• Fitting Position: Front Axle
• Brake Caliper Type: Floating Caliper
• Manufacturer Restriction: KELSEY HAYES
• Netokaal [kg]: 0,01
• Name: LISAKOMPLEKT, KETASPIDURIKLOTSID
• Manufacturer: NK

Lisainfo: QB11667K

• Fitting Position: Front Axle
• Brake System: Kelsey Hayes
• Name: LISAKOMPLEKT, KETASPIDURIKLOTSID
• Manufacturer: QBK

• Fitting Position: Front Axle
• Pidurisüsteem: KELSEY HAYES
• Kaal (kg): 0,03
• Manufacturer: A.B.S.

• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Pikkus (mm): 16
• Keermemõõt: M6x1
• Pöördeliik: koos väliskeermega
• Võtmekaugus: Torx-30
• Name: Kruvi,piduriketas
• Manufacturer: QBK
• Lisainfo: M6x1 16,0mm Torx-30 2tk
• Additional information: M6x1 16,0mm Torx-30 2tk

• Fitting Position: Front Axle
• Pidurisüsteem: KELSEY-HAYES
• Manufacturer: AUTOFREN SEINSA

• Installatsiooni pool: Tagasild
• Pidurisüsteem: ATE
• Name: LISAKOMPLEKT,PIDURISADUL
• Manufacturer: MAX
• Lisainfo: 27-0553
• Additional information: 27-0553

• Brake System: KelseyHayes
• Installatsiooni pool: Esisild
• Name: Lisakomplekt, ketaspiduriklotsid
• Manufacturer: MAX

• Fitting Position: Front Axle
• Brake System: Kelsey Hayes
• Quantity per packing unit: 4
• Name: LISAKOMPLEKT, KETASPIDURIKLOTSID
• Manufacturer: DLP

Lisainfo: "Tootja: DELPHI
SEAT/VW
(kvaliteediklass: PJ)"

• Installatsiooni pool: Esisild
• Pidurisüsteem: Kelsey-Hayes
• Kaal (kg): 0,016
• Manufacturer: TOMEX BRAKES

• Installatsiooni pool: Esisild
• Pidurisüsteem: KELSEY HAYES
• Manufacturer: PROFIPOWER

• Fitting Position: Front Axle
• Transmission Type: Fully Automatic
• Tootja piirang: VAG
• SVHC: Infot ei ole, palun pöörduge tootja poole!
• Manufacturer: TRW
• Quality class: Q
• Name: Brake pads fitting kit

• Fitting Position: Front Axle
• Brake System: Kelsey Hayes
• Quality class: PJ
• Name: Brake pads fitting kit

• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Pikkus (mm): 16,1
• Keermemõõt: M6x1
• Materjal: Metall
• Pealispind: Kroom-(VI)-vaba passiveerimine
• Kruvipea-/Mutriprofiil: sise-Torx
• ka universaaltootena saadav vaata toode-nr.: TPM1000
• Kaal (kg): 0,003
• Name: Kruvi,piduriketas
• Manufacturer: TEX

• Construction Year to: 07.1988
• Fitting Position: Front Axle
• Manufacturer Restriction: Kelsey-Hayes System
• Manufacturer: BOSCH

• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Keermemõõt: M6 x 1 x 16 mm
• vajaminev tükihulk: 2
• Manufacturer: METZGER

• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Pikkus (mm): 16
• Keermemõõt: M6x1
• Pöördeliik: koos väliskeermega
• Võtmekaugus: Torx-30
• Name: Kruvi,piduriketas
• Manufacturer: TRI

• Construction Year from: 08.1987
• Installatsiooni pool: esisild vasakul
• Välisläbimõõt [mm]: 260
• Siseläbimõõt [mm]: 105
• pidurikettaläbimõõdule (mm): 239
• Pidurisüsteem: ATE/Girling
• Manufacturer: JP GROUP
• Lisainfo: Splash shield, front, left
• Additional information: Splash shield, front, left

• Construction Year from: 08.1987
• Installatsiooni pool: esisild paremal
• Välisläbimõõt [mm]: 260
• Siseläbimõõt [mm]: 105
• pidurikettaläbimõõdule (mm): 239
• Pidurisüsteem: ATE/Girling
• Manufacturer: JP GROUP
• Lisainfo: Splash shield, front, right
• Additional information: Splash shield, front, right

• Construction Year from: 08.1987
• Installatsiooni pool: esisild vasakul
• Siseläbimõõt [mm]: 105
• Välisläbimõõt [mm]: 260
• pidurikettaläbimõõdule (mm): 239
• paaris tootenumbrid: 131-07-126
• Materjal: Raudplekk
• Pealispind: tsingitud
• soovitava lisavarustuse artiklinumber: 231-03-047
• Manufacturer: ABAKUS DEPO/LORO

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Installatsiooni pool: esisild vasakul
• Seerianumber: HTO-VW-093
• Manufacturer: NTY

• Installatsiooni pool: esisild paremal
• Seerianumber: HTO-VW-094
• Manufacturer: NTY

• Installatsiooni pool: esisild vasakul
• Garantii: 3 aastat garantii
• paaris tootenumbrid: 57SKV106
• Kaal (kg): 0,22
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Name: CE 57SKV105
• Manufacturer: ESEN SKV

• Installatsiooni pool: Tagasild vasakul, Tagasild paremal
• Pikkus (mm): 1 220
• Piduri-/sõidudünaamika: Sõidukitele koos ABS-ga
• Piirangutega toode/piirangu info 2: koos kaabliga
• Seerianumber: HCA-VW-020

• Construction Year from: 08.1987
• Installatsiooni pool: esisild paremal
• Pidurisüsteem: ATE/Girling
• Manufacturer: YSPARTS

• Construction Year from: 08.1987
• Installatsiooni pool: esisild vasakul
• Pidurisüsteem: ATE/Girling
• Manufacturer: YSPARTS

• Construction Year from: 08.1987
• paaris tootenumbrid: 19-3451
• pidurikettaläbimõõdule (mm): 239
• Installatsiooni pool: esisild paremal
• Name: Plekk,piduriketas
• Manufacturer: MAX

• Construction Year from: 08.1987
• paaris tootenumbrid: 19-3452
• pidurikettaläbimõõdule (mm): 239
• Installatsiooni pool: esisild vasakul
• Name: Plekk,piduriketas
• Manufacturer: MAX

• for brake disc diameter [mm]: 239
• for brake disc thickness [mm]: 10, 12, 20
• Block Separation:
• Installatsiooni pool: esisild paremal
• Materjal: Raudplekk
• Pealispind: tsingitud
• paaris tootenumbrid: V10-3887
• Kaal (kg): 0,15
• Manufacturer: VAICO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front Axle Right
• Vehicle Identification Number (VIN) from: 19-E-300000
• Construction Year from: 03.1984
• Läbimõõt 1 (mm): 260
• Läbimõõt 2 (mm): 105
• Materjal: Raudplekk
• Pidurisüsteem: ATE/GIRLING
• pidurikettaläbimõõdule (mm): 239
• paaris tootenumbrid: 11000
• Kaal (kg): 0,15
• Manufacturer: A.B.S.

• Fitting Position: Front Axle Left
• Vehicle Identification Number (VIN) from: 19-E-300000
• Construction Year from: 03.1984
• Läbimõõt 1 (mm): 260
• Läbimõõt 2 (mm): 105
• Materjal: Raudplekk
• Pidurisüsteem: ATE/GIRLING
• pidurikettaläbimõõdule (mm): 239
• paaris tootenumbrid: 11001
• Kaal (kg): 0,15
• Manufacturer: A.B.S.

• for brake disc diameter [mm]: 239
• for brake disc thickness [mm]: 10, 12, 20
• Block Separation:
• Installatsiooni pool: esisild vasakul
• Pealispind: tsingitud
• Materjal: Raudplekk
• paaris tootenumbrid: V10-3888
• Kaal (kg): 0,15
• Manufacturer: VAICO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• for brake disc diameter [mm]: 239
• for brake disc thickness [mm]: 10, 12, 20
• Block Separation:
• Installatsiooni pool: esisild vasakul
• paaris tootenumbrid: 6115214
• Materjal: Raudplekk
• Pealispind: KTL-kattega (katoodne sukelduskatmine)
• Manufacturer: METZGER

• for brake disc diameter [mm]: 239
• for brake disc thickness [mm]: 10, 12, 20
• Block Separation:
• Installatsiooni pool: esisild paremal
• paaris tootenumbrid: 6115213
• Materjal: Raudplekk
• Pealispind: KTL-kattega (katoodne sukelduskatmine)
• Manufacturer: METZGER

• Installatsiooni pool: esisild vasakul, esisild paremal
• Seerianumber: HCA-VW-019
• Manufacturer: NTY

• Installatsiooni pool: Esisild
• Materjal: Raudplekk
• Pealispind: tsingitud
• Kaal (kg): 0,15
• Manufacturer: VAICO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year from: 08.1987
• paaris tootenumbrid: 234707
• pidurikettaläbimõõdule (mm): 239
• Läbimõõt 1/Läbimõõt 2 (mm): 260/105
• Installatsiooni pool: esisild paremal
• Netokaal [kg]: 0,2
• Name: PLEKK,PIDURIKETAS
• Manufacturer: NK
• Additional information: 234708
• Lisainfo: 234708

• Construction Year from: 08.1987
• paaris tootenumbrid: 234708
• pidurikettaläbimõõdule (mm): 239
• Läbimõõt 1/Läbimõõt 2 (mm): 260/105
• Installatsiooni pool: esisild vasakul
• Netokaal [kg]: 0,2
• Name: PLEKK,PIDURIKETAS
• Manufacturer: NK
• Additional information: 234707
• Lisainfo: 234707

• Construction Year to: 08.1987
• Installatsiooni pool: Tagasild vasakul
• pidurikettaläbimõõdule (mm): 226
• Manufacturer: YSPARTS

• Construction Year to: 08.1987
• Installatsiooni pool: Tagasild paremal
• pidurikettaläbimõõdule (mm): 226
• Manufacturer: YSPARTS

• Fitting Position: Rear Axle Right
• Construction Year from: 08.1987
• Materjal: Raudplekk
• pidurikettaläbimõõdule (mm): 226
• paaris tootenumbrid: 11012
• Kaal (kg): 0,4
• Manufacturer: A.B.S.

• Fitting Position: Rear Axle Left
• Construction Year from: 08.1987
• Materjal: Raudplekk
• pidurikettaläbimõõdule (mm): 226
• paaris tootenumbrid: 11013
• Kaal (kg): 0,4
• Manufacturer: A.B.S.

• Fitting Position: Rear Axle Right
• Construction Year to: 08.1987
• Materjal: Raudplekk
• pidurikettaläbimõõdule (mm): 226
• paaris tootenumbrid: 11014
• Kaal (kg): 0,3
• Manufacturer: A.B.S.

• Fitting Position: Rear Axle Left
• Construction Year to: 08.1987
• Materjal: Raudplekk
• pidurikettaläbimõõdule (mm): 226
• paaris tootenumbrid: 11015
• Kaal (kg): 0,3
• Manufacturer: A.B.S.

• Installatsiooni pool: Tagasild paremal
• pidurikettaläbimõõdule (mm): 226
• Garantii: 3 aastat garantii
• paaris tootenumbrid: 57SKV607
• Kaal (kg): 0,35
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: ESEN SKV

• Construction Year to: 08.1987
• Installatsiooni pool: Tagasild vasakul
• Pealispind: tsingitud
• Materjal: Raudplekk
• Kaal (kg): 0,318
• Manufacturer: VAICO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year to: 08.1987
• Installatsiooni pool: Tagasild paremal
• Materjal: Raudplekk
• Pealispind: tsingitud
• Manufacturer: VAICO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front Axle Left, Front Axle Right
• Vehicle Identification Number (VIN) to: 19-E-200000
• Construction Year to: 02.1984
• Läbimõõt 1 (mm): 273
• Läbimõõt 2 (mm): 82
• Kaal (kg): 0,31
• Materjal: Raudplekk
• Manufacturer: A.B.S.

• Installatsiooni pool: esisild vasakul, esisild paremal
• Läbimõõt 1/Läbimõõt 2 (mm): 140 / 285
• Manufacturer: AIC

Pealispind: fosfeeritud, värvitud, KTL-kattega (katoodne sukelduskatmine) Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Construction Year from: 08.1987
• Installatsiooni pool: Tagasild paremal
• pidurikettaläbimõõdule (mm): 226
• paaris tootenumbrid: 131-07-649
• Värv: must
• Materjal: Raudplekk
• Pealispind: KTL-kattega (katoodne sukelduskatmine)
• Manufacturer: ABAKUS

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Construction Year from: 08.1987
• Installatsiooni pool: Tagasild vasakul
• pidurikettaläbimõõdule (mm): 226
• paaris tootenumbrid: 131-07-650
• Värv: must
• Materjal: Raudplekk
• Pealispind: KTL-kattega (katoodne sukelduskatmine)
• Manufacturer: ABAKUS

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Installatsiooni pool: Tagasild
• Pikkus (mm): 1 120
• Pistikkontaktide arv: 2
• Pistikute teostus: Female
• Pistikukatte kuju: ümar
• Garantii: 3 aastat garantii
• Pinge [V]: 12
• Kaal (kg): 0,14
• Värv: must
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY

• Construction Year from: 08.1990
• Vehicle Identification Number (VIN) from: 1G-M-*01->1G-N-30*
• Installatsiooni pool: Tagasild
• Anduritüüp: passiivne andur
• Kaablipikkus (mm): 1 220
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: MAX

• Fitting Position: Front Axle
• Construction Year from: 08.1986
• Kaablipikkus (mm): 1 075
• Anduritüüp: passiivne andur
• Installatsiooni sügavus (mm): 27,8
• Ühenduste arv: 2
• Manufacturer: ERA

• Construction Year from: 08.1986
• Installatsiooni pool: Esisild
• Anduritüüp: passiivne andur
• Kaablipikkus (mm): 1 140
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: MAX

• Installatsiooni pool: Tagasild vasakul
• paaris tootenumbrid: 57602
• Läbimõõt 1/Läbimõõt 2 (mm): 45 / 270
• Manufacturer: AIC

Pealispind: fosfeeritud, värvitud, KTL-kattega (katoodne sukelduskatmine) Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Installatsiooni pool: Tagasild paremal
• paaris tootenumbrid: 57601
• Läbimõõt 1/Läbimõõt 2 (mm): 45 / 270
• Manufacturer: AIC

Pealispind: fosfeeritud, KTL-kattega (katoodne sukelduskatmine), värvitud Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Rear Axle
• Construction Year from: 08.1990
• Vehicle Identification Number (VIN) from: 1G-M-*01 -> 1G-N-30*
• Anduritüüp: passiivne andur
• kasutatud klemmide arv: 2
• Kaablipikkus (mm): 1 225
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: DLP

• Model Year from: 1987
• Anduritüüp: passiivne andur
• Kaablipikkus (mm): 1 080
• Piduri-/sõidudünaamika: Sõidukitele koos ABS-ga
• Pistikkontaktide arv: 2
• Installatsiooni pool: Esisild
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: MEY

• Fitting Position: Rear Axle
• Kaablipikkus (mm): 1 220
• Installatsiooni sügavus (mm): 33,7
• Pistikkontaktide arv: 2
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: TRI

• Fitting Position: Front Axle
• Construction Year from: 08.1986
• Anduritüüp: passiivne andur
• kasutatud klemmide arv: 2
• Kaablipikkus (mm): 1 140
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE SS20178