Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Engine Code: K9K 874
- Filter type: Filter Insert
- Height [mm]: 113
- Inner Diameter [mm]: 24
- Outer Diameter [mm]: 58
- Sealing Ring Diameter [mm]: 62.7
- Weight [kg]: 0.052
- Supplementary Article/Info 2: with seal ring
- Manufacturer: FEBI BILSTEIN
- Additional information: FE171346
- Lisainfo: FE171346
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Filter type: Filter Insert
- Inner Diameter [mm]: 24
- Height [mm]: 113
- Outer Diameter [mm]: 57.5
- Sealing Ring Diameter [mm]: 62.7
- Filter type: Filter Insert
- Height [mm]: 112
- Outer Diameter [mm]: 57
- Inner Diameter 1 [mm]: 23
- Inner Diameter 2 [mm]: 21
- Manufacturer: KAMOKA FILTRY
- Filter type: Filter Insert
- Inner Diameter [mm]: 24
- Height [mm]: 113
- Outer Diameter [mm]: 57.5
- Sealing Ring Diameter [mm]: 62.7
- Manufacturer: JAPKO
- Filter type: Filter Insert
- Height [mm]: 112
- Outer Diameter 1 [mm]: 57
- Inner Diameter 1 [mm]: 23
- Inner Diameter 2 [mm]: 21
- Manufacturer: DENCKERMANN FILTRY
- Height [mm]: 112.5
- Filter type: Filter Insert
- Outer Diameter 1 [mm]: 57.5
- Inner Diameter 1 [mm]: 23.5
- Inner Diameter 2 [mm]: 21.5
- Name: CFD DFO0702
- Manufacturer: DACO
- Engine Code: K9K 874
- Filter type: Filter Insert
- Inner Diameter [mm]: 24
- Height [mm]: 113
- Outer Diameter [mm]: 58
- Sealing Ring Diameter [mm]: 63
- Weight [kg]: 0.052
- Supplementary Article/Info 2: with seal ring
- Observe service information:
- Manufacturer: BLUE PRINT FILTRY
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Height [mm]: 112
- Outer Diameter [mm]: 58
- Filter type: Filter Insert
- Inner Diameter 1 [mm]: 25
- Inner Diameter 2 [mm]: 25
- Manufacturer: KAVO PARTS
-
Filter type: Spin-
on Filter - Height [mm]: 79
- Thread Size: M20x1.5
- Outer Diameter [mm]: 75
- Inner Diameter 1 [mm]: 71
- Inner Diameter 2 [mm]: 62
- Weight [kg]: 0.28
- Manufacturer: VALEO
- Name: VA 586144
- Filter type: Filter Insert
- Height [mm]: 113
- Outer Diameter 1 [mm]: 58
- Inner Diameter 1 [mm]: 24
- Inner Diameter 2 [mm]: 22
- SVHC: No SVHC present!
- Manufacturer: FILTRON
- Height [mm]: 64
-
Thread Size: M 20 X 1,
5 -
Supplementary Article/Info 2: with one anti-
return valve - Inner Diameter 1 [mm]: 62
- Bypass Valve Opening Pressure [bar]: 2
- Inner Diameter 2 [mm]: 71
- Outer Diameter [mm]: 76
-
Filter type: Spin-
on Filter - Weight [kg]: 0.311
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Construction Year from: 07.2018
- Filter type: Filter Insert
-
Supplementary Article/Supplementary Info: with gasket/
seal - Height [mm]: 113
- Outer Diameter [mm]: 57
- Inner Diameter 1 [mm]: 24
- Manufacturer: BOSCH
- Name: BS F026407088
- Filter type: Filter Insert
- Inner Diameter [mm]: 24
- Outer Diameter [mm]: 56
- Manufacturer: FAST
- Weight [kg]: 0.007
- Packaging length [cm]: 10
- Packaging width [cm]: 10
- Packaging height [cm]: 2
- Manufacturer: FEBEST
- Filter type: Filter Insert
- Diameter [mm]: 57.5
- Height [mm]: 112.5
- Inner Diameter 2 [mm]: 26
- Inner Diameter 3 [mm]: 25.5
- Sealing Ring Diameter [mm]: 63
- Thickness [mm]: 4.3
-
Supplementary Article/Supplementary Info: with gasket/
seal - Packaging height [cm]: 12.1
- Net Weight [g]: 51
- Packaging length [cm]: 6.6
- Packaging width [cm]: 6.6
- Name: KN OX1308D
- Manufacturer: KNECHT
- Filter type: Filter Insert
- Height [mm]: 112
- Outer Diameter [mm]: 58
- Inner Diameter [mm]: 22
- Quality class: PJ
- Name: Oil filter
- Filtritüüp: Filtrer
- Kõrgus (mm): 112
- Välisläbimõõt [mm]: 58
- Siseläbimõõt [mm]: 22
- Manufacturer: PURFLUX
- Filter type: Filter Insert
- Diameter [mm]: 57.5
- Height [mm]: 112.5
- Inner Diameter 2 [mm]: 26
- Inner Diameter 3 [mm]: 25.5
- Sealing Ring Diameter [mm]: 63
- Thickness [mm]: 4.3
-
Supplementary Article/Supplementary Info: with gasket/
seal - Packaging height [cm]: 12.1
- Net Weight [g]: 51
- Packaging length [cm]: 6.6
- Packaging width [cm]: 6.6
- Manufacturer: MAHLE KNECHT
- Filter type: Filter Insert
- Outer Diameter [mm]: 55.5
- Inner Diameter [mm]: 24
- Inner Diameter 1 [mm]: 24
- Height [mm]: 112
- Manufacturer: HENGST FILTER
- Filter type: Filter Insert
-
Supplementary Article/Supplementary Info: with gasket/
seal - Height [mm]: 113
- Inner Diameter [mm]: 24
- Outer Diameter [mm]: 57
- SVHC: No SVHC present!
-
Manufacturer: MANN-
FILTER
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks