Lisainfo: (AM)

• Thread Size: M12x1,5
• Spanner Size: 19
• Number of pins: 2
• Manufacturer: OYODO

• Engine Code: LQ2(49CUL3)
• Pressure [bar]: 0.4
• Thread Size: 1/8 GAS
• Spanner Size: 24
• Manufacturer: FACET

• Engine Code: LQ2(49CUL3)
• Pressure [bar]: 0.4
• Thread Size: 1/8 GAS
• Spanner Size: 24
• Name: OLISURVELšLITUS
• Manufacturer: EPS

• Engine Code: LQ2(49CUL3)
• Pressure [bar]: 0.4
• Thread Size: 1/8 GAS
• Spanner Size: 24
• Number of pins: 1
• Manufacturer: KAVO

• Switch Pressure [bar]: 0.3
• Thread Size: 1/8x28 BSPT
• Sensor Type: Closed-type Sensor
• Name: OLISURVELšLITUS
• Manufacturer: VER

• Pressure [bar]: 0.3
• Housing Colour: black
• Thread Size: 1/8
• Spanner Size: 24
• Number of pins: 1
• Name: OLISURVELšLITUS
• Manufacturer: DLP
• Quality class: PJ

Additional information: "Tootja: DELPHI
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
(kvaliteediklass: PJ)"

Manufacturer: JPN

• Engine Code: LQ2(49CUL3)
• Thread Size: M12 x 1.5
• Number of pins: 2
• Manufacturer: KAVO PARTS

• Engine Code: LQ2(49CUL3)
• Housing Colour: black
• Thread Size: M12x1,5
• Spanner Size: 19
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MAX
• Lisainfo: 21-0225
• Additional information: 21-0225

• Engine Code: LQ2(49CUL3)
• Manufacturer: BOSCH

• Thread Size: M12x1.5
• Manufacturer: VERNET

• Thread Size: M12 x 1,5
• Number of pins: 2
• Manufacturer: ERA

• Sensor Type: Active sensor
• Manufacturer: KAMOKA

• Number of pins: 3
• Manufacturer: JPN

• Pressure [bar]: 3
• Housing Colour: black
• Thread Size: R1/8
• Diameter [mm]: 24
• Spanner Size: 24
• Number of pins: 1
• Manufacturer: DELPHI

• Thread Size: M14x1,5 mm
• Alternatively:
• Number of pins: 2
• Alternative Repair Kit: 550719
• Manufacturer: ERA

• Thread Size: M12x1,5
• Colour: black
• Spanner Size: 19
• Supplementary Article/Supplementary Info: with gasket/seal
• Number of pins: 2
• Weight [kg]: 0.03
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Thread Size: M14x1.5
• Manufacturer: VERNET

• for OE number: 96325868
• Length [mm]: 280
• Supplementary Article/Info 2: with seal ring
• Fabrication Number: ECP-DW-004
• Manufacturer: NTY

• Length [mm]: 51
• Fabrication Number: ECP-DW-006
• Manufacturer: NTY

• Sensor Type: Inductive Sensor
• Number of pins: 3
• Cable Length [mm]: 270
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: oval
• Number of pins: 2
• Socket colour: black
• Spanner Size: 19
• Thread Size: M12x1.5
• for OE number: 55199579
• Supplementary Article/Info 2: with seal ring
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Engine Code: LQ2(49CUL3), LBF(49CUL3)
• Block Separation:
• Sensor Type: NTC Sensor
• Supplementary Article/Info 2: with seal ring
• Colour: black
• Number of pins: 2
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: MEY

• Engine Code: LQ2(49CUL3)
• Housing Colour: black
• Thread Size: M12x1,5
• Spanner Size: 19
• Corresponds to the original part in colour: white
• Manufacturer: FACET

• Fabrication Number: ECT-CH-011
• Number of pins: 2
• Voltage [V]: 12
• Housing Colour: white
• Sensor Type: NTC Sensor
• Manufacturer: NTY
• Name: NTY ECT-CH-011

• Engine Code: LQ2(49CUL3)
• Housing Colour: black
• Thread Size: M12x1,5
• Spanner Size: 19
• Corresponds to the original part in colour: white
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Sensor Type: Inductive Sensor
• Number of pins: 3
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Required quantity: 1
• Sensor Type: Hall Sensor
• Mounting Type: Screw Connection
• Shape: rectangular
• Number of pins: 3
• Supplementary Article/Info 2: with seal ring
• Manufacturer: NRF

• Quantity: 1
• Voltage [V]: 12
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: MAX

• Number of pins: 2
• Manufacturer: ERA

Manufacturer: JAPKO

Manufacturer: ASHIKA

• Voltage [V]: 12
• Thread Size: M 14x1,5
• Number of pins: 2
• Housing Colour: white
• Manufacturer: FAE ELEKTRYKA

• Housing Colour: black
• Number of pins: 2
• Thread Size: M12X1.5-6g
• Spanner Size: 19
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: DLP

• Quantity: 1
• Number of pins: 2
• Housing Colour: black
• Thread Size: M 14X1.5-6g
• Spanner Size: S21
• Name: DE TS10527
• Manufacturer: DELPHI

• Length [mm]: 280
• for OE number: 96325868
• Supplementary Article/Info 2: with seal ring
• Number of pins: 3
• Name: Andur, v„ntvoll
• Manufacturer: MAX

Manufacturer: MAGNETI MARELLI

• Number of pins: 3
• Connector Shape: rectangular
• Colour: grey
• Cable Length [mm]: 325
• for OE number: 96253545
• Manufacturer: MEAT&DORIA

Manufacturer: JPN

Manufacturer: OYODO

• Required quantity: 1
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with seal ring
• Assy./disassy. by qualified personnel required!:
• Name: Andur,Nukkvollipositsioon
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 3
• Sensor Type: Inductive Sensor
• Connector Shape: rectangular
• Supplementary Article/Info 2: without cable
• Quality: OE EQUIVALENT
• for OE number: 19206
• Name: Andur,Nukkvollipositsioon
• Manufacturer: MD

• Mounting Type: Bolted
• Voltage [V]: 12
• Resistor [Ohm]: 2,700, 311
• Supplementary Article/Supplementary Info: with gasket/seal
• Temperature range from [°C]: 25
• Temperature range to [°C]: 80
• Thread Size: M12x1,5
• Colour: black
• Sensor Type: NTC Sensor
• Number of pins: 2
• Corresponds to the original part in colour: black
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PT009107271

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 3
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: with seal ring
• Cable Length [mm]: 325
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PU009168981
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Resistor [Ohm]: 550
• Cable Length [mm]: 270
• Alternatively:
• Number of pins: 3
• Fitting Depth [mm]: 38
• Alternative Repair Kit: 550402
• Manufacturer: ERA

Manufacturer: MAGNETI MARELLI

• Number of pins: 3
• Fitting Depth [mm]: 24
• Supplementary Article/Info 2: with seal ring
• Manufacturer: ERA

• Manufacturer: MAGNETI MARELLI
• Name: MM SAC107

• Engine Code: LQ2(49CUL3)
• Required quantity: 1
• Thread Size: M14x1,5
• Spanner Size: 21
• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: EPS

• Construction Year to: 12.2005
• Number of pins: 3
• Number of mounting bores: 2
• Rotation Direction: Clockwise rotation
• Supplementary Article/Info 2: without cable
• for OE number: 93740916
• Name: Andur,drosselklapiasend
• Manufacturer: MD

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BREMI
• Additional information: MD60084
• Lisainfo: MD60084

• Quantity: 1
• Number of pins: 3
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: DLP
• Quality class: PJ

Additional information: "Tootja: DELPHI
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
(kvaliteediklass: PJ)"

• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Construction Year from: 09.2005
• Number of pins: 3
• Connector Shape: rectangular
• Cable Length [mm]: 330
• Sensor Type: Inductive Sensor
• for OE number: 96452986
• Name: Andur, v„ntvoll
• Manufacturer: MD

• Resistor [Ohm]: 500
• Cable Length [mm]: 370
• Alternatively:
• Number of pins: 3
• Fitting Depth [mm]: 24
• Alternative Repair Kit: 550824
• Manufacturer: ERA

• Length [mm]: 51.2
• Number of connectors: 3
• Weight [kg]: 0.03
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Weight [kg]: 0.04
• for OE number: 96279856
• Manufacturer: BLUE PRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Length [mm]: 380
• Fitting Position: after catalytic converter
• Fabrication Number: ESL-DW-006
• Manufacturer: NTY

• Engine Code: LQ2(49CUL3), LBF(49CUL3)
• Quantity: 1
• Block Separation:
• Sensor Type: Piezoelectric Sensor
• Number of pins: 3
• Manufacturer: MEY

Name: CZUJNIK SPALANIA STUKOWEGO DAEWOO LANOS, CHERVROLET AVEO 97-

• Required quantity: 1
• Sensor Type: Inductive Sensor
• Number of pins: 3
• Voltage [V]: 12
• Connector Shape: rectangular
• Supplementary Article/Info 2: without cable
• Resistor [Ohm]: 690
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: VAL

• Cable Length [mm]: 480
• Oxygen Sensor: Heated, Thread pre-greased
• Number of circuits: 4
• Fabrication Number: ESL-DW-002
• Manufacturer: NTY

• Oxygen Sensor: Regulating Probe
• Number of circuits: 4
• Manufacturer: KAMOKA

• Number of pins: 4
• Manufacturer: METZGER

• Oxygen Sensor: Oxygen Sensor
• Voltage [V]: 12
• Guarantee: 3 years guarantee
• Number of circuits: 2
• Weight [kg]: 0.08
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV902

• Construction Year from: 09.2005
• for OE number: 96452986
• Manufacturer: OYODO

• Cable Length [mm]: 330
• Conductor Number: 1
• Oxygen Sensor: Regulating Probe
• Manufacturer: JAPKO

• Quantity: 1
• Cable Length [mm]: 275
• Number of pins: 3
• Name: DETONATSIOONIANDUR
• Manufacturer: DLP

• Engine Code: LQ2(49CUL3)
• Required quantity: 1
• Length [mm]: 350
• Manufacturer: FACET

• Engine Code: LQ2(49CUL3)
• Required quantity: 1
• Length [mm]: 350
• Name: EP 1.957.052
• Manufacturer: EPS

• Cable Length [mm]: 350
• Number of pins: 3
• Housing Colour: grey
• Manufacturer: FAE

• Required quantity: 1
• Resistor [Ohm]: 550
• Cable Length [mm]: 280
• Number of pins: 3
• Number of connectors: 3
• Rated Voltage [V]: 12
• Housing Colour: black
• Connector Shape: rectangular
• Weight [kg]: 0.09
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of connectors: 3
• Cable Length [mm]: 285
• Weight [kg]: 0.09
• for OE number: 96325868
• Supplementary Article/Info 2: with seal ring
• Name: ANDUR, VŽNTVOLL
• Manufacturer: BLP

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Cable Length [mm]: 350
• Number of pins: 3
• Housing Colour: black
• Connector Shape: rectangular
• Manufacturer: FAE

• Engine Code: LQ2(49CUL3)
• Construction Year to: 12.2005
• Number of connectors: 3
• Cable Length [mm]: 214
• Weight [kg]: 0.079
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Oxygen Sensor: Diagnostic Probe, Planar probe, Heated
• Fitting Position: after catalytic converter
• Quantity: 1
• Cable Length [mm]: 380
• Manufacturer: DLP

Name: SONDA LAMBDA CHEVROLET CAPTIVA, MATIZ, SPARK/ DAEWOO MATIZ/ OPEL ANTARA

• Engine Code: LQ2(49CUL3)
• Oxygen Sensor: Regulating Probe, Diagnostic Probe, Finger probe
• Block Separation:
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Transmission Type: Manual Transmission
• Name: LAMBDA ANDUR
• Manufacturer: MAX

Fitting Position: before catalytic converter, after catalytic converter

• Oxygen Sensor: Regulating Probe, Oxygen Sensor
• Engine Code: A08S, F8CV
• Voltage [V]: 12
• Length [mm]: 400
• Guarantee: 3 years guarantee
• Number of circuits: 4
• Weight [kg]: 0.09
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: ESEN SKV

• Transmission Type: Fully Automatic
• Oxygen Sensor: Oxygen Sensor
• Voltage [V]: 12
• Length [mm]: 590
• Guarantee: 3 years guarantee
• Number of circuits: 4
• Weight [kg]: 0.13
• Resistor [Ohm]: 6
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV568

• Transmission Type: Automatic Transmission
• Oxygen Sensor: Regulating Probe, Heated
• Model Year to: 2010
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 500
• Weight [kg]: 0.097
• Name: SW 33 10 3090
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Oxygen Sensor: Regulating Probe
• Number of pins: 4
• Cable Length [mm]: 230
• Overall Length [mm]: 380
• for OE number: 0258005253
• Manufacturer: MEAT & DORIA

• Oxygen Sensor: Diagnostic Probe, Heated
• Voltage [V]: 12
• Length [mm]: 420
• Guarantee: 3 years guarantee
• Number of circuits: 4
• Weight [kg]: 0.12
• Resistor [Ohm]: 13
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV743
• Manufacturer: ESEN SKV

• Oxygen Sensor: Oxygen Sensor
• Cable Length [mm]: 290
• Alternatively:
• Number of circuits: 4
• Alternative Repair Kit: 570112
• Manufacturer: ERA

• Construction Year from: 04.2005
• Vehicle Identification Number (VIN) to: 041220
• Fitting Position: after catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Oxygen Sensor: Planar probe, Heated, Thread pre-greased
• Supplementary Article/Info 2: without plug
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: LQ2(49CUL3)
• Oxygen Sensor: Regulating Probe, Diagnostic Probe
• Transmission Type: Manual Transmission
• Block Separation:
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

Fitting Position: before catalytic converter, after catalytic converter

• Oxygen Sensor: Regulating Probe, Heated
• Fitting Position: before catalytic converter
• Required quantity: 1
• Cable Length [mm]: 255
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Name: Lambda andur
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Oxygen Sensor: Heated
• Voltage [V]: 12
• Conductor Number: 1
• Cable Length [mm]: 528
• Name: LAMBDA ANDUR
• Manufacturer: PIE

• Engine Code: LQ2(49CUL3)
• Oxygen Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Transmission Type: Automatic Transmission
• Number of circuits: 4
• Overall Length [mm]: 500
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Connector Shape: oval
• Material: Plastic
• Number of pins: 2
• Plug Type: Female
• Sensor Type: NTC Sensor
• Spanner Size: S19
• Thread Size: M12*1,5

Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.