• Required quantity: 1
• Manufacturer Restriction: für Heizkörper, für Verdampfer
• Number of pins: 2
• Guarantee: 3 years guarantee
• Weight [kg]: 0.01
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV695

• for OE number: 13 62 7 525 014
• Sensor Type: Hall Sensor
• Number of pins: 3
• Fitting Depth [mm]: 28
• Supplementary Article/Info 2: without cable
• Connector Shape: oval
• Number of mounting bores: 1
• Fabrication Number: ECP-BM-005
• Manufacturer: NTY

• Engine Code: B48 A20 A
• Fitting Position: Upper
• Thread Size: M12x1,5
• Spanner Size: 17
• Manufacturer: FACET

• Engine Code: B48 A20 A
• Fitting Position: Upper
• Thread Size: M12x1,5
• Spanner Size: 17
• Name: EP 1.830.405
• Manufacturer: EPS

• Engine Code: B48 A20 A
• Manufacturer: FACET

• Engine Code: B48 A20 A
• Name: DETONATSIOONIANDUR
• Manufacturer: EPS

• Sensor Type: Hall Sensor
• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Required quantity: 2
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Name: CZUJNIK POO½ENIA WAKA ROZRZ. BMW 1 E81
• Manufacturer: BRM

• Engine Code: B48 A20 A, B46 A20 A
• Construction Year from: 10.2014
• Construction Year to: 10.2020
• Manufacturer: BOSCH

• Engine Code: B48 A20 A, B46 A20 A
• Block Separation:
• Sensor Type: Piezoelectric Sensor
• Number of pins: 2
• Name: CZUJNIK SPALANIA STUKOWEGO BMW 1 11-
• Manufacturer: MEY

• Fabrication Number: ECM-BM-015
• Manufacturer: NTY

• Height [mm]: 27.9
• Sensor Type: Hall Sensor
• Number of connectors: 3
• Manufacturer: VERNET

• Number of pins: 3
• Pressure from [kPA]: 20
• Name: CZUJNIK CI—N. POWIETRZA BMW 1, 2, 3, 4, 5 2,0 13-
• Manufacturer: DLP

• Fitting Position: Intake Manifold
• Number of pins: 3
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of pins: 3
• Colour: black
• Connector Shape: oval
• Fabrication Number: ECS-BM-006
• Manufacturer: NTY

Exhaust System: for vehicles with factory fitted soot -/particulate filter

• Number of pins: 3
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Sensor Type: Hall Sensor
• Number of mounting bores: 1
• Fitting Depth [mm]: 28
• for OE number: 13627525014
• Manufacturer: MEAT & DORIA

• Required quantity: 2
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with seal ring
• Assy./disassy. by qualified personnel required!:
• Name: Andur,Nukkvollipositsioon
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Emission Standard: Euro 6
• Fitting Position: before soot particulate filter
• Number of pins: 3
• Number of connectors: 2
• Supplementary Article/Info 2: without connection line
• Guarantee: 3 years guarantee
• Weight [kg]: 0.04
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

Exhaust System: for vehicles with factory fitted soot -/particulate filter

• Engine Code: B48 A20 A, B46 A20 A
• Construction Year from: 10.2014
• Construction Year to: 10.2020
• Name: BS 0986280777
• Manufacturer: BOSCH

• Construction Year from: 10.2014
• Voltage [V]: 12
• Housing Type: without housing
• Number of pins: 4
• Guarantee: 3 years guarantee
• New Part:
• Used part return not required:
• Weight [kg]: 0.07
• Always compare old and new part (in particular OE No.):
• Name: CE 07SKV334
• Manufacturer: ESEN SKV

• Required quantity: 2
• Sensor Type: Hall Sensor
• Number of pins: 3
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Manufacturer: VALEO
• Name: VA 366149

• Number of pins: 3
• Housing Colour: black
• Sensor Type: Hall Sensor
• Manufacturer: VDO

• Fabrication Number: EPP-BM-018
• Manufacturer: NTY

• Number of pins: 3
• Supplementary Article/Supplementary Info: with gasket/seal
• Colour: black
• Material: Plastic
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Required quantity: 2
• Number of pins: 3
• Fitting Depth [mm]: 27.8
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: TRI

• Fabrication Number: ECM-BM-012
• Supplementary Article/Info 2: with seal ring
• Number of pins: 4
• for OE number: 13628637897
• Manufacturer: NTY

• Construction Year from: 07.2019
• Oxygen Sensor: Diagnostic Probe, Broadband oxygen sensor, Heated
• Fitting Position: after catalytic converter
• Cable Length [mm]: 700
• Name: SONDA LAMBDA BMW 1, 2, X1, X2 13-
• Manufacturer: DLP

• Engine Code: B48 A20 A, B46 A20 A
• Construction Year from: 12.2014
• Construction Year to: 06.2018
• Supplementary Article/Info 2: High Pressure Side
• Fuel Mixture Formation: Direct Injection
• Name: ANDUR,KšTUSEROHK
• Manufacturer: BOS

• Sensor Type: Hall Sensor
• Number of pins: 3
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: B48 A20 A
• Construction Year from: 10.2014
• Oxygen Sensor: Diagnostic Probe
• Voltage [V]: 12
• Fitting Position: after catalytic converter
• Cable Length [mm]: 642
• Number of pins: 4
• Guarantee: 3 years guarantee
• Weight [kg]: 0.12
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Number of pins: 4
• Connector Shape: oval
• Manufacturer: KAMOKA

• Engine Code: B48 A20 A, B46 A20 A
• Construction Year from: 10.2014
• Construction Year to: 11.2014
• Supplementary Article/Info 2: High Pressure Side
• Fuel Mixture Formation: Direct Injection
• Name: ANDUR,KšTUSEROHK
• Manufacturer: BOS

Manufacturer: MAGNETI MARELLI

• Emission Standard: Euro 6
• Fitting Position: before soot particulate filter
• Supplementary Article/Info 2: without connection line
• Number of connectors: 2
• Number of pins: 3
• Manufacturer: METZGER

Exhaust System: for vehicles with factory fitted soot -/particulate filter

• Fitting Position: after catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Oxygen Sensor: Planar probe, Heated, Thread pre-greased
• Supplementary Article/Info 2: without plug
• Cable Length [mm]: 210
• Number of circuits: 4
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: B48 A20 A
• Construction Year from: 07.2018
• Construction Year to: 10.2020
• Supplementary Article/Info 2: High Pressure Side
• Fuel Mixture Formation: Direct Injection
• Name: ANDUR,KšTUSEROHK
• Manufacturer: BOS

• Pressure hose connector diameter [mm]: 5, 6.5
• Length [m]: 1
• Material: Silicone
• Chemical Properties: Oil resistant
• Temperature range from [°C]: -40
• Temperature range to [°C]: +350
• Clamping Range from [mm]: 10, 11, 11.5, 12.5
• Clamping Range to [mm]: 12.5, 13.5, 14, 15
• SVHC: No SVHC present!
• Manufacturer: HBE

Exhaust System: for vehicles with factory fitted soot -/particulate filter Supplementary Article/Info 2: with connection line, with protection hose, with marten protection, with clamps Technical Information: Using this repair kit, defective connecting hoses between the diesel particle filter (DPF) and the differential pressure sensor can be quickly and simply replaced. Pine marten bites may also be responsible for damage, and not just mechanical and thermic influences. That's why this set is supplied with protective hoses that are resistant to both high temperatures and pine marten bites. They protect the silicone pressure lines from external influences. The spring band clamps included in the scope of supply ensure that the hoses are held securely. Name: Remondikomplekt, survetorustik (tahma-/partiklifilter)

• Number of pins: 3
• Sensor Type: Hall Sensor
• Guarantee: 5 years guarantee
• General Information: Sold in Hueco brand: printing and packaging
• Manufacturer: HUCO

• Engine Code: B48 A20 A
• Construction Year from: 10.2014
• Construction Year to: 11.2014
• Fuel Mixture Formation: Direct Injection
• Manufacturer Restriction: Hochdruckseite
• Version: IAM
• Manufacturer: METZGER

• Oxygen Sensor: Diagnostic Probe, Planar probe, Heated
• Fitting Position: after catalytic converter
• Cable Length [mm]: 530
• Name: DE ES21375-12B1
• Manufacturer: DELPHI

• Engine Code: B46 A20 A, B48 A20 A
• Colour: black
• Number of pins: 3
• Supplementary Article/Supplementary Info: without gasket/seal
• Manufacturer: VDO

• Oxygen Sensor: Regulating Probe, Broadband oxygen sensor, Heated
• Fitting Position: before catalytic converter
• Cable Length [mm]: 670
• Name: DE ES21122-12B1
• Manufacturer: DELPHI

• Engine Code: B48 A20 A
• Construction Year from: 07.2018
• Construction Year to: 10.2020
• Guarantee: 3 years guarantee
• New Part:
• Used part return not required:
• Weight [kg]: 0.07
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV ESEN

• Engine Code: B48 A20 A, B46 A20 A
• Construction Year from: 10.2014
• Construction Year to: 06.2018
• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Engine Code: B48 A20 A, B46 A20 A
• Construction Year from: 10.2014
• Construction Year to: 06.2018
• Oxygen Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 5
• Overall Length [mm]: 670
• Recommended change interval [km]: 250,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Oxygen Sensor: Regulating Probe, Oxygen Sensor
• Engine Code: B48 A20 A, B46 A20 A
• Construction Year from: 10.2014
• Construction Year to: 06.2018
• Fitting Position: before catalytic converter
• Guarantee: 3 years guarantee
• Weight [kg]: 0.15
• Always compare old and new part (in particular OE No.):
• Technical Information: Universal
• Name: CE 09SKV915
• Manufacturer: ESEN SKV

• Engine Code: B48 A20 A
• Construction Year from: 07.2018
• Construction Year to: 10.2020
• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 630
• Manufacturer: BOSCH

• Housing Type: without housing
• Number of pins: 4
• Plug Type: Male
• Housing Colour: black/silver
• Voltage [V]: 12
• Recommended additional repairs: Air Filter
• Name: Ohumassimootja
• Manufacturer: DLP
• Lisainfo: AF10420-12B1
• Additional information: AF10420-12B1

• Engine Code: B48 A20 A
• Construction Year from: 07.2018
• Construction Year to: 10.2020
• Recommended additional repairs: Air Filter
• Name: OHUMASSIMOOTJA
• Manufacturer: BOS

• Engine Code: B46 A20 A, B48 A20 A
• Operating Mode: Electric
• Voltage [V]: 12
• for OE number: 13 62 8 583 496
• Manufacturer: PIERBURG

• Engine Code: B48 A20 A
• Construction Year from: 07.2018
• Construction Year to: 10.2020
• Oxygen Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 5
• Overall Length [mm]: 677
• Manufacturer: BOSCH

• Resistor Type: Hot-wire Sensor
• Number of connectors: 4
• Supplementary Article/Supplementary Info: with gasket/seal
• Weight [kg]: 0.04
• Housing Type: without housing
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: B48 A20 A, B46 A20 A
• Construction Year from: 10.2014
• Construction Year to: 06.2018
• Recommended additional repairs: Air Filter
• Name: OHUMASSIMOOTJA
• Manufacturer: BOS

• Construction Year from: 10.2014
• General Information: Sold in Hitachi brand: printing and packaging
• Manufacturer: HITACHI

• Construction Year from: 10.2014
• Guarantee: 5 years guarantee
• General Information: Sold in Hueco brand: printing and packaging
• Manufacturer: HITACHI

• Engine Code: B48 A20 A
• Construction Year from: 07.2018
• Construction Year to: 10.2020
• Number of pins: 4
• New Part:
• Used part return not required:
• for OE number: 13628583496
• Manufacturer: METZGER

• Required quantity: 2
• Sensor Type: Hall Sensor
• Mounting Type: Screw Connection
• Shape: oval
• Number of pins: 3
• Fitting Depth [mm]: 28
• Supplementary Article/Info 2: with seal ring