• General Information: round hd. screw
• Manufacturer: BORSEHUNG

• Installatsiooni pool: Plokikaas, Väljalaskepool
• põhikeha materjal: GFK (klaaskiuga tugevdatud plastmass)
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Materjal tihend: EPDM (Etüleen-Propüleen-Dieen-Kautsuk)
• Manufacturer: TOPRAN

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: CAVA
• Fitting Position: frontal sided
• OE-numbri jaoks: 034115147A
• Kõrgus (mm): 10
• Materjal: PTFE (Polytetrafluorethylen)
• Siseläbimõõt [mm]: 35
• Välisläbimõõt [mm]: 48
• Manufacturer: FAI

• Engine Code: CTHA, CAVA
• OE-numbri jaoks: 03G 105 021 C
• Jämedus/Tugevus (mm): 10
• Siseläbimõõt [mm]: 35
• Installatsiooni pool: stirnseitig
• Välisläbimõõt [mm]: 48
• Manufacturer: VAICO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fabrication Number: EFR-VW-002
• Manufacturer: NTY
• Name: NTY EFR-VW-002

Manufacturer: KAMOKA

• Engine Code: CTHA, CAVA
• Ühenduste arv: 2
• Name: Juhtklapp,nukkvolli asend
• Manufacturer: MAX

• Operating Mode: Electric-hydraulic
• Valve type: for inlet valves
• Number of pins: 2
• Guarantee: 3 years guarantee
• Weight [kg]: 0.2
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Article number of recommended accessories: TC0105K
• Manufacturer: BGA

• Quantity: 1
• General Information: control valve
• Manufacturer: VIKA

• Construction Year to: 11.2015
• Ühenduste arv: 2
• Pistikkontakti kuju: lame
• Pistikute teostus: Male
• Pikkus (mm): 96
• Laius (mm): 28
• Kõrgus (mm): 28
• Name: Juhtklapp,nukkvolli asend
• Manufacturer: GAT

• Fitting Position: Cylinder Head
• Weight [kg]: 0.64
• for article number: 120-09-056
• for OE number: 06H103144J, 06H103144K
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Rakendustüüp: elektriline-hüdrauliline
• Pistikkontaktide arv: 2
• Pistikukatte kuju: D-kuju
• Piirangutega toode/piirangu info: koos tihendiga
• Jälgige sõidukitootja juhiseid:
• Manufacturer: TOPRAN

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Rakendustüüp: elektriline
• SVHC: SVHS aineid ei esine
• Manufacturer: INA

• Engine Code: CAVA, CTHA
• Block Separation:
• Pistikkontaktide arv: 2
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Rakendustüüp: elektriline-hüdrauliline
• Pistikukatte kuju: ovaalne
• Manufacturer: VAICO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: CTHA, CAVA
• Hammastehulk: 36
• Välisläbimõõt [mm]: 81
• Hooldusinfot jälgida:
• Name: NUKKVOLLISEADISTAJA
• Manufacturer: MAX

• Guarantee: 3 years guarantee
• for OE number: 03C 906 455 A
• Operating Mode: Electric
• Number of pins: 2
• Supplementary Article/Info 2: with seal ring
• Manufacturer: AT AUTOTEILE GERMANY

General Information: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.

• Fabrication Number: RKZ-AU-005
• Number of Teeth: 36
• Fitting Position: Intake Side
• Operating Mode: Hydraulic
• Outer Diameter [mm]: 81
• Manufacturer: NTY
• Name: NTY RKZ-AU-005

• Number of Teeth: 38
• Fitting Position: Intake Side
• Outer Diameter [mm]: 81
• Fabrication Number: RKZ-VW-005
• Manufacturer: NTY

• OE-numbri jaoks: 03C906455A
• Name: Juhtklapp,nukkvolli asend
• Manufacturer: MD

• Number of Teeth: 36
• Fitting Position: Intake Side
• Required quantity: 1
• Engine Timing: Timing Chain
• Guarantee: 3 years guarantee
• Weight [kg]: 0.69
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Ühenduste arv: 2
• Kaal (kg): 0,179
• Manufacturer: FEBI BILSTEIN

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Observe the vehicle manufacturer specifications:
• Supplementary Article/Info 2: Control Unit/Software must be trained/updated
• Always compare old and new part (in particular OE No.):
• Name: ZAWàR ZMIENNYCH FAZ ROZRZ¤DU VW GOLF 1.4TSI 07-
• Manufacturer: VDO

• Operating Mode: Electric-hydraulic
• Valve type: for inlet valves
• Manufacturer: HEPU

• Piirangutega toode/piirangu info 2: ilma kruvita
• Hammastehulk: 38
• Manufacturer: KAMOKA

• Installatsiooni pool: Sisselaskepool
• Välisläbimõõt [mm]: 81
• Piirangutega toode/piirangu info 2: ilma kruvita
• Hammastehulk: 36
• Manufacturer: KAMOKA

• Hammastehulk: 19
• Installatsiooni pool: Väljalaskepool
• Name: Nukkvolliseadistaja
• Manufacturer: MAX

• Fitting Position: Intake Side
• Number of Teeth: 36
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Engine Code: CAVA, CTHA
• Block Separation:
• Klapitüüp: Juhtklapp
• Rakendustüüp: elektriline
• Pinge [V]: 12
• Manufacturer: PIERBURG

• Installatsiooni pool: Sisselaskepool
• Pikkus (mm): 401,5
• Keermemõõt: M 10
• Keerme samm (mm): 1,25
• Jälgige sõidukitootja juhiseid:
• Manufacturer: TOPRAN

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: CAVA
• Fitting Position: Intake Side
• Number of Teeth: 36
• Name: Nukkvolliseadistaja
• Manufacturer: MVE

• Number of Teeth: 38
• General Information: Camshaft adjuster
• Manufacturer: VIKA

• Engine Code: CAVA, CTHA
• Vehicle Identification Number (VIN) to: 7N-G-050 000
• Fitting Position: Intake Side
• Operating Mode: Hydraulic
• Number of Teeth: 38
• Manufacturer: DR MOTOR PRZEWODY PRZELEWOWE
• Name: DRM 01578

• Fitting Position: Intake Side
• Number of Teeth: 19
• for OE number: 06F 109 088J
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Engine Code: CTHA, CAVA
• Block Separation:
• Fitting Position: Intake Side
• Length [mm]: 401.2
• Diameter [mm]: 49.4
• Name: NUKKVOLL
• Manufacturer: FRE

• Engine Code: CTHA, CAVA
• Block Separation:
• Fitting Position: Exhaust Side
• Length [mm]: 392.8
• Diameter [mm]: 49.4
• Name: NUKKVOLL
• Manufacturer: FRE

• Installatsiooni pool: Väljalaskepool
• Kaal (kg): 1,451
• Manufacturer: FEBI BILSTEIN

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Weight [kg]: 0.626
• Outer Diameter [mm]: 81
• Required quantity: 1
• Number of Teeth: 36
• General Information: camshaft adjuster unit
• Manufacturer: VIKA

• Fitting Position: Intake Side
• General Information: camshaft; intake
• Manufacturer: BORSEHUNG

• Fitting Position: Exhaust Side
• General Information: camshaft; exhaust
• Manufacturer: BORSEHUNG

• Engine Code: CAVA, CTHA
• Block Separation:
• Versioon: gegossen
• Installatsiooni pool: Väljalaskepool
• Name: Nukkvoll
• Manufacturer: KS

• Production date to: 24.05.2015
• Fitting Position: Intake Side
• Operating Mode: Hydraulic
• Outer Diameter [mm]: 81
• Number of Teeth: 36
• Name: Nukkvolliseadistaja
• Manufacturer: DRM

• Välisläbimõõt [mm]: 81
• Hammastehulk: 36
• Kaal (kg): 0,626
• Hooldusinfot jälgida:
• Name: NUKKVOLLISEADISTAJA
• Manufacturer: FEB

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Välisläbimõõt [mm]: 81
• Hammastehulk: 36
• Kaal (kg): 0,709
• Piirangutega toode/piirangu info 2: koos kruviga
• Hooldusinfot jälgida:
• Name: Nukkvolliseadistaja
• Manufacturer: FEB

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year to: 05.2015
• Engine Code: CTHA, CAVA
• Block Separation:
• Hammastehulk: 36
• Name: KOO WAKA ROZRZ¤DU VW GOLF 1.4TSI 04-
• Manufacturer: KS

• Engine Code: CAVA, CTHA
• Block Separation:
• Versioon: gegossen
• Installatsiooni pool: Sisselaskepool
• Name: NUKKVOLL
• Manufacturer: KS

• Installatsiooni pool: Sisselaskepool
• Kaal (kg): 1,618
• Manufacturer: FEBI BILSTEIN

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: CAVA
• Production date to: 24.05.2015
• Välisläbimõõt [mm]: 81
• Hammastehulk: 36
• Installatsiooni pool: Sisselaskepool
• Rakendustüüp: hüdrauliline
• Manufacturer: VAICO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: CTHA
• Construction Year from: 05.2015
• Hammastehulk: 38
• Kaal (kg): 0,694
• Piirangutega toode/piirangu info 2: koos kruviga
• Manufacturer: FEBI BILSTEIN

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: CAVA
• Materjal: Terasvalu
• Klapitüüp: väljalaskeklapile
• Manufacturer: FAI AUTOPARTS

• Engine Code: CAVA
• Materjal: Terasvalu
• Klapitüüp: Sisselaskeklapi jaoks
• Manufacturer: FAI AUTOPARTS

• Construction Year from: 06.2015
• Engine Code: CAVA, CTHA
• Block Separation:
• Hammastehulk: 38
• Manufacturer: KOLBENSCHMIDT

• Production date to: 24.05.2015
• Operating Mode: Hydraulic
• Number of Teeth: 36
• Supplementary Article/Info 2: without screw
• Manufacturer: METZGER

• Engine Code: CAVA, CTHA
• Installatsiooni pool: Sisselaskepool
• Kruvide arv: 1
• Hammastehulk: 36
• Manufacturer: SKF

• Number of Teeth: 54
• Supplementary Article/Supplementary Info: with accessories
• Fitting Position: Intake Side
• Manufacturer: HEPU

• Engine Code: CAVA
• Installatsiooni pool: Väljalaskepool
• Materjal: Metall
• Manufacturer: FEDERAL MOGUL

• Engine Code: CAVA
• Installatsiooni pool: Sisselaskepool
• Materjal: Metall
• Manufacturer: FEDERAL MOGUL

• Construction Year to: 05.2015
• Fitting Position: Intake Side
• Required quantity: 1
• Veoülekande liik: Kett
• Rakendustüüp: hüdrauliline
• Hammastehulk: 36
• SVHC: SVHS aineid ei esine
• Manufacturer: INA

• Number of Teeth: 36
• Fitting Position: Intake Side
• for OE number: 03C 109 088 E
• Guarantee: 3 years guarantee
• Supplementary Article/Info 2: without screw
• Operating Mode: Hydraulic
• Manufacturer: AT AUTOTEILE GERMANY

General Information: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.