Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Construction Year to: 04.2002
-
Vehicle Identification Number (VIN) to: 2-
500 000 - for OE number: 023906262
- Quality: OE
- Manufacturer Restriction: DENSO
- Thread Size: M18x1.5
-
Cable Length [mm]: 1,
250 - Number of pins: 4
- Weight [g]: 160
- Gross Weight [g]: 193
- Manufacturer: DENSO
-
Name: DN DOX-
2012
Oxygen Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased, Oxygen Sensor
Additional information: "Tootja: DENSO
PASSAT VARIANT (3B5)
(kvaliteediklass: Q)"
Lisainfo: "Tootja: DENSO
PASSAT VARIANT (3B5)
(kvaliteediklass: Q)"
- Construction Year from: 05.2002
-
Vehicle Identification Number (VIN) from: 3-
000 001 - for OE number: 07C906262AG
- Quality: OE
- Manufacturer Restriction: DENSO
- Thread Size: M18x1.5
-
Cable Length [mm]: 1,
700 - Number of pins: 4
- Weight [g]: 195
- Gross Weight [g]: 228
- Manufacturer: DENSO
Oxygen Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased, Oxygen Sensor
Additional information: "Tootja: DENSO
GOLF IV (1J1), 08.97
(kvaliteediklass: Q)"
Lisainfo: "Tootja: DENSO
GOLF IV (1J1), 08.97
(kvaliteediklass: Q)"
- Oxygen Sensor: Regulating Probe
- Number of circuits: 4
- Manufacturer: KAMOKA
- Oxygen Sensor: Oxygen Sensor
- Voltage [V]: 12
- Number of circuits: 4
- Weight [kg]: 0.09
- Resistor [Ohm]: 9
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Manufacturer: ENERGY
- Oxygen Sensor: Oxygen Sensor
- Voltage [V]: 12
- Guarantee: 3 years guarantee
- Number of circuits: 4
- Weight [kg]: 0.09
- Resistor [Ohm]: 9
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 09SKV909
- Construction Year from: 05.2002
-
Oxygen Sensor: Diagnostic Probe,
Finger probe - Fitting Position: after catalytic converter
- Number of circuits: 4
- Connector/Clamp: Connector may need adjustment
- Transmission Type: Manual Transmission
- Name: LAMBDA ANDUR
- Manufacturer: MAX
- Construction Year to: 04.2002
-
Oxygen Sensor: Diagnostic Probe,
Heated - Fitting Position: after catalytic converter
- Number of circuits: 4
- Connector/Clamp: Connector may need adjustment
- Name: LAMBDA ANDUR
- Manufacturer: MAX
-
Lisainfo: MGS-
615 -
Additional information: MGS-
615
- Construction Year from: 01.2001
- Construction Year to: 04.2002
-
Vehicle Identification Number (VIN) to: 2-
500 000 - Oxygen Sensor: Diagnostic Probe
-
Length [mm]: 1,
250 - Number of connectors: 4
- Manufacturer: VERNET
-
Vehicle Identification Number (VIN) to: 2-
500 000 - Engine Code: AZX
- Oxygen Sensor: Unheated
- Number of pins: 4
-
Cable Length [mm]: 1,
050 - Quality: OE EQUIVALENT
- for OE number: 058906265B
- Manufacturer: MEAT&DORIA
- Conductor Number: 4
-
Length [mm]: 1,
731 - Number of circuits: 4
- Resistor [Ohm]: 9
-
Cable Length [mm]: 1,
731 - Oxygen Sensor: Heated
- Name: LAMBDA ANDUR
- Manufacturer: MAG
-
Oxygen Sensor: Regulating Probe,
Thread pre- greased - Number of circuits: 5
- Fitting Position: before catalytic converter
-
Fabrication Number: ESL-
AU- 002 - Manufacturer: NTY
-
Name: NTY ESL-
AU- 002
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Engine Code: AZX
- Construction Year from: 05.2002
-
Line insulation design: with silicone-
coated woven- fibre insulation - Conductor Number: 4
-
Length [mm]: 1,
700 - Connector Shape: D Shape
-
Thread Size: M18 x 1,
5 - Catalytic Converter Type: for vehicles with catalytic converter
-
Cable Length [mm]: 1,
700 - Number of pins: 4
- Number of circuits: 4
-
Oxygen Sensor: Thread pre-
greased - Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Construction Year to: 04.2002
- Oxygen Sensor: Diagnostic Probe
- Fitting Position: after catalytic converter
- Number of circuits: 4
-
Recommended change interval [km]: 160,
000 - Connector/Clamp: Connector may need adjustment
- Name: LAMBDA ANDUR
- Manufacturer: BOS
- Quality: OE
- Manufacturer Restriction: DENSO
- Thread Size: M18x1.5
- Cable Length [mm]: 750
- Number of pins: 4
- Weight [g]: 93
- Gross Weight [g]: 140
- Manufacturer: DENSO
-
Name: DN DOX-
0150 - Quality class: Q
Oxygen Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased, Oxygen Sensor
Additional information: "Tootja: DENSO
(kvaliteediklass: Q)"
Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"
- Construction Year from: 05.2002
- Oxygen Sensor: Diagnostic Probe
- Fitting Position: after catalytic converter
- Number of circuits: 4
-
Recommended change interval [km]: 160,
000 - Connector/Clamp: Connector may need adjustment
- Name: LAMBDA ANDUR
- Manufacturer: BOS
- Engine Code: AZX
- Construction Year to: 04.2002
-
Oxygen Sensor: Regulating Probe,
Heated - Fitting Position: before catalytic converter
- Number of circuits: 5
-
Length [mm]: 1,
500 - Name: LAMBDA ANDUR
- Manufacturer: MAX
-
Oxygen Sensor: Diagnostic Probe,
Thread pre- greased - Fitting Position: after catalytic converter
-
Line insulation design: with silicone-
coated woven- fibre insulation -
Overall Length [mm]: 1,
800 - Number of pins: 4
-
Recommended change interval [km]: 160,
000 - Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Construction Year to: 04.2002
- Number of pins: 5
-
Overall Length [mm]: 1,
510 - Oxygen Sensor: Regulating Probe
-
Manufacturer: JP GROUP A/
S - Lisainfo: Lambda Sensor
- Additional information: Lambda Sensor
- Oxygen Sensor: Regulating Probe
-
Length [mm]: 1,
700 - Number of pins: 4
- Supplementary Article/Info 2: with mounting manual
- Manufacturer: FAE
- Fitting Position: before catalytic converter
- Rated Voltage [V]: 12
- Number of pins: 6
- Connector Shape: oval
-
Cable Length [mm]: 1,
510 -
Overall Length [mm]: 1,
538 - Spanner Size: 22
- Thread Size: M 18
- Thread Pitch [mm]: 1.5
- Supplementary Article/Supplementary Info: with cable tie
-
Supplementary Article/Info 2: with plastic socket,
with heat shield pipe - Lubrication: with grease lubrication
- Full Set:
- Manufacturer: TOPRAN
Oxygen Sensor: Regulating Probe, Broadband oxygen sensor, Heated, Planar probe General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Construction Year to: 04.2002
-
Oxygen Sensor: Diagnostic Probe,
Regulating Probe - Fitting Position: after catalytic converter
- Required quantity: 1
-
Cable Length [mm]: 1,
750 - Number of pins: 4
- Assy./disassy. by qualified personnel required!:
- Manufacturer: HELLA
- Name: HE 6PA358066391
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Number of circuits: 5
-
Length [mm]: 1,
510 - Conductor Number: 5
-
Cable Length [mm]: 1,
510 - Oxygen Sensor: Heated
- Name: LAMBDA ANDUR
- Manufacturer: MAG
- Number of pins: 5
- Connector Shape: D Shape
-
Cable Length [mm]: 1,
360 - Fitting Position: Exhaust Manifold
- Oxygen Sensor: Broadband oxygen sensor
- Quality: OE EQUIVALENT
- for OE number: 022906262H
- Manufacturer: MEAT&DORIA
- Oxygen Sensor: Heated
-
Recommended change interval [km]: 160,
000 - Connector/Clamp: Connector may need adjustment
- Number of pins: 4
- Overall Length [mm]: 750
- General Information: lambda probe
- Manufacturer: BORSEHUNG
- Oxygen Sensor: Oxygen Sensor
- Voltage [V]: 12
- Colour: red
- Guarantee: 3 years guarantee
- Number of circuits: 5
- Weight [kg]: 0.15
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 09SKV905
- Construction Year from: 01.2001
- Construction Year to: 04.2002
-
Vehicle Identification Number (VIN) to: 2-
500 000 -
Oxygen Sensor: Planar probe,
Thread pre- greased, Heated - Number of pins: 4
-
Cable Length [mm]: 1,
800 -
Thread Size: M18x1,
5 - Switch Pressure [bar]: 4
- Connector Shape: oval
- Manufacturer: VALEO
Fitting Position: before catalytic converter, after catalytic converter
- Oxygen Sensor: Regulating Probe
- Fitting Position: before catalytic converter
-
Length [mm]: 1,
500 - Number of pins: 6
- Manufacturer: FAE
- Construction Year to: 04.2002
-
Oxygen Sensor: Regulating Probe,
Oxygen Sensor, Heated - Fitting Position: before catalytic converter
- Quantity: 1
- Cable Length [mm]: 950
- Name: LAMBDA ANDUR
- Manufacturer: DLP
- Construction Year to: 04.2002
- Oxygen Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Number of circuits: 5
- Overall Length [mm]: 760
-
Recommended change interval [km]: 160,
000 - Name: LAMBDA ANDUR
- Manufacturer: BOS
- Oxygen Sensor: Oxygen Sensor
- Guarantee: 3 years guarantee
- Weight [kg]: 0.15
- Always compare old and new part (in particular OE No.):
- Technical Information: Universal
- Manufacturer: SKV GERMANY
- Name: CE 09SKV915
-
Oxygen Sensor: Regulating Probe,
Oxygen Sensor - Construction Year to: 04.2002
- Exhaust System: before catalytic converter
- Voltage [V]: 12
- Guarantee: 3 years guarantee
- Weight [kg]: 0.16
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 09SKV907
- Oxygen Sensor: Heated
- Conductor Number: 5
- General Information: lambda probe; 5 wire
- Manufacturer: VIKA
- Construction Year to: 04.2002
- Fitting Position: before catalytic converter
- Required quantity: 1
- Oxygen Sensor: Regulating Probe
-
Cable Length [mm]: 1,
500 - Number of pins: 6
- Exhaust System: before catalytic converter
- Assy./disassy. by qualified personnel required!:
-
SVHC: 7439-
92- 1; Lead - Manufacturer: HELLA
- Name: HE 6PA009166821
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Construction Year from: 05.2002
- Oxygen Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Number of circuits: 5
-
Overall Length [mm]: 1,
720 -
Recommended change interval [km]: 250,
000 - Name: LAMBDA ANDUR
- Manufacturer: BOS
- Construction Year to: 04.2002
- Fitting Position: Front
- Quantity: 1
-
Line insulation design: with silicone-
coated woven- fibre insulation - Conductor Number: 5
-
Thread Size: M18 x 1,
5 - Connector Shape: D Shape
-
Cable Length [mm]: 1,
510 - Supplementary Article/Supplementary Info: with cable tie
-
Oxygen Sensor: Broadband oxygen sensor,
Thread pre- greased - Number of circuits: 5
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks