• Fitting Position: Rear Axle both sides
• Inner Diameter [mm]: 79
• Width [mm]: 13.1
• Outer Diameter [mm]: 83
• Number of Teeth: 48
• Name: ANDUR,ABS
• Manufacturer: MAX
• Lisainfo: 27-0296
• Additional information: 27-0296

• Outer Diameter [mm]: 83
• Fitting Position: Rear Axle both sides
• Width [mm]: 13
• Number of Teeth, ABS ring: 48
• Inner Diameter [mm]: 79
• Weight [kg]: 0.026
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Rear Axle both sides
• Inner Diameter [mm]: 79
• Width [mm]: 13.1
• Outer Diameter [mm]: 83
• Number of Teeth, ABS ring: 48
• Name: ANDUR,ABS
• Manufacturer: TRI
• Lisainfo: FORD, SEAT, VOLKSWAGEN
• Additional information: FORD, SEAT, VOLKSWAGEN

• Fitting Position: Front Axle Left, Front Axle Right
• Length [mm]: 660
• Supplementary Article/Info 2: with cable
• Fabrication Number: HCA-BM-023
• Manufacturer: NTY

• Fitting Position: Rear Axle Left, Rear Axle Right
• Fabrication Number: HCA-BM-024
• Manufacturer: NTY
• Name: NTY HCA-BM-024

• Length [mm]: 954
• MAPP code available:
• Fitting Position: Rear Axle Left, Rear Axle Right
• Fabrication Number: HCA-BM-032

• Fitting Position: Front Axle Left, Front Axle Right
• Fabrication Number: HCA-BM-031
• Manufacturer: NTY

• Fitting Position: Front Axle
• Sensor Type: Hall Sensor
• Number of pins: 2
• Cable Length [mm]: 585
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Construction Year to: 03.2007
• Required quantity: 2
• Fitting Position: Rear Axle
• Vehicle Equipment: for vehicles with active steering
• Length [mm]: 954
• Manufacturer: DENCKERMANN FILTRY

• Fitting Position: Front Axle Left, Front Axle Right
• Sensor Type: Active sensor
• Length [mm]: 660
• Socket colour: grey

• Fitting Position: Rear Axle
• Sensor Type: Hall Sensor
• Number of pins: 2
• Cable Length [mm]: 880
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Fitting Position: Rear Axle Left, Rear Axle Right
• Sensor Type: Active sensor
• Length [mm]: 954
• Socket colour: grey
• Manufacturer: JP GROUP

• Construction Year to: 03.2007
• Required quantity: 2
• Fitting Position: Front Axle
• Vehicle Equipment: for vehicles without active steering
• Length [mm]: 660
• Manufacturer: DENCKERMANN FILTRY

• Engine Code: N46 B20 C, N46 B20 B, N46 B20 CC, N46 B20 BD
• Fitting Position: Rear Axle
• Sensor Type: Active sensor
• Supplementary Article/Info 2: with cable
• Overall Length [mm]: 985
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: MAX

• Fitting Position: Front Axle
• Cable Length [mm]: 660
• for OE number: 34526762465
• Number of pins: 2
• Number of mounting bores: 1
• Manufacturer: MAGNETI MARELLI
• Name: MM MWSS054

• Construction Year to: 03.2007
• Fitting Position: Front Axle
• Required quantity: 2
• Vehicle Equipment: for vehicles with active steering
• Length [mm]: 660
• Manufacturer: DENCKERMANN FILTRY

• Sensor Type: Active sensor
• Number of pins: 2
• Cable Length [mm]: 585
• Fitting Position: Front Axle Right, Front Axle Left
• Manufacturer: AUTOFREN SEINSA
• Name: SE DS0072

• Engine Code: N46 B20 C
• Vehicle Equipment: for vehicles without active steering
• Fitting Position: Rear Axle Left, Rear Axle Right
• Supplementary Article/Info 2: with cable
• Length [mm]: 990
• Braking/Drive Dynamics: for vehicles with ABS
• Manufacturer: TOPRAN
• Lisainfo: 501 078 HP
• Additional information: 501 078 HP

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Construction Year to: 03.2007
• Fitting Position: Rear
• Length [mm]: 890
• Number of pins: 2
• Connector Shape: round
• Voltage [V]: 12
• Weight [kg]: 0.1
• Colour: grey
• Operating Mode: Electric
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 06SKV070

• for OE number: 34 52 6 762 465
• Fitting Position: Front Axle both sides
• Manufacturer: TRUCKTEC

• for OE number: 34 52 6 760 425
• Fitting Position: Rear Axle both sides
• Manufacturer: TRUCKTEC

• Construction Year to: 03.2007
• Fitting Position: Front
• Length [mm]: 600
• Number of pins: 2
• Connector Shape: round
• Voltage [V]: 12
• Weight [kg]: 0.09
• Colour: grey
• Operating Mode: Electric
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 06SKV073

• Fitting Position: Front Axle
• Vehicle Equipment: for vehicles without active steering
• Sensor Type: Active sensor
• Number of occupied pins: 2
• Cable Length [mm]: 655
• Name: DE SS20216
• Manufacturer: DELPHI

• Fitting Position: Rear Axle, Rear Axle Right, Rear Axle Left
• Manufacturer: AUTO-GH

• Construction Year to: 03.2007
• Fitting Position: Rear
• Length [mm]: 890
• Number of pins: 2
• Connector Shape: round
• Voltage [V]: 12
• Weight [kg]: 0.09
• Colour: grey
• Operating Mode: Electric
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 06SKV078

• Required quantity: 2
• Fitting Position: Rear Axle
• Supplementary Article/Info 2: with cable
• Name: CZUJNIK ABS BMW T. 3 E90-E93
• Manufacturer: BRM

• Sensor Type: Active sensor
• Cable Length [mm]: 870
• Number of pins: 2
• Fitting Position: Rear Axle Right, Rear Axle Left
• Manufacturer: AUTOFREN SEINSA
• Name: SE DS0069

• Fitting Position: Front Axle Left, Front Axle Right
• Cable Length [mm]: 650
• Sensor Type: Hall Sensor
• Alternatively:
• Number of pins: 2
• Fitting Depth [mm]: 31
• Alternative Repair Kit: 560144
• Manufacturer: ERA

• Required quantity: 2
• Fitting Position: Front Axle
• Supplementary Article/Info 2: with cable
• Manufacturer: BREMI

• Fitting Position: Front
• Length [mm]: 610
• Number of pins: 2
• Connector Shape: round
• Voltage [V]: 12
• Weight [kg]: 0.08
• Colour: grey
• Operating Mode: Electric
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 06SKV003

• Fitting Position: Front Axle
• Construction Year to: 03.2007
• Vehicle Equipment: for vehicles with active steering
• Cable Length [mm]: 580
• Sensor Type: Active sensor
• Manufacturer: OPTIMAL ZAWIESZENIE

• Vehicle Equipment: for vehicles without active steering
• Fitting Position: Rear Axle Left, Rear Axle Right
• Braking/Drive Dynamics: for vehicles with ABS
• Rated Voltage [V]: 12
• Supplementary Article/Info 2: with cable
• Housing Colour: grey
• Length [mm]: 985
• Height [mm]: 30
• Required quantity: 2
• Cable Length [mm]: 870
• Sensor Type: Hall Sensor, Active sensor
• Number of pins: 2
• Weight [kg]: 0.062
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front Axle, Rear Axle, Left, Right
• Manufacturer Restriction: BMW
• Number of pins: 2
• Cable Length [mm]: 200
• Cable Cross Section [mm²]: 0.75
• Contact surface: Tin-plated
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Cable insulation material: Silicone
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Plug housing design: Plug sleeve housing
• SVHC: No SVHC present!
• Name: Kaabli remondikomplekt, rattap””rete andur
• Manufacturer: HBE

• Braking/Drive Dynamics: for vehicles with DSC
• Length [mm]: 690
• Number of connectors: 2
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.055
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: N46 B20 C, N46 B20 B, N46 B20 CC, N46 B20 BD
• Fitting Position: Front Axle
• Sensor Type: Active sensor
• Supplementary Article/Info 2: with cable
• Overall Length [mm]: 690
• Temperature range from [°C]: -40
• Temperature range to [°C]: 150
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: BOS

• Construction Year to: 03.2007
• Vehicle Equipment: for vehicles without active steering
• Fitting Position: Front Axle Left, Front Axle Right
• Length [mm]: 860
• Braking/Drive Dynamics: for vehicles with ABS
• Rated Voltage [V]: 12
• Required quantity: 2
• Cable Length [mm]: 660
• Sensor Type: Hall Sensor
• Number of pins: 2
• Supplementary Article/Info 2: with cable
• Weight [kg]: 0.052
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Rear Axle
• Quantity: 2
• Sensor Type: Active sensor
• Number of occupied pins: 2
• Cable Length [mm]: 935
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: DLP
• Quality class: PJ

• Construction Year to: 03.2007
• Fitting Position: Front Axle
• Warranty: 5 years warranty
• Manufacturer: HUCO

• Fitting Position: Front Axle
• Required quantity: 2
• Cable Length [mm]: 585
• Fitting Depth [mm]: 31
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: TRI

• Engine Code: N46 B20 C, N46 B20 B, N46 B20 CC, N46 B20 BD
• Fitting Position: Rear Axle
• Sensor Type: Active sensor
• Supplementary Article/Info 2: with cable
• Overall Length [mm]: 985
• Temperature range from [°C]: -40
• Temperature range to [°C]: 150
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: BOS

• Construction Year to: 03.2007
• Required quantity: 2
• Fitting Position: Rear Axle
• Vehicle Equipment: for vehicles without active steering
• Length [mm]: 954
• MAPP code available:
• Manufacturer: ATE

• Fitting Position: Rear Axle Left, Rear Axle Right
• Number of pins: 2
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Rear Axle
• Sensor Type: Active sensor
• Overall Length [mm]: 985
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Engine Code: N46 B20 C
• Fitting Position: Rear Axle Left, Rear Axle Right
• Required quantity: 2
• Cable Length [mm]: 962
• Sensor Length [mm]: 31
• Name: EP 1.960.077
• Manufacturer: EPS

• Fitting Position: Front Axle
• Sensor Type: Active sensor
• Overall Length [mm]: 690
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Vehicle Equipment: for vehicles without active steering
• Payload: not for increased payload
• Length [mm]: 985
• Number of connectors: 2
• Fitting Position: Rear Axle Left, Rear Axle Right
• Weight [kg]: 0.065
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: N46 B20 BD
• Fitting Position: Rear Axle
• Cable Length [mm]: 962
• Sensor Length [mm]: 31
• Name: EP 1.960.193
• Manufacturer: EPS

• Fitting Position: Rear Axle
• Required quantity: 2
• Cable Length [mm]: 940
• Fitting Depth [mm]: 30.9
• Number of pins: 2
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: TRI

• Sensor Type: Active sensor
• Cable Length [mm]: 855
• Number of pins: 2
• Fitting Position: Rear Axle
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: MEY

• Required quantity: 2
• Voltage [V]: 12
• Cable Length [mm]: 858
• Sensor Type: Hall Sensor
• Fitting Position: Front Axle
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PU012039761
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Sensor Type: Active sensor
• Cable Length [mm]: 660
• Number of pins: 2
• Fitting Position: Front Axle
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: MEY

• Construction Year to: 03.2007
• Required quantity: 2
• Fitting Position: Front Axle
• Vehicle Equipment: for vehicles without active steering
• Length [mm]: 660
• MAPP code available:
• Manufacturer: ATE

• Number of pins: 2
• Connector Shape: round
• Supplementary Article/Info 2: with ABS sensor ring
• Quantity Unit: Set
• Cable Length [mm]: 870
• Number of Teeth, ABS ring: 48
• Fitting Position: Rear Axle
• Rated Voltage [V]: 12
• Sensor Type: Inductive Sensor
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Vehicle Equipment: for vehicles without active steering
• Cable Length [mm]: 690
• Sensor Type: Hall Sensor
• Fitting Position: Front Axle Left, Front Axle Right
• Article number of recommended accessories: 2324064
• Manufacturer: METZGER