• Weight [kg]: 0.043
• Inner Diameter [mm]: 13
• Outer Diameter [mm]: 28
• Height [mm]: 20.5
• Manufacturer: 3RG

• Length [mm]: 20.5
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 28
• Material: Rubber/Metal
• Fitting Position: Front
• Weight [kg]: 0.044
• Name: PUKS,PIKIVOLL
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear
• Length [mm]: 20
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 28
• Mounting Type: hard version
• Weight [kg]: 0.031
• Name: PUKS,PIKIVOLL
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for OE number: 26 11 7 511 454
• Fitting Position: Front
• Thickness [mm]: 30
• Material: Rubber/Metal
• Inner Diameter [mm]: 50
• Outer Diameter [mm]: 135
• Number of Holes: 6
• Bolt Hole Circle Ø [mm]: 96
• Observe service information:
• Fabrication Number: NPE-BM-005
• Manufacturer: NTY

• Transmission Type: Automatic Transmission
• Bolt Hole Circle Ø [mm]: 96
• Material: Rubber/Metal
• Number of Holes: 6
• Fitting Position: Front
• for OE number: 26 11 7 511 454
• Outer Diameter [mm]: 135
• Inner Diameter [mm]: 50
• Thickness [mm]: 30
• Name: LIIGEND,PIKIVOLL
• Manufacturer: MAX

• Transmission Type: Automatic Transmission
• Fitting Position: Rear
• Supplementary Article/Supplementary Info: without attachment material
• Joint Type: Disc Joint
• Quantity Unit: Piece
• Name: LIIGEND,PIKIVOLL
• Manufacturer: MAX

• Fitting Position: Front
• for OE number: 12 20 843
• Manufacturer: GSP

Fabrication Number: NPE-BM-013

• Transmission Type: Manual Transmission
• Fitting Position: Front and Rear
• Supplementary Article/Supplementary Info: without attachment material
• Joint Type: Disc Joint
• Name: LIIGEND,PIKIVOLL
• Manufacturer: MAX
• Lisainfo: 49-0969
  Läbimõõt 140 mm
• Additional information: 49-0969
  Läbimõõt 140 mm

• Outer Diameter [mm]: 135
• Inner Diameter [mm]: 50
• Thickness [mm]: 30
• Bolt Hole Circle Ø [mm]: 96
• Notches/Holes Number: 6
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Width [mm]: 30
• Weight [kg]: 0.55
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 132
• Bolt Hole Circle Ø [mm]: 96
• Weight [g]: 550
• Manufacturer: METALCAUCHO

• Transmission Type: Automatic Transmission
• Material: Rubber/Metal
• Thickness [mm]: 30
• Inner Diameter [mm]: 50
• Outer Diameter [mm]: 135
• Number of Holes: 6
• Bolt Hole Circle Ø [mm]: 96
• Name: Propeller shaft joint
• Quality class: PJ

Lisainfo: "Tootja: SRL
BMW 7 E38, 94-
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
BMW 7 E38, 94-
(kvaliteediklass: PJ)"

• Fabrication Number: NPE-BM-001
• Manufacturer: NTY

• Fitting Position: Rear Axle, Rear
• Required quantity: 1
• Bolt Hole Circle Ø [mm]: 96
• Name: Liigend,pikivoll
• Manufacturer: TED
• Additional information: TED11299
• Lisainfo: TED11299

• Fitting Position: Front, Rear
• for OE number: 26 11 7 546 425
• Manufacturer: GSP

• Engine Code: N47 D20 A
• Fitting Position: Rear, Front
• Block Separation:
• Construction Year to: 10.2010
• Joint Type: Disc Joint
• Number of Holes: 6
• Outer Diameter [mm]: 143
• Bolt Hole Circle Ø [mm]: 105
• Manufacturer: TOPRAN

Transmission Type: 5-Speed Automatic Transmission, Manual Transmission General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front, Rear
• Required quantity: 2
• Bolt Hole Circle Ø [mm]: 105
• Inner Diameter [mm]: 55
• Supplementary Article/Supplementary Info: with attachment material
• Joint Type: Disc Joint
• Manufacturer: TEDGUM
• Name: TG 00081948

• Transmission Type: Automatic Transmission
• Thickness [mm]: 30
• Inner Diameter [mm]: 50
• Outer Diameter [mm]: 132
• Bolt Hole Circle Ø [mm]: 96
• Material: Rubber/Metal
• Number of Holes: 6
• Weight [kg]: 0.49
• Observe service information:
• Name: LIIGEND,PIKIVOLL
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Transmission Type: Automatic Transmission
• Thickness [mm]: 30
• Inner Diameter [mm]: 50
• Outer Diameter [mm]: 132
• Bolt Hole Circle Ø [mm]: 96
• Material: Rubber/Metal
• Number of Holes: 6
• Weight [kg]: 0.49
• for OE number: 26 11 7 511 454
• Observe service information:
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Inner Diameter [mm]: 12
• Required quantity: 1
• Name: LIIGEND,PIKIVOLL
• Manufacturer: TED

• Transmission Type: Automatic Transmission
• Outer Diameter [mm]: 126
• Bolt Hole Circle Ø [mm]: 96
• Number of Holes: 6
• Fitting Position: Rear
• Weight [kg]: 0.635
• Observe service information:
• Name: LIIGEND,PIKIVOLL
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Transmission Type: Automatic Transmission
• Engine Code: N 47
• Height [mm]: 30
• Weight [kg]: 0.63
• Outer Diameter [mm]: 126
• Bolt Hole Circle Ø [mm]: 96
• Joint Type: Disc Joint
• Supplementary Article/Supplementary Info: without attachment material
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Transmission Type: Automatic Transmission
• Outer Diameter [mm]: 126
• Bolt Hole Circle Ø [mm]: 96
• Number of Holes: 6
• Fitting Position: Rear
• Weight [kg]: 0.635
• Observe service information:
• Manufacturer: SWAG
• Name: SW 20 92 6332

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Transmission Type: Automatic Transmission
• Length [mm]: 61
• Thickness [mm]: 30
• Inner Diameter [mm]: 50
• Outer Diameter [mm]: 135
• Bolt Hole Circle Ø [mm]: 96
• Material: Rubber/Metal
• Number of Holes: 6
• Supplementary Article/Supplementary Info: with nuts
• Supplementary Article/Info 2: with bolts/screws
• Fitting Position: Front
• Thread Size: M12 x 1,5
• Weight [kg]: 0.73
• Observe service information:
• Name: LIIGEND,PIKIVOLL
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front
• Transmission Type: Automatic Transmission
• Diameter [mm]: 132
• Supplementary Article/Supplementary Info: without attachment material
• Joint Type: Disc Joint
• Number of Holes: 6
• Bolt Hole Circle Ø [mm]: 96
• Quantity Unit: Piece
• Name: LIIGEND,PIKIVOLL
• Manufacturer: MEY
• Lisainfo: 3141523102/HD
• Additional information: 3141523102/HD

General Information: MEYLE-HD flex discs with higher durability thanks to reduced inner friction, optimised and innovative winding technique as well as improved thrust and traction characteristics.

• Bolt Hole Circle Ø [mm]: 105
• Number of Holes: 6
• Supplementary Article/Supplementary Info: with nuts
• Supplementary Article/Info 2: with bolts/screws
• Fitting Position: Rear
• Weight [kg]: 1.46
• Observe service information:
• Name: LIIGEND,PIKIVOLL
• Manufacturer: FEB
• Additional information: F43527
• Lisainfo: F43527

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Transmission Type: Manual Transmission
• Fitting Position: Front and Rear
• Thickness [mm]: 41
• Inner Diameter [mm]: 54
• Outer Diameter [mm]: 140
• Bolt Hole Circle Ø [mm]: 105
• Hole Spacing [mm]: 64
• Outer Diameter 2 [mm]: 21
• Weight [kg]: 0.921
• Inner Diameter 2 [mm]: 12
• Observe service information:
• Name: LIIGEND,PIKIVOLL
• Manufacturer: FEB
• Additional information: F26294
• Lisainfo: F26294

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Equipment: for vehicles with automatic transmission
• Fitting Position: Rear
• Diameter [mm]: 125
• Supplementary Article/Supplementary Info: without attachment material
• Joint Type: Disc Joint
• Number of Holes: 6
• Bolt Hole Circle Ø [mm]: 96
• Quantity Unit: Piece
• Name: Liigend,pikivoll
• Manufacturer: MEY

General Information: MEYLE-HD flex discs with optimised rubber compound tolerating temperatures up to 130°C. Enhanced performance thanks to reduced torque peaks, damping of wave length frequency and noise insulation.

• Fitting Position: Front
• Transmission Type: Automatic Transmission
• Diameter [mm]: 132
• Supplementary Article/Supplementary Info: with attachment material
• Joint Type: Disc Joint
• Number of Holes: 6
• Bolt Hole Circle Ø [mm]: 96
• Quantity Unit: Set
• Name: LIIGEND,PIKIVOLL
• Manufacturer: MEY

General Information: MEYLE-HD flex discs with higher durability thanks to reduced inner friction, optimised and innovative winding technique as well as improved thrust and traction characteristics.

• Transmission Type: Manual Transmission
• Bolt Hole Circle Ø [mm]: 105
• Number of Holes: 6
• Supplementary Article/Supplementary Info: with nuts
• Supplementary Article/Info 2: with bolts/screws
• Fitting Position: Front
• Weight [kg]: 1.4
• Observe service information:
• Name: LIIGEND,PIKIVOLL
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year to: 10.2010
• Vehicle Equipment: for vehicles with manual transmission
• Fitting Position: Front
• Diameter [mm]: 144
• Supplementary Article/Supplementary Info: without attachment material
• Joint Type: Disc Joint
• Number of Holes: 6
• Bolt Hole Circle Ø [mm]: 105
• Quantity Unit: Piece
• Name: Liigend,pikivoll
• Manufacturer: MEY

General Information: MEYLE-HD flex discs with optimised rubber compound tolerating temperatures up to 130°C. Enhanced performance thanks to reduced torque peaks, damping of wave length frequency and noise insulation.

• Transmission Type: Manual Transmission
• Bolt Hole Circle Ø [mm]: 105
• Number of Holes: 6
• Supplementary Article/Supplementary Info: with nuts
• Supplementary Article/Info 2: with bolts/screws
• Fitting Position: Front
• Observe service information:
• Name: SW 20 94 3482
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Bolt Hole Circle Ø [mm]: 105
• Number of Holes: 6
• Supplementary Article/Supplementary Info: with nuts
• Supplementary Article/Info 2: with bolts/screws
• Fitting Position: Rear
• Observe service information:
• Name: SW 20 94 3527
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year to: 10.2010
• Vehicle Equipment: for vehicles with manual transmission
• Fitting Position: Front
• Diameter [mm]: 144
• Supplementary Article/Supplementary Info: with attachment material
• Joint Type: Disc Joint
• Number of Holes: 6
• Bolt Hole Circle Ø [mm]: 105
• Quantity Unit: Set
• Name: Liigend,pikivoll
• Manufacturer: MEY

General Information: MEYLE-HD flex discs with optimised rubber compound tolerating temperatures up to 130°C. Enhanced performance thanks to reduced torque peaks, damping of wave length frequency and noise insulation.

• Vehicle Equipment: for vehicles with automatic transmission
• Fitting Position: Rear
• Diameter [mm]: 144
• Supplementary Article/Supplementary Info: with attachment material
• Joint Type: Disc Joint
• Number of Holes: 6
• Bolt Hole Circle Ø [mm]: 105
• Quantity Unit: Set
• Name: Liigend,pikivoll
• Manufacturer: MEY
• Lisainfo: 3141522113/HD
• Additional information: 3141522113/HD

General Information: MEYLE-HD flex discs with optimised rubber compound tolerating temperatures up to 130°C. Enhanced performance thanks to reduced torque peaks, damping of wave length frequency and noise insulation.

• Vehicle Equipment: for vehicles with automatic transmission
• Fitting Position: Rear
• Diameter [mm]: 125
• Supplementary Article/Supplementary Info: with attachment material
• Joint Type: Disc Joint
• Number of Holes: 6
• Bolt Hole Circle Ø [mm]: 96
• Quantity Unit: Set
• Name: Liigend,pikivoll
• Manufacturer: MEY

General Information: MEYLE-HD flex discs with higher durability thanks to reduced inner friction, optimised and innovative winding technique as well as improved thrust and traction characteristics.