• Supplementary Article/Supplementary Info: with gasket/seal
• Manufacturer: JP GROUP
• Lisainfo: Water pump
• Additional information: Water pump

• Construction Year to: 12.2019, 02.2021
• Vehicle type: Transporter, Kombi
• Driven Units: Camshaft
• Article number of the recommended special tool: GAT4840A, GAT4844
• Block Separation:
• Construction Year from: 10.2015
• Supplementary Article/Supplementary Info: with water pump
• Observe technical data:
• Manufacturer: GATES
• Lisainfo: KP25649XS-1 GAT
• Additional information: KP25649XS-1 GAT

• Supplementary Article/Info 2: with plug
• Number of pins: 2
• for OE number: 4F0973702
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Number of pins: 2
• for OE number: 4F0973702
• Manufacturer: ABAKUS
• Lisainfo: ABA120-00-243
• Additional information: ABA120-00-243

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fabrication Number: CPW-VW-051
• Manufacturer: NTY

• for OE number: 03L 121 011
• Number of Teeth: 19
• Water Pump Type: for timing belt drive
• Manufacturer: KAMOKA

• Number of Teeth: 19
• Number of blades/vanes: 8
• Manufacturer: JPN

• reinforced version:
• Model Year from: 2009
• Packaging length [cm]: 11.2
• Packaging width [cm]: 11.2
• Packaging height [cm]: 11.2
• Weight [kg]: 0.68
• Manufacturer: AKSDASIS

• Water Pump Type: for timing belt drive
• Water pump impeller material: Thermoplast
• Supplementary Article/Info 2: with water pump seal ring
• Operating Mode: Mechanical
• Manufacturer: ASHIKA

• Vehicle configuration line / variant: TB
• for OE number: 03L121011PX
• Belt Pulley Ø [mm]: 56
• Height 1 [mm]: 28.5
• Weight [kg]: 1.1
• Name: DA DP206
• Manufacturer: DAYCO

• Water pump impeller material: Plastic
• Seal Material: Rubber
• Material: Cast Aluminium
• Number of Teeth: 19
• Number of blades/vanes: 8
• Weight [kg]: 0.725
• Supplementary Article/Supplementary Info: with gasket/seal
• Observe service information:
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• New Part:
• for model code: Transporter
• Engine Code: CAAC
• Vehicle configuration line / variant: TDi BlueMotion
• Block Separation:
• Exchange Part:
• reinforced version:
• Model Year from: 2009
• Manufacturer: DOLZ
• Name: DO A224

• Operating Mode: Mechanical
• Water Pump Type: for timing belt drive
• Water pump impeller material: Aluminium
• Supplementary Article/Supplementary Info: with gasket/seal
• Supplementary Article/Info 2: with seal ring
• for OE number: 5972251
• Quality class: PJ
• Name: Water pump

• Number of Teeth: 19
• Operating Mode: Mechanical
• Supplementary Article/Info 2: with seal ring
• Number of blades/vanes: 8
• Water Pump Pulley Diameter [mm]: 56.23
• Impeller Diameter [mm]: 63.4
• Water Pump Type: for timing belt drive
• Water pump impeller material: Plastic
• Manufacturer: GRAF

• Water pump impeller material: Plastic
• Seal Material: Rubber
• Material: Cast Aluminium
• Number of Teeth: 19
• Number of blades/vanes: 8
• Weight [kg]: 0.725
• Supplementary Article/Supplementary Info: with gasket/seal
• Observe service information:
• Name: SW 30 93 6048
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Water Pump Type: for timing belt drive
• Number of Teeth: 19
• SVHC: No SVHC present!
• Manufacturer: INA
• Name: LU 538006010
• Lisainfo: 538006010
• Additional information: 538006010

• Weight [kg]: 0.722
• Packaging length [cm]: 13
• Packaging width [cm]: 13
• Packaging height [cm]: 16
• Manufacturer: CONTINENTAL CTAM

• Voltage [V]: 12
• Operating Mode: Electric
• for OE number: 5N0965561
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Water Pump Type: for timing belt drive
• Water pump impeller material: Plastic
• Supplementary Article/Supplementary Info: with gaskets/seals
• Number of Teeth: 19
• Manufacturer: SKF

• Operating Mode: Mechanical
• Supplementary Article/Supplementary Info: with gasket/seal
• Water pump impeller material: Metal
• Number of Teeth: 19
• Water Pump Pulley Diameter [mm]: 56
• Number of blades/vanes: 8
• Impeller Diameter [mm]: 64
• Manufacturer: HEPU

• Pulleys: with belt pulley
• Supplementary Article/Info 2: without lid
• Supplementary Article/Supplementary Info: with gaskets/seals
• Manufacturer: VALEO
• Name: VA 506974

• General Information: solenoid valve
• Manufacturer: VIKA

• Voltage [V]: 12
• Operating Mode: Electric
• Fabrication Number: CPZ-VW-015
• Manufacturer: NTY

• Operating Mode: Electric
• Voltage [V]: 12
• Vehicle Equipment: for vehicles with auxiliary water pump
• Manufacturer: FAST

General Information: 5-year warranty FAST offers up to 5 years warranty on this product, throughout the entire EU. The guarantee covers manufacturing and material defects. In the event of problems, we will refund you for the part or replace it with a new one. Details and warranty restrictions can be found at fastoriginal.eu

• Operating Mode: Electric
• Voltage [V]: 12
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Name: HE 8TW358304751
• Manufacturer: HELLA

• Fitting Position: Front
• Manufacturer Restriction: PIERBURG
• Operating Mode: Electric
• Manufacturer: DOLZ
• Name: DO EA511A

• Version: 1
• Fitting Position: Front
• Connector Shape: oval
• Material: Plastic
• Operating Mode: Electric
• Voltage [V]: 12
• Manufacturer: NISSENS
• Name: NI 831072

• Fitting Position: Front
• Operating Mode: Electric
• Manufacturer: NRF

• Vehicle configuration line / variant: AUX
• for OE number: 7E0965561F
• Operating Mode: Electric
• Name: DA DEP1017
• Manufacturer: DAYCO

• for combined PR number: 7VA+9M5, 7VG+9M5
• for PR number: 7VE, 7VL, 8Z4, 8Z5, 8Z6, 8Z7, 8Z9
• Block Separation:
• Operating Mode: Electric
• Rated Voltage [V]: 12
• Number of pins: 3
• Connector Shape: oval
• Housing Colour: black
• Hose Diameter [mm]: 20
• Housing Type: Synthetic Material Housing
• Housing material: GRP (Glass fibre Reinforced Plastic)
• Observe system fill quantity:
• Consult accessories list for recommended additional repairs:
• Manufacturer: TOPRAN

Vehicle Equipment: for vehicles with parking heater, for vehicles without parking heater, for vehicles with auxiliary water pump Transmission Type: Manual Transmission, 7-Speed Automatic Transmission General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Operating Mode: Electric
• Number of pins: 3
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Construction Year to: 12.2019, 02.2021
• Vehicle type: Transporter, Kombi
• Block Separation:
• Construction Year from: 10.2015
• Number of pins: 3
• Pin Shape: Flat
• Plug Type: Male
• Supplementary Article/Info 2: without clip
• Operating Mode: Electric
• Manufacturer: GATES

• Fitting Position: Rear
• Connector Shape: D Shape
• Material: Plastic
• Operating Mode: Electric
• Voltage [V]: 12
• Manufacturer: NISSENS

Installation Information: FIRST FIT - a time-saving installation! Find all additional parts such as brackets in the box when mounted in exposed position

• Fitting Position: Front
• Operating Mode: Electric
• Voltage [V]: 12
• for OE number: 7E0 965 561 F
• Manufacturer: HEPU

• Production date to: 02.04.2017
• Operating Mode: Electric
• Voltage [V]: 12
• Manufacturer: PIERBURG

• Voltage [V]: 12
• Number of connectors: 2
• Material: Plastic
• Weight [kg]: 0.36
• for OE number: 7P0 965 561 D
• Observe service information:
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear
• Operating Mode: Electric
• Manufacturer: DOLZ
• Name: DO EA568A

• Number of Teeth: 160
• Width [mm]: 25
• Number of belts: 1
• Weight [kg]: 2.28
• for article number: A224
• Manufacturer: DOLZ
• Name: DO KD100

• Supplementary Article/Supplementary Info: with holder
• SVHC: No SVHC present!
• Manufacturer: INA-POMPY WODY

• Construction Year to: 11.2019
• Length [mm]: 1,524
• Number of Teeth: 160
• Width [mm]: 25
• Tooth Pitch [mm]: 9.525
• Pulleys contained: 4
• Manufacturer: BOSCH
• Name: BS 1987946943

• Construction Year to: 12.2019, 02.2021
• Vehicle type: Transporter, Kombi
• Block Separation:
• Construction Year from: 10.2015
• Number of pins: 2
• Pin Shape: Flat
• Plug Type: Male
• Operating Mode: Electric
• Manufacturer: GATES

• Width [mm]: 25
• Number of Teeth: 160
• Surface: Coated
• Belts: with rounded tooth profile
• Weight [kg]: 2.63
• for OE number: 03L 198 119 F S1
• Observe service information:
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of Teeth: 160
• Width [mm]: 25
• Number of belts: 1
• for article number: 570043N
• Packaging length [cm]: 28
• Packaging width [cm]: 17.5
• Packaging height [cm]: 17.5
• Weight [kg]: 2.442
• Manufacturer: AKSDASIS

• Number of belts: 1
• Width 1 [mm]: 25
• Number of track rollers: 4
• Number of Teeth: 160
• Manufacturer: SNR
• Name: SN KDP457.720

• Article number of the recommended special tool: VKN 1000
• Number of bolts/screws: 2
• Water pump impeller material: Plastic
• Belt Width [mm]: 25
• Supplementary Article/Supplementary Info: with gaskets/seals
• Supplementary Article/Info 2: with studs
• Number of Teeth: 160
• Name: SK VKMC01148-2
• Manufacturer: SKF
• Lisainfo: VKMC 01148-2 SKF
• Additional information: VKMC 01148-2 SKF

• Number of Teeth 1: 160
• Width 1 [mm]: 25
• Observe service information:
• Follow installation instructions:
• SVHC: No SVHC present!
• Manufacturer: INA
• Name: LU 530055032
• Lisainfo: 530055032
• Additional information: 530055032

• Construction Year to: 03.2017
• Operating Mode: Electric
• for OE number: 5N0 965 561
• Voltage [V]: 12
• Pressure [bar]: 0.1
• Flow rate [l/h]: 730
• Manufacturer: BOSCH

• Width [mm]: 25
• Number of Teeth: 160
• Surface: Coated
• Belts: with rounded tooth profile
• Weight [kg]: 2.63
• for OE number: 03L 198 119 F S1
• Observe service information:
• Name: SW 30 94 5116
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of Teeth 1: 160
• Width 1 [mm]: 25
• Water Pump Type: for timing belt drive
• Manufacturer: METELLI ROZRZAD

• Number of belts: 1
• Width [mm]: 25
• Number of Teeth: 160
• Number of tension rollers: 1
• Number of deflection pulleys: 3
• Supplementary Article/Info 2: with bolts/screws
• Supplementary Article/Supplementary Info: with camshaft screws
• Manufacturer: HEPU

• Driven Units: Camshaft
• Packaging length [cm]: 19.5
• Packaging width [cm]: 18.2
• Packaging height [cm]: 18.7
• Number of Teeth: 160
• Weight [kg]: 2.622
• Width [mm]: 25
• Supplementary Article/Supplementary Info: with camshaft screws
• Manufacturer: CONTITECH

Technical Information: Appropriate crankshaft bolt(s) available separately. See section belt pulley crankshaft (bolt set)

• for PR number: 9M0, 9M5
• Operating Mode: Electric
• Voltage [V]: 12
• Number of inlets/outlets: 2
• Manufacturer: METZGER

• Driven Units: Camshaft, Oil Pump
• Packaging length [cm]: 19.5
• Packaging width [cm]: 18.2
• Packaging height [cm]: 18.7
• Weight [kg]: 2.752
• Width 1 [mm]: 25
• Width 2 [mm]: 9.2
• 2 Belts:
• Number of Teeth 2: 59
• Number of Teeth 1: 160
• Supplementary Article/Supplementary Info: with camshaft screws
• Engine Timing: Timing belt in the oil bath
• Manufacturer: CONTITECH

Technical Information: Appropriate crankshaft bolt(s) available separately. See section belt pulley crankshaft (bolt set)

• Number of Teeth 1: 160
• Width 1 [mm]: 25
• Water Pump Type: for timing belt drive
• Manufacturer: GRAF

• Production date to: 02.04.2017
• for OE number: 5N0965561
• Operating Mode: Electric
• Manufacturer Restriction: PIERBURG
• Alternative Repair Kit: 2221050
• Manufacturer: METZGER

• Driven Units: Camshaft
• Width [mm]: 25
• Operating Mode: Mechanical
• Supplementary Article/Supplementary Info: with water pump
• Pulleys contained: 4
• Supplementary Article/Info 2: with fastening material
• Number of belts: 1
• Number of Teeth: 160
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.