Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Quantity per packing unit: 50
-
Jämedus/Tugevus (mm): 1,
5 -
Kaal (kg): 0,
02 -
Materjal: Kumm/
metall -
Siseläbimõõt [mm]: 16,
7 - Välisläbimõõt [mm]: 24
- Piirangutega toode/piirangu info 2: Õliväljalaske kruvi jaoks
- Manufacturer: METALCAUCHO
- Quantity per packing unit: 50
-
Jämedus/Tugevus (mm): 1,
5 -
Kaal (kg): 0,
002 -
Materjal: Kumm/
metall - Siseläbimõõt [mm]: 14
- Välisläbimõõt [mm]: 22
- Kaal (g): 1
- Manufacturer: METALCAUCHO
- Quantity per packing unit: 10
- Material: Copper
- Outer Diameter [mm]: 22
- Inner Diameter [mm]: 16
- Thickness [mm]: 2
- Shape: C Shape
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Quantity per packing unit: 10
- Inner Diameter [mm]: 16
- Outer Diameter [mm]: 24
- Thickness [mm]: 2
-
Sealing lip material: NBR
(nitrile butadiene rubber) - Gasket Design: Metal Elastomer Gasket
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Quantity per packing unit: 25
- Weight [kg]: 0.002
- Fitting Position: Oil Sump
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Quantity per packing unit: 25
- Inner Diameter [mm]: 16
- Outer Diameter [mm]: 24
- Thickness [mm]: 1.5
- Gasket Design: Metal Elastomer Gasket
-
Material: NBR
(nitrile butadiene rubber) - Shape: A Shape
-
Alternative Repair Kit: 036.400,
505.550, 505.540 - Manufacturer: ELRING
- Lisainfo: 834.823 ELR
- Additional information: 834.823 ELR
- Thickness [mm]: 1.5
- Inner Diameter [mm]: 16.7
- Outer Diameter [mm]: 24
-
Material: Rubber/
Metal - Weight [kg]: 0.02
-
Name: RONGASTIHEND,
OLI RAVOOLUKRUVI - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Quantity per packing unit: 10
-
Kaal (kg): 0,
028 - Keermemõõt: 16x150
- Kaal (g): 28
- Manufacturer: METALCAUCHO
- Pikkus (mm): 19
-
Keermemõõt: M16 x 1,
50 - Manufacturer: 3RG
- Quantity per packing unit: 5
- Bolt Head-/Nut Design: Inner rectangle
- Thread Size: M 16
- Thread Pitch [mm]: 1.5
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Thread Size: M16x1,
5 - Length [mm]: 12
-
Additionally required articles (article numbers): 542.470.100,
968.330.100 - Name: SULGURKRUVI
- Manufacturer: FIS
-
Thread Size: M16x1,
5 - Length [mm]: 12
- Supplementary Article/Info 2: with seal ring
- Alternatively:
- Name: SULGURKRUVI
- Manufacturer: FIS
- Outer Diameter [mm]: 24
- Inner Diameter [mm]: 16.7
- Thickness [mm]: 1.5
-
Material: Rubber/
Metal - Packing Type: Blister Pack
- Manufacturer: CORTECO USZCZELKI
-
Pikkus (mm): 15,
5 -
Keermemõõt: M16 x 1,
5 - Kruvipea-/Mutriprofiil: sisekuuskant
- Manufacturer: AIC
Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Quantity per packing unit: 5
- for OE number: 016393
-
Article number of recommended accessories: V25-
0583 - Length [mm]: 12
-
External Thread [mm]: M16 x 1,
5 - Bolt Head-/Nut Design: Inner rectangle
- Supplementary Article/Info 2: without seal ring
- Thread Pitch [mm]: 1.5
- Fitting Position: engine sided
-
Thread Size: M16 x 1,
5 - Required quantity: 1
- Thread Length [mm]: 12
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Length [mm]: 17
- Outer Diameter [mm]: 22
-
External Thread Size: M16 x 1,
5 - Thread Length [mm]: 13
- Spanner Size: 8
- Bolt Head-/Nut Design: Inner rectangle
- Material: Steel
-
Surface: Zinc-
coated - Screw length below head [mm]: 17
- Weight [kg]: 0.02
- Supplementary Article/Info 2: without seal ring
-
Name: SULGURKRUVI,
OLIVANN - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Length [mm]: 17
- Outer Diameter [mm]: 22
-
External Thread Size: M16 x 1,
5 - Thread Length [mm]: 13
- Spanner Size: 8
- Bolt Head-/Nut Design: Inner rectangle
- Material: Steel
-
Surface: Zinc-
coated - Screw length below head [mm]: 17
- Weight [kg]: 0.02
- Supplementary Article/Info 2: without seal ring
-
Name: SULGURKRUVI,
OLIVANN - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Pikkus (mm): 14
- Võtmekaugus: 8
- Kruvipea-/Mutriprofiil: sisenelikant
- Manufacturer: FAST
-
Thread Size: M16x1,
5x12 - Bolt Head-/Nut Design: Inner rectangle
- Alternative Repair Kit: 434.940
- Supplementary Article/Info 2: without seal ring
-
Name: Sulgurkruvi,
olivann - Manufacturer: ELR
-
Thread Size: M16x1,
5x12 - Spanner Size: 8
- Bolt Head-/Nut Design: Inner rectangle
- Supplementary Article/Info 2: with seal ring
-
Name: Sulgurkruvi,
olivann - Manufacturer: DRM
- Material: Steel
- Length [mm]: 20
- Spanner Size: 8
- Bolt Head-/Nut Design: Inner rectangle
- for OE number: 93198205
- Manufacturer: DELLO AUTOMEGA
- Pikkus (mm): 17
- Välisläbimõõt [mm]: 22
-
Väliskeerme mõõde: M16 x 1,
5 - Keermepikkus (mm): 13
- Võtmekaugus: 8
- Kruvipea-/Mutriprofiil: sisenelikant
- Materjal: Metall
- Pealispind: tsingitud
- Kruvipikkus kruvipea all [mm]: 17
-
Kaal (kg): 0,
02 - Piirangutega toode/piirangu info 2: ilma rõngastihendita
-
Manufacturer: ENERGY-
NARZÊDZIA WARSZTATOWE
- Weight [kg]: 0.001
- Packaging length [cm]: 1.7
- Packaging width [cm]: 1.7
- Packaging height [cm]: 0.3
- Manufacturer: FEBEST
- Supplementary Article/Info 2: with seal ring
-
Thread Size: M 16 x 1,
50 x 12 - Length [mm]: 15.5
- Packing Type: Blister Pack
- Spanner Size: 8 x 8
-
Name: SULGURKRUVI,
OLIVANN - Manufacturer: COT
-
Thread Size: M16x1,
5x12 - Bolt Head-/Nut Design: Inner rectangle
-
Version: incl. 834.823,
incl. 813.052 - Supplementary Article/Info 2: with seal ring
- Manufacturer: ELRING
- Length [mm]: 14
-
External Thread Size: M16 x 1,
5 - Thread Length [mm]: 12
- Spanner Size: 8
- Bolt Head-/Nut Design: Inner rectangle
- Material: Steel
-
Surface: Zinc-
coated - Weight [kg]: 0.04
- Supplementary Article/Info 2: with seal ring
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Length [mm]: 14
-
External Thread Size: M16 x 1,
5 - Thread Length [mm]: 12
- Spanner Size: 8
- Bolt Head-/Nut Design: Inner rectangle
- Material: Steel
-
Surface: Zinc-
coated - Weight [kg]: 0.04
- Supplementary Article/Info 2: with seal ring
- Name: SW 60 10 1250
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Quantity per packing unit: 5
- Required quantity: 1
- Thread Length [mm]: 12
- Thread Pitch [mm]: 1.5
- Weight [kg]: 0.02
-
External Thread [mm]: M16 x 1,
5 -
Surface: Zinc-
coated - Spanner Size: 8
- Bolt Head-/Nut Design: Inner rectangle
- Supplementary Article/Info 2: with seal ring
- Fitting Position: engine sided
-
Thread Size: M16 x 1,
5 - Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Materjal: Metall
-
Keermemõõt: M16x1,
5 - Pikkus (mm): 15
- Kruvipikkus kruvipea all [mm]: 12
- Kruvipea-/Mutriprofiil: sisenelikant
- Võtmekaugus: 8
- Piirangutega toode/piirangu info 2: koos rõngastihendiga
-
Materjal tihend: Vask,
Kumm/ metall -
Siseläbimõõt [mm]: 16,
16, 7 -
Välisläbimõõt [mm]: 22,
24 -
Jämedus/Tugevus (mm): 2,
1, 5 - Konteineri tüüp: Kott
- Manufacturer: METZGER
- Quantity per packing unit: 10
- Inner Diameter [mm]: 16.7
- Outer Diameter [mm]: 24
- Thickness [mm]: 1.5
- Shape: A Shape
- Gasket Design: Metal Elastomer Gasket
- Alternatively:
- Quantity per packing unit: 100
- Inner Diameter [mm]: 16.7
- Outer Diameter [mm]: 24
- Thickness [mm]: 1.5
- Shape: A Shape
- Gasket Design: Metal Elastomer Gasket
- Manufacturer: FISCHER
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks