• Fitting Position: inner, Front Axle, Lower, Front
• Control/Trailing Arm Type: Control Arm
• Mounting Type: Rubber-Metal Mount
• Lisainfo: AUDI A4 AVANT / QUATTRO
• Additional information: AUDI A4 AVANT / QUATTRO

• Quantity per axle: 2
• Control/Trailing Arm Type: for control arm
• Fitting Position: Front Axle, Lower, Front, inner, both sides
• Article number of recommended accessories: 39430 01
• Observe service information:
• Name: Puks - K„„ndmik VW P. A4/PASSAT 97-
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer!

• Vehicle Identification Number (VIN) to: 3B-3-450 000
• Manufacturer: JP GROUP
• Lisainfo: Bolts, nuts and washer for JP item no. 1140100210
• Additional information: Bolts, nuts and washer for JP item no. 1140100210

• Fitting Position: Front Axle Left, Front Axle Right, inner
• Mounting Type: Rubber-Metal Mount
• Manufacturer: JP-GROUP
• Lisainfo: Rubber mount for wishbone, front, rear
• Additional information: Rubber mount for wishbone, front, rear

• Suspension: for vehicles without sports suspension
• Fitting Position: Upper Front Axle, inner
• Manufacturer: JP GROUP
• Lisainfo: Rubber mount for wishbone, front
• Additional information: Rubber mount for wishbone, front

Lisainfo: Rubber mount for wishbone, front, outer

• Fitting Position: Front Axle, Upper
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Inner Diameter [mm]: 10
• Outer Diameter [mm]: 46
• Width [mm]: 40
• SVHC: No SVHC present!
• Name: Puks
• Manufacturer: FAG

• Quantity per packing unit: 5
• Control/Trailing Arm Type: for control arm
• Axle alignment required after fitting:
• Fitting Position: inner, Upper, Front Axle
• Mounting Type: Rubber-Metal Mount
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Material: Rubber/Metal
• Thickness [mm]: 49
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 40, 24
• Manufacturer: MERTZ

Fitting Position: Front Axle Left, Front Axle Right, Lower, Front, outer

Lisainfo: Rubber mount for wishbone, front

• Installatsiooni pool: Esisild
• Laagritüüp: Kummi-metalllaager
• Roolimisliik: õõtshoova jaoks
• Kõrgus (mm): 40
• Välisläbimõõt [mm]: 46
• Siseläbimõõt [mm]: 10
• Kaal (kg): 0,07
• Name: DY 37-06034-5
• Manufacturer: DYS

• Installatsiooni pool: Pealis
• Laagritüüp: Kummi-metalllaager
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
AUDI A4/6/8/ VW PASS
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
AUDI A4/6/8/ VW PASS
(kvaliteediklass: PJ)"

• Quantity per packing unit: 2
• Diameter [mm]: 46
• Mounting Type: Rubber-Metal Mount
• Height [mm]: 40
• Axle alignment required after fitting:
• Fitting Position: both sides, inner, Upper Front Axle
• Control/Trailing Arm Type: for control arm
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front Axle, Lower, both sides, Front, outer
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 40.3
• Weight [kg]: 0.1
• Required quantity: 2
• Control/Trailing Arm Type: for control arm
• Manufacturer: TEDGUM

• Fitting Position: Front Axle, Lower
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 40
• Width [mm]: 50
• SVHC: No SVHC present!
• Manufacturer: FAG
• Name: LU 829009810

• Fitting Position: Front Axle Left, Upper, Front Axle Right
• Manufacturer: GSP

• Outer Diameter 1 [mm]: 40
• Inner Diameter 1 [mm]: 12
• Thickness 1 [mm]: 50
• Manufacturer: BGA

Fitting Position: outer, Lower, Front, Front Axle Left, Front Axle Right

• Installatsiooni pool: Esisild, kese
• Laagritüüp: Kummi-metalllaager
• Roolimisliik: õõtshoova jaoks
• Kõrgus (mm): 50
• Välisläbimõõt [mm]: 40
• Siseläbimõõt [mm]: 12
• Kaal (kg): 0,11
• Name: DY 37-06046-6
• Manufacturer: DYS

• Fitting Position: Front Axle, inner, Upper, Lower, Front, Rear
• Inner Diameter 1 [mm]: 10
• Outer Diameter 1 [mm]: 47
• Thickness 1 [mm]: 40
• Name: DE TD437W
• Manufacturer: DELPHI

• Length [mm]: 60
• Material: Rubber/Metal
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 50
• Manufacturer: MERTZ

Fitting Position: Front Axle Left, Front Axle Right, Lower, Front, inner

• Fitting Position: Front, Lower Front Axle, outer
• Weight [kg]: 0.095
• Material: Rubber/Metal
• Thickness [mm]: 49
• Required quantity: 2
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 40, 24
• General Information: control arm bush
• Manufacturer: VIKA

• Fitting Position: Front Axle, Lower, Front, outer, both sides
• Control/Trailing Arm Type: for control arm
• Name: Puks - K„„ndmik VW P. A4/A6/A8/PASSAT 97- DOLNA
• Manufacturer: MAX

• Fitting Position: Front Axle, outer, Lower, Front
• Inner Diameter 1 [mm]: 12
• Outer Diameter 1 [mm]: 40
• Thickness 1 [mm]: 50
• Name: DE TD441W
• Manufacturer: DELPHI

• Fitting Position: Rear Axle Left, Rear Axle Right
• Manufacturer: GSP ZAWIESZENIE

• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Fitting Position: Front Axle, Upper, both sides, Front, Rear, inner
• Length [mm]: 40
• Inner Diameter [mm]: 10.1
• Outer Diameter [mm]: 46.4
• Quantity per axle: 4
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Lower Front Axle
• Fabrication Number: ZTP-AU-005A
• Manufacturer: NTY

• Installatsiooni pool: esisild mõlemapoolselt, üleval
• Siseläbimõõt [mm]: 10,2
• Välisläbimõõt [mm]: 46
• Kõrgus (mm): 40
• Name: ALT 80928AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: inner, Upper Front Axle
• Weight [kg]: 0.078
• Material: Rubber/Metal
• Thickness [mm]: 40
• Inner Diameter [mm]: 10
• Outer Diameter [mm]: 47, 23
• General Information: control arm bush
• Manufacturer: VIKA

• Fitting Position: Upper Front Axle, inner
• Material: Rubber/Metal
• Outer Diameter [mm]: 46
• Manufacturer: KAMOKA

• Fitting Position: Front Axle, Lower
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 50
• Width 1 [mm]: 32
• Width 2 [mm]: 60
• SVHC: No SVHC present!
• Manufacturer: FAG
• Name: LU 829009710

• Fitting Position: Front Axle Left, Front Axle Right, Lower, inner
• Manufacturer: JP GROUP
• Lisainfo: Rubber mount for wishbone, front, inner
• Additional information: Rubber mount for wishbone, front, inner

• Thickness [mm]: 40
• Mounting Type: Rubber-Metal Mount
• Outer Diameter 1 [mm]: 46
• Outer Diameter 2 [mm]: 47
• Inner Diameter 1 [mm]: 10
• Manufacturer: BGA

Fitting Position: Front Axle Left, Upper Front Axle, Front Axle Right

• Quantity per packing unit: 2
• Fitting Position: Front Axle
• Weight [kg]: 0.08
• Height 1 [mm]: 26
• Height 2 [mm]: 39.8
• Inner Diameter [mm]: 10
• Outer Diameter [mm]: 46.4
• Control/Trailing Arm Type: Control Arm
• Weight [g]: 80
• Manufacturer: METALCAUCHO

• Fitting Position: Front Axle both sides, Upper, inner
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Outer Diameter [mm]: 46.4
• Inner Diameter [mm]: 10
• Weight [kg]: 0.086
• Length [mm]: 40
• Manufacturer: RTS

• Thickness [mm]: 49
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 40, 24
• Material: Rubber/Metal
• Weight [kg]: 0.095
• Observe service information:
• Name: Puks - K„„ndmik VW P. A4/A6/A8
• Manufacturer: FEB

Fitting Position: Front Axle Left, Lower, Front, outer, Front Axle Right Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 60
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 50
• Material: Rubber/Metal
• Weight [kg]: 0.202
• Observe service information:
• Name: Puks - K„„ndmik VW P. A4/PASSA
• Manufacturer: FEB

Fitting Position: Front Axle Left, Lower, Front, inner, Front Axle Right Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Required quantity: 2
• Weight [kg]: 0.08
• Inner Diameter [mm]: 10
• Fitting Position: both sides, Front, Upper Front Axle, Rear
• Outer Diameter [mm]: 46.4
• Manufacturer: TEDGUM

• Fitting Position: Front Axle, Front, inner, Right, Left
• Outer Diameter [mm]: 50.2
• Inner Diameter [mm]: 12.2
• Weight [kg]: 0.2
• Name: COC 21652815
• Manufacturer: CORTECO

• Thickness [mm]: 49
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 40, 24
• Material: Rubber/Metal
• Weight [kg]: 0.092
• Observe service information:
• Name: SW 32 69 0003
• Manufacturer: SWAG

Fitting Position: Front Axle Left, Lower, Front, outer, Front Axle Right Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle, inner, Lower, Front
• Inner Diameter 1 [mm]: 12
• Outer Diameter 1 [mm]: 50
• Thickness 1 [mm]: 60
• Manufacturer: DELPHI
• Name: DE TD440W

• Length [mm]: 60
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 50
• Material: Rubber/Metal
• Weight [kg]: 0.202
• Observe service information:
• Name: SW 30 60 0031
• Manufacturer: SWAG

Fitting Position: Front Axle Left, Lower, Front, inner, Front Axle Right Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Inner Diameter [mm]: 12
• Fitting Position: Front, Lower Front Axle, both sides
• Outer Diameter [mm]: 50.3
• Required quantity: 2
• Weight [kg]: 0.185
• Name: Puks
• Manufacturer: TED

• Suspension: for vehicles without sports suspension
• Fitting Position: Front Axle Right, Front Axle Left, Upper
• Height [mm]: 40
• Inner Diameter [mm]: 10
• Outer Diameter [mm]: 47
• Supplementary Article/Supplementary Info: without holder
• reinforced version:
• Required quantity: 2
• Replace in pairs only:
• Name: Puks - K„„ndmik VW P. A4/A6/A8 97-
• Manufacturer: MEY

General Information: 4-year warranty on all MEYLE-HD parts. Engineered and quality approved in Germany.

• Fitting Position: inner, Front, Front Axle both sides, Lower
• Weight [kg]: 0.202
• Length [mm]: 60
• Material: Rubber/Metal
• Required quantity: 2
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 50
• General Information: control arm bush
• Manufacturer: VIKA

• Fitting Position: Rear Axle, Upper
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 36.5
• for OE number: 8E0505185C
• Manufacturer: SASIC

• Installatsiooni pool: Pealis
• Laagritüüp: Kummi-metalllaager
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
AUDI A4/6/8/ VW PASS
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
AUDI A4/6/8/ VW PASS
(kvaliteediklass: PJ)"

• Height [mm]: 60
• Inner Diameter [mm]: 32
• Outer Diameter [mm]: 50
• Supplementary Article/Supplementary Info: without holder
• reinforced version:
• Required quantity: 2
• Replace in pairs only:
• Name: Puks - K„„ndmik VW P. A4/PASSA
• Manufacturer: MEY

Fitting Position: inner, Front, Lower, Front Axle Left, Front Axle Right General Information: 4-year warranty on all MEYLE-HD parts. Engineered and quality approved in Germany.

• Fitting Position: Front Axle Left, Front Axle Right, Lower, outer
• for OE number: 4D0 407 181 F
• Manufacturer: GSP

• Installatsiooni pool: Esisild, väljas
• Laagritüüp: Kummi-metalllaager
• Roolimisliik: õõtshoova jaoks
• Kõrgus (mm): 60
• Välisläbimõõt [mm]: 50
• Siseläbimõõt [mm]: 12
• Kaal (kg): 0,22
• Name: DY 37-06046-5
• Manufacturer: DYS

• Fitting Position: Lower, inner, Front
• Material: Rubber/Metal
• Outer Diameter [mm]: 50
• Manufacturer: KAMOKA

• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Fitting Position: Front Axle both sides, Lower, inner, Front
• Outer Diameter [mm]: 50.3
• Inner Diameter [mm]: 12.2
• Length [mm]: 60
• Weight [kg]: 0.202
• Manufacturer: RTS

• Thickness [mm]: 50
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 36, 47
• Material: Rubber/Metal
• Fitting Position: Rear Axle Left, Upper, Rear Axle Right
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.117
• Name: Puks - K„„ndmik VW T. A6 97- LE/PR
• Manufacturer: FEB

Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Thickness [mm]: 50
• Inner Diameter [mm]: 12.2
• Outer Diameter [mm]: 36.4, 47
• Material: Rubber/Metal
• Fitting Position: Rear Axle Left, Upper, Rear Axle Right
• Mounting Type: Rubber-Metal Mount
• Outer Diameter 2 [mm]: 42.3
• Weight [kg]: 0.12
• Name: SW 30 92 9940
• Manufacturer: SWAG

Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle, Upper, both sides, Front, Rear
• Quantity per axle: 4
• Name: Puks - K„„ndmik VW P. A4/PASSAT 01-
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer!

• for PR number: D3E, M3E, M70, MC9, MK6, MR2, MT0, MT1
• Model Year to: 2002
• Fitting Position: Front, Rear, Upper Front Axle, outer
• Weight [kg]: 0.135
• Packaging length [cm]: 4.6
• Packaging width [cm]: 4.6
• Packaging height [cm]: 4
• Manufacturer: FEBEST

• Installatsiooni pool: Pealis
• Laagritüüp: Kummi-metalllaager
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
AUDI A4/6/8/ VW PASS
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
AUDI A4/6/8/ VW PASS
(kvaliteediklass: PJ)"

• Installatsiooni pool: Esisild, all, ees, sees
• Siseläbimõõt [mm]: 12
• Välisläbimõõt [mm]: 24
• Kõrgus (mm): 60
• Name: ALT 80990AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: Front Axle both sides, Front, Lower, inner
• Required quantity: 2
• paired article number: VKDS 331013
• Height [mm]: 60
• Inner Diameter [mm]: 12.2
• Outer Diameter [mm]: 24
• Name: SK VKDS331013
• Manufacturer: SKF

• Quantity: 2
• Inner Diameter [mm]: 12.2
• Outer Diameter [mm]: 50.4
• Length [mm]: 60
• paired article number: 270327
• Weight [kg]: 0.21
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

Fitting Position: in front of axle, Front Axle Left, Front Axle Right, Lower

• Installatsiooni pool: Pealis
• Laagritüüp: Kummi-metalllaager
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
A.A6/A8/VW THEATON
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
A.A6/A8/VW THEATON
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle, inner
• Axle: 1st front axle
• Height [mm]: 40
• Weight [kg]: 0.102
• Required quantity: 4
• Inner Diameter [mm]: 10.1
• Outer Diameter [mm]: 46.3
• Control/Trailing Arm Type: Control Arm
• Mounting Type: Rubber-Metal Mount
• Packaging length [cm]: 11
• Packaging width [cm]: 6
• Packaging height [cm]: 6
• Manufacturer: MONROE

• Thickness [mm]: 30
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 52, 36
• Material: Rubber/Metal
• Fitting Position: Rear Axle, outer
• Weight [kg]: 0.061
• Name: Puks - K„„ndmik VW T. A4/A6/PASSAT 4MOTION/QUATTRO
• Manufacturer: FEB

Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: outer, both sides, Rear, Rear Axle
• Inner Diameter [mm]: 12
• Control/Trailing Arm Type: for control arm
• Weight [kg]: 0.14
• Required quantity: 2
• Outer Diameter [mm]: 36.4
• Name:
• Manufacturer: TED

• Fitting Position: Front Axle, Lower, both sides, Rear
• Mounting Type: Hydro Mount
• Control/Trailing Arm Type: for control arm
• Width [mm]: 80
• Outer Diameter [mm]: 65
• Inner Diameter [mm]: 12
• Name: Puks - K„„ndmik VW P. A4/PASSA
• Manufacturer: MAX

• Model Year from: 2003
• Fitting Position: inner, Rear Axle Lower
• Weight [kg]: 0.195
• Packaging length [cm]: 7
• Packaging width [cm]: 4.6
• Packaging height [cm]: 4.6
• Manufacturer: FEBEST

• Fitting Position: inner, Lower Front Axle
• Manufacturer: GSP

• Model Year to: 2002
• Fitting Position: Rear Axle Upper
• Weight [kg]: 0.135
• Packaging length [cm]: 5
• Packaging width [cm]: 4.6
• Packaging height [cm]: 4.6
• Manufacturer: FEBEST

for PR number: 1KD, 1KE, 1KF, 1KW, D3E, F0A, F4E, F4F, F4G, F4J, F4Q, F4X, M3E, M70, MC9, MK6, MR2, MT0, MT1

• Installatsiooni pool: Pealis
• Laagritüüp: Kummi-metalllaager
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
AUDI A4/6/8/ VW PASS
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
AUDI A4/6/8/ VW PASS
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle, inner, Lower, Rear
• Inner Diameter 1 [mm]: 12
• Outer Diameter 1 [mm]: 65
• Thickness 1 [mm]: 80
• Name: DE TD439W
• Manufacturer: DELPHI

• Installatsiooni pool: Pealis
• Laagritüüp: Kummi-metalllaager
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
A.A8 03-/VW PHEATON
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
A.A8 03-/VW PHEATON
(kvaliteediklass: PJ)"

• Vehicle Identification Number (VIN) to: 3B-3-450 000
• Special Purpose Vehicle: not for armoured vehicles, not for police vehicles
• not for PR number: F4G, F4S
• Block Separation:
• for OE number: KIT 02
• Fitting Position: Front Axle both sides
• Guarantee: 3 years guarantee
• Always compare old and new part (in particular OE No.):
• Weight [kg]: 1.6
• Control/Trailing Arm Type: Control Arm
• Manufacturer: SKV GERMANY
• Name: CE 04SKV111

• Fitting Position: Rear Axle Right, Rear Axle Left
• Height [mm]: 50
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 36
• Supplementary Article/Supplementary Info: without holder
• Required quantity: 2
• replacement in pairs recommended:
• Name: Puks - K„„ndmik VW T. A6 LE/PR
• Manufacturer: MEY

• Thickness [mm]: 30
• Inner Diameter [mm]: 12.2
• Outer Diameter [mm]: 36, 47
• Material: Rubber/Metal
• Fitting Position: Rear Axle, outer
• Weight [kg]: 0.88
• Name: Puks - K„„ndmik VW T. A6/PASSAT QUATTRO
• Manufacturer: FEB

Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Model Year from: 2003
• Fitting Position: Rear Axle Lower
• Weight [kg]: 0.11
• Packaging length [cm]: 5.1
• Packaging width [cm]: 5.1
• Packaging height [cm]: 2.9
• Manufacturer: FEBEST

• Inner Diameter [mm]: 12.1
• Outer Diameter [mm]: 64
• Length [mm]: 80
• paired article number: 270437
• Weight [kg]: 0.51
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

Fitting Position: behind the axle, Front Axle Right, Front Axle Left, Lower

• Thickness [mm]: 30
• Inner Diameter [mm]: 12.2
• Outer Diameter [mm]: 36, 47
• Material: Rubber/Metal
• Fitting Position: Rear Axle, outer
• Weight [kg]: 0.88
• Name: SW 32 92 3568
• Manufacturer: SWAG

Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear, Lower, Front Axle Left, Front Axle Right
• Thickness [mm]: 80
• Outer Diameter 1 [mm]: 64
• Inner Diameter 1 [mm]: 12
• Manufacturer: BGA

• Quality: OE Performance
• Fitting Position: Front
• Colour: silver
• Weight [g]: 483
• Manufacturer: GATES

• Installatsiooni pool: Esisild
• Laagritüüp: Kummi-metalllaager
• Roolimisliik: õõtshoova jaoks
• Kõrgus (mm): 81
• Välisläbimõõt [mm]: 65
• Siseläbimõõt [mm]: 12
• Kaal (kg): 0,52
• Name: DY 37-06044-5
• Manufacturer: DYS

• Installatsiooni pool: esisild paremal, all, taga
• Siseläbimõõt [mm]: 12
• Välisläbimõõt [mm]: 65
• Kõrgus (mm): 80
• Name: ALT 80927AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: Front Axle, Rear, inner, Right, Left
• Total Length [mm]: 80
• Outer Diameter [mm]: 65
• Inner Diameter [mm]: 12.2
• Weight [kg]: 0.53
• Name: COC 21652814
• Manufacturer: CORTECO