• Supplementary Article/Supplementary Info: with gasket/seal
• Manufacturer: JP GROUP
• Lisainfo: Water pump
• Additional information: Water pump

• Driven Units: Camshaft
• Article number of the recommended special tool: GAT4840A, GAT4844
• Supplementary Article/Supplementary Info: with water pump
• Observe technical data:
• Name: Veepump hammasrihmakomplekt
• Manufacturer: GAT
• Lisainfo: KP25649XS-1 GAT
• Additional information: KP25649XS-1 GAT

• for OE number: 03L 121 011
• Number of Teeth: 19
• Water Pump Type: for timing belt drive
• Manufacturer: KAMOKA

• Number of pins (input) [-pin connector]: 3
• Number of pins (output) [-pin connector]: 2
• Plug Type: Female
• Vehicle Equipment: for vehicles with parking heater
• Number of circuits: 2
• Material: CuSn (copper-tin)
• Cable Length [mm]: 360
• Cable cross-section from [mm²]: 0.5
• Cable cross-section to [mm²]: 0.5
• Cable insulation material: Silicone
• Article number of recommended accessories: 2221059
• Manufacturer: METZGER

for OE number: 1K0965561, 1K0965561A, 1T0965561, 3C0965561, 7N0965561, 7N0965561A, 7N0965561B

• Vehicle Equipment: for vehicles with auxiliary water pump
• Fabrication Number: CPW-VW-051
• Manufacturer: NTY

• Number of Teeth: 19
• Number of blades/vanes: 8
• Manufacturer: JPN

• Number of Teeth: 19
• Name: VEEPUMP
• Manufacturer: MAX

• reinforced version:
• Model Year from: 2009
• Packaging length [cm]: 11.2
• Packaging width [cm]: 11.2
• Packaging height [cm]: 11.2
• Weight [kg]: 0.68
• Manufacturer: AKSDASIS

• Water Pump Type: for timing belt drive
• Water pump impeller material: Thermoplast
• Supplementary Article/Info 2: with water pump seal ring
• Operating Mode: Mechanical
• Manufacturer: ASHIKA

• Overall Height [mm]: 95
• Number of Teeth: 19
• Water pump impeller material: Sheet Steel
• Operating Mode: Mechanical
• Manufacturer: ASHIKA

• Vehicle configuration line / variant: TB
• for OE number: 03L121011PX
• Belt Pulley Ø [mm]: 56
• Height 1 [mm]: 28.5
• Weight [kg]: 1.1
• Name: DA DP206
• Manufacturer: DAYCO

• Operating Mode: Mechanical
• Water Pump Type: for timing belt drive
• Manufacturer: DRIVE

• Water pump impeller material: Plastic
• Seal Material: Rubber
• Material: Cast Aluminium
• Number of Teeth: 19
• Number of blades/vanes: 8
• Weight [kg]: 0.725
• Supplementary Article/Supplementary Info: with gasket/seal
• Observe service information:
• Name: VEEPUMP
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• New Part:
• for model code: Jetta
• Engine Code: CAYB
• Vehicle configuration line / variant: TDi
• Supplementary Article/Info 2: with evaporator
• reinforced version:
• Model Year from: 2009
• Manufacturer: DOLZ
• Name: DO A224

• Vehicle Equipment: for vehicles with auxiliary water pump
• Operating Mode: Electric
• Fabrication Number: CPZ-AU-014
• Manufacturer: NTY
• Name: NTY CPZ-AU-014

• Number of Teeth: 19
• Operating Mode: Mechanical
• Supplementary Article/Info 2: with seal ring
• Number of blades/vanes: 7
• Water Pump Pulley Diameter [mm]: 56.23
• Impeller Diameter [mm]: 64
• Water Pump Type: for timing belt drive
• Water pump impeller material: Metal
• Name: VEEPUMP
• Manufacturer: GRA

• Number of Teeth: 19
• Operating Mode: Mechanical
• Supplementary Article/Info 2: with seal ring
• Number of blades/vanes: 8
• Water Pump Pulley Diameter [mm]: 56.23
• Impeller Diameter [mm]: 63.4
• Water Pump Type: for timing belt drive
• Water pump impeller material: Plastic
• Name: VEEPUMP
• Manufacturer: GRA

• Weight [kg]: 0.722
• Packaging length [cm]: 13
• Packaging width [cm]: 13
• Packaging height [cm]: 16
• Manufacturer: CONTITECH-POMPY WODY

• Operating Mode: Mechanical
• Water Pump Type: for timing belt drive
• Water pump impeller material: Aluminium
• Supplementary Article/Supplementary Info: with gasket/seal
• Supplementary Article/Info 2: with seal ring
• for OE number: 5972251
• Quality class: PJ
• Name: Water pump

• Number of Teeth: 19
• Water Pump Pulley Diameter [mm]: 56
• Impeller Diameter [mm]: 64
• Number of blades/vanes: 7
• Operating Mode: Mechanical
• Water pump impeller material: Aluminium
• Supplementary Article/Supplementary Info: with gasket/seal
• Quality class: PJ
• Name: Water pump

• Water pump impeller material: Plastic
• Seal Material: Rubber
• Material: Cast Aluminium
• Number of Teeth: 19
• Number of blades/vanes: 8
• Weight [kg]: 0.725
• Supplementary Article/Supplementary Info: with gasket/seal
• Observe service information:
• Name: SW 30 93 6048
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: CAYB
• Operating Mode: Electric
• Voltage [V]: 12
• Name: Lisaveepump (jahutusvee ringlusssteem)
• Manufacturer: MAX

• Supplementary Article/Supplementary Info: with gasket/seal
• Water Pump Type: for timing belt drive
• Number of Teeth: 19
• Quality: Sealed with SiC/SiC
• New part without deposit:
• Article number of the recommended special tool: 999 990 0002
• Name: VEEPUMP
• Manufacturer: MEY

General Information: MEYLE provides a 100,000-mile guarantee for all MEYLE water pumps and a 4-year warranty for MEYLE-HD water pumps. The 100,00 mile warranty requires the cooling system to be flushed before installation.

• Water Pump Type: for timing belt drive
• Number of Teeth: 19
• SVHC: No SVHC present!
• Name: VEEPUMP
• Manufacturer: INA
• Lisainfo: 538006010
• Additional information: 538006010

• Voltage [V]: 12
• Operating Mode: Electric
• for OE number: 5N0965561
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Supplementary Article/Supplementary Info: with gasket/seal
• Water Pump Type: for timing belt drive
• Number of Teeth: 19
• reinforced version:
• Quality: Sealed with SiC/SiC
• Water pump impeller material: Metal
• New part without deposit:
• Article number of the recommended special tool: 999 990 0002
• Housing material: Stainless Steel
• Chemical Properties: High temperature-resistant
• Name: VEEPUMP
• Manufacturer: MEY

General Information: MEYLE provides a 100,000-mile guarantee for all MEYLE water pumps and a 4-year warranty for MEYLE-HD water pumps. The 100,00 mile warranty requires the cooling system to be flushed before installation.

• Water Pump Type: for timing belt drive
• Water pump impeller material: Plastic
• Supplementary Article/Supplementary Info: with gaskets/seals
• Number of Teeth: 19
• Manufacturer: SKF
• Name: SK VKPC81269

• Operating Mode: Mechanical
• Supplementary Article/Supplementary Info: with gasket/seal
• Water pump impeller material: Metal
• Number of Teeth: 19
• Water Pump Pulley Diameter [mm]: 56
• Number of blades/vanes: 7
• Impeller Diameter [mm]: 64
• Manufacturer: HEPU POMPY WODY

• Pulleys: with belt pulley
• Supplementary Article/Info 2: without lid
• Supplementary Article/Supplementary Info: with gaskets/seals
• Name: VEEPUMP
• Manufacturer: VAL

• for OE number: 5N0 965 561 A
• Manufacturer: KAMOKA

• Operating Mode: Electric
• Voltage [V]: 12
• Number of pins: 3
• Flow rate [l/min.]: 10
• Assy./disassy. by qualified personnel required!:
• Name: HE 8TW358313321
• Manufacturer: HELLA

• Operating Mode: Electric
• Voltage [V]: 12
• Name: Lisaveepump
• Manufacturer: MAX

• Voltage [V]: 12
• Manufacturer: YSPARTS

• Voltage [V]: 12
• Operating Mode: Electric
• for OE number: 5N0965561A
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Operating Mode: Electric
• Rated Voltage [V]: 12
• Number of pins: 3
• Vehicle Equipment: for vehicles with auxiliary water pump
• Connector Shape: oval
• Housing Colour: black
• Hose Diameter [mm]: 22
• Housing Type: Synthetic Material Housing
• Housing material: GRP (Glass fibre Reinforced Plastic)
• Manufacturer Restriction: BUEHLER
• Observe system fill quantity:
• Always compare old and new part (in particular OE No.):
• Consult accessories list for recommended additional repairs:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Operating Mode: Electric
• Voltage [V]: 12
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Name: HE 8TW358304751
• Manufacturer: HELLA

• Voltage [V]: 12
• Operating Mode: Electric
• for OE number: 7N0965561
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Vehicle Equipment: for vehicles with auxiliary water pump
• Manufacturer Restriction: BUHLER
• Operating Mode: Electric
• Manufacturer: DOLZ
• Name: DO EA512A

• for OE number: 5N0965561A
• Operating Mode: Electric
• Name: Lisaveepump
• Manufacturer: NRF

• Operating Mode: Electric
• Name: Lisaveepump
• Manufacturer: NRF

• Version: 1
• Connector Shape: oval
• Material: Plastic
• Operating Mode: Electric
• Voltage [V]: 12
• Manufacturer: NISSENS
• Name: NI 831072

• Vehicle configuration line / variant: AUX
• for OE number: 7E0965561F
• Operating Mode: Electric
• Name: Lisaveepump
• Manufacturer: DAY

• Operating Mode: Electric
• Rated Voltage [V]: 12
• Number of pins: 3
• Vehicle Equipment: for vehicles with auxiliary water pump
• Connector Shape: oval
• Housing Colour: black
• Hose Diameter [mm]: 20
• Housing Type: Synthetic Material Housing
• Housing material: GRP (Glass fibre Reinforced Plastic)
• Observe system fill quantity:
• Consult accessories list for recommended additional repairs:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: CAYB
• Manufacturer: MAGNETI MARELLI

• Vehicle configuration line / variant: AUX
• for OE number: 5N0965561A
• Operating Mode: Electric
• Name: Lisaveepump
• Manufacturer: DAY

• Manufacturer restriction water pump: PIERBURG
• Number of pins: 3
• Pin Shape: Flat
• Plug Type: Male
• Supplementary Article/Info 2: without clip
• Operating Mode: Electric
• Manufacturer: GATES

• Operating Mode: Electric
• Number of pins: 3
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Version: 2
• Connector Shape: oval
• Material: Plastic
• Operating Mode: Electric
• Voltage [V]: 12
• Manufacturer: NISSENS

• Operating Mode: Electric
• Voltage [V]: 12
• for OE number: 7E0 965 561 F
• Manufacturer: HEPU

• for OE number: 5N0 965 561 A
• SVHC: No SVHC present!
• Manufacturer: INA-POMPY WODY

• Weight [kg]: 0.342
• Packaging height [cm]: 16
• Packaging width [cm]: 13
• Packaging length [cm]: 13
• Operating Mode: Electric
• Name: Lisaveepump (jahutusvee ringlusssteem)
• Manufacturer: CON

• Operating Mode: Electric
• Voltage [V]: 12
• for OE number: 5N0 965 561 A
• Manufacturer: HEPU

• Number of Teeth: 160
• Width [mm]: 25
• Number of belts: 1
• Weight [kg]: 2.28
• for article number: A224
• Manufacturer: DOLZ
• Name: DO KD100

• Engine Code: CAYB
• Operating Mode: Electric
• Voltage [V]: 12
• Name: Lisaveepump
• Manufacturer: PIE

• Length [mm]: 1,524
• Number of Teeth: 160
• Width [mm]: 25
• Tooth Pitch [mm]: 9.525
• Pulleys contained: 4
• Name: VEEPUMP HAMMASRIHMAKOMPLEKT
• Manufacturer: BOS

• Manufacturer restriction water pump: BUEHLER
• Number of pins: 3
• Pin Shape: Flat
• Plug Type: Male
• Operating Mode: Electric
• Manufacturer: GATES

• Width [mm]: 25
• Number of Teeth: 160
• Surface: Coated
• Belts: with rounded tooth profile
• Weight [kg]: 2.63
• for OE number: 03L 198 119 F S1
• Observe service information:
• Name: VEEPUMP HAMMASRIHMAKOMPLEKT
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Driven Units: Camshaft
• Vehicle configuration line / variant: HT -CAYB # CA
• Number of Teeth: 160
• Width [mm]: 25
• Length [mm]: 1,524
• Number of belts: 1
• Pulleys contained: 4
• Weight [kg]: 3.1
• Name: VEEPUMP HAMMASRIHMAKOMPLEKT
• Manufacturer: DAY
• Additional information: KTBWP7880 DAYCO
• Lisainfo: KTBWP7880 DAYCO

• Number of Teeth: 160
• Width [mm]: 25
• Number of belts: 1
• for article number: 570043N
• Packaging length [cm]: 28
• Packaging width [cm]: 17.5
• Packaging height [cm]: 17.5
• Weight [kg]: 2.442
• Manufacturer: AKSDASIS

• Number of belts: 1
• Width 1 [mm]: 25
• Number of track rollers: 4
• Number of Teeth: 160
• Manufacturer: SNR
• Name: SN KDP457.720

• Article number of the recommended special tool: VKN 1000
• Number of bolts/screws: 2
• Water pump impeller material: Plastic
• Belt Width [mm]: 25
• Supplementary Article/Supplementary Info: with gaskets/seals
• Supplementary Article/Info 2: with studs
• Number of Teeth: 160
• Name: VEEPUMP HAMMASRIHMAKOMPLEKT
• Manufacturer: SKF
• Lisainfo: VKMC 01148-2 SKF
• Additional information: VKMC 01148-2 SKF

• Number of Teeth 1: 160
• Width 1 [mm]: 25
• Observe service information:
• Follow installation instructions:
• SVHC: No SVHC present!
• Name: VEEPUMP HAMMASRIHMAKOMPLEKT
• Manufacturer: INA
• Lisainfo: 530055032
• Additional information: 530055032

• Operating Mode: Electric
• Manufacturer Restriction: BUEHLER, PIERBURG
• Block Separation:
• Voltage [V]: 12
• Pressure [bar]: 0.1
• Flow rate [l/h]: 730
• Manufacturer: BOSCH

• Number of Teeth 1: 160
• Width 1 [mm]: 25
• Water Pump Type: for timing belt drive
• Manufacturer: METELLI ROZRZAD

• Number of belts: 1
• Width [mm]: 25
• Number of Teeth: 160
• Number of tension rollers: 1
• Number of deflection pulleys: 3
• Supplementary Article/Info 2: with bolts/screws
• Manufacturer: HEPU

• Number of Teeth 1: 160
• Width 1 [mm]: 25
• Water Pump Type: for timing belt drive
• Manufacturer: GRAF

• Driven Units: Camshaft
• Engine Code: CAYB, CAYC
• Packaging length [cm]: 19.5
• Packaging width [cm]: 18.2
• Packaging height [cm]: 18.7
• Number of Teeth: 160
• Weight [kg]: 2.622
• Width [mm]: 25
• Supplementary Article/Supplementary Info: with camshaft screws
• Name: VEEPUMP HAMMASRIHMAKOMPLEKT
• Manufacturer: CON

Technical Information: Appropriate crankshaft bolt(s) available separately. See section belt pulley crankshaft (bolt set)

• Manufacturer Restriction: Pierburg, PIERBURG
• for OE number: 5N0965561
• Operating Mode: Electric
• Alternative Repair Kit: 2221050
• Manufacturer: METZGER

• Driven Units: Camshaft, Water Pump
• Engine Code: CAYB, CAYC
• Pulleys contained: 4
• Number of belts: 1
• Width [mm]: 25
• Number of Teeth: 160
• Operating Mode: Mechanical
• Weight [kg]: 7.159
• Manufacturer: VAICO

Supplementary Article/Supplementary Info: with fastening/mounting material, with coolant, with water pump General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.