• Supplementary Article/Info 2: with wheel hub, with integrated ABS sensor
• Fitting Position: Front Axle, Front Axle Left, Front Axle Right
• Fabrication Number: KLP-VW-018
• Manufacturer: NTY
• Name: NTY KLP-VW-018

• Supplementary Article/Info 2: with wheel hub
• Fabrication Number: KLP-VW-022
• Article number of recommended accessories: KLP-VW-022-Z
• Manufacturer: NTY
• Name: NTY KLP-VW-022

Fitting Position: Front Axle, Front Axle Left, Front Axle Right, Rear Axle

• for PR number: 1ZC, 1ZF
• Construction Year from: 06.2005
• Vehicle Identification Number (VIN) from: 1K-5B162041, 1K-5P027668, 1K-5P108282, 1K-5W572545
• Fitting Position: Front Axle Left, Front Axle Right
• Supplementary Article/Info 2: with integrated wheel bearing
• Rim Hole Number: 5
• Lisainfo: Wheel hub for disc brake, front, 85 mm
• Additional information: Wheel hub for disc brake, front, 85 mm

• Material: Metal
• Surface: Zinc-coated
• Name: GH 399961
• Manufacturer: AUTO-GH

Fitting Position: Front Axle, Front Axle Right, Front Axle Left, Lower Front Axle

• Length [mm]: 70
• External Thread [mm]: M16 x 1,5
• Bolt Head-/Nut Design: Female Star
• Quality/ Grade: 10.9
• Fitting Position: Rear Axle both sides
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Inner Diameter [mm]: 30
• Supplementary Article/Info 2: with wheel hub
• Fabrication Number: KLT-VW-013
• Manufacturer: NTY
• Name: NTY KLT-VW-013

Fitting Position: Rear Axle, Rear Axle Left, Rear Axle Right, Front Axle

• Construction Year to: 05.2006
• Fitting Position: Rear Axle
• Inner Diameter [mm]: 30
• Outer Diameter [mm]: 136.5
• Braking/Driving Dynamics: for vehicles with ABS
• Guarantee: 4 years guarantee
• Weight [kg]: 2.23
• Number of Holes: 5
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 29SKV011

• Fitting Position: Rear Axle
• for PR number: 0FG, 1KD
• Flange Diameter [mm]: 136.9
• Supplementary Article/Info 2: with integrated ABS sensor
• Width [mm]: 69
• Inner Diameter [mm]: 32
• Rim Hole Number: 5
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Rear Axle
• for PR number: 0FA, 0FC, 0FG, 0FV, 1KD, 1KE, 1KV, 1KY, 1KZ
• Flange Diameter [mm]: 136.5
• Supplementary Article/Info 2: with integrated ABS sensor
• Width [mm]: 68
• Inner Diameter [mm]: 30
• Rim Hole Number: 5
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Vehicle Identification Number (VIN) from: 1K-6-240 001, 1K-6-000 001
• for PR number: 1KD, 0FG
• Fitting Position: Rear Axle
• Inner Diameter [mm]: 32
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: Rear Axle
• Internal Toothing wheel side: 30
• Outer Diameter 2 [mm]: 136.5
• Number of mounting bores: 5
• Manufacturer: METELLI LOZYSKA KOLA PIASTY

• Construction Year to: 05.2006
• Fitting Position: Rear Axle
• Inner Diameter [mm]: 32
• Outer Diameter [mm]: 136.5
• Braking/Driving Dynamics: for vehicles with ABS
• Guarantee: 4 years guarantee
• Weight [kg]: 2.53
• Number of Holes: 5
• Always compare old and new part (in particular OE No.):
• Name: CE 29SKV006
• Manufacturer: ESEN SKV

• Construction Year to: 06.2005
• Block Separation:
• Vehicle Identification Number (VIN) from: 1K-6-240001
• for PR number: 0FG, 1KD
• Fitting Position: Rear Axle Left, Rear Axle Right
• Quantity per axle: 2
• Rim Hole Number: 5
• Bolt Hole Circle Ø [mm]: 112
• Centering Diameter [mm]: 32
• Manufacturer: TOPRAN

Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub, with grease cap, with screw General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Bolt Length [mm]: 59
• Fitting Position: Rear Axle
• Outer Diameter 2 [mm]: 136.9
• Number of mounting bores: 5
• Manufacturer: METELLI LOZYSKA KOLA PIASTY

• Fitting Position: Rear Axle Left, Rear Axle Right
• Inner Diameter [mm]: 32
• Thread Size: M14X1,5
• Number of Teeth, ABS ring: 86
• Outer Diameter [mm]: 136.5
• Rim Hole Number: 5
• Supplementary Article/Info 2: with integrated ABS sensor
• Inner Diameter 2 [mm]: 32
• Manufacturer: GSP

• Fitting Position: Front Axle
• for brake disc diameter [mm]: 288
• Width [mm]: 83
• Inner Diameter [mm]: 29
• Outer Diameter [mm]: 136.5
• Width 2 [mm]: 48
• Supplementary Article/Info 2: with integrated magnetic sensor ring
• Outer Diameter 2 [mm]: 81
• Inner Diameter 2 [mm]: 51
• Number of mounting bores: 4
• Manufacturer: OPTIMAL
• Additional information: 101017
• Lisainfo: 101017

• Fitting Position: Rear Axle
• Width [mm]: 67.8
• Inner Diameter [mm]: 30
• Outer Diameter [mm]: 136.5
• Manufacturer: JPN
• Lisainfo: 20L9013-JPN
• Additional information: 20L9013-JPN

• Fitting Position: Rear Axle
• Braking/Driving Dynamics: for vehicles with ABS
• Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY

• Vehicle Identification Number (VIN) from: 1K-4P025 001
• Fitting Position: Rear Axle
• Width [mm]: 69
• Inner Diameter [mm]: 30
• Outer Diameter [mm]: 136
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: Rear Axle
• Width [mm]: 67.7
• Inner Diameter [mm]: 32
• Outer Diameter [mm]: 136.5
• Manufacturer: JPN

• Fitting Position: Rear Axle Left, Rear Axle Right
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Supplementary Article/Info 2: with integrated wheel bearing
• Rim Hole Number: 5
• Manufacturer: JP-GROUP
• Lisainfo: Wheel hub with bearing, rear
• Additional information: Wheel hub with bearing, rear

• Vehicle Identification Number (VIN) from: 1K-4P025001
• Construction Year to: 06.2005
• Block Separation:
• Construction Year from: 06.2005
• for PR number: 1KE, 1KV, 1KY, 1KZ, 0FA, 0FC, 0FG, 0FV, 1KD
• Fitting Position: Rear Axle Left, Rear Axle Right
• Quantity per axle: 2
• Rim Hole Number: 5
• Outer Diameter [mm]: 136
• Bolt Hole Circle Ø [mm]: 112
• Centering Diameter [mm]: 30
• Manufacturer: TOPRAN

Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub, with grease cap, with screw General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Rear Axle Left, Rear Axle Right
• Inner Diameter [mm]: 30
• Thread Size: M14X1,5
• Number of Teeth, ABS ring: 86
• Outer Diameter [mm]: 136.5
• Rim Hole Number: 5
• Supplementary Article/Info 2: with integrated ABS sensor
• Inner Diameter 2 [mm]: 30
• Manufacturer: GSP
• Additional information: 9230082
• Lisainfo: 9230082

• Fitting Position: Rear Axle
• Braking/Driving Dynamics: for vehicles with ABS
• Inner Diameter 1 [mm]: 32
• Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY

• Supplementary Article/Info 2: with wheel bearing
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Manufacturer: JP GROUP
• Lisainfo: Wheel Hub
• Additional information: Wheel Hub

• Fitting Position: Rear Axle Left, Rear Axle Right
• Inner Diameter [mm]: 32
• Version: One
• Thread Size: M14X1,5
• Number of Teeth, ABS ring: 86
• Outer Diameter [mm]: 136.5
• Rim Hole Number: 5
• Supplementary Article/Info 2: with integrated ABS sensor
• Inner Diameter 2 [mm]: 32
• Manufacturer: GSP

• Fitting Position: Rear Axle
• for PR number: 0FA, 0FC, 0FG, 0FV, 1KD, 1KE, 1KV, 1KY, 1KZ
• Rim Hole Number: 5
• Inner Diameter [mm]: 30
• Flange Diameter [mm]: 136.5
• Supplementary Article/Info 2: with integrated ABS sensor
• Quality class: PJ
• Name: Wheel hub

• for PR number: 1LK, 1ZD, 1ZE, 1ZM, 1ZP
• Thread Size: M14X1,5
• Number of Teeth, ABS ring: 86
• Outer Diameter [mm]: 136.5
• Rim Hole Number: 5
• Supplementary Article/Info 2: with integrated ABS sensor
• Manufacturer: GSP

Fitting Position: Rear Axle Left, Rear Axle Right, Front Axle Left, Front Axle Right

• Fitting Position: Front Axle
• Width [mm]: 84
• Outer Diameter 2 [mm]: 137
• Number of mounting bores: 5
• Manufacturer: METELLI LOZYSKA KOLA PIASTY

• Quantity: 2
• Construction Year from: 04.2006
• Construction Year to: 04.2006
• Fitting Position: Rear Axle
• Number of Holes: 5
• Weight [kg]: 2.2
• Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub
• Required quantity: 2
• Bolt Hole Circle Ø [mm]: 112
• Width [mm]: 68.5
• Inner Diameter [mm]: 30
• Outer Diameter [mm]: 136
• Bearing Type: Angular Ball Bearing
• General Information: wheel hub with bearing; rear
• Manufacturer: VIKA

• Name: Wheel hub
• Quality class: PJ

Lisainfo: "Tootja: CX
(kvaliteediklass: PJ)"Tagaratta laager.

• Fitting Position: Rear Axle Left, Rear Axle Right
• Inner Diameter [mm]: 30
• Thread Size: M14X1,5
• Number of Teeth, ABS ring: 86
• Outer Diameter [mm]: 136.5
• Rim Hole Number: 5
• Inner Diameter 2 [mm]: 30
• Manufacturer: GSP

Supplementary Article/Info 2: with bolts/screws, with integrated ABS sensor, with cover

• Fitting Position: Front Axle
• for PR number: 1LJ, 1LK, 1ZD, 1ZE, 1ZM, 1ZP
• Flange Diameter [mm]: 137
• Supplementary Article/Info 2: with integrated ABS sensor
• Rim Hole Number: 5
• Manufacturer: DENCKERMANN FILTRY

• Quantity: 2
• Construction Year from: 04.2006
• Fitting Position: Rear Axle
• Number of Holes: 5
• Weight [kg]: 2.366
• Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub
• Required quantity: 2
• Bolt Hole Circle Ø [mm]: 112
• Width [mm]: 70
• Inner Diameter [mm]: 32
• Outer Diameter [mm]: 136
• Bearing Type: Angular Ball Bearing
• General Information: wheel hub with bearing; rear
• Manufacturer: VIKA

• Fitting Position: Rear Axle
• Width [mm]: 69
• Inner Diameter [mm]: 32
• Outer Diameter [mm]: 137
• Supplementary Article/Info 2: with integrated magnetic sensor ring
• Manufacturer: OPTIMAL
• Additional information: 102019A
• Lisainfo: 102019A

• Construction Year from: 06.2005
• Construction Year to: 05.2006
• Fitting Position: Front Axle
• Inner Diameter [mm]: 36
• Outer Diameter [mm]: 136.5
• Braking/Driving Dynamics: for vehicles with ABS
• Guarantee: 4 years guarantee
• Weight [kg]: 3.72
• Number of Holes: 5
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Fitting Position: Front Axle
• for PR number: 1ZF
• Flange Diameter [mm]: 136
• Supplementary Article/Info 2: with integrated ABS sensor, with bolts/screws
• Outer Diameter 1 [mm]: 80
• Rim Hole Number: 5
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Vehicle Identification Number (VIN) from: 1K-6-000 001
• Construction Year from: 06.2005
• Fitting Position: Front Axle
• Width [mm]: 84
• Outer Diameter 2 [mm]: 136
• Number of mounting bores: 5
• Manufacturer: METELLI LOZYSKA KOLA PIASTY

• Fitting Position: Rear Axle
• for PR number: 0FG, 1KD
• Rim Hole Number: 5
• Flange Diameter [mm]: 136.9
• Supplementary Article/Info 2: with integrated ABS sensor
• Quality class: PJ
• Name: Wheel hub

• Construction Year from: 06.2005
• Construction Year to: 05.2006
• Fitting Position: Front Axle
• Inner Diameter [mm]: 36
• Outer Diameter [mm]: 136.5
• Braking/Driving Dynamics: for vehicles with ABS
• Guarantee: 4 years guarantee
• Weight [kg]: 3.39
• Number of Holes: 5
• Bolt Hole Circle Ø 1 [mm]: 112
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 29SKV040

• Fitting Position: Rear Axle
• Weight [kg]: 2.425
• Packaging length [cm]: 16
• Packaging width [cm]: 16
• Packaging height [cm]: 11
• Outer Diameter [mm]: 136.5
• Inner Diameter [mm]: 32
• Width [mm]: 67.7
• Manufacturer: CONTITECH-LOÅ»YSKA KÓŁ

• Fitting Position: Rear Axle
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Outer Diameter [mm]: 136.5
• Inner Diameter [mm]: 32
• Width [mm]: 67.7
• SVHC: No SVHC present!
• Manufacturer: FAG
• Name: LU 713611000

• Vehicle Identification Number (VIN) from: 1K_4P025001
• Fitting Position: Rear Axle Left, Rear Axle Right
• Vehicle configuration line / variant: Ch.1K_4P025001 >
• for OE number: 8V0598611A
• Inner Diameter [mm]: 30
• Width 1 [mm]: 68
• Supplementary Article/Info 2: with integrated ABS sensor
• Number of mounting bores: 5
• Name: DA KWD1002
• Manufacturer: DAYCO

• Vehicle Identification Number (VIN) from: 1K_4P025001
• Vehicle Identification Number (VIN) to: 1K_4P025000
• Fitting Position: Rear Axle Left, Rear Axle Right
• Vehicle configuration line / variant: Ch. >1K_4P025000 #
• for OE number: 3G0598611A
• Inner Diameter [mm]: 32
• Width 1 [mm]: 70
• Supplementary Article/Info 2: with integrated ABS sensor
• Number of mounting bores: 5
• Name: DA KWD1005
• Manufacturer: DAYCO

• Fitting Position: Front Axle Left, Front Axle Right
• Vehicle Identification Number (VIN) from: 1K-5B162041, 1K-5P108282, 1K-5U027668, 1K-5W572545
• for PR number: 1ZC, 1ZF
• Block Separation:
• Rim Hole Number: 5
• Quantity per axle: 2
• Number of flange connections: 3
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Bolt Hole Circle Ø [mm]: 112
• Manufacturer: TOPRAN

Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub, with bolts/screws, with integrated magnetic sensor ring General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle
• for OE number: 1T0 498 621 SK
• Outer Diameter [mm]: 136
• Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY

• Engine Code: AXW, BLR, BLY, BLX, BVY, BVX, BVZ
• Block Separation:
• Construction Year from: 04.2006
• Width [mm]: 70
• Inner Diameter [mm]: 32
• Outer Diameter [mm]: 136
• Bolt Hole Circle Ø [mm]: 112
• Number of Holes: 5
• Bearing Type: Angular Ball Bearing
• Fitting Position: Rear Axle Left, Rear Axle Right
• Weight [kg]: 2.366
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Observe service information:
• Manufacturer: FEBI BILSTEIN
• Lisainfo: 23320 FEBI
• Additional information: 23320 FEBI

Supplementary Article/Info 2: with integrated magnetic sensor ring, Wheel Bearing integrated into wheel hub, with ABS sensor ring General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Right, Left, Rear Axle
• Number of Holes: 5
• Supplementary Article/Info 2: with rubber mount
• Inner Diameter 1 [mm]: 32
• Outer Diameter 1 [mm]: 136
• Width 1 [mm]: 69
• Rotation angle [°]: 180
• Tightening Torque [Nm]: 200
• Manufacturer: SNR
• Name: SN R154.54

• Fitting Position: Front Axle
• Construction Year from: 06.2005
• Vehicle Identification Number (VIN) from: 1K-6000001
• for OE number: 1K0498621
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: Front Axle
• for OE number: 1K0498621
• Outer Diameter [mm]: 136
• Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY

• Number of mounting bores: 3
• Outer Diameter [mm]: 136
• Inner Diameter [mm]: 30
• Fitting Position: Rear Axle Left, Rear Axle Right
• Manufacturer: AIC

Supplementary Article/Info 2: with integrated magnetic sensor ring, with fastening material, with screw, with grease cap, with wheel hub General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Rear Axle
• Width [mm]: 68.2
• Inner Diameter [mm]: 30
• Outer Diameter [mm]: 136.5
• Supplementary Article/Info 2: with integrated magnetic sensor ring
• Tightening Torque [Nm]: 180
• Rotation angle [°]: 180
• Manufacturer: OPTIMAL

• Engine Code: AXW, BLR, BLY, BLX, BVY, BVX, BVZ
• Block Separation:
• Construction Year from: 04.2006
• Width [mm]: 70
• Inner Diameter [mm]: 32
• Outer Diameter [mm]: 136
• Bolt Hole Circle Ø [mm]: 112
• Number of Holes: 5
• Bearing Type: Angular Ball Bearing
• Fitting Position: Rear Axle Left, Rear Axle Right
• Weight [kg]: 2.366
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Observe service information:
• Name: SW 32 92 3320
• Manufacturer: SWAG

Supplementary Article/Info 2: with integrated magnetic sensor ring, Wheel Bearing integrated into wheel hub, with ABS sensor ring General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle Left, Front Axle Right
• Construction Year from: 06.2005
• Block Separation:
• Vehicle Identification Number (VIN) from: 1K-6-000001
• Thread Size: M14X1,5
• Number of Teeth, ABS ring: 86
• for OE number: 1K0407621D
• Outer Diameter [mm]: 136.5
• Rim Hole Number: 5
• Supplementary Article/Info 2: with integrated ABS sensor
• Number of Teeth: 36
• Manufacturer: GSP

• Fitting Position: Rear Axle
• Required quantity: 2
• for PR number: 0FG, 1KD
• Width [mm]: 69
• Inner Diameter [mm]: 32
• Flange Diameter [mm]: 136.9
• Rim Hole Number: 5
• Supplementary Article/Info 2: with integrated ABS sensor
• Manufacturer: SKF
• Name: SK VKBA3644

• Fitting Position: Front Axle Left, Front Axle Right
• Construction Year from: 06.2005
• Thread Size: M14X1,5
• Number of Teeth, ABS ring: 86
• for OE number: 1K0407621D
• Outer Diameter [mm]: 136.5
• Rim Hole Number: 5
• Supplementary Article/Info 2: with bolts/screws, with integrated ABS sensor
• Number of Teeth: 36
• Manufacturer: GSP
• Additional information: 9336004K
• Lisainfo: 9336004K

• Outer Diameter [mm]: 136
• Inner Diameter [mm]: 32
• Fitting Position: Rear Axle Left, Rear Axle Right
• Manufacturer: AIC

Supplementary Article/Info 2: with integrated magnetic sensor ring, with screw, with grease cap, with wheel hub General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Front Axle
• Outer Diameter [mm]: 136.4
• Width 2 [mm]: 48.1
• Outer Diameter 1 [mm]: 80
• Outer Diameter 2 [mm]: 65
• Number of mounting bores: 3
• Manufacturer: JPN

• Fitting Position: Rear
• General Information: wheelhub with bearing; rear
• Manufacturer: BORSEHUNG

• Fitting Position: Front Axle
• for PR number: 1LJ, 1LK, 1ZD, 1ZE, 1ZM, 1ZP
• Rim Hole Number: 5
• Flange Diameter [mm]: 137
• Supplementary Article/Info 2: with integrated ABS sensor
• Quality class: PJ
• Name: Wheel hub

• Quantity: 2
• Fitting Position: Rear Axle
• General Information: wheel hub with bearing; rear; with dust cover
• Manufacturer: BORSEHUNG

• Fitting Position: Front
• Manufacturer: VIKA

General Information: wheel hub with bearing; front; 4 holes; with screws

• Fitting Position: Rear Axle
• Required quantity: 2
• for PR number: 0FA, 0FC, 0FG, 0FV, 1KD, 1KE, 1KV, 1KY, 1KZ
• Weight [kg]: 2.258
• Packaging length [cm]: 15.6
• Packaging width [cm]: 15.4
• Packaging height [cm]: 10.5
• Supplementary Article/Info 2: with integrated ABS sensor
• Outer Diameter [mm]: 136.5
• Inner Diameter [mm]: 30
• Width [mm]: 68
• Rim Hole Number: 5
• Manufacturer: CONTITECH-LOÅ»YSKA KÓŁ

• Fitting Position: Rear Axle
• Supplementary Article/Info 2: with integrated ABS sensor
• Weight [kg]: 2
• Width [mm]: 70
• Inner Diameter [mm]: 32
• Outer Diameter [mm]: 136
• Rim Hole Number: 5
• Manufacturer: IJS GROUP

• Vehicle Identification Number (VIN): [8P-4-162 001;]
• Inner Diameter 1 [mm]: 30
• Number of Holes: 5
• Supplementary Article/Info 2: with rubber mount
• Number of pins: 43
• Rotation angle [°]: 180
• Tightening Torque [Nm]: 180
• Fitting Position: Rear Axle Right, Rear Axle Left
• Manufacturer: SNR
• Name: SN R154.55

• Fitting Position: Rear Axle
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Outer Diameter [mm]: 136.5
• Inner Diameter [mm]: 30
• Width [mm]: 67.8
• SVHC: No SVHC present!
• Manufacturer: FAG
• Name: LU 713610960

• Fitting Position: Rear Axle
• Required quantity: 2
• for PR number: 0FC, 1KY, 1KV, 1KE, 1KZ, 0FA, 0FG, 0FV, 1KD
• Width [mm]: 68
• Inner Diameter [mm]: 30
• Flange Diameter [mm]: 136.5
• Rim Hole Number: 5
• Supplementary Article/Info 2: with integrated ABS sensor
• Manufacturer: SKF
• Name: SK VKBA3656
• Lisainfo: VKBA 3656 SKF
• Additional information: VKBA 3656 SKF

• Quantity: 2
• Vehicle Identification Number (VIN) from: 1K-6-500 001
• Vehicle Identification Number (VIN) to: 1K-5-600 000
• Fitting Position: Front Axle
• Number of Holes: 4
• General Information: wheel hub with bearing; 4holes
• Manufacturer: VIKA

• Engine Code: AXW, BLR, BLY, BLX, BVY, BVX, BVZ
• for PR number: 1ZF
• Block Separation:
• Number of mounting bores: 3
• Width [mm]: 85
• Inner Diameter [mm]: 27
• Outer Diameter [mm]: 136
• Bolt Hole Circle Ø [mm]: 112
• Number of Holes: 5
• Bearing Type: Angular Ball Bearing
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.365
• for OE number: 1K0 407 621 E SK
• Manufacturer: FEBI BILSTEIN

Vehicle Identification Number (VIN) from: ******1K*5B162041, ******1K*5P027668, ******1K*5P108282, ******1K*5W572545 Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.