• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: JP GROUP
• Lisainfo: Protective Cap/Bellow, shock absorber
• Additional information: Protective Cap/Bellow, shock absorber

• Fitting Position: Rear Axle
• General Information: protective pipe; rear
• Manufacturer: VIKA

• Fitting Position: Rear Axle
• Weight [kg]: 0.05
• Length [mm]: 178
• Required quantity: 2
• Inner Diameter [mm]: 36, 53
• General Information: protective pipe; rear
• Manufacturer: VIKA

• Fitting Position: Rear Axle Left, Rear Axle Right
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Suspension: for vehicles with electronic suspension control
• for PR number: 1JP
• Width [mm]: 59
• Thickness [mm]: 180
• Material: PP (Polypropylene)
• Fitting Position: Rear Axle
• Weight [kg]: 0.032
• Manufacturer: FEB
• Additional information: F22142
• Lisainfo: F22142

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Kaitsekaan/kaitsekumm - Vedrustus/amordid VW T. PASSAT 05-/TIGUAN/TOURAN/SUPERB 08-

• Suspension: for vehicles without electronic suspension control
• not for PR number: 1JP
• Length [mm]: 178
• Inner Diameter [mm]: 36, 53
• Fitting Position: Rear Axle
• Shape: round
• Weight [kg]: 0.05
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Kaitsekaan/kaitsekumm - Vedrustus/amordid VW T. A3 03- LE/PR

• Suspension: for vehicles with electronic suspension control
• for PR number: 1JP
• Width [mm]: 59
• Thickness [mm]: 180
• Material: PP (Polypropylene)
• Fitting Position: Rear Axle
• Weight [kg]: 0.032
• Name: SW 30 92 2142
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Suspension: for vehicles without electronic suspension control
• not for PR number: 1JP
• Length [mm]: 178
• Inner Diameter [mm]: 36, 53
• Fitting Position: Rear Axle
• Shape: round
• Weight [kg]: 0.05
• Name: SW 30 93 8657
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Production date from: 09/10
• Mounting Type: Rubber Mount
• Fitting Position: Front Axle
• Height [mm]: 206
• for OE number: 6N0413175A
• Manufacturer: SASIC

• Fitting Position: Front Axle
• Weight [kg]: 0.07
• Material: Thermoplast
• Required quantity: 2
• Outer Diameter [mm]: 68, 80
• General Information: protective pipe; front
• Manufacturer: VIKA

• Suspension: for vehicles without electronic suspension control
• not for PR number: 1JP
• Thickness [mm]: 240
• Inner Diameter [mm]: 64
• Material: PE (Polyethylene)
• Fitting Position: Rear Axle
• Weight [kg]: 0.04
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Weight [kg]: 0.07
• Required quantity: 2
• Inner Diameter 1 [mm]: 63
• Inner Diameter 2 [mm]: 72
• Height [mm]: 198
• Fitting Position: Front Axle
• Manufacturer: TEDGUM

• Outer Diameter [mm]: 68, 80
• Material: Thermoplast
• Fitting Position: Front Axle
• Weight [kg]: 0.07
• Name: Kaitsemts/kaitsekumm,amort
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Model Year from: 2011
• Fitting Position: Front Axle
• Weight [kg]: 0.108
• Packaging length [cm]: 19
• Packaging width [cm]: 7.8
• Packaging height [cm]: 7.8
• Height [mm]: 200
• Manufacturer: FEBEST

• Outer Diameter [mm]: 68, 80
• Material: Thermoplast
• Fitting Position: Front Axle
• Weight [kg]: 0.07
• Name: SW 30 93 6006
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for PR number: 1JA
• Model Year from: 2011
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Bottom eye
• Weight [kg]: 0.144
• Packaging length [cm]: 4.2
• Packaging width [cm]: 4.2
• Packaging height [cm]: 3.7
• Manufacturer: FEBEST

• Fitting Position: Front Axle
• Material: Thermoplast
• Manufacturer: FAST

• not for OE number: 1T0513029H, 1T0513029L
• Fitting Position: Rear Axle, Rear Axle Right, Rear Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Article number of recommended accessories: GH-694706
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Name: GH 339953
• Manufacturer: AUTO-GH

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles with bad road version, for vehicles without electronic suspension control

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Shock Absorber System: Twin-Tube
• Manufacturer: KAMOKA AMORTYZATORY

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Manufacturer: KAVO

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Shock Absorber System: Twin-Tube
• Manufacturer: KAMOKA AMORTYZATORY

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Shock Absorber System: Twin-Tube
• Manufacturer: KAMOKA AMORTYZATORY
• Additional information: 2000377 KAMOKA
• Lisainfo: 2000377 KAMOKA

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Absorber does not carry a spring
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Vehicle Equipment: for vehicles without level control
• Shock Absorber System: Twin-Tube
• Name: AMORT
• Manufacturer: MAX
• Lisainfo: MGA-5856
• Additional information: MGA-5856

• Fitting Position: Front Axle, Front Axle Right, Front Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Suspension Strut Outer Diameter [mm]: 55
• Manufacturer: AUTO-GH

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles with bad road version, for vehicles without electronic suspension control

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Bottom Clamp, Top pin
• Manufacturer: DRIVE

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles with bad road version, for vehicles without electronic suspension control

• not for OE number: 1T0513029H, 1T0513029L
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Length [mm]: 338
• Manufacturer: DRIVE

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles with bad road version, for vehicles without electronic suspension control

• not for vehicle configuration line / variant: Cross
• Vehicle type: G07
• not for PR number: 1JL
• Shock Absorber Type: Gas Pressure
• Fitting Position: Front Axle
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Bottom Plate, Top pin
• Suspension Strut Outer Diameter [mm]: 55
• Shock Absorber System: Twin-Tube
• Name: Gas shock absorber
• Quality class: PJ

Suspension: for vehicles without electronic suspension control, for vehicles without bad road version, for vehicles with sports suspension, for vehicles with standard suspension Lisainfo: "Tootja: SRL
VW TOURAN 03-
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
VW TOURAN 03-
(kvaliteediklass: PJ)"

• not for OE number: 1T0513029H, 1T0513029L
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber Design: Telescopic Shock Absorber
• Length [mm]: 338
• Name: AMORT
• Manufacturer: KYB
• Additional information: 344459
• Lisainfo: 344459

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles with bad road version, for vehicles without electronic suspension control General Information: Please refer to the technical drawing in "Documents"

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin
• Diameter [mm]: 25, 54
• Manufacturer: KAVO

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Weight [kg]: 4
• Bore Diameter [mm]: 32
• Observe technical data:
• Length 1 [mm]: 391
• Length 2 [mm]: 553
• Piston Rod Diameter [mm]: 22
• Article number of recommended accessories: MK194, PK163
• Packaging length [cm]: 51.5
• Packaging width [cm]: 16.2
• Packaging height [cm]: 16.2
• Housing diameter in clamping area [mm]: 55
• Manufacturer: MONROE

Guarantee: 5 years guarantee with accessories when replaced in pairs

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Shock Absorber System: Twin-Tube
• Suspension Strut Outer Diameter [mm]: 55
• Piston Rod Diameter [mm]: 25
• Name: AMORT
• Manufacturer: KYB
• Additional information: KYB335808
• Lisainfo: KYB335808

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles with bad road version, for vehicles without electronic suspension control Technical Information: Please refer to the technical drawing in "Documents"

• Vehicle type: G07
• not for vehicle configuration line / variant: Cross
• not for PR number: 1JL
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Absorber does not carry a spring
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Shock Absorber System: Twin-Tube
• Manufacturer: BILSTEIN
• Name: BI 19-139333

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles without electronic suspension control, for vehicles without bad road version Additional information: "Tootja: BILSTEIN
VW TOURAN
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
VW TOURAN
(kvaliteediklass: Q)"

• Fitting Position: Front Axle
• Housing Diameter [mm]: 55
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Shock Absorber System: Twin-Tube
• General Information: gas-filled shock absorber; front
• Manufacturer: BORSEHUNG

• Vehicle type: G07
• not for vehicle configuration line / variant: Cross
• not for PR number: 1JL
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Bottom Plate, Top pin
• Housing diameter in clamping area [mm]: 55
• Shock Absorber System: Twin-Tube
• Manufacturer: BILSTEIN
• Name: BI 22-139320

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles without electronic suspension control, for vehicles without bad road version Additional information: "Tootja: BILSTEIN
VW TOURAN 03-
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
VW TOURAN 03-
(kvaliteediklass: Q)"

• not for OE number: 1T0513029H, 1T0513029L
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber Design: Telescopic Shock Absorber
• Name: AMORT
• Manufacturer: KYB

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles with bad road version, for vehicles without electronic suspension control

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Shock Absorber System: Twin-Tube
• Suspension Strut Outer Diameter [mm]: 55
• Piston Rod Diameter [mm]: 25
• Manufacturer: KYB

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles with bad road version, for vehicles without electronic suspension control Technical Information: Please refer to the technical drawing in "Documents"

• Fitting Position: Front Axle Left, Front Axle Right
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Shock Absorber System: Electronically adjustable shock strength
• Braking/Driving Dynamics: for vehicles with DCC suspension
• Manufacturer: NTY

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Absorber does not carry a spring
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Shock Absorber System: Monotube
• Name: BI 24-178006
• Manufacturer: BILSTEIN
• Quality class: Q

Suspension: for vehicles with sports suspension, for vehicles without electronic suspension control Additional information: "Tootja: BILSTEIN
AUDI/SEAT/VW
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
AUDI/SEAT/VW
(kvaliteediklass: Q)"

• not for vehicle configuration line / variant: Cross
• not for PR number: 1JL
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Absorber does not carry a spring
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Length [mm]: 632
• Length 1 [mm]: 371
• Length 2 [mm]: 584
• Shock Absorber System: Monotube
• Manufacturer: BILSTEIN

Suspension: for vehicles with standard suspension, for vehicles without electronic suspension control, for vehicles without bad road version Additional information: "Tootja: BILSTEIN
VW/SKODA/SEAT
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
VW/SKODA/SEAT
(kvaliteediklass: Q)"

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Housing diameter in clamping area [mm]: 55
• Shock Absorber System: Single Tube Upside Down
• Manufacturer: BILSTEIN

Suspension: for vehicles with sports suspension, for vehicles without electronic suspension control Additional information: "Tootja: BILSTEIN
AUDI A3/GOLF V ' 03-
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
AUDI A3/GOLF V ' 03-
(kvaliteediklass: Q)"

• Fitting Position: Rear Axle Right
• Suspension: for vehicles with electronic suspension control
• for PR number: 1JP
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Electronically adjustable shock strength
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Weight [kg]: 1.4
• Operating Mode: Electronic
• Guarantee: 5 years guarantee
• paired article number: C1517L
• Packaging length [cm]: 69.6
• Packaging width [cm]: 13.3
• Packaging height [cm]: 13.6
• Name: Amort
• Manufacturer: MON

• Fitting Position: Rear Axle Left
• Suspension: for vehicles with electronic suspension control
• for PR number: 1JP
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Electronically adjustable shock strength
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Weight [kg]: 1.4
• Operating Mode: Electronic
• Guarantee: 5 years guarantee
• paired article number: C1514R
• Packaging length [cm]: 69.6
• Packaging width [cm]: 13.3
• Packaging height [cm]: 13.6
• Name: Amort
• Manufacturer: MON

• not for vehicle configuration line / variant: Cross
• not for PR number: 1JL
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Housing diameter in clamping area [mm]: 55
• Shock Absorber System: Single Tube Upside Down
• Name: AMORT
• Manufacturer: BIL
• Quality class: Q

Suspension: for vehicles with standard suspension, for vehicles without electronic suspension control, for vehicles without bad road version Additional information: "Tootja: BILSTEIN
AUDI A3/GOLF V ' 03-
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
AUDI A3/GOLF V ' 03-
(kvaliteediklass: Q)"

• Fitting Position: Front Axle
• Suspension: for vehicles with electronic suspension control
• for PR number: G01
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Electronically adjustable shock strength
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Weight [kg]: 2.5
• Operating Mode: Electronic
• Guarantee: 5 years guarantee
• Packaging length [cm]: 59.1
• Packaging width [cm]: 20.7
• Packaging height [cm]: 21.2
• Name: Amort
• Manufacturer: MON