• Fitting Position: Front Axle
• Inner Diameter [mm]: 35
• Width [mm]: 37
• Outer Diameter [mm]: 66
• Lisainfo: VW GOLF II, JETTA
• Additional information: VW GOLF II, JETTA

• Fitting Position: Rear Axle
• Number of Teeth, ABS ring: 43
• Inner Diameter [mm]: 61
• Outer Diameter [mm]: 79.5
• Supplementary Article/Info 2: for wheel bearing/wheel hub
• Width [mm]: 21
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Supplementary Article/Info 2: for wheel bearing/wheel hub
• Fitting Position: Rear Axle Left, Rear Axle Right
• Manufacturer: METZGER

• Fitting Position: Rear Axle
• Vehicle Identification Number (VIN) to: 6N-XY379991
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Inner Diameter 1 [mm]: 17.5
• Outer Diameter 1 [mm]: 39.9
• Width 1 [mm]: 14.6
• Inner Diameter 2 [mm]: 29
• Outer Diameter 2 [mm]: 50.3
• Width 2 [mm]: 14.7
• SVHC: No SVHC present!
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: FAG

• Fitting Position: Front Axle
• Width [mm]: 37
• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 66
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: MAX

• Fitting Position: Front Axle Left, Front Axle Right
• Outer Diameter [mm]: 66
• Inner Diameter [mm]: 35
• Width [mm]: 37
• Manufacturer: JP GROUP
• Lisainfo: Wheel bearing, front
• Additional information: Wheel bearing, front

• Supplementary Article/Info 2: without wheel hub
• Fitting Position: Front Axle, Front Axle Left, Front Axle Right
• Fabrication Number: KLP-VW-002
• Manufacturer: NTY

• Fitting Position: Front Axle
• Width [mm]: 37
• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 66
• Net weight [kg]: 0.59
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: NK

• Fitting Position: Front Axle
• Width [mm]: 37
• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 66
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Alternative Repair Kit: 100 498 0020, 100 498 0032
• Fitting Position: Front Axle
• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 66
• Height [mm]: 37
• Bearing Type: Ball Bearing
• Name: RATTALAAGER
• Manufacturer: MEY

• Fitting Position: Front Axle both sides
• Quantity per axle: 2
• Inner Diameter [mm]: 35
• Width [mm]: 37
• Outer Diameter [mm]: 66
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle Left, Front Axle Right
• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 66
• Height [mm]: 37
• Bearing Type: Ball Bearing
• Lisainfo: Wheel bearing kit, for one front wheel
• Additional information: Wheel bearing kit, for one front wheel

• Fitting Position: Front Axle
• Width [mm]: 37
• Outer Diameter [mm]: 66
• Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY

• Fitting Position: Front Axle
• Width [mm]: 37
• Inner Diameter [mm]: 35
• Outer Diameter 1 [mm]: 66
• Manufacturer: METELLI LOZYSKA KOLA PIASTY

• Fitting Position: Front Axle Left, Front Axle Right
• Version: One
• Width 1 [mm]: 37
• Outer Diameter 1 [mm]: 66
• Inner Diameter 1 [mm]: 35
• Manufacturer: GSP

• Fitting Position: Front Axle Left, Front Axle Right
• Quantity per axle: 2
• Outer Diameter [mm]: 66
• Inner Diameter [mm]: 35
• Width [mm]: 37
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Supplementary Article/Info 2: with nut
• Full Set:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle both sides
• Width [mm]: 37
• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 66
• Manufacturer: JPN

• Fitting Position: Front Axle
• Required quantity: 2
• Manufacturer: DRIVE

• Fitting Position: Front Axle
• Width [mm]: 37
• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 66
• Quality class: PJ
• Name: Wheel bearing kit

• Fitting Position: Front Axle
• Width [mm]: 37
• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 66
• Supplementary Article/Info 2: with retaining ring, with screw, with nut
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: OPT

• Width [mm]: 37
• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 66
• Bearing Type: Angular Ball Bearing
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.636
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle Left, Front Axle Right
• Vehicle configuration line / variant: FRONT LR+FR
• for OE number: 6N0498625A
• Inner Diameter [mm]: 35
• Width 1 [mm]: 37
• Number of mounting bores: 1
• Name: DA KWD1435
• Manufacturer: DAYCO

• Fitting Position: Front Axle Left, Front Axle Right
• Inner Diameter 1 [mm]: 35
• Outer Diameter 1 [mm]: 66
• Weight [kg]: 0.6
• Width 1 [mm]: 37
• Manufacturer: A.B.S.

• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 66
• Width [mm]: 37
• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Front Axle
• Width [mm]: 37
• Weight [kg]: 0.6
• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 66
• Manufacturer: METALCAUCHO

• Quantity: 2
• Fitting Position: Front Axle
• Weight [kg]: 0.636
• Required quantity: 2
• Width [mm]: 37
• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 66
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Bearing Type: Angular Ball Bearing
• General Information: wheel bearing kit; front
• Manufacturer: VIKA

• Fitting Position: Front Axle
• Required quantity: 2
• Weight [kg]: 0.617
• Packaging length [cm]: 10.9
• Packaging width [cm]: 8.4
• Packaging height [cm]: 10.9
• Outer Diameter [mm]: 66
• Inner Diameter [mm]: 35
• Width [mm]: 37
• Manufacturer: CONTITECH-LOÅ»YSKA KÓŁ

• Fitting Position: Front Axle
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 66
• Width [mm]: 37
• SVHC: No SVHC present!
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: FAG

• Fitting Position: Front Axle
• Required quantity: 2
• Width [mm]: 37
• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 66
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: SKF

• Fitting Position: Front Axle
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 66
• Height [mm]: 37
• Bearing Type: Ball Bearing
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: MEY

General Information: With mounting materials, to fit most models. Please check fit accuracy before installation.

• Vehicle Identification Number (VIN) from: F 6N-XY379 992
• Fitting Position: Rear Axle Left, Rear Axle Right
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Rim Hole Number: 4
• Manufacturer: JP GROUP
• Lisainfo: Wheel hub with bearing, rear
• Additional information: Wheel hub with bearing, rear

Supplementary Article/Info 2: with integrated wheel bearing, with ABS sensor ring

• Fitting Position: Rear Axle
• Flange Diameter [mm]: 120
• Supplementary Article/Info 2: with ABS sensor ring
• Rim Hole Number: 4
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Rear Axle Left, Rear Axle Right
• Version: One
• Thread Size: M12X1,5
• Number of Teeth, ABS ring: 43
• Inner Diameter [mm]: 28
• Outer Diameter [mm]: 120
• Rim Hole Number: 4
• Supplementary Article/Info 2: with ABS sensor ring
• Inner Diameter 2 [mm]: 28
• Manufacturer: GSP

• Fitting Position: Rear Axle
• Vehicle Identification Number (VIN) from: 6N-XY379992
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: Rear Axle, Rear Axle Left, Rear Axle Right
• Fabrication Number: KLT-VW-010
• Manufacturer: NTY

• Fitting Position: Rear Axle
• Rim Hole Number: 4
• Supplementary Article/Info 2: with ABS sensor ring
• Outer Diameter [mm]: 120
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: MAX

• Fitting Position: Rear Axle
• Inner Diameter [mm]: 28
• Outer Diameter [mm]: 120
• Braking/Driving Dynamics: for vehicles with ABS
• Guarantee: 4 years guarantee
• Weight [kg]: 1.8
• Number of Holes: 4
• Bolt Hole Circle Ø 1 [mm]: 100
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 29SKV012

• Fitting Position: Rear Axle
• Outer Diameter [mm]: 120
• Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY

• Fitting Position: Rear Axle Left, Rear Axle Right
• Quantity per axle: 2
• Rim Hole Number: 4
• Centering Diameter [mm]: 70
• Manufacturer: TOPRAN

Supplementary Article/Info 2: with ABS sensor ring, with grease cap, with nut, Wheel Bearing integrated into wheel hub General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Rotation angle [°]: 45
• Tightening Torque [Nm]: 50, 200
• Fitting Position: Front Axle Right, Front Axle Left
• Manufacturer: SNR /NTN-SNR/

• Vehicle Identification Number (VIN) from: 6N-XY379991
• Fitting Position: Rear Axle Left, Rear Axle Right
• Inner Diameter 1 [mm]: 28
• Outer Diameter 1 [mm]: 120
• Height 1 [mm]: 64
• Rim Hole Number: 4
• Weight [kg]: 2.68
• Number of Teeth, ABS ring: 43
• Manufacturer: A.B.S.

Supplementary Article/Info 2: with integrated wheel bearing, with ABS sensor ring

• Fitting Position: Rear Axle
• Rim Hole Number: 4
• Flange Diameter [mm]: 120
• Supplementary Article/Info 2: with ABS sensor ring
• Quality class: PJ
• Name: Wheel hub

• Fitting Position: Rear Axle
• Width [mm]: 61.8
• Inner Diameter [mm]: 28
• Outer Diameter [mm]: 120
• Distance of mounting bores [mm]: 100
• Net weight [kg]: 1.71
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: NK

• Fitting Position: Rear Axle Left, Rear Axle Right
• Thread Size: M12X1,5
• Number of Teeth, ABS ring: 43
• Inner Diameter [mm]: 28
• Outer Diameter [mm]: 120
• Rim Hole Number: 4
• Supplementary Article/Info 2: with ABS sensor ring
• Inner Diameter 2 [mm]: 28
• Manufacturer: GSP

• Vehicle Identification Number (VIN) from: F 6N-XY379 992
• Fitting Position: Rear Axle
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Inner Diameter 1 [mm]: 28
• Outer Diameter [mm]: 120
• Bolt Hole Circle Ø [mm]: 100
• Number of Teeth, ABS ring: 43
• Rim Hole Number: 4
• Bearing Type: Ball Bearing
• Name: RATTARUMM
• Manufacturer: MEY

Supplementary Article/Info 2: with integrated wheel bearing, with ABS sensor ring General Information: With mounting materials, to fit most models. Please check fit accuracy before installation.

• Fitting Position: Rear Axle Left, Rear Axle Right
• Vehicle configuration line / variant: REAR LR+RE
• for OE number: 6X0598477
• Inner Diameter [mm]: 28
• Width 1 [mm]: 64
• Supplementary Article/Info 2: with integrated ABS sensor
• Number of mounting bores: 1
• Name: DA KWD1076
• Manufacturer: DAYCO

• Fitting Position: Rear Axle
• Required quantity: 2
• Rim Hole Number: 4
• Supplementary Article/Info 2: with ABS sensor ring
• Manufacturer: DRIVE

• Quantity: 2
• Fitting Position: Rear Axle
• Number of Holes: 4
• Weight [kg]: 2.428
• Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub
• Bolt Hole Circle Ø [mm]: 100
• Width [mm]: 65
• Inner Diameter [mm]: 28
• Outer Diameter [mm]: 120
• Bearing Type: Angular Ball Bearing
• General Information: wheel hub with bearing; rear
• Manufacturer: VIKA

• Width [mm]: 65
• Inner Diameter [mm]: 28
• Outer Diameter [mm]: 120
• Bolt Hole Circle Ø [mm]: 100
• Number of Holes: 4
• Bearing Type: Angular Ball Bearing
• Fitting Position: Rear Axle Left, Rear Axle Right
• Weight [kg]: 2.55
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Manufacturer: FEBI BILSTEIN

Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub, with ABS sensor ring General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Vehicle Identification Number (VIN) from: 6N-XY379992
• Vehicle Identification Number (VIN) to: 6N-2-010000
• Width [mm]: 61.8
• Inner Diameter [mm]: 28
• Outer Diameter [mm]: 120
• Manufacturer: OPTIMAL

• Fitting Position: Rear Axle
• Required quantity: 2
• Weight [kg]: 1.762
• Packaging length [cm]: 13.7
• Packaging width [cm]: 13.1
• Packaging height [cm]: 7.3
• Supplementary Article/Info 2: with ABS sensor ring
• Outer Diameter [mm]: 120
• Rim Hole Number: 4
• Manufacturer: CONTITECH-LOÅ»YSKA KÓŁ

• Vehicle Identification Number (VIN): [6H-X-027501;], [6NXY379992;]
• Number of Holes: 4
• Supplementary Article/Info 2: with rubber mount
• Inner Diameter 1 [mm]: 28
• Width 1 [mm]: 62
• Tightening Torque [Nm]: 175
• Number of pins: 43
• Outer Diameter 1 [mm]: 120
• Fitting Position: Rear Axle Right, Rear Axle Left
• Manufacturer: SNR
• Name: SN R154.45

• Fitting Position: Rear Axle
• Required quantity: 2
• Flange Diameter [mm]: 120
• Rim Hole Number: 4
• Supplementary Article/Info 2: with ABS sensor ring
• Manufacturer: SKF
• Name: SK VKBA3548