Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Keermemõõt: M12 x 1,
5 - Kogupikkus [mm]: 50
- Manufacturer: 3RG
- Quantity per packing unit: 4
- Length [mm]: 50
-
Thread Size: M12 x 1,
5 mm - Spanner Size: 17
- Wheel Fastening: Conical Seat F
- Weight [kg]: 0.07
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Rims: for light alloy rims,
for steel rims - Length [mm]: 49
- Outer Diameter [mm]: 23
-
External Thread Size: M12 x 1,
5 - Thread Length [mm]: 23
- Quality/ Grade: 8.8
- Spanner Size: 17
- Bolt Head-/Nut Design: Male Hex
- Wheel Fastening: Conical Seat F
- Material: Steel
- Screw length below head [mm]: 26
-
Fitting Position: Front Axle,
Rear Axle - Weight [kg]: 0.07
- Observe service information:
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Rims: for light alloy rims,
for steel rims - Length [mm]: 49
- Outer Diameter [mm]: 23
-
External Thread Size: M12 x 1,
5 - Thread Length [mm]: 23
- Quality/ Grade: 8.8
- Spanner Size: 17
- Bolt Head-/Nut Design: Male Hex
- Wheel Fastening: Conical Seat F
- Material: Steel
- Screw length below head [mm]: 26
-
Fitting Position: Front Axle,
Rear Axle - Weight [kg]: 0.07
- Observe service information:
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Quantity per packing unit: 6
- Installatsiooni pool: ees ja taga
-
Kaal (kg): 0,
059 - Väliskeere [mm]: M12x150
- Võtmekaugus: 17
- Kruvipea-/Mutriprofiil: Väliskuuskant
- Kaal (g): 59
- Keermepikkus (mm): 26
- Manufacturer: METALCAUCHO
- Quantity per packing unit: 20
- for OE number: 36 13 1 095 390
- Length [mm]: 23
-
Thread Size: M12 x 1,
5 - Spanner Size: 19
- Manufacturer: TRUCKTEC
- Quantity per packing unit: 20
- Length [mm]: 47
-
External Thread [mm]: M14X1,
25 - Spanner Size: 17
- Thread Length [mm]: 23
-
Quality/ Grade: 8,
8 - Weight [kg]: 0.068
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Rims: for light alloy rims,
for steel rims - Length [mm]: 47
- Outer Diameter [mm]: 22.8
-
External Thread Size: M14 x 1,
25 - Thread Length [mm]: 23
- Quality/ Grade: 8.8
- Spanner Size: 17
- Bolt Head-/Nut Design: Male Hex
- Wheel Fastening: Conical Seat F
- Material: Steel
- Screw length below head [mm]: 28
-
Fitting Position: Rear Axle,
Front Axle - Weight [kg]: 0.067
- Observe service information:
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Rims: for light alloy rims,
for steel rims - Length [mm]: 47
- Outer Diameter [mm]: 22.8
-
External Thread Size: M14 x 1,
25 - Thread Length [mm]: 23
- Quality/ Grade: 8.8
- Spanner Size: 17
- Bolt Head-/Nut Design: Male Hex
- Wheel Fastening: Conical Seat F
- Material: Steel
- Screw length below head [mm]: 28
-
Fitting Position: Rear Axle,
Front Axle - Weight [kg]: 0.067
- Observe service information:
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Rims: for light alloy rims,
for steel rims - Length [mm]: 47
- Outer Diameter [mm]: 22.8
-
External Thread Size: M14 x 1,
25 - Thread Length [mm]: 23
- Quality/ Grade: 8.8
- Spanner Size: 17
- Bolt Head-/Nut Design: Male Hex
- Wheel Fastening: Conical Seat F
- Material: Steel
- Screw length below head [mm]: 28
-
Fitting Position: Rear Axle,
Front Axle - Weight [kg]: 0.067
- for OE number: 36 13 6 890 324
- Observe service information:
- Name: SW 20 92 6744
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Length [mm]: 51
- Outer Diameter [mm]: 23.7
-
External Thread Size: M14 x 1,
25 - Thread Length [mm]: 23
- Quality/ Grade: 8.8
-
Spanner Size: 17,
19 - Wheel Fastening: Conical Seat F
- Material: Steel
- Screw length below head [mm]: 25
-
Fitting Position: Front Axle,
Rear Axle - Weight [kg]: 0.35
- Lockable: Lockable
- Observe service information:
- Manufacturer: FEBI BILSTEIN
- Additional information: F47550
- Lisainfo: F47550
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Length [mm]: 56.5
- Outer Diameter [mm]: 23.5
-
External Thread Size: M12 x 1,
5 - Thread Length [mm]: 25.5
- Quality/ Grade: 8.8
-
Spanner Size: 17,
19 - Wheel Fastening: Conical Seat F
- Material: Steel
-
Surface: Zinc-
coated - Screw length below head [mm]: 30
-
Fitting Position: Front Axle,
Rear Axle - Weight [kg]: 0.45
- Lockable: Lockable
- Observe dimensions:
- Observe service information:
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Length [mm]: 51
- Outer Diameter [mm]: 23.7
-
External Thread Size: M14 x 1,
25 - Thread Length [mm]: 23
- Quality/ Grade: 8.8
-
Spanner Size: 17,
19 - Wheel Fastening: Conical Seat F
- Material: Steel
- Screw length below head [mm]: 25
-
Fitting Position: Front Axle,
Rear Axle - Lockable: Lockable
- Observe service information:
- Name: SW 20 94 7550
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Length [mm]: 56.5
- Outer Diameter [mm]: 23.5
-
External Thread Size: M12 x 1,
5 - Thread Length [mm]: 25.5
- Quality/ Grade: 8.8
-
Spanner Size: 17,
19 - Wheel Fastening: Conical Seat F
- Material: Steel
-
Surface: Zinc-
coated - Screw length below head [mm]: 30
-
Fitting Position: Front Axle,
Rear Axle - Weight [kg]: 0.45
- Observe dimensions:
- Lockable: Lockable
- Observe service information:
- Name: SW 20 92 7049
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks