Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
Lisainfo: (AM) Mehaaniline pump vana andur ei sobi
- Driven Units: Camshaft
- Manufacturer: BGA
- Number of belts: 1
- Width 1 [mm]: 25
- Number of track rollers: 3
- Number of Teeth: 145
- Manufacturer: SNR
- Name: SN KD457.79
- Additional information: KD457.79 SNR
- Lisainfo: KD457.79 SNR
- Width 1 [mm]: 25
- Number of track rollers: 3
- Number of belts: 1
- Number of Teeth: 145
- Name: SN KD457.85
- Manufacturer: SNR
- Driven Units: Camshaft
-
Vehicle configuration line / variant: HT -
KTB - Number of Teeth: 145
- Width [mm]: 25
-
Length [mm]: 1,
381 - Number of belts: 1
- Pulleys contained: 3
- Weight [kg]: 1.4
- Name: Hammasrihma komplekt
- Manufacturer: DAY
- Driven Units: Camshaft
-
Vehicle configuration line / variant: HT -
DAWA # DA - for OE number: 04L198119K
- Number of Teeth: 145
- Width [mm]: 25
-
Length [mm]: 1,
381 - Full Set:
- Number of belts: 1
- Pulleys contained: 3
- Weight [kg]: 1.3
- Name: HAMMASRIHMA KOMPLEKT
- Manufacturer: DAY
- Belt Width [mm]: 25
-
Belt Material: PTFE
(polytetrafluoroethylene) - Colour: black
- Number of Teeth: 145
- Belts: with rounded tooth profile
- Name: HAMMASRIHMA KOMPLEKT
- Manufacturer: SKF
- Number of Teeth 1: 145
- Width 1 [mm]: 25
- Observe service information:
- Follow installation instructions:
- SVHC: No SVHC present!
- Name: HAMMASRIHMA KOMPLEKT
- Manufacturer: INA
-
Construction Year from: 07.2017,
07.2018 -
Vehicle type: Crafter 35,
Crafter 50, Crafter 55 - Driven Units: Camshaft
-
Article number of the recommended special tool: GAT5170,
GAT5247, GAT4844 - Block Separation:
- Supplementary Article/Supplementary Info: without water pump
- Name: Hammasrihma komplekt
- Manufacturer: GAT
- Lisainfo: K015678XS GAT
- Additional information: K015678XS GAT
- Number of Teeth: 145
-
Length [mm]: 1,
381 - Width [mm]: 25
- Tooth Pitch [mm]: 9.525
- Number of track rollers: 3
- Supplementary Article/Info 2: not for dusty operating conditions
- Name: HAMMASRIHMA KOMPLEKT
- Manufacturer: BOS
-
Emission Standard: Euro 5,
Euro 6 - Width [mm]: 25
- Number of Teeth: 145
- Belts: with rounded tooth profile
- Weight [kg]: 0.984
-
Belt Material: HNBR
(hydrogenated nitrile butadiene rubber) - for OE number: 04L 109 119 D S7
- Observe service information:
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Width of castor bearing surface [mm]: 25
- Number of Teeth: 145
-
Supplementary Article/Supplementary Info: with fastening/
mounting material - Belts: with rounded tooth profile
- Weight [kg]: 1.049
-
Belt Material: HNBR
(hydrogenated nitrile butadiene rubber) - Observe service information:
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Driven Units: Camshaft
- Emission Standard: Euro 6
- Block Separation:
- Construction Year from: 07.2018
- Vehicle type: Crafter 55
- Packaging length [cm]: 26.5
- Packaging width [cm]: 16.5
- Packaging height [cm]: 9.5
- Weight [kg]: 1.3
- Number of Teeth: 145
- Width [mm]: 25
- Name: Hammasrihma komplekt
- Manufacturer: CON
Technical Information: Appropriate crankshaft bolt(s) available separately. See section belt pulley crankshaft (bolt set)
- Driven Units: Camshaft
- Emission Standard: Euro 5
- Block Separation:
- Construction Year from: 07.2018
- Vehicle type: Crafter 55
- Packaging length [cm]: 26.5
- Packaging width [cm]: 16.5
- Packaging height [cm]: 9.5
- Weight [kg]: 1.3
- Number of Teeth: 145
- Width [mm]: 25
- Name: Hammasrihma komplekt
- Manufacturer: CON
Technical Information: Appropriate crankshaft bolt(s) available separately. See section belt pulley crankshaft (bolt set)
- Number of Teeth: 145
- Belts: with rounded tooth profile
- Weight [kg]: 1.072
- Observe service information:
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Water Pump Type: for timing belt drive
- Number of bolts/screws: 1
- Water pump impeller material: Plastic
- Belt Width [mm]: 25
-
Supplementary Article/Supplementary Info: with gaskets/
seals - Number of Teeth: 145
- Name: Veepump hammasrihmakomplekt
- Manufacturer: SKF
Supplementary Article/Info 2: with studs, without integrated disabling contact, non-switchable water pump
- Width [mm]: 25
- Water pump impeller material: Metal
- Number of Teeth: 145
-
Supplementary Article/Supplementary Info: with fastening/
mounting material -
Supplementary Article/Info 2: non-
switchable water pump - Belts: with rounded tooth profile
- Weight [kg]: 2.021
- Observe service information:
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Number of Teeth: 145
- Belts: with rounded tooth profile
- Observe service information:
- Name: SW 30 94 8290
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Number of Teeth 1: 145
- Width 1 [mm]: 25
-
Supplementary Article/Info 2: non-
switchable water pump - Observe service information:
- Follow installation instructions:
- SVHC: No SVHC present!
- Name: Veepump hammasrihmakomplekt
- Manufacturer: INA
- Driven Units: Camshaft
-
Vehicle configuration line / variant: HT -
DAWA - Number of Teeth: 145
- Width [mm]: 25
-
Length [mm]: 1,
381 - Full Set:
- Number of belts: 1
- Pulleys contained: 3
- Weight [kg]: 2.3
-
Supplementary Article/Info 2: non-
switchable water pump - Name: Veepump hammasrihmakomplekt
- Manufacturer: DAY
-
Construction Year from: 07.2017,
07.2018 -
Vehicle type: Crafter 35,
Crafter 50, Crafter 55 - Driven Units: Camshaft
-
Article number of the recommended special tool: GAT5170,
GAT5247, GAT4844 - Block Separation:
- Supplementary Article/Supplementary Info: with water pump
- Observe technical data:
- Name: Veepump hammasrihmakomplekt
- Manufacturer: GAT
- Lisainfo: KP15678XS GAT
- Additional information: KP15678XS GAT
-
Driven Units: Water Pump,
Camshaft - Number of belts: 1
- Width [mm]: 25
- Number of Teeth: 145
- Pulleys contained: 3
- Manufacturer: HEPU
Supplementary Article/Info 2: non-switchable water pump, without integrated disabling contact, with bolts/screws
- Width [mm]: 25
-
Number of Teeth: 145,
53 -
Supplementary Article/Supplementary Info: with fastening/
mounting material - Belts: with rounded tooth profile
- Weight [kg]: 1.284
- Observe service information:
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Driven Units: Camshaft
- Emission Standard: Euro 6
- Block Separation:
- Construction Year from: 07.2018
- Vehicle type: Crafter 55
- Packaging length [cm]: 19.5
- Packaging width [cm]: 18.2
- Packaging height [cm]: 18.7
- Number of Teeth: 145
- Weight [kg]: 1.959
- Width 1 [mm]: 25
- Name: Veepump hammasrihmakomplekt
- Manufacturer: CON
Supplementary Article/Info 2: non-switchable water pump, without integrated disabling contact
- Width of castor bearing surface [mm]: 26
- Water pump impeller material: Plastic
- Number of Teeth: 145
-
Supplementary Article/Supplementary Info: with fastening/
mounting material - Supplementary Article/Info 2: switchable water pump
- Belts: with rounded tooth profile
- Weight [kg]: 1.899
-
Belt Material: HNBR
(hydrogenated nitrile butadiene rubber) - for OE number: 04L 198 119 K S2
- Name: SW 33 11 0491
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks