• Material: Plastic
• Manufacturer: JP GROUP A/S
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

• Thickness [mm]: 3.5
• Inner Diameter [mm]: 19.5
• Material: NBR (nitrile butadiene rubber)
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

• Quantity per packing unit: 100
• Manufacturer: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Material: Plastic
• for OE number: 032121142
• Manufacturer: DELLO AUTOMEGA

• Quantity: 1
• Kaal (kg): 0,015
• Materjal: Plastik
• vajaminev tükihulk: 1
• Üldine informatsioon: retaining spring
• Manufacturer: VIKA

• Thickness [mm]: 3.5
• Inner Diameter [mm]: 19.5
• Material: NBR (nitrile butadiene rubber)
• Weight [kg]: 0.003
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Material: Plastic
• Weight [kg]: 0.015
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Width [mm]: 32
• Thickness [mm]: 1.98
• Material: Steel
• Weight [kg]: 0.001
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Angle [°]: 90
• Shape: T Shape (T Piece)
• Number of inlets/outlets: 3
• for pipe diameter [mm]: 8

• Fitting Position: Cylinder Head
• Quantity per packing unit: 25
• Inner Diameter [mm]: 50
• Outer Diameter [mm]: 56.3
• Thickness [mm]: 3.15
• Shape: O-Ring
• Manufacturer: ELRING

Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)

• Vehicle Identification Number (VIN) to: 2K-7-150000
• for PR number: 1N3
• Supplementary Article/Supplementary Info: with gasket/seal
• Material: Plastic
• Number of inlets/outlets: 2
• Manufacturer: JP GROUP A/S

• Vehicle Identification Number (VIN) to: 2K-7-150000
• for PR number: 1N3
• Housing material: Plastic
• for OE number: 7M3122291
• Manufacturer: DELLO AUTOMEGA

• for manufacturer number: 7920105
• Manufacturer: KAMOKA

• Üldine informatsioon: pipe union
• Manufacturer: VIKA

• Fitting Position: Lower Right, Radiator
• Vehicle Identification Number (VIN) to: 2K-7-150000
• for PR number: 1N3
• Supplementary Article/Supplementary Info: with gasket/seal
• Supplementary Article/Info 2: with clip
• for OE number: 7M3 122 291, 3B0 122 291C
• Consult accessories list for recommended additional repairs:
• Number of inlets/outlets: 2
• Material: GRP (Glass fibre Reinforced Plastic)
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• for manufacturer number: 7920073
• Manufacturer: KAMOKA

• for manufacturer number: 7920110
• Manufacturer: KAMOKA

• Fitting Position: Radiator, Upper
• Lisainfo: Coolant Flange
• Additional information: Coolant Flange

• Housing material: Plastic
• Colour: black
• for OE number: 1K0122291BA
• Manufacturer: DELLO AUTOMEGA

• Üldine informatsioon: pipe union
• Manufacturer: VIKA

• for OE number: 1K0122291H
• Manufacturer: BGA

• Weight [kg]: 0.03
• Supplementary Article/Supplementary Info: with quick coupling
• for OE number: 1K0 122 291 J
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Radiator, Upper
• Supplementary Article/Info 2: with clip
• Supplementary Article/Supplementary Info: with gasket/seal
• for OE number: 1K0 122 291BA
• Consult accessories list for recommended additional repairs:
• Number of inlets/outlets: 3
• Material: GRP (Glass fibre Reinforced Plastic)
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Materjal: Plastik
• Piirangutega toode/piirangu info: koos tihendiga
• Piirangutega toode/piirangu info 2: koos kinnitusega
• Üldine informatsioon: pipe union
• Manufacturer: VIKA

• Weight [g]: 41
• Material: Plastic
• for OE number: 3B0122291C
• Colour: black
• Packaging length [cm]: 7.5
• Packaging width [cm]: 7.5
• Packaging height [cm]: 8.3
• Manufacturer: MOTORAD

• Materjal: Plastik
• Seerianumber: CTM-VW-043
• Manufacturer: NTY

• Fitting Position: Left, Front
• Supplementary Article/Supplementary Info: without gasket/seal
• Supplementary Article/Info 2: without sensor
• Manufacturer: DELLO AUTOMEGA

• Supplementary Article/Supplementary Info: with gasket/seal
• Supplementary Article/Info 2: with clip
• for OE number: 1K0 122 291J
• Consult accessories list for recommended additional repairs:
• Number of inlets/outlets: 2
• Material: GRP (Glass fibre Reinforced Plastic)
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Diameter 1 [mm]: 20
• Diameter 2 [mm]: 36
• for OE number: 3B0122291B
• Manufacturer: MEAT & DORIA

• for OE number: 3B0122291B
• Supplementary Article/Supplementary Info: with gasket/seal
• Weight [g]: 29
• Supplementary Article/Info 2: without thermostat
• Name: IM 90582
• Manufacturer: ORIGINAL IMPERIUM

• Weight [g]: 29
• Material: Plastic
• for OE number: 1K0122291H
• Packaging length [cm]: 7.5
• Packaging width [cm]: 7.5
• Packaging height [cm]: 8.3
• Manufacturer: MOTORAD

• Fitting Position: Cylinder Head, Left
• Manufacturer: JP GROUP A/S
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

• Supplementary Article/Supplementary Info: with gasket/seal
• Supplementary Article/Info 2: with clip
• for OE number: 1K0 122 291H
• Consult accessories list for recommended additional repairs:
• Number of inlets/outlets: 2
• Material: GRP (Glass fibre Reinforced Plastic)
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Weight [kg]: 0.03
• for OE number: 1K0 122 291 H
• Supplementary Article/Supplementary Info: with quick coupling
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Weight [kg]: 0.055
• for OE number: 1K0 122 291 BA
• Supplementary Article/Supplementary Info: with quick coupling
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Weight [g]: 80
• Material: Plastic
• for OE number: 03G121121D
• Colour: black
• Number of mounting bores: 2
• Packaging length [cm]: 9.1
• Packaging width [cm]: 9.1
• Packaging height [cm]: 13.5
• Manufacturer: MOTORAD

• for manufacturer number: 7920160
• Manufacturer: KAMOKA

• Specification: 1N1, 9AD, 9AP
• Vehicle Identification Number (VIN) from: 2K-8-000 001
• Materjal: Plastik
• Manufacturer: METALCAUCHO

• for OE number: 03L121121A
• Fitting Position: Left
• Supplementary Article/Supplementary Info: without gasket/seal
• Weight [g]: 87
• Supplementary Article/Info 2: without thermostat
• Name: IM 90422
• Manufacturer: ORIGINAL IMPERIUM

• Vehicle Equipment: for vehicles with power steering
• Vehicle Identification Number (VIN) from: 2K-8-000001
• for PR number: 9AD, 9AP
• Fitting Position: Radiator, Lower
• Supplementary Article/Supplementary Info: with gasket/seal
• Supplementary Article/Info 2: with clip
• for OE number: 2K0 122 291
• Consult accessories list for recommended additional repairs:
• Number of inlets/outlets: 2
• Material: GRP (Glass fibre Reinforced Plastic)
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Installatsiooni pool: vasakul
• Piirangutega toode/piirangu info: koos tihendiga
• Kaal (g): 90
• Piirangutega toode/piirangu info 2: ilma termostaadita
• Manufacturer: METALCAUCHO

• Engine Code: BSU
• Name: EP 1.660.007
• Manufacturer: EPS

• Material: Plastic
• Heating/Cooling: with thermal switch connector
• Fitting Position: Front
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: BSU
• Manufacturer: FACET

• Quantity: 1
• Materjal: Plastik
• Installatsiooni pool: ees, üleval
• Läbimõõt 1 (mm): 20
• Läbimõõt 2 (mm): 32
• Läbimõõt 3 (mm): 32
• Manufacturer: 3RG

• for OE number: 03G121132B
• Supplementary Article/Supplementary Info: with gasket/seal
• Weight [g]: 156
• Supplementary Article/Info 2: without thermostat
• Name: IM 90551
• Manufacturer: ORIGINAL IMPERIUM

• Vehicle Equipment: for vehicles with power steering
• Vehicle Identification Number (VIN) from: 2K-8-000001
• for PR number: 9AD, 9AP
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Quantity: 1
• Materjal: Plastik
• Installatsiooni pool: kastipoolselt, stirnseitig, Silindripea
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Üldine informatsioon: pipe union
• Manufacturer: VIKA

• for OE number: 03G121132B
• Manufacturer: BGA

• for OE number: 3B0 122 291 B
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• for OE number: 03L121121A
• Manufacturer: SASIC

• Material: Plastic
• Supplementary Article/Info 2: with seal ring
• for OE number: 1K0 122 291 BA
• Fitting Position: Upper
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Supplementary Article/Info 2: without sensor
• Weight [g]: 150
• Material: Plastic
• for OE number: 03G121132
• Packaging length [cm]: 15.9
• Packaging width [cm]: 15
• Packaging height [cm]: 11
• Manufacturer: MOTORAD

• Installatsiooni pool: Silindripea, kastipoolselt, stirnseitig
• Piirangutega toode/piirangu info: koos tihendiga
• Manufacturer: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Kaal (kg): 0,137
• Piirangutega toode/piirangu info 2: ilma termostaadita
• Manufacturer: METALCAUCHO

• Material: Plastic
• for OE number: 1K0 122 291 H
• Supplementary Article/Supplementary Info: with gasket/seal
• Supplementary Article/Info 2: with clip
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Material: Plastic
• Fitting Position: transmission sided, Cylinder Head
• Supplementary Article/Info 2: with seal ring
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Cylinder Head, Left
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Weight [kg]: 0.151
• Supplementary Article/Supplementary Info: with gasket/seal
• for OE number: 03G 121 132 B
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Weight [kg]: 0.151
• for OE number: 03G 121 132 B
• Supplementary Article/Supplementary Info: with gasket/seal
• Name: SW 33 10 4923
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: BSU
• Diameter 1 [mm]: 20
• Diameter 2 [mm]: 32
• Diameter 3 [mm]: 32
• for OE number: 03G121132B
• Manufacturer: MEAT&DORIA

• Installatsiooni pool: Silindripea, kastipoolselt
• Korpusetüüp: Sünteetikakorpus
• Piirangutega toode/piirangu info 2: ilma andurita
• Piirangutega toode/piirangu info: koos tihendiga
• Manufacturer: METZGER

• Supplementary Article/Supplementary Info: with gasket/seal
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.