axle Left,
Front Axle Right - Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
-
not for PR number: G05,
G06 - Block Separation:
- Thickness [mm]: 172
- Material: Thermoplastic polyester elastomer
-
Fitting Position: Front Axle Left,
Front Axle Right - Weight [kg]: 0.07
-
Name: KAITSEMTS/
KAITSEKUMM, AMORT - Manufacturer: FEB
- Lisainfo: 46720 FEBI
- Additional information: 46720 FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Rear Axle,
Rear Axle Right, Rear Axle Left - Shock Absorber Type: Gas Pressure
-
Shock Absorber System: Twin-
Tube - Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber Mounting Type: Bottom eye,
Top pin -
Manufacturer: AUTO-
GH
Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles with bad road version, for vehicles with increased ground clearance, for vehicles without height-adjustable suspension, for vehicles without electronic suspension control
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
- General Information: shock absorber; rear
- Manufacturer: VIKA
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
-
Shock Absorber System: Twin-
Tube - Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber Mounting Type: Bottom eye,
Top pin - Distance of mounting bores [mm]: 59
- Replace in pairs only:
- Name: AMORT
- Manufacturer: MEY
- Lisainfo: 1267250017
- Additional information: 1267250017
Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles with increased ground clearance, for vehicles without electronic suspension control
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
-
Shock Absorber System: Twin-
Tube -
Shock Absorber Mounting Type: Top pin,
Bottom eye - Shock Absorber Design: Telescopic Shock Absorber
- Piston Rod Diameter [mm]: 13
- Shock absorber eyelet diameter [mm]: 59
- max. length [mm]: 625
- Name: Amort
- Manufacturer: KYB
- Additional information: 3448024 KAYABA
- Lisainfo: 3448024 KAYABA
Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles with bad road version, for vehicles with increased ground clearance, for vehicles without height-adjustable suspension, for vehicles without electronic suspension control General Information: Please refer to the technical drawing in "Documents"
-
Shock Absorber System: Normal Suspension,
Twin- Tube - Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
-
Shock Absorber Mounting Type: Top pin,
Bottom Clamp - Diameter [mm]: 55
- Manufacturer: KAVO PARTS
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
-
Shock Absorber System: Twin-
Tube - Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
-
Article number of recommended accessories: 100 640 0017,
100 412 0141 - Housing diameter in clamping area [mm]: 55
- Replace in pairs only:
- Name: Amort
- Manufacturer: MEY
-
Fitting Position: Front Axle,
Front Axle Right, Front Axle Left - Shock Absorber Type: Gas Pressure
-
Shock Absorber System: Twin-
Tube -
Article number of recommended accessories: GH-
394366, GH- 369964, GH- 399961, GH- 693610 - Shock Absorber Design: Suspension Strut
-
Shock Absorber Mounting Type: Top pin,
Bottom Yoke - Suspension Strut Outer Diameter [mm]: 55
-
Manufacturer: AUTO-
GH
Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles with increased ground clearance, for vehicles without electronic suspension control
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
-
Shock Absorber System: Twin-
Tube - Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
- Suspension Strut Outer Diameter [mm]: 55
- Manufacturer: KAYABA AMORTYZATORY
- Name: KY 3358015
Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles with increased ground clearance, for vehicles without electronic suspension control
- Fitting Position: Rear Axle
- Suspension: for vehicles without electronic suspension control
- Check OE number:
- Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber System: Twin-
Tube - Shock Absorber Type: Gas Pressure
-
Parameter: SEOV30/
13X170A -
Shock Absorber Mounting Type: Top pin,
Bottom eye -
Axle: Four-
Link Axle - Name: Amort
- Manufacturer: SAA
- Lisainfo: 318 202
- Additional information: 318 202
- Fitting Position: Front Axle
- Suspension: for vehicles without electronic suspension control
- Check OE number:
- Shock Absorber Design: Suspension Strut
-
Shock Absorber System: Twin-
Tube - Shock Absorber Type: Gas Pressure
-
Parameter: ST36/
25X167A - Shock Absorber Mounting Type: Top pin
- Housing Diameter [mm]: 55
- Name: Amort
- Manufacturer: SAA
- Fitting Position: Front Axle
- Suspension: for vehicles with electronic suspension control
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber System: Electronically adjustable shock strength
-
Shock Absorber Mounting Type: Top pin,
Bottom Clamp - Weight [kg]: 5.568
- Operating Mode: Electronic
- Guarantee: 5 years guarantee
- Packaging length [cm]: 59.1
- Packaging width [cm]: 20.7
- Packaging height [cm]: 21.2
- Name: Amort
- Manufacturer: MON
- Fitting Position: Rear Axle
-
Axle: Multi-
link Axle - Suspension: for vehicles with electronic suspension control
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Damper without Rebound Spring
- Shock Absorber System: Electronically adjustable shock strength
-
Shock Absorber Mounting Type: Bottom eye,
Top pin - Weight [kg]: 4.2
- Operating Mode: Electronic
- Guarantee: 5 years guarantee
- Packaging length [cm]: 69.6
- Packaging width [cm]: 13.3
- Packaging height [cm]: 13.6
- Name: Amort
- Manufacturer: MON
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber Mounting Type: Top pin,
Bottom eye - Manufacturer: BORSEHUNG
General Information: gas-filled shock absorber; electronically controlled; front
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks