• SVHC: No SVHC present!
• Name: Keermehlss,vedruamort
• Manufacturer: FAG

• Fitting Position: Front Axle
• SVHC: No SVHC present!
• Manufacturer: FAG-ELEMENTY ZAWIESZENIA

• Fitting Position: Front Axle
• Height [mm]: 65
• Manufacturer: JP GROUP
• Lisainfo: Tower rubber stop
• Additional information: Tower rubber stop

• Fitting Position: Front Axle
• Manufacturer: JP GROUP
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

• Fitting Position: Front Axle
• SVHC: No SVHC present!
• Manufacturer: FAG

• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.031
• Width [mm]: 97
• Inner Diameter [mm]: 46
• Outer Diameter [mm]: 76
• Manufacturer: 3RG

• Suspension: for vehicles without heavy duty suspension
• Thickness [mm]: 65
• Material: Rubber
• Fitting Position: Front Axle
• Weight [kg]: 0.051
• Name: PUHVER, VEDRUSTUS
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Thickness [mm]: 13
• Outer Diameter [mm]: 19.5
• Internal Thread Size: M14 x 1,5
• Fitting Position: Front Axle
• Weight [kg]: 0.016
• Name: Mutter - Rattad PODUSZKI AMORT. VW P. GOLF 2/A80
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Height [mm]: 65
• Required quantity: 2
• replacement in pairs recommended:
• Name: PUHVER, VEDRUSTUS
• Manufacturer: MEY

Suspension: for vehicles without bad road version, for vehicles without sports suspension

• Quantity per packing unit: 2
• Fitting Position: Rear Axle
• Height [mm]: 146
• Weight [kg]: 0.11
• Weight [g]: 110
• Manufacturer: METALCAUCHO

• Fitting Position: Front Axle
• SVHC: No SVHC present!
• Manufacturer: FAG

• Specification: Type: universal
• Diameter [mm]: 12
• Fitting Position: Front Axle
• Manufacturer: ASHIKA

• Quantity per packing unit: 2
• Fitting Position: Rear Axle
• Thickness [mm]: 155
• Required quantity: 2
• Weight [kg]: 0.263
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Thickness [mm]: 160
• Material: PU (Polyurethane)
• Fitting Position: Rear Axle
• Weight [kg]: 0.098
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Specification: Type: universal
• Diameter [mm]: 12
• Fitting Position: Front Axle
• Manufacturer: JAPKO

• Fitting Position: Front Axle
• Name: TOLMUKAITSE KOMPLEKT,AMORDID
• Manufacturer: MAX

• Fitting Position: Rear Axle
• Name: CFD PK4795
• Manufacturer: DACO

• Fitting Position: Rear Axle
• Name: TOLMUKAITSE KOMPLEKT,AMORDID
• Manufacturer: MAX

• Fitting Position: Front Axle
• Manufacturer: KAMOKA AMORTYZATORY

• Fitting Position: Rear Axle
• Manufacturer: KAMOKA AMORTYZATORY

• Fitting Position: Front Axle
• Component Number: ugu
• Manufacturer: KAMOKA AMORTYZATORY

• Construction Year from: 01.1982
• Suspension: for vehicles without bad road version
• Fitting Position: Front Axle
• Overall Height [mm]: 210
• Manufacturer: ASHIKA

• Name: Shock absorber protection kit left+right
• Quality class: Q

Lisainfo: "Tootja: POLCAR
SEAT CORDOBA (6K2)
(kvaliteediklass: PJ)"

• Specification: Type: universal
• Diameter [mm]: 12
• Fitting Position: Front Axle
• Name: TOLMUKAITSE KOMPLEKT,AMORDID
• Manufacturer: JPA

• Fitting Position: Rear Axle
• Manufacturer: JP GROUP

• Installatsiooni pool: Tagasild
• Kõrgus (mm): 90
• Lisainfo: Dust Cover Kit, shock absorber
• Additional information: Dust Cover Kit, shock absorber

• Construction Year to: 03.1983
• Suspension: for vehicles with standard suspension
• Vehicle Identification Number (VIN) to: 32-D-155 157
• Fitting Position: Front Axle both sides
• Name: Shock absorber protection kit left+right
• Quality class: PJ

Lisainfo: "Tootja: SRL
SEAT/VW
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
SEAT/VW
(kvaliteediklass: PJ)"

• Construction Year from: 01.1982
• Suspension: for vehicles without bad road version
• Quantity per packing unit: 2
• Fitting Position: Front Axle
• Name: TOLMUKAITSE KOMPLEKT,AMORDID
• Manufacturer: KYB
• Additional information: KYB910088
• Lisainfo: KYB910088

• Fitting Position: Front Axle, Front Axle both sides
• Name: Shock absorber protection kit left+right
• Quality class: PJ

Lisainfo: "Tootja: SRL
SEAT/VW
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
SEAT/VW
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle
• Manufacturer: DENCKERMANN AMORTYZATORY

• Quantity Unit: Set
• Fitting Position: Rear Axle
• Weight [kg]: 0.254
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year from: 01.1982
• Suspension: for vehicles without bad road version
• Fitting Position: Front Axle
• Overall Height [mm]: 210
• Name: Tolmukaitse komplekt,Amordid
• Manufacturer: JPA

• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Weight [kg]: 0.3
• Guarantee: 5 years guarantee
• Packaging length [cm]: 22
• Packaging width [cm]: 11
• Packaging height [cm]: 18
• Manufacturer: MONROE

• Name: Shock absorber protection kit left+right
• Quality class: Q

Lisainfo: "Tootja: POLCAR
SEAT TOLEDO I (1L)
(kvaliteediklass: Q)"

• Fitting Position: Front Axle
• Quantity Unit: Set
• Name: TOLMUKAITSE KOMPLEKT,AMORDID
• Manufacturer: MEY

• Fitting Position: Front Axle Left, Front Axle Right
• Fabrication Number: AB-VW-010
• Manufacturer: NTY

• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Quantity: 2
• Manufacturer: KAVO PARTS

• Fitting Position: Rear Axle
• Quantity per packing unit: 2
• Weight [kg]: 0.4
• Guarantee: 5 years guarantee
• Packaging length [cm]: 22
• Packaging width [cm]: 11
• Packaging height [cm]: 18
• Manufacturer: MONROE

• Material: PU (Polyurethane)
• Fitting Position: Rear Axle
• Weight [kg]: 0.154
• Name: PUHVER, VEDRUSTUS
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Manufacturer: DENCKERMANN AMORTYZATORY

• Fitting Position: Rear Axle, Rear Axle both sides
• Name: Shock absorber protection kit left+right
• Quality class: PJ

Lisainfo: "Tootja: SRL
VOLKS./SKODA/SEAT
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
VOLKS./SKODA/SEAT
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle
• Name: TOLMUKAITSE KOMPLEKT,AMORDID
• Manufacturer: SAA

SVHC: No information available, please contact the manufacturer!

• Material: PU (Polyurethane)
• Fitting Position: Front Axle
• Weight [kg]: 0.215
• Name: SW 30 56 0011
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Name: TOLMUKAITSE KOMPLEKT,AMORDID
• Manufacturer: SAA

SVHC: No information available, please contact the manufacturer!

• for OE number: 6U0513423
• Fitting Position: Rear Axle
• Manufacturer: AUTOFREN SEINSA
• Name: SE D5-006

• Fitting Position: Front Axle
• for OE number: 191412303A
• Name: SE D5-016
• Manufacturer: AUTOFREN SEINSA

• Fitting Position: Rear Axle
• Quantity Unit: Set
• Name: TOLMUKAITSE KOMPLEKT,AMORDID
• Manufacturer: MEY

• Fitting Position: Rear Axle
• Quantity per packing unit: 2
• Height [mm]: 144.45
• Quantity per axle: 1
• Inner Diameter 1 [mm]: 10.3
• Inner Diameter 2 [mm]: 13.7
• Name: SK VKDP43100T
• Manufacturer: SKF

• Construction Year to: 03.1983
• Vehicle Identification Number (VIN) to: 32-D-155 157
• Suspension: for vehicles with standard suspension
• Fitting Position: Front Axle
• Manufacturer: BILSTEIN
• Name: BI 11-101307
• Quality class: Q

Additional information: "Tootja: BILSTEIN
AUDI/ VW
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
AUDI/ VW
(kvaliteediklass: Q)"

• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Quantity per axle: 1
• Manufacturer: SKF

• Construction Year to: 03.1983
• Vehicle Identification Number (VIN) to: 32-D-155 157
• Suspension: for vehicles with standard suspension
• Fitting Position: Rear Axle
• Manufacturer: BILSTEIN
• Name: BI 11-101352
• Quality class: Q

Lisainfo: "Tootja: BILSTEIN
SEAT/ VW
(kvaliteediklass: Q)"

• Fitting Position: Front Axle
• Manufacturer: AUTOFREN SEINSA

• Name: Shock absorber protection kit left+right
• Quality class: Q

Lisainfo: "Tootja: BILSTEIN
SEAT/ VW
(kvaliteediklass: Q)"