• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: JP GROUP
• Lisainfo: Protective Cap/Bellow, shock absorber
• Additional information: Protective Cap/Bellow, shock absorber

• Fitting Position: Front Axle
• Weight [kg]: 0.07
• Material: Thermoplast
• Required quantity: 2
• Outer Diameter [mm]: 68, 80
• General Information: protective pipe; front
• Manufacturer: VIKA

• Outer Diameter [mm]: 68, 80
• Material: Thermoplast
• Fitting Position: Front Axle
• Weight [kg]: 0.07
• Name: Kaitsemts/kaitsekumm,amort
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Outer Diameter [mm]: 68, 80
• Material: Thermoplast
• Fitting Position: Front Axle
• Weight [kg]: 0.07
• Name: SW 30 93 6006
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Model Year from: 2016
• Fitting Position: Front Axle
• Weight [kg]: 0.108
• Packaging length [cm]: 19
• Packaging width [cm]: 7.8
• Packaging height [cm]: 7.8
• Height [mm]: 200
• Manufacturer: FEBEST

• Fitting Position: Front Axle
• Material: Thermoplast
• Manufacturer: FAST

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Bottom eye, Top eye
• Shock Absorber System: Twin-Tube
• Manufacturer: KAMOKA

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Absorber does not carry a spring
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Shock Absorber System: Twin-Tube
• Name: AMORT
• Manufacturer: MAX
• Lisainfo: MGA-5714
• Additional information: MGA-5714

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Bottom eye, Top eye
• Shock Absorber System: Twin-Tube
• Manufacturer: KAMOKA AMORTYZATORY

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Telescopic Shock Absorber
• Manufacturer: ASHIKA-AMORTYZATORY

• Vehicle type: G02
• for PR number: G07, G08
• Shock Absorber Type: Gas Pressure
• Fitting Position: Rear Axle
• Shock Absorber Design: Absorber does not carry a spring
• Shock Absorber Mounting Type: Bottom eye, Top eye
• Shock Absorber System: Twin-Tube
• Name: Gas shock absorber
• Quality class: PJ

Suspension: for vehicles with sports suspension, for vehicles with standard suspension Lisainfo: "Tootja: SRL
VW CADDY III
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
VW CADDY III
(kvaliteediklass: PJ)"

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Manufacturer: KAVO

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Telescopic Shock Absorber
• Manufacturer: JAPKO

• Axle: Reinforced wheel suspension
• Payload: for increased payload
• Fitting Position: Rear Axle, Rear Axle Right, Rear Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Manufacturer: AUTO-GH

Suspension: for vehicles with standard suspension, for vehicles with heavy duty suspension, for vehicles with lowered suspension

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Telescopic Shock Absorber
• Name: AMORT
• Manufacturer: JPA

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Shock Absorber System: Twin-Tube
• Manufacturer: KAMOKA

• Axle: Reinforced wheel suspension
• Fitting Position: Front Axle, Front Axle Right, Front Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Suspension Strut Outer Diameter [mm]: 55
• Manufacturer: AUTO-GH

Suspension: for vehicles with standard suspension, for vehicles with heavy duty suspension, for vehicles with lowered suspension

• Fitting Position: Front Axle
• Suspension: for vehicles with standard suspension
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Bottom Pin
• Shock Absorber System: Twin-Tube
• Housing diameter in clamping area [mm]: 55
• Manufacturer: DENCKERMANN AMORTYZATORY

• Suspension: for vehicles with lowered suspension
• Vehicle configuration line / variant: Eco
• Fitting Position: Front Axle
• Shock Absorber Design: Suspension Strut
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin
• Shock Absorber System: Twin-Tube
• Name: AMORT
• Manufacturer: MAX

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Replace in pairs only:
• Name: AMORT
• Manufacturer: MEY

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Housing Diameter [mm]: 55
• Manufacturer: OYODO

• Fitting Position: Front Axle
• Suspension: for vehicles with standard suspension
• Shock Absorber Design: Suspension Strut
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin
• Diameter [mm]: 55
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Weight [kg]: 1.8
• Bore Diameter [mm]: 25
• Length 1 [mm]: 314
• Length 2 [mm]: 452
• Piston Rod Diameter [mm]: 12.4
• Article number of recommended accessories: PK448
• Packaging length [cm]: 60
• Packaging width [cm]: 7.2
• Packaging height [cm]: 7.2
• Manufacturer: MONROE

Guarantee: 5 years guarantee with accessories when replaced in pairs

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Diameter 1/Diameter 2 [mm]: 25/55
• Article number of recommended accessories: SMA0148
• Shock Absorber Mounting Type: Top pin
• Manufacturer: ASHIKA

• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Fitting Position: Rear Axle
• Shock Absorber Design: Telescopic Shock Absorber
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Lisainfo: Shock Absorber
• Additional information: Shock Absorber

Suspension: for vehicles with standard suspension, for vehicles with heavy duty suspension

• Fitting Position: Front Axle
• Suspension: for vehicles with lowered suspension
• Vehicle configuration line / variant: Eco
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Housing Diameter [mm]: 55
• Shock Absorber Mounting Type: Bottom Pin
• Shock Absorber System: Twin-Tube
• Manufacturer: DENCKERMANN AMORTYZATORY

• Fitting Position: Front Axle
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Diameter 1 [mm]: 25
• Diameter 2 [mm]: 55
• Spring Type: for vehicles with coil spring suspension
• Name: MM 4319G
• Manufacturer: MAGNETI MARELLI

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Diameter 1/Diameter 2 [mm]: 25/55
• Article number of recommended accessories: SMJ0148
• Shock Absorber Mounting Type: Top pin
• Manufacturer: JAPKO
• Lisainfo: MJ00031 JAPKO
• Additional information: MJ00031 JAPKO

• Shock Absorber Type: Gas Pressure
• Fitting Position: Front Axle
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Bottom Plate, Top pin
• Shock Absorber System: Twin-Tube
• Quality class: PJ
• Name: Gas shock absorber

Suspension: for vehicles with lowered suspension, for vehicles with heavy duty suspension

• Axle: Reinforced wheel suspension
• Payload: for increased payload
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Telescopic Shock Absorber
• Name: AMORT
• Manufacturer: KYB

Suspension: for vehicles with standard suspension, for vehicles with heavy duty suspension, for vehicles with lowered suspension

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin
• Diameter [mm]: 25, 54
• Manufacturer: KAVO PARTS

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Weight [kg]: 4
• Bore Diameter [mm]: 32
• Observe technical data:
• Length 1 [mm]: 391
• Length 2 [mm]: 553
• Piston Rod Diameter [mm]: 22
• Article number of recommended accessories: MK194, PK163
• Packaging length [cm]: 51.5
• Packaging width [cm]: 16.2
• Packaging height [cm]: 16.2
• Housing diameter in clamping area [mm]: 55
• Manufacturer: MONROE

Guarantee: 5 years guarantee with accessories when replaced in pairs

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Article number of recommended accessories: 100 640 0007, 100 412 2039/S, 100 412 2039
• Replace in pairs only:
• Name: AMORT
• Manufacturer: MEY

Suspension: for vehicles with standard suspension, for vehicles with heavy duty suspension

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Diameter 1/Diameter 2 [mm]: 25/55
• Article number of recommended accessories: SM0148
• Shock Absorber Mounting Type: Top pin
• Name: AMORT
• Manufacturer: JPA

• Axle: Reinforced wheel suspension
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Shock Absorber System: Twin-Tube
• Suspension Strut Outer Diameter [mm]: 55
• Piston Rod Diameter [mm]: 25
• Name: AMORT
• Manufacturer: KYB
• Additional information: KYB335808
• Lisainfo: KYB335808

Suspension: for vehicles with standard suspension, for vehicles with heavy duty suspension, for vehicles with lowered suspension Technical Information: Please refer to the technical drawing in "Documents"

• Vehicle type: G02
• for PR number: G07, G08
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Absorber does not carry a spring
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Shock Absorber System: Twin-Tube
• Name: AMORT
• Manufacturer: BIL

Suspension: for vehicles with standard suspension, for vehicles with sports suspension Lisainfo: "Tootja: BILSTEIN
VW CADDY III 04-
(kvaliteediklass: Q)"

• Fitting Position: Rear Axle
• Suspension: for vehicles with heavy duty suspension
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Parameter: SE30/12X158A
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Name: AMORT
• Manufacturer: SAA
• Lisainfo: 313 320
• Additional information: 313 320

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Suspension: for vehicles with lowered suspension
• Vehicle configuration line / variant: Eco
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Parameter: SFE36/25X157A
• Housing Diameter [mm]: 55
• Shock Absorber Mounting Type: Top pin
• Name: AMORT
• Manufacturer: SAA

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Suspension: for vehicles with standard suspension
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Parameter: SFE36/25X164A
• Housing Diameter [mm]: 55
• Shock Absorber Mounting Type: Top pin
• Name: Amort
• Manufacturer: SAA

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Suspension: for vehicles with lowered suspension
• not for vehicle configuration line / variant: Eco
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Parameter: SFE36/25X157A
• Housing Diameter [mm]: 55
• Shock Absorber Mounting Type: Top pin
• Name: AMORT
• Manufacturer: SAA

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Bottom Plate, Top pin
• Shock Absorber System: Twin-Tube
• Manufacturer: BILSTEIN
• Name: BI 22-183750
• Quality class: Q

Suspension: for vehicles with lowered suspension, for vehicles with heavy duty suspension Additional information: "Tootja: BILSTEIN
VW TIGUAN 07-
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
VW TIGUAN 07-
(kvaliteediklass: Q)"