• Fitting Position: Front Axle, inner, Front, Lower
• Hulgaühik: Tükk
• Laagritüüp: Kummi-metalllaager
• Netokaal [kg]: 0,13
• Name: Puks - K„„ndmik VW P. GOLF/PAS
• Manufacturer: NK

• Installatsiooni pool: esisild alla, taga
• Manufacturer: JP GROUP
• Lisainfo: Rubber mount for wishbone, front, rear
• Additional information: Rubber mount for wishbone, front, rear

• Fitting Position: Front Axle
• Siseläbimõõt [mm]: 16
• Välisläbimõõt [mm]: 17
• Pikkus (mm): 50
• Manufacturer: DELLO AUTOMEGA

• Pikkus (mm): 50
• Jämedus/Tugevus (mm): 0,5
• Siseläbimõõt [mm]: 16
• Välisläbimõõt [mm]: 17
• Installatsiooni pool: Esisild
• Kaal (kg): 0,01
• Name: Puks - K„„ndmik VW USTALAJ¤CA
• Manufacturer: FEB

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Required quantity: 2
• Quantity per packing unit: 100
• Fitting Position: Front Axle
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Quantity per packing unit: 5
• Installatsiooni pool: esisild mõlemapoolselt
• Manufacturer: TOPRAN

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Siseläbimõõt [mm]: 16
• Välisläbimõõt [mm]: 17
• Installatsiooni pool: paremal, Esisild, vasakul
• Pikkus (mm): 50
• SVHC: SVHS aineid ei esine
• Manufacturer: FAG

• Installatsiooni pool: esisild paremal, esisild vasakul
• Pikkus (mm): 50
• Siseläbimõõt [mm]: 16
• Välisläbimõõt [mm]: 17
• Materjal: Metall
• vajaminev tükihulk: 2
• Name: Puks - K„„ndmik VW P. USTALAJ¤CA
• Manufacturer: MEY

• Fitting Position: Front Axle Left, Front Axle Right, Front, Lower
• Material: Rubber/Metal
• Thickness [mm]: 54
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 33, 36
• Manufacturer: MERTZ

• Length [mm]: 54
• Fitting Position: Lower Front Axle, Front
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 33
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Front, Front Axle
• Laagritüüp: Kummi-metalllaager
• Roolimisliik: õõtshoova jaoks
• Siseläbimõõt [mm]: 12
• Välisläbimõõt [mm]: 33
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: Lower, Lower Front Axle
• OE-numbri jaoks: 191 407 182
• Manufacturer: GSP

• Välisläbimõõt [mm]: 33,1
• vajaminev tükihulk: 2
• Kaal (kg): 0,11
• Siseläbimõõt [mm]: 12
• Installatsiooni pool: esisild alla, kahepoolne, ees
• Manufacturer: TEDGUM

• Fitting Position: Front, Right, Left
• Installatsiooni pool: Esisild, all
• Roolimisliik: õõtshoova jaoks
• Kaal (kg): 0,11
• Manufacturer: CORTECO

• Installatsiooni pool: Esisild, kahepoolne, ees
• Roolimisliik: õõtshoova jaoks
• Laagritüüp: Kummi-metalllaager
• Name: Puks - K„„ndmik VW P. GOLF/PAS
• Manufacturer: MAX

• Fitting Position: Front Axle, Lower, Front
• Siseläbimõõt 1 [mm]: 12
• Välisläbimõõt 1 [mm]: 33
• Jämedus/Tugevus 1 (mm): 54
• Manufacturer: DELPHI

• Fitting Position: Lower, Front Axle Left, Front Axle Right
• Material: Steel, Rubber/Metal
• Thickness [mm]: 54
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 36, 33
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: SRL
VW POLO/GOLF/S.IBIZA
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
VW POLO/GOLF/S.IBIZA
(kvaliteediklass: PJ)"

• Installatsiooni pool: Esisild, ees, all
• Siseläbimõõt [mm]: 12
• Välisläbimõõt [mm]: 33
• OE-numbri jaoks: 357407182
• Manufacturer: SASIC

• Jämedus/Tugevus (mm): 54
• Siseläbimõõt [mm]: 12
• Välisläbimõõt [mm]: 33, 36
• Materjal: Kumm/metall
• Installatsiooni pool: esisild vasakul, ees, esisild paremal
• Kaal (kg): 0,1
• Name: Puks - K„„ndmik VW P. GOLF/PAS
• Manufacturer: FEB

Tehniline informatsioon: Please tighten the mounting bolts with the wheels on the ground. Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear, Lower, Front Axle both sides
• Required quantity: 2
• Supplementary Article/Info 2: without holding frame
• paaris tootenumbrid: VKDS 331062
• Manufacturer: SKF ZAWIESZENIE

• Quantity per packing unit: 4
• Fitting Position: Lower Front Axle
• Length [mm]: 54
• Weight [kg]: 0.105
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 33
• Mounting Type: Rubber-Metal Mount
• Weight [g]: 105
• Manufacturer: METALCAUCHO

• OE-numbri jaoks: 191407182
• Installatsiooni pool: all, ees, Esisild
• vajaminev tükihulk: 2
• Materjal: Metall
• Kaal (g): 112
• Siseläbimõõt [mm]: 12
• Välisläbimõõt [mm]: 33
• Pikkus (mm): 54
• Name: IM 32200
• Manufacturer: ORIGINAL IMPERIUM

• Installatsiooni pool: esisild alla, ees
• Manufacturer: JP GROUP
• Lisainfo: Rubber mount for wishbone, front, front
• Additional information: Rubber mount for wishbone, front, front

• Jämedus/Tugevus (mm): 54
• Siseläbimõõt [mm]: 12
• Välisläbimõõt [mm]: 33, 36
• Materjal: Kumm/metall, Metall
• Installatsiooni pool: esisild vasakul, ees, esisild paremal
• Kaal (kg): 0,11
• Name: SW 30 69 0002
• Manufacturer: SWAG

Tehniline informatsioon: Please tighten the mounting bolts with the wheels on the ground. Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Laagritüüp: Kummi-metalllaager
• Roolimisliik: õõtshoova jaoks
• Installatsiooni pool: esisild vasakul, esisild paremal, all, ees, sees
• Pikkus (mm): 54
• Siseläbimõõt [mm]: 12
• Hulk telje kohta: 2
• SVHC: Infot ei ole, palun pöörduge tootja poole!
• Manufacturer: TRW

• Installatsiooni pool: all, Esisild, kahepoolne, ees
• Välisläbimõõt 1 [mm]: 33
• Välisläbimõõt 2 [mm]: 36
• Kõrgus (mm): 54
• Manufacturer: KAMOKA

• Mounting Type: Rubber-Metal Mount
• Fitting Position: mounting
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
VW POLO/GOLF/S.IBIZA
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
VW POLO/GOLF/S.IBIZA
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle, Lower, Front
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 33
• Height [mm]: 54
• Name: ALT 80941AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: Lower Front Axle, Rear
• Laagritüüp: Kummi-metalllaager
• Roolimisliik: õõtshoova jaoks
• SVHC: SVHS aineid ei esine
• Name: Puks
• Manufacturer: FAG

• Fitting Position: Front Axle Left, Front Axle Right, Rear, Lower
• Material: Rubber/Metal
• Thickness [mm]: 41
• Inner Diameter [mm]: 17
• Outer Diameter [mm]: 60, 69
• Supplementary Article/Info 2: with mounting sleeve
• Manufacturer: MERTZ

• Fitting Position: Front Axle, Front
• Laagritüüp: Kummi-metalllaager
• Roolimisliik: õõtshoova jaoks
• Siseläbimõõt [mm]: 12
• Välisläbimõõt [mm]: 32,5
• Laius (mm): 55
• SVHC: SVHS aineid ei esine
• Name: Puks
• Manufacturer: FAG

• Fitting Position: Front Axle both sides, Front
• Required quantity: 2
• paaris tootenumbrid: VKDS 331002
• Manufacturer: SKF
• Name: SK VKDS331002

• Vehicle Identification Number (VIN) from: 19-E-300 001
• Fitting Position: Front Axle, Rear
• Vehicle Identification Number (VIN) to: 1G-N-300 000
• Laagritüüp: Kummi-metalllaager
• Roolimisliik: õõtshoova jaoks
• Manufacturer: DELLO AUTOMEGA

• Siseläbimõõt [mm]: 12,1
• Välisläbimõõt [mm]: 32,4
• Pikkus (mm): 54
• paaris tootenumbrid: 270315
• Kaal (kg): 0,09
• Montaažiinfo: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

Fitting Position: in front of axle, Front Axle Left, Front Axle Right, inner, Lower

• Installatsiooni pool: ees, all, esisild vasakul, esisild paremal
• Kõrgus (mm): 54
• Siseläbimõõt [mm]: 12
• Välisläbimõõt [mm]: 33
• Piirangutega toode/piirangu info: ilma kinnituseta
• vajaminev tükihulk: 2
• soovitatav vahetada paarikaupa:
• Name: Puks - K„„ndmik VW P. GOLF 84-/PASSAT 88-97
• Manufacturer: MEY

• Fitting Position: Lower Front Axle, Rear
• Laagritüüp: Kummi-metalllaager
• Roolimisliik: õõtshoova jaoks
• Manufacturer: DELLO AUTOMEGA

• uus mudel:
• Jämedus/Tugevus (mm): 41
• Siseläbimõõt [mm]: 17
• Välisläbimõõt [mm]: 60, 27
• Materjal: Kumm/metall, Alumiinium
• Installatsiooni pool: esisild vasakul, all, taga, esisild paremal
• Kaal (kg): 0,142
• Piirangutega toode/piirangu info 2: koos paigaldushülsiga
• Name: Puks - K„„ndmik VW P. GOLF 2
• Manufacturer: FEB

Tehniline informatsioon: Please tighten the mounting bolts with the wheels on the ground. Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Installatsiooni pool: esisild vasakul, esisild paremal, taga, sees
• Roolimisliik: õõtshoova jaoks
• Laagritüüp: Kummi-metalllaager
• Versioon: B
• Hulk telje kohta: 2
• Välisläbimõõt [mm]: 60
• Siseläbimõõt [mm]: 17
• Laius (mm): 24
• OE-numbri jaoks: 191 407 181E
• soovitatav remondilaiendus, vaata lisavarustuse nimekirja:
• Manufacturer: TOPRAN

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Rear, Right, Left
• Installatsiooni pool: Esisild
• Roolimisliik: õõtshoova jaoks
• Siseläbimõõt [mm]: 17
• Kogupikkus [mm]: 41
• Välisläbimõõt [mm]: 60
• Kaal (kg): 0,16
• Manufacturer: CORTECO

• Quantity per packing unit: 4
• Roolimisliik: õõtshoova jaoks
• Laagritüüp: Kummi-metalllaager
• Installatsiooni pool: kahepoolne, taga, esisild alla
• Sillamõõtmine pärast paigaldust vajalik:
• paaris tootenumbrid: V10-1382
• Kaal (kg): 0,171
• Manufacturer: VAICO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Installatsiooni pool: esisild alla, taga
• Siseläbimõõt [mm]: 12
• Lisainfo: Rubber mount for wishbone, ®12 mm inner tube
• Additional information: Rubber mount for wishbone, ®12 mm inner tube

• uus mudel:
• Jämedus/Tugevus (mm): 41
• Siseläbimõõt [mm]: 17
• Välisläbimõõt [mm]: 60, 27
• Materjal: Kumm/metall, Alumiinium
• Installatsiooni pool: esisild vasakul, all, taga, esisild paremal
• Kaal (kg): 0,6
• Piirangutega toode/piirangu info 2: koos paigaldushülsiga
• Name: SW 30 75 0002
• Manufacturer: SWAG

Tehniline informatsioon: Please tighten the mounting bolts with the wheels on the ground. Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• vajaminev tükihulk: 2
• Kaal (kg): 0,217
• Installatsiooni pool: esisild alla, taga, kahepoolne
• Välisläbimõõt [mm]: 60
• Siseläbimõõt [mm]: 17
• Name: Puks - K„„ndmik VW P. GOLF/POLO/PA
• Manufacturer: TED

• vana mudel:
• Jämedus/Tugevus (mm): 41
• Siseläbimõõt [mm]: 17
• Materjal: Kumm/metall
• Installatsiooni pool: esisild vasakul, all, taga, esisild paremal
• Välisläbimõõt 1 [mm]: 60
• Välisläbimõõt 2 [mm]: 69
• Kaal (kg): 0,202
• Hooldusinfot jälgida:
• Name: Puks - K„„ndmik VW P. GOLF 2 TY (Z KONIERZEM)
• Manufacturer: FEB

Tehniline informatsioon: Please tighten the mounting bolts with the wheels on the ground. Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• uus mudel:
• Jämedus/Tugevus (mm): 41
• Siseläbimõõt [mm]: 17
• Välisläbimõõt [mm]: 60, 27
• Materjal: Alumiinium, Kumm/metall
• Installatsiooni pool: esisild vasakul, all, taga, esisild paremal
• Kaal (kg): 0,141
• Hooldusinfot jälgida:
• Name: Puks - K„„ndmik VW P. GOLF/PAS
• Manufacturer: FEB

Tehniline informatsioon: Please tighten the mounting bolts with the wheels on the ground. Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Installatsiooni pool: esisild alla, taga
• Siseläbimõõt [mm]: 17
• Lisainfo: Rubber mount for wishbone, front ®17 mm inner tube
• Additional information: Rubber mount for wishbone, front ®17 mm inner tube

• Installatsiooni pool: esisild vasakul, esisild paremal, taga, sees
• Roolimisliik: õõtshoova jaoks
• Laagritüüp: Kummi-metalllaager
• Versioon: A
• Hulk telje kohta: 2
• Välisläbimõõt [mm]: 60
• Siseläbimõõt [mm]: 17
• Laius (mm): 24
• OE-numbri jaoks: 191 407 181B
• soovitatav remondilaiendus, vaata lisavarustuse nimekirja:
• Manufacturer: TOPRAN

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• vana mudel:
• Jämedus/Tugevus (mm): 41
• Siseläbimõõt [mm]: 17
• Välisläbimõõt [mm]: 69, 60
• Materjal: Kumm/metall
• Installatsiooni pool: all, esisild vasakul, taga, esisild paremal
• Kaal (kg): 0,198
• Piirangutega toode/piirangu info 2: koos paigaldushülsiga
• Manufacturer: FEB

Tehniline informatsioon: Please tighten the mounting bolts with the wheels on the ground. Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Puks - K„„ndmik VW P. GOLF 2 Z KONIERZEM KPL Z TULEJK¤ USTALAJ¤C¤

• Installatsiooni pool: taga, all, Esisild, kahepoolne
• Kõrgus 1 (mm): 26
• Kõrgus 2 (mm): 41
• Siseläbimõõt [mm]: 17
• Piirangutega toode/piirangu info 2: ilma juhthülsita
• Välisläbimõõt 1 [mm]: 60
• Välisläbimõõt 2 [mm]: 68
• Manufacturer: OPTIMAL ZAWIESZENIE

• Installatsiooni pool: Esisild, kahepoolne, ees
• Roolimisliik: õõtshoova jaoks
• Laagritüüp: Kummi-metalllaager
• Hulk telje kohta: 2
• soovitava lisavarustuse artiklinumber: 44090 01, 44091 01
• Hooldusinfot jälgida:
• Name: Puks - K„„ndmik VW P. GOLF/PASSAT
• Manufacturer: LMI

• vana mudel:
• Jämedus/Tugevus (mm): 41
• Siseläbimõõt [mm]: 17
• Materjal: Kumm/metall
• Installatsiooni pool: esisild vasakul, all, taga, esisild paremal
• Välisläbimõõt 1 [mm]: 60
• Välisläbimõõt 2 [mm]: 69
• Kaal (kg): 0,203
• Name: SW 30 69 0003
• Manufacturer: SWAG

Tehniline informatsioon: Please tighten the mounting bolts with the wheels on the ground. Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• uus mudel:
• Jämedus/Tugevus (mm): 41
• Siseläbimõõt [mm]: 17
• Välisläbimõõt [mm]: 60, 27
• Materjal: Alumiinium, Kumm/metall
• Installatsiooni pool: esisild vasakul, all, taga, esisild paremal
• Kaal (kg): 0,203
• Name: SW 30 69 0001
• Manufacturer: SWAG

Tehniline informatsioon: Please tighten the mounting bolts with the wheels on the ground. Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• vana mudel:
• Jämedus/Tugevus (mm): 41
• Siseläbimõõt [mm]: 17
• Välisläbimõõt [mm]: 69, 60
• Materjal: Kumm/metall
• Installatsiooni pool: all, esisild vasakul, taga, esisild paremal
• Kaal (kg): 0,6
• Piirangutega toode/piirangu info 2: koos paigaldushülsiga
• Name: SW 30 75 0001
• Manufacturer: SWAG

Tehniline informatsioon: Please tighten the mounting bolts with the wheels on the ground. Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle, outer
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Weight [kg]: 0.13
• Name: DY 37-06015-6
• Manufacturer: DYS

• Materjal: Alumiinium, Kumm/metall
• Installatsiooni pool: Esisild, all, taga
• Hooldusinfot jälgida:
• Välisläbimõõt [mm]: 60, 27
• Jämedus/Tugevus (mm): 41
• Siseläbimõõt [mm]: 17
• Name: Puks - K„„ndmik VW P. GOLF/PAS
• Manufacturer: MAX

• Materjal: Kumm/metall
• Installatsiooni pool: Esisild, all, taga
• Hooldusinfot jälgida:
• Välisläbimõõt [mm]: 69, 60
• Jämedus/Tugevus (mm): 41
• Siseläbimõõt [mm]: 17
• Name: Puks - K„„ndmik VW P. GOLF 2
• Manufacturer: MAX

• Quantity per packing unit: 4
• Fitting Position: Lower Front Axle
• Thickness [mm]: 41
• Weight [kg]: 0.155
• Required quantity: 2
• Material: Aluminium, Rubber/Metal
• Inner Diameter [mm]: 17
• Outer Diameter [mm]: 27, 60
• Mounting Type: Rubber-Metal Mount
• Weight [g]: 155
• Observe service information:
• Manufacturer: METALCAUCHO

• Fitting Position: Front Axle, inner, Rear, Lower
• Hulgaühik: Tükk
• Materjal: Kumm/metall
• Laagritüüp: Kummi-metalllaager
• Netokaal [kg]: 0,17
• Manufacturer: NK

Name: Puks - K„„ndmik VW P. GOLF/PAS !!!Z TULEJ¤ USTALAJ¤C¤!!!

• Fitting Position: Lower, Front Axle Left, Front Axle Right
• Material: Aluminium
• Thickness [mm]: 41
• Inner Diameter [mm]: 17
• Outer Diameter [mm]: 60, 27
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: SRL
VW POLO/GOLF/S.IBIZA
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
VW POLO/GOLF/S.IBIZA
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle, Rear, Lower
• Siseläbimõõt 1 [mm]: 17
• Välisläbimõõt 1 [mm]: 61
• Jämedus/Tugevus 1 (mm): 41
• Name: DE TD243W
• Manufacturer: DELPHI

• Mounting Type: Rubber-Metal Mount
• Fitting Position: mounting
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
SEAT IBIZA/CORD.
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
SEAT IBIZA/CORD.
(kvaliteediklass: PJ)"

• Siseläbimõõt [mm]: 17
• Välisläbimõõt [mm]: 60,1
• Pikkus (mm): 41
• paaris tootenumbrid: 270314
• Kaal (kg): 0,14
• Montaažiinfo: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

Fitting Position: behind the axle, Front Axle Left, Front Axle Right, inner, Lower

• Installatsiooni pool: esisild alla
• OE-numbri jaoks: 357 407 181
• Manufacturer: GSP ZAWIESZENIE

• vajaminev tükihulk: 2
• Siseläbimõõt [mm]: 16
• Installatsiooni pool: taga, esisild alla
• tugevdatud variant:
• Kaal (kg): 0,25
• Välisläbimõõt [mm]: 60,2
• Manufacturer: TEDGUM_TD

• Installatsiooni pool: taga, all, esisild vasakul, esisild paremal
• Kõrgus (mm): 41
• Siseläbimõõt [mm]: 17
• Välisläbimõõt [mm]: 60
• Materjal: Alumiinium
• Piirangutega toode/piirangu info: ilma kinnituseta
• vajaminev tükihulk: 2
• soovitatav vahetada paarikaupa:
• Name: Puks - K„„ndmik VW P. GOLF/PAS
• Manufacturer: MEY

• Fitting Position: Front Axle, Lower, Rear
• Inner Diameter [mm]: 17
• Outer Diameter [mm]: 60
• Height [mm]: 41
• Name: ALT 80968AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: Lower Front Axle, Rear, both sides
• Laagritüüp: Kummi-metalllaager
• Roolimisliik: Õõtshoob
• Pikkus (mm): 41
• Välisläbimõõt [mm]: 60
• Siseläbimõõt [mm]: 17
• Hulk telje kohta: 2
• SVHC: Infot ei ole, palun pöörduge tootja poole!
• Manufacturer: TRW

• Installatsiooni pool: Esisild, kahepoolne, taga
• Roolimisliik: õõtshoova jaoks
• Hulk telje kohta: 2
• Name: Puks - K„„ndmik VW P. GOLF/PASSAT
• Manufacturer: LMI

• Fitting Position: Front Axle both sides, Lower
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Inner Diameter [mm]: 17
• Outer Diameter [mm]: 60
• Length [mm]: 41
• Weight [kg]: 0.15
• Manufacturer: RTS

• Mounting Type: Rubber-Metal Mount
• Fitting Position: mounting
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
VW POLO/GOLF/S.IBIZA
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
VW POLO/GOLF/S.IBIZA
(kvaliteediklass: PJ)"

• Installatsiooni pool: taga, all, esisild vasakul, esisild paremal
• Kõrgus (mm): 41
• Siseläbimõõt [mm]: 17
• Välisläbimõõt [mm]: 60
• Piirangutega toode/piirangu info: ilma kinnituseta
• vajaminev tükihulk: 2
• soovitatav vahetada paarikaupa:
• Name: Puks - K„„ndmik VW P. GOLF 2 TY (Z KONIERZEM)
• Manufacturer: MEY

• Mounting Type: Rubber-Metal Mount
• Fitting Position: mounting
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
VW POLO/GOLF/S.IBIZA
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
VW POLO/GOLF/S.IBIZA
(kvaliteediklass: PJ)"

• Installatsiooni pool: all, Esisild, kahepoolne, taga
• Välisläbimõõt [mm]: 60
• Kõrgus 1 (mm): 25
• Kõrgus 2 (mm): 41
• Manufacturer: KAMOKA

• Mounting Type: Rubber-Metal Mount
• Fitting Position: mounting
• Quality class: PJ
• Name: Control arm bush - kit left=right

• Quantity per packing unit: 10
• Roolimisliik: õõtshoova jaoks
• Installatsiooni pool: taga, Esisild
• Sillamõõtmine pärast paigaldust vajalik:
• Laagritüüp: Kummi-metalllaager
• Kaal (kg): 0,265
• Manufacturer: VAICO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Installatsiooni pool: esisild paremal, esisild vasakul, all, taga
• Kõrgus (mm): 41
• Siseläbimõõt [mm]: 17
• Välisläbimõõt [mm]: 60
• Materjal: Alumiinium
• Piirangutega toode/piirangu info: ilma kinnituseta
• Hulgaühik: Komplekt
• vajaminev tükihulk: 2
• soovitatav vahetada paarikaupa:
• Name: Puks - K„„ndmik VW P. GOLF 2
• Manufacturer: MEY