• Fitting Position: Front Axle Left, Front Axle Right, Lower
• Manufacturer: JP GROUP
• Lisainfo: Ball joint for wishbone, front, left/right
• Additional information: Ball joint for wishbone, front, left/right

• for PR number: 1BA, 1BB, 1BC, 1BJ, 1BL, 1BQ, 1BV
• Model Year from: 2016
• Fitting Position: Lower, outer, Front Axle both sides
• Weight [kg]: 0.023
• Packaging length [cm]: 4.5
• Packaging width [cm]: 4.5
• Packaging height [cm]: 2.9
• Manufacturer: FEBEST

• Fitting Position: Front Axle, Lower
• for OE number: 7H8 407 361
• Cone Size [mm]: 18
• Supplementary Article/Info 2: with bolts/screws
• Manufacturer: KAMOKA

• Vehicle type: Caravelle, Multivan
• Block Separation:
• Diameter [mm]: 41.6
• Thread Size 1: M14X1,5 RHT
• Cone Size [mm]: 18
• paired article number: 220416
• Weight [kg]: 0.496
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

Fitting Position: Front Axle, outer, Lower, Front Axle Left, Front Axle Right

• Fitting Position: Front Axle, Lower
• for OE number: 7E0407361
• Cone Size [mm]: 18
• Supplementary Article/Info 2: with bolts/screws
• Manufacturer: KAMOKA

• Block Separation:
• Diameter [mm]: 41.6
• Cone Size [mm]: 18
• Thread Size 1: M14X1,5
• Manufacturer: OYODO

Fitting Position: Front Axle, outer, Lower, Front Axle Left, Front Axle Right

• Fitting Position: Front Axle Left, Front Axle Right, Lower
• Cone Size [mm]: 18
• Thread Size 1: M14X1,5
• Manufacturer: GSP

• Fitting Position: Lower, Front Axle Left, Front Axle Right
• Bore Diameter [mm]: 41.6
• Cone Size [mm]: 18.3
• Thread Size 1: M14X1,5
• Manufacturer: GSP

• Fabrication Number: ZSD-VW-007
• Manufacturer: NTY

Fitting Position: Front Axle, outer, Front Axle Left, Front Axle Right, Lower

• Fitting Position: Front Axle Left, Front Axle Right
• External Thread [mm]: M14x1,5
• Cone Size [mm]: 22
• Manufacturer: MERTZ

• for PR number: 1BA, 1BB, 1BJ, 1BQ, 1BV, 2MD, 2MF, 2MG, 2MH
• Fitting Position: Front Axle, Lower
• Cone Size [mm]: 22
• Name: Liigend - K„„ndmik VW P. T5 DOLNY 03- LE/PR
• Manufacturer: MAX
• Lisainfo: MGZ-401028
• Additional information: MGZ-401028

• for PR number: 2MR, 2MT
• Fitting Position: Front Axle Left, Front Axle Right, Lower
• Manufacturer: JP-GROUP
• Lisainfo: Ball joint for wishbone, front, left/right
• Additional information: Ball joint for wishbone, front, left/right

• Fitting Position: Front Axle, outer
• Vehicle type: Caravelle, Multivan
• Block Separation:
• Cone Size [mm]: 22
• Net weight [kg]: 0.67
• Name: Liigend - K„„ndmik VW P. T5 DOLNY 03- LE/PR
• Manufacturer: NK

for PR number: 1BA, 1BB, 1BJ, 1BL, 1BQ, 2MD, 2MF, 2MG, 2MH, 2MK, 2ML

• Fitting Position: Front Axle
• Guarantee: 3 years guarantee
• Weight [kg]: 0.54
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Fitting Position: Front Axle Right, Front Axle Left
• Length [mm]: 80
• Base body material: Cast Iron
• Net weight [kg]: 0.65
• Thread Size: RHT M14x1,5
• Thread Size 1: RHT M14x8,5
• Name: OMG G30.7322
• Manufacturer: OMG

• Weight [kg]: 0.7
• Required quantity: 2
• Flange Hole Diameter [mm]: 41.4
• Packaging length [cm]: 13.5
• Packaging width [cm]: 9.5
• Packaging height [cm]: 7
• Manufacturer: MONROE

Fitting Position: Front Axle, Front Axle Left, Front Axle Right, outer, Lower

• Fitting Position: Front Axle Right, Front Axle Left
• Length [mm]: 77
• Base body material: Cast Iron
• Net weight [kg]: 0.65
• Thread Size: RHT M14x1,5
• Thread Size 1: RHT M14x7,5
• Name: OMG G30.7324
• Manufacturer: OMG

• Fitting Position: Front Axle, outer
• Vehicle type: Caravelle
• Shock Absorber System: Normal Suspension
• for PR number: 1BH, 2MQ, 2MR, 2MT, 2MU
• Net weight [kg]: 0.56
• Name: Liigend - K„„ndmik VW P. T5 DOLNY 03- LE/PR 3,2 T.
• Manufacturer: NK

• Fitting Position: Front Axle, outer, Lower
• Block Separation:
• Thread Size: M14x1.5
• Length [mm]: 105
• Width [mm]: 55
• Height [mm]: 95
• Manufacturer: DELPHI
• Name: DE TC2089
• Additional information: TC2089 DELPHI
• Lisainfo: TC2089 DELPHI

Suspension: for vehicles with lowered suspension, for vehicles with electronic suspension control, for vehicles with heavy duty suspension, for vehicles with increased spring tension for PR number: 1BC, 2MD, 2MH, 1BL, 1BQ, 1BB, 1BJ, 2MG, 2MK, 2ML, 1BA, 2MF

• Fitting Position: Front Axle
• Cone Size [mm]: 18.1, 22.1
• Thread Size: M14 x 1.5
• Mounting points diameter [mm]: 13
• Name: ALT 80393AL
• Manufacturer: ALTE AUTOMOTIVE

• for PR number: 2MR, 2MT
• Cone Size [mm]: 22
• Name: Liigend - K„„ndmik VW P. T5 DOLNY 03- LE/PR 3,2 T.
• Manufacturer: MAX
• Lisainfo: MGZ-401039
• Additional information: MGZ-401039

Fitting Position: Front Axle, Lower, Front Axle Right, Front Axle Left

• for PR number: 1BA, 1BB, 1BJ, 1BQ, 1BV, 2MD, 2MF, 2MG, 2MH
• Fitting Position: Front Axle, Lower
• Cone Size [mm]: 22
• Name: Liigend - K„„ndmik VW P. T5 DOLNY 03- LE/PR
• Manufacturer: QUARO

• for PR number: 1BA, 1BB, 1BC, 1BJ, 1BL, 1BQ, 1BV
• Model Year from: 2016
• Fitting Position: Lower Front Axle
• Weight [kg]: 0.54
• Packaging length [cm]: 10.3
• Packaging width [cm]: 9.5
• Packaging height [cm]: 5.4
• Manufacturer: FEBEST

• Vehicle type: Caravelle, Multivan
• Fitting Position: outer, Front Axle, Lower
• Block Separation:
• Required quantity: 2
• Flange Hole Diameter [mm]: 41.4
• Name: Kande-/juhtliigend
• Manufacturer: TRI
• Lisainfo: VW MULTIVAN, TRANSPORTER T
• Additional information: VW MULTIVAN, TRANSPORTER T

Suspension: for vehicles with standard suspension, for vehicles with lowered suspension, for vehicles with heavy duty suspension, for vehicles with electronic suspension control for PR number: 1BA, 2MF, 1BC, 2MD, 2MH, 1BB, 1BJ, 2MG, 2MK, 2ML, 1BL, 1BQ

• for vehicles with gross vehicle weight [t]: 2.6, 2.8, 3
• Block Separation:
• Hub mounting bore diameter [mm]: 41.5
• External Thread Size: M14 x 1,5
• Cone Size 1 [mm]: 18
• Cone Size 2 [mm]: 21
• Mounting points diameter [mm]: 13
• Control/Trailing Arm Type: for control arm
• Fitting Position: Front Axle Left, Lower, Front Axle Right
• Weight [kg]: 0.449
• Supplementary Article/Supplementary Info: with lock nut
• Observe service information:
• Name: Liigend - K„„ndmik VW P. T5 DOLNY 03- LE/PR
• Manufacturer: FEB
• Lisainfo: 23336 FEBI
• Additional information: 23336 FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle Left, Front Axle Right
• Cone Size [mm]: 18.1
• Manufacturer: FAST

General Information: 5-year warranty FAST offers up to 5 years warranty on this product, throughout the entire EU. The guarantee covers manufacturing and material defects. In the event of problems, we will refund you for the part or replace it with a new one. Details and warranty restrictions can be found at fastoriginal.eu

• Fitting Position: Lower Front Axle, outer
• Supplementary Article/Supplementary Info: with accessories
• Length [mm]: 88.5
• Cone Size [mm]: 22
• Cone Pitch: 1:6
• Thread Size: M14x1.5
• Outer Diameter [mm]: 41.5
• Manufacturer: TRW
• Additional information: JBJ749 TRW
• Lisainfo: JBJ749 TRW

for PR number: 1BA, 1BB, 1BC, 1BJ, 1BL, 1BQ, 2MD, 2MF, 2MG, 2MH, 2MK, 2ML

• Fitting Position: Front Axle, Lower
• for OE number: 7E0407361A
• Manufacturer: SASIC

• Fitting Position: Lower Front Axle, both sides, outer
• Cone Pitch: 1:6
• Length [mm]: 88.5
• Thread Size: M14x1.5
• Cone Size [mm]: 22
• Outer Diameter [mm]: 41.5
• Manufacturer: PROFIPOWER

• Fitting Position: Front Axle, Lower
• Weight [kg]: 0.552
• max. length [mm]: 100
• Width [mm]: 56
• Height [mm]: 95
• Material: Steel
• Quality class: PJ
• Name: Control arm ball joint left=right

• for vehicles with gross vehicle weight [t]: 2.6, 2.8, 3
• Block Separation:
• Fitting Position: outer, Lower Front Axle
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front Axle, outer, Lower
• Suspension: for vehicles with increased spring tension
• for PR number: 1BH, 2MQ, 2MR, 2MT, 2MU
• Thread Size: M14x1.5
• Length [mm]: 104
• Width [mm]: 54
• Height [mm]: 96
• Manufacturer: DELPHI
• Name: DE TC2186

• for vehicles with gross vehicle weight [t]: 2.6, 2.8, 3
• Block Separation:
• Hub mounting bore diameter [mm]: 41.5
• External Thread Size: M14 x 1,5
• Cone Size 2 [mm]: 21
• Cone Size 1 [mm]: 18
• Mounting points diameter [mm]: 13
• Control/Trailing Arm Type: for control arm
• Fitting Position: Front Axle Left, Lower, Front Axle Right
• Weight [kg]: 0.449
• Supplementary Article/Supplementary Info: with lock nut
• Observe service information:
• Name: SW 32 92 3336
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for vehicles with gross vehicle weight [t]: 2.6, 2.8, 3
• Block Separation:
• Hub mounting bore diameter [mm]: 41.5
• External Thread Size: M14 x 1,5
• Cone Size 1 [mm]: 18
• Cone Size 2 [mm]: 21
• Mounting points diameter [mm]: 13
• Control/Trailing Arm Type: for control arm
• Fitting Position: Front Axle Left, Lower, Front Axle Right
• Weight [kg]: 0.655
• Supplementary Article/Info 2: with bolts/screws
• Supplementary Article/Supplementary Info: with lock nut
• Observe service information:
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Liigend - K„„ndmik VW P. T5 DOLNY 03- LE/PR ZE —RUBAMI

• Gross vehicle weight [kg]: 3,000, 2,600, 2,800, 2,850
• Fitting Position: Lower, Front Axle both sides
• Required quantity: 2
• paired article number: VKDS 311017
• Cone Size [mm]: 22.1
• Cone Size 1 [mm]: 18.1
• Supplementary Article/Supplementary Info: with synthetic grease
• Thread Size 1: M14 x 1,5
• Manufacturer: SKF
• Name: SK VKDS311017

• Fitting Position: Front Axle
• Gross vehicle weight [kg]: 3,200
• Cone Size [mm]: 18.3
• SVHC: No SVHC present!
• Name: Kande-/juhtliigend
• Manufacturer: FAG

• Fitting Position: Lower, Front Axle Left, Front Axle Right
• Thread Size: M14x1,5
• Supplementary Article/Supplementary Info: with accessories
• replacement in pairs recommended:
• Required quantity: 2
• Name: Liigend - K„„ndmik VW P. T5 DOLNY 03- LE/PR
• Manufacturer: MEY

General Information: With mounting materials, to fit most models. Please check fit accuracy before installation.

• for vehicles with gross vehicle weight [t]: 2.6, 2.8, 3
• Block Separation:
• Hub mounting bore diameter [mm]: 41.5
• External Thread Size: M14 x 1,5
• Cone Size 1 [mm]: 18
• Cone Size 2 [mm]: 21
• Mounting points diameter [mm]: 13
• Control/Trailing Arm Type: for control arm
• Fitting Position: Front Axle Left, Lower, Front Axle Right
• Weight [kg]: 0.655
• Supplementary Article/Supplementary Info: with lock nut
• Supplementary Article/Info 2: with bolts/screws
• Observe service information:
• Name: SW 30 93 0858
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Gross vehicle weight [kg]: 3,200
• Fitting Position: Front Axle both sides, Lower
• Required quantity: 2
• paired article number: VKDS 311018
• Cone Size [mm]: 22.2
• Cone Size 1 [mm]: 18.2
• Thread Size 1: M14x1,5
• Manufacturer: SKF
• Name: SK VKDS311018

• Manufacturer: CORTECO

Fitting Position: Front Axle, Front Axle Right, Front Axle Left, Lower

• for PR number: 1BH, 2MQ, 2MR, 2MT, 2MU
• Model Year from: 2016
• Fitting Position: Front Axle
• Weight [kg]: 3.309
• Packaging length [cm]: 9.9
• Packaging width [cm]: 9.5
• Packaging height [cm]: 5.6
• Manufacturer: FEBEST

• Fitting Position: Front Axle
• not for gross vehicle weight [kg]: 3,200
• Cone Size [mm]: 18.3
• Distance of mounting bores [mm]: 80
• SVHC: No SVHC present!
• Manufacturer: FAG-ELEMENTY ZAWIESZENIA

• for PR number: 1BA, 1BB, 1BJ, 1BQ, 1BV, 2MD, 2MF, 2MG, 2MH
• Fitting Position: Lower, Front Axle Left, Front Axle Right
• Thread Size: M14x1,5
• Supplementary Article/Supplementary Info: with accessories
• reinforced version:
• replacement in pairs recommended:
• Required quantity: 2
• Name: Liigend - K„„ndmik VW P. T5 DOLNY 03- LE/PR HD
• Manufacturer: MEY

General Information: With mounting materials, to fit most models. Please check fit accuracy before installation.

• Fitting Position: Front Axle both sides, Lower
• External Thread 2 [mm]: M14x1,5
• Weight [kg]: 0.624
• Manufacturer: RTS

• for vehicles with gross vehicle weight [t]: 3.2
• Hub mounting bore diameter [mm]: 45
• External Thread Size: M14 x 1,5
• Cone Size [mm]: 22
• Mounting points diameter [mm]: 13
• Control/Trailing Arm Type: for control arm
• Fitting Position: Front Axle Left, Lower, Front Axle Right
• Weight [kg]: 0.49
• Supplementary Article/Supplementary Info: with lock nut
• Observe service information:
• Name: Kande-/juhtliigend
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for PR number: 2MR
• Fitting Position: Front Axle Right, Front Axle Left, Lower
• Manufacturer: CORTECO

• Construction Year from: 09.2016
• for PR number: 2MR, 2MT
• Supplementary Article/Supplementary Info: with accessories
• Fitting Position: Front Axle Left, Front Axle Right, Lower, outer
• Length [mm]: 97
• Thread Size: M14x1,5
• Cone Size [mm]: 18.5
• Cone Pitch: 1:6
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• for vehicles with gross vehicle weight [t]: 3.2
• Hub mounting bore diameter [mm]: 45
• External Thread Size: M14 x 1,5
• Cone Size [mm]: 22
• Mounting points diameter [mm]: 13
• Control/Trailing Arm Type: for control arm
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.572
• Supplementary Article/Info 2: with bolts/screws
• Supplementary Article/Supplementary Info: with lock nut
• Observe service information:
• Name: Kande-/juhtliigend
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for PR number: 1BA, 1BB, 1BJ, 1BQ, 1BV, 2MD, 2MF, 2MG, 2MH
• Fitting Position: Lower, Front Axle Right, Front Axle Left
• Cone Size [mm]: 22
• Article number of recommended accessories: 37476 01
• Name: Liigend - K„„ndmik VW P. T5 DOLNY 03- LE/PR
• Manufacturer: LMI

• Fitting Position: Lower Front Axle, outer
• for PR number: 1BH, 1BW, 1BX, 2MQ, 2MR, 2MT, 2MU
• Supplementary Article/Supplementary Info: with accessories
• Length [mm]: 88.5
• Cone Size [mm]: 20.5
• Cone Pitch: 1:6
• Thread Size: M14x1,5
• Outer Diameter [mm]: 45
• Manufacturer: TRW

• for PR number: 2MR, 2MT
• Fitting Position: Lower, Front Axle Left, Front Axle Right
• Thread Size: M14x1,5
• Supplementary Article/Supplementary Info: with accessories
• reinforced version:
• replacement in pairs recommended:
• Required quantity: 2
• Name: Liigend - K„„ndmik VW P. T5 DOLNY 03- LE/PR 3,2 T.
• Manufacturer: MEY

General Information: With mounting materials, to fit most models. Please check fit accuracy before installation.

• for PR number: 2MR, 2MT
• Fitting Position: Lower, Front Axle Right, Front Axle Left
• Cone Size [mm]: 22
• Article number of recommended accessories: 37476 01
• Name: Liigend - K„„ndmik VW P. T5 DOLNY 03- LE/PR 3,2 T.
• Manufacturer: LMI