• for PR number: 1KU, 1KZ, 2EM, 2ER
• Fitting Position: Rear Axle
• Brake System: Teves
• Height 1 [mm]: 61.2
• Height 2 [mm]: 56.2
• Width [mm]: 123
• Thickness [mm]: 16.4
• Wear Warning Contact: excl. wear warning contact
• Lisainfo: Brake Pad Set, disc brake
• Additional information: Brake Pad Set, disc brake

• Filter type: In-Line Filter
• Housing material: Plastic
• Height [mm]: 143
• Outer Diameter [mm]: 62
• Pipe Diameter [mm]: 8
• Weight [kg]: 0.07
• Observe service information:
• Name: KšTUSEFILTER
• Manufacturer: BLP

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Filter type: In-Line Filter
• Housing material: Plastic
• Height [mm]: 142.5
• Outer Diameter [mm]: 62
• Pipe Diameter [mm]: 8
• Weight [kg]: 0.07
• Name: KšTUSEFILTER
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Height [mm]: 136.5
• Outer Diameter [mm]: 55
• Outer Diameter 1 [mm]: 62
• Outlet Ø [mm]: 7.9
• Fuel Type: Petrol
• Inlet Ø [mm]: 7.9
• Weight [kg]: 0.174
• Filter type: In-Line Filter
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Driven Units: Water Pump
• Tensile Cord Material: Fiberglass
• Belt Material: HNBR (hydrogenated nitrile butadiene rubber)
• Colour: black
• Number of Teeth: 87
• Width [mm]: 10
• Tooth Pitch [mm]: 5
• Length [mm]: 435
• Name: Hammasrihm
• Manufacturer: GAT

• Fitting Position: Rear Axle
• for PR number: 1KU, 1KZ, 2EM
• Width 1 [mm]: 123
• Height 1 [mm]: 61.2
• Width 2 [mm]: 123
• Height 2 [mm]: 56.2
• Thickness [mm]: 16.4
• Brake System: ATE
• Test Mark: ECE R90
• Manufacturer: ABAKUS DEPO/LORO

Wear Warning Contact: not prepared for wear warning indicator, excl. wear warning contact General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Fitting Position: Rear Axle
• Length [mm]: 123
• Height [mm]: 61.2
• Height 1 [mm]: 56.2
• Thickness [mm]: 16
• WVA Number: 25009, 25011
• Manufacturer: ASHIKA-KLOCKI

• for PR number: 1KU, 1ZK, 2EM
• Installatsiooni pool: Tagasild
• Jämedus/Tugevus (mm): 16,4
• Pidurisüsteem: ATE
• Laius 1 (mm): 123
• Laius 2 (mm): 123
• Kõrgus 1 (mm): 61,2
• Kõrgus 2 (mm): 56,2
• Manufacturer: DENCKERMANN ZAWIESZENIE

Kulumishoiatus kontakt: mitte kulumishoiatusnäidiku jaoks ettevalmistatud, ilma kulumihoiatuseta

• Rim Size [inch]: 16.0
• Fitting Position: Rear Axle
• Brake System: CONTINENTAL
• Width [mm]: 123
• Height [mm]: 56.2
• Thickness [mm]: 15.9
• Width 2 [mm]: 123
• Height 2 [mm]: 61.2
• Thickness 2 [mm]: 15.9
• WVA Number: 25009
• Wear Warning Contact: excl. wear warning contact
• Supplementary Article/Info 2: with anti-squeak plate
• Test Mark: ECE-R90
• Weight [kg]: 1.09
• Manufacturer: VALEO
• Name: VA 302444

• for PR number: 1KU
• Fitting Position: Rear Axle
• Thickness 1 [mm]: 16.4
• Supplementary Article/Supplementary Info: without accessories
• Number of pads: 4
• Wear Warning Contact: not prepared for wear warning indicator
• Test Mark: ECE R90 APPROVED
• Supplementary Article/Info 2: with mounting manual
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• for PR number: 1KU, 2EM, 1KZ, 2ER, 2EI
• Fitting Position: Rear Axle
• Height 1 [mm]: 61.2
• Height 2 [mm]: 56.2
• Thickness [mm]: 16.4
• Wear Warning Contact: excl. wear warning contact
• Brake System: Teves
• Article number of recommended accessories: 27-0553
• Width [mm]: 123
• Name: Piduriklotsi komplekt,ketaspidur
• Manufacturer: MAX

• Installatsiooni pool: Tagasild
• Üldine informatsioon: brake pads; rear; without wire
• Manufacturer: VIKA

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Kontrolltähistus: E9 90R-02A0118/3530
• Kulumishoiatus kontakt: mitte kulumishoiatusnäidiku jaoks ettevalmistatud
• Tootja piirang: ATE
• Laius (mm): 123
• Kõrgus 1 (mm): 56
• Kõrgus 2 (mm): 61
• Jämedus/Tugevus (mm): 16,2
• Quality class: PJ
• Name: Brake pads

• Fitting Position: Front Axle
• Wear Warning Contact: incl. wear warning contact
• Brake System: Lucas - TRW
• Width [mm]: 175
• Height [mm]: 70
• Thickness [mm]: 20
• Number of wear indicators [per axle]: 1
• Warning Contact Length [mm]: 260
• Manufacturer: KAMOKA UK£ADY HAMULCOWE

• Fitting Position: Rear Axle
• for PR number: 1KU, 2EM, 1KZ, 2ER
• Width [mm]: 123
• Height 1 [mm]: 61.2
• Height 2 [mm]: 56.2
• Thickness [mm]: 16.4
• Wear Warning Contact: excl. wear warning contact
• Brake System: Teves
• Name: Piduriklotsi komplekt,ketaspidur
• Manufacturer: QUARO
• Lisainfo: QP6346
• Additional information: QP6346

• for PR number: 1KU, 1KZ, 2EI, 2EM, 2ER
• Quantity per packing unit: 4
• Installatsiooni pool: Tagasild
• Jämedus/Tugevus (mm): 16,2
• Laius (mm): 123
• Kõrgus 1 (mm): 56,2
• Kõrgus 2 (mm): 61,2
• Pidurisüsteem: ATE
• Kaal (kg): 1,25
• Manufacturer: TOMEX BRAKES

• Driven Units: Camshaft
• Article number of the recommended special tool: GAT5145A
• Tensile Cord Material: Fiberglass
• Belt Material: HNBR (hydrogenated nitrile butadiene rubber)
• Colour: black
• Number of Teeth: 163
• Width [mm]: 20
• Tooth Pitch [mm]: 7
• Length [mm]: 1,141
• Name: Hammasrihm
• Manufacturer: GAT

• Fitting Position: Rear Axle
• Brake System: ATE
• WVA Number: 25009
• Length 1 [mm]: 123
• Height 1 [mm]: 61.2
• Height 2 [mm]: 56.2
• Thickness 1 [mm]: 16
• Manufacturer: MAGNETI MARELLI

• Fitting Position: Rear Axle
• for PR number: 1KU, 2EM, 2EI, 1KZ, 2ER, 2EV
• Quantity per packing unit: 4
• Manufacturer Restriction: ATE
• Width [mm]: 123
• Height 1 [mm]: 56.2
• Height 2 [mm]: 61.2
• Thickness [mm]: 16.2
• Wear Warning Contact: not prepared for wear warning indicator
• Test Mark: E9 90R-02A0118/3530
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: TRW
• Quality class: Q

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Thickness [mm]: 20
• Width [mm]: 175
• Height [mm]: 70
• Brake System: Lucas / TRW
• Supplementary Article/Info 2: with brake caliper screws
• Manufacturer: KAMOKA

Wear Warning Contact: not prepared for wear warning indicator, without integrated wear warning contact

• for PR number: 1KU, 2EM
• Fitting Position: Rear Axle
• Width [mm]: 123
• Height 1 [mm]: 61.2
• Height 2 [mm]: 56.2
• Thickness [mm]: 16.5
• Wear Warning Contact: prepared for wear warning indicator
• Brake System: ATE
• Supplementary Article/Info 2: with anti-squeak plate
• Name: Piduriklotsi komplekt,ketaspidur
• Manufacturer: MEY

• for PR number: 1LB, 1LX
• Installatsiooni pool: Esisild
• Laius (mm): 175
• Jämedus/Tugevus (mm): 20
• Kõrgus (mm): 70
• Pidurisüsteem: Lucas / TRW
• Manufacturer: DENCKERMANN ZAWIESZENIE

Kulumishoiatus kontakt: mitte kulumishoiatusnäidiku jaoks ettevalmistatud, ilma integreeritud kulumiskontaktita

• Number of Teeth: 163
• Width [mm]: 20
• General Information: Timing belt
• Manufacturer: BORSEHUNG

• Model Year from: 2018
• Weight [kg]: 0.373
• Inner Diameter [mm]: 8
• Outer Diameter [mm]: 60
• Packaging length [cm]: 7.1
• Packaging width [cm]: 7.1
• Packaging height [cm]: 4.9
• Manufacturer: FEBEST

• Fitting Position: Rear Axle
• for PR number: 1KU, 1KZ
• Quantity per packing unit: 4
• Width [mm]: 123
• Thickness [mm]: 16
• Height 1 [mm]: 56
• Height 2 [mm]: 61
• Wear Warning Contact: excl. wear warning contact
• Supplementary Article/Supplementary Info: without accessories
• Brake System: Teves
• WVA Number: 25011, 25009
• Name: BR P 85 124
• Manufacturer: BREMBO

• Construction Year from: 07.2021
• Fitting Position: Front Axle
• for PR number: 1LB, 1LX
• Quantity per packing unit: 4
• Thickness [mm]: 20
• Width [mm]: 175.2
• Height [mm]: 69.5
• Brake System: TRW
• Manufacturer: LPR

• Installatsiooni pool: Esisild
• Üldine informatsioon: brake pads; front
• Manufacturer: VIKA

• Fitting Position: Front Axle
• for PR number: 1LA, 1LW
• Kulumishoiatus kontakt: koos kulumianduriga
• Piduriseade: mitte süsinik-keraamilistele piduriketastele
• Tootja piirang: TRW
• Jämedus/Tugevus (mm): 20
• Pikkus (mm): 175,2
• Kõrgus (mm): 69,7
• Kulumisnäidikute arv [ühe telje kohta]: 1
• Hoiatuskontakti pikkus (mm): 260
• Manufacturer: JPN

• for PR number: 1LA, 1LW
• Fitting Position: Front Axle
• Height [mm]: 69.5
• Thickness [mm]: 20
• Wear Warning Contact: with integrated wear sensor
• Number of wear indicators [per axle]: 1
• directional:
• Brake System: TRW
• Width [mm]: 175
• Name: Piduriklotsi komplekt,ketaspidur
• Manufacturer: MAX

• Fitting Position: Rear Axle
• for PR number: 1KU, 1KZ, 2EI, 2EM, 2ER
• Quantity per packing unit: 4
• Width [mm]: 123.2
• Height 1 [mm]: 61.2
• Height 2 [mm]: 56.2
• Thickness [mm]: 16.4
• Wear Warning Contact: not prepared for wear warning indicator
• WVA Number: 25009
• Brake System: Teves
• Weight [kg]: 1.05
• Assy./disassy. by qualified personnel required!:
• Name: HE 8DB355020261
• Manufacturer: HELLA PAGID

• Fitting Position: Front Axle
• Brake System: Trw
• Quantity per packing unit: 4
• Test Mark: ECE-R90
• Height 1 [mm]: 64.5
• Wear Warning Contact: prepared for wear warning indicator
• Vibration: with vibration damper
• Width 1 [mm]: 160
• Thickness 1 [mm]: 20
• Manufacturer: METELLI UKL.HAMULCOWY

• Brake System: Trw
• Fitting Position: Front Axle
• Quantity per packing unit: 4
• Test Mark: ECE-R90
• Height 1 [mm]: 64.5
• Wear Warning Contact: incl. wear warning contact
• Vibration: with vibration damper
• Width 1 [mm]: 160
• Thickness 1 [mm]: 20
• Manufacturer: METELLI UKL.HAMULCOWY

• Fitting Position: Front Axle
• Brake System: TRW
• Width [mm]: 176
• Height [mm]: 70
• Thickness [mm]: 20
• WVA Number: 25217
• Number of wear indicators [per axle]: 1
• Operating Mode: Electric
• Supplementary Article/Info 2: with anti-squeak plate
• Vibration: with vibration damper
• Test Mark: ECE-R90
• Weight [kg]: 2.57
• Manufacturer: VALEO
• Name: VA 302416

Wear Warning Contact: with acoustic wear warning, incl. wear warning contact

• for PR number: 1KU, 2EM
• Fitting Position: Rear Axle
• Width [mm]: 123
• Height 1 [mm]: 61.2
• Height 2 [mm]: 56.2
• Thickness [mm]: 16.5
• Wear Warning Contact: prepared for wear warning indicator
• Brake System: ATE
• Supplementary Article/Info 2: with anti-squeak plate
• Quality: PREMIUM
• Name: Piduriklotsi komplekt,ketaspidur
• Manufacturer: MEY

General Information: MEYLE-PD brake pads have a very short brake-in time, to ensure safe initial braking and high performance from the start. MEYLE-PD brake pads have a brake-in coating on the pad or are treated with scorching technology.

• for brake disc diameter [mm]: 314
• for PR number: 1LX
• Length [mm]: 175.3
• Width [mm]: 70.3
• Test Mark: ECE R90 Approved
• Fitting Position: Front Axle
• Thickness 1 [mm]: 20
• Weight [kg]: 2.819
• Supplementary Article/Info 2: with bolts/screws
• Observe service information:
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year to: 07.2019
• Rim Size [inch]: 16.0
• Fitting Position: Rear Axle
• Brake System: TEVES
• Width [mm]: 123
• Height [mm]: 56.3
• Thickness [mm]: 15.5
• Width 2 [mm]: 123
• Height 2 [mm]: 61.3
• Thickness 2 [mm]: 15.5
• WVA Number: 25009, 25011
• Supplementary Article/Info 2: with anti-squeak plate
• Test Mark: ECE-R90
• Weight [kg]: 1.12
• Manufacturer: VALEO

• for PR number: 1LB, 1LX
• Quantity per packing unit: 4
• Installatsiooni pool: Esisild
• Tootja piirang: TRW
• Jämedus/Tugevus (mm): 20
• Laius (mm): 175,2
• Kõrgus (mm): 69,7
• Piirangutega toode/piirangu info 2: koos pidurisadula kruvidega
• Kaal (kg): 2,9
• Manufacturer: TOMEX BRAKES

• Fitting Position: Rear Axle
• for PR number: 1KU, 2EM, 1KZ, 2ER
• Width [mm]: 123
• Height 1 [mm]: 61.2
• Height 2 [mm]: 56.2
• Thickness [mm]: 16.4
• Wear Warning Contact: excl. wear warning contact
• Brake System: Teves
• Friction Lining Material: Ceramic
• Name: Piduriklotsi komplekt,ketaspidur
• Manufacturer: QUARO

• Fitting Position: Rear Axle
• for brake disc diameter [mm]: 300
• for PR number: 1KU, 2EI, 2EM
• paired article number: 563168JC, 563168JC-1
• Quantity per packing unit: 4
• Jämedus/Tugevus (mm): 16,6
• Kontrolltähistus: R90 Homologated
• Laius (mm): 123
• Kõrgus (mm): 57
• Kaal (kg): 1,128
• Kõrgus 1 (mm): 57
• Kulumishoiatus kontakt: mitte kulumishoiatusnäidiku jaoks ettevalmistatud
• Pidurisüsteem: ATE
• Konteineri tüüp: Sahtel
• WVA-number: 25011
• pakendi pikkus [cm]: 16,8
• pakendi laius [cm]: 12,7
• pakendi kõrgus [cm]: 4,7
• Manufacturer: JURID

• for brake disc diameter [mm]: 314
• for PR number: 1LX
• Length [mm]: 175
• Width [mm]: 70
• Test Mark: ECE R90 Approved
• Fitting Position: Front Axle
• Thickness 1 [mm]: 20
• Weight [kg]: 2.819
• Supplementary Article/Info 2: with bolts/screws
• Observe service information:
• Manufacturer: BLUE PRINT HAMULCE

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for brake disc diameter [mm]: 314
• for PR number: 1LW
• Length [mm]: 175
• Width [mm]: 69
• Test Mark: ECE R90 Approved
• Fitting Position: Front Axle
• Thickness 1 [mm]: 20
• Wear Warning Contact: incl. wear warning contact
• Weight [kg]: 2.76
• Supplementary Article/Info 2: with bolts/screws
• Observe service information:
• Manufacturer: FEBI HAMULCE

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for brake disc diameter [mm]: 314
• for PR number: 1LX
• Length [mm]: 175.3
• Width [mm]: 70.3
• Test Mark: ECE R90 Approved
• Fitting Position: Front Axle
• Thickness 1 [mm]: 20
• Weight [kg]: 2.819
• Supplementary Article/Info 2: with bolts/screws
• Name: SW 33 10 0088
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Brake System: TRW
• Width [mm]: 176
• Height [mm]: 69.7
• Thickness [mm]: 20
• WVA Number: 24738
• Number of wear indicators [per axle]: 1
• Operating Mode: Electric
• Supplementary Article/Info 2: with anti-squeak plate
• Vibration: with vibration damper
• Test Mark: ECE-R90
• Weight [kg]: 2.63
• Manufacturer: VALEO

Wear Warning Contact: with acoustic wear warning, incl. wear warning contact

• Fitting Position: Rear Axle
• for PR number: 1KU, 1KZ, 2EI, 2EM, 2ER
• Width [mm]: 123.2
• Height 1 [mm]: 61.2
• Height 2 [mm]: 56.2
• Thickness [mm]: 16.4
• Wear Warning Contact: not prepared for wear warning indicator
• WVA Number: 25009
• Brake System: Teves
• Article number of recommended accessories: 82503500
• Packaging length [cm]: 12.5
• Packaging width [cm]: 8.1
• Packaging height [cm]: 8
• Weight [kg]: 1.05
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: TEX
• Quality class: PJ

• Outer Diameter 1 [mm]: 70
• Width 1 [mm]: 21
• Manufacturer: SNR /NTN-SNR/

• Width of castor bearing surface [mm]: 20.5
• Width [mm]: 21
• Inner Diameter [mm]: 8
• Outer Diameter [mm]: 70.6, 60
• Weight [kg]: 0.38
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• for brake disc diameter [mm]: 340
• for PR number: 1LA, 1LW
• Quantity per packing unit: 4
• Number of pads: 4
• Thickness [mm]: 20
• Length [mm]: 175.3
• Height [mm]: 69.8
• Wear Warning Contact: incl. wear warning contact
• Supplementary Article/Supplementary Info: with accessories
• Brake Pad: With bevelled edges
• Brake System: TRW
• WVA Number: 24738, 25217
• Name: SK VKBP80176E
• Manufacturer: SKF

• Fitting Position: Left
• Diameter [mm]: 60
• Width [mm]: 21
• Tensioner Pulley Actuation: Automatic
• Name: PINGUTUSRULL,HAMMASRIHM
• Manufacturer: SKF

• Driven Units: Camshaft
• Outer Diameter [mm]: 60
• Width [mm]: 25
• Manufacturer: GATES

• Fitting Position: Rear Axle
• for PR number: 1KU, 1KZ, 2EM
• Width 1 [mm]: 123
• Height 1 [mm]: 61.2
• Width 2 [mm]: 123
• Height 2 [mm]: 56.2
• Thickness [mm]: 16.4
• Brake System: ATE
• Test Mark: E1 90R-02A0215/0113
• MAPP code available:
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: ATE
• Lisainfo: 13.0460-7294.2
• Additional information: 13.0460-7294.2

Wear Warning Contact: not prepared for wear warning indicator, excl. wear warning contact

• Fitting Position: Front Axle
• for PR number: 1LB, 1LX
• Width [mm]: 175
• Height [mm]: 69.5
• Thickness [mm]: 20
• Wear Warning Contact: not prepared for wear warning indicator
• directional:
• Supplementary Article/Info 2: with brake caliper screws
• WVA Number: 24738
• Brake System: TRW
• Technical Information Number: 24738 200 8 5
• Name: Piduriklotsi komplekt,ketaspidur
• Manufacturer: QUARO

• Fitting Position: Front Axle
• for PR number: 1LW, 1LA
• Quantity per packing unit: 4
• Manufacturer Restriction: TRW
• Width [mm]: 175.2
• Height [mm]: 69.7
• Thickness [mm]: 20
• Wear Warning Contact: incl. wear warning contact
• Supplementary Article/Supplementary Info: with accessories
• Supplementary Article/Info 2: with brake caliper screws
• Test Mark: E9 90R-01107/3181
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: TRW
• Lisainfo: GDB2114
• Additional information: GDB2114

SVHC: No information available, please contact the manufacturer!

• Belt Width [mm]: 20.1
• Belt Material: PTFE (polytetrafluoroethylene)
• Colour: black
• Number of Teeth: 163
• Belts: with rounded tooth profile
• Name: HAMMASRIHMA KOMPLEKT
• Manufacturer: SKF

• Fitting Position: Rear Axle
• for PR number: 1KU, 1KZ
• Quantity per packing unit: 4
• Width [mm]: 123
• Thickness [mm]: 16
• Height 1 [mm]: 56
• Height 2 [mm]: 61
• Wear Warning Contact: excl. wear warning contact
• Supplementary Article/Supplementary Info: without accessories
• Brake System: Teves
• WVA Number: 25009, 25011
• Name: BR P 85 124X
• Manufacturer: BREMBO

General Information: Brembo Xtra: the perfect brake pad for Brembo Xtra and Brembo Max brake discs.

• Number of belts: 1
• Number of track rollers: 2
• Width 1 [mm]: 20
• Number of Teeth 1: 163
• Manufacturer: SNR
• Name: SN KD457.75

• Fitting Position: Front Axle
• for PR number: 1LA, 1LW
• Width [mm]: 175
• Height [mm]: 69.5
• Thickness [mm]: 20
• Wear Warning Contact: with integrated wear sensor
• Number of wear indicators [per axle]: 1
• directional:
• Brake System: TRW
• Friction Lining Material: Ceramic
• Name: Piduriklotsi komplekt,ketaspidur
• Manufacturer: QUARO

• Fitting Position: Front Axle
• for PR number: 1LW, 1LA
• Quantity per packing unit: 4
• Width [mm]: 175
• Thickness [mm]: 20
• Height [mm]: 70
• Wear Warning Contact: incl. wear warning contact
• Supplementary Article/Supplementary Info: without accessories
• Brake System: TRW
• Warning Contact Length [mm]: 200
• Supplementary Article/Info 2: with brake caliper screws
• directional:
• Number of wear indicators [per axle]: 1
• WVA Number: 24738, 25217
• Name: BR P 85 144
• Manufacturer: BREMBO

• Width [mm]: 20
• Number of Teeth: 163
• Belts: with rounded tooth profile
• Weight [kg]: 0.67
• Observe service information:
• Name: HAMMASRIHMA KOMPLEKT
• Manufacturer: FEB
• Additional information: FE47890
• Lisainfo: FE47890

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• for PR number: 1KU, 1KZ, 2EM
• Width 1 [mm]: 123
• Height 1 [mm]: 61.2
• Width 2 [mm]: 123
• Height 2 [mm]: 56.2
• Thickness [mm]: 16.4
• Brake System: ATE
• Test Mark: E1 90R-02A0258/0091
• MAPP code available:
• Permissible up to vehicle capacity [kW]: 225
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: ATE
• Quality class: Q

Wear Warning Contact: not prepared for wear warning indicator, excl. wear warning contact Technical Information: Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones.

• Fitting Position: Front Axle
• for PR number: 1LB
• Quantity per packing unit: 4
• Manufacturer Restriction: TRW
• Width [mm]: 175.2
• Height [mm]: 69.7
• Thickness [mm]: 20
• Wear Warning Contact: with acoustic wear warning
• Test Mark: E9 90R-01107/3181
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: TRW
• Quality class: Q

SVHC: No information available, please contact the manufacturer!

• for brake disc diameter [mm]: 340
• for PR number: 1LB, 1LX
• Fitting Position: Front Axle
• Width [mm]: 175
• Height [mm]: 69.5
• Thickness [mm]: 20.2
• Wear Warning Contact: with acoustic wear warning
• Supplementary Article/Info 2: with anti-squeak plate
• Quality: PREMIUM
• Name: Piduriklotsi komplekt,ketaspidur
• Manufacturer: MEY

General Information: Different chamfers on the leading and trailing edges of the brake pads support the silent performance of MEYLE-PD. To ensure this silent performance, slotting and chamfer are individually designed for each brake pad.

• Fitting Position: Front Axle
• for PR number: 1LA, 1LW
• Width [mm]: 175.2
• Height [mm]: 69.5
• Thickness [mm]: 20
• Wear Warning Contact: with integrated wear warning contact
• Number of wear indicators [per axle]: 1
• Supplementary Article/Info 2: with brake caliper screws
• directional:
• WVA Number: 24738
• Brake System: TRW
• Observe mounting information:
• Packaging length [cm]: 20.9
• Packaging width [cm]: 13.4
• Packaging height [cm]: 8.8
• Weight [kg]: 2.81
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: TEX
• Lisainfo: 24738-20,0 9 5
• Additional information: 24738-20,0 9 5

• Fitting Position: Front Axle
• for brake disc diameter [mm]: 314
• for PR number: 1LW
• Quantity per packing unit: 4
• Jämedus/Tugevus (mm): 19,9
• Kontrolltähistus: R90 Homologated
• Laius (mm): 175,2
• Kõrgus (mm): 69,6
• Kõrgus 1 (mm): 69,6
• Kulumishoiatus kontakt: koos kulumianduriga
• Pidurisüsteem: TRW
• Konteineri tüüp: Sahtel
• WVA-number: 24738, 25217
• pakendi pikkus [cm]: 20,6
• pakendi laius [cm]: 12,2
• pakendi kõrgus [cm]: 7,8
• Keermestatud varraste arv: 4
• suunatud:
• Klambrite arv: 4
• Manufacturer: JURID

• Fitting Position: Front Axle
• for PR number: 1LB, 1LX
• Quantity per packing unit: 4
• Width [mm]: 175
• Thickness [mm]: 20
• Height [mm]: 70
• Wear Warning Contact: with acoustic wear warning
• Supplementary Article/Supplementary Info: without accessories
• Brake System: TRW
• Supplementary Article/Info 2: with brake caliper screws
• directional:
• WVA Number: 24738
• Manufacturer: BREMBO
• Name: BR P 85 166

• Driven Units: Water Pump
• Supplementary Article/Supplementary Info: with water pump
• Observe technical data:
• Name: Veepump hammasrihmakomplekt
• Manufacturer: GAT

• Fitting Position: Front Axle
• for PR number: 1LB, 1LX
• Width [mm]: 175.2
• Height [mm]: 69.5
• Thickness [mm]: 20
• Wear Warning Contact: not prepared for wear warning indicator
• Supplementary Article/Info 2: with brake caliper screws
• WVA Number: 24738
• Brake System: TRW
• Weight [kg]: 2.8
• Assy./disassy. by qualified personnel required!:
• Name: HE 8DB355031751
• Manufacturer: HELLA PAGID

• Fitting Position: Front Axle
• for PR number: 1LB, 1LX
• Width [mm]: 175.2
• Height [mm]: 69.5
• Thickness [mm]: 20
• Wear Warning Contact: not prepared for wear warning indicator
• Supplementary Article/Info 2: with brake caliper screws
• directional:
• WVA Number: 24738
• Brake System: TRW
• Observe mounting information:
• Packaging length [cm]: 17
• Packaging width [cm]: 12
• Packaging height [cm]: 8.3
• Weight [kg]: 2.8
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: TEX