• Fitting Position: Cylinder Head
• Thread Size: M 12x1,5
• Sensor Type: NTC Sensor
• Number of pins: 2
• Housing Colour: black
• Fabrication Number: ECT-BM-002
• Manufacturer: NTY

• Fabrication Number: ECT-BM-017
• Manufacturer: NTY

• Number of pins: 2
• Connector Shape: oval
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: N57 D30 A
• Housing Colour: black
• Number of pins: 2
• Connector Shape: oval
• Name: Andur,sisendohu temperatuur
• Manufacturer: MAX

• Number of pins: 2
• Housing Colour: black
• Manufacturer: DELPHI
• Name: DE TS10501

• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: MAG

• Engine Code: N57 D30 A
• Thread Size: M12x1,5
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Number of pins: 2
• Weight [kg]: 0.01
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Connector Shape: oval
• Fabrication Number: ECP-BM-003
• Manufacturer: NTY

• Material: Plastic
• Number of connectors: 3
• Fabrication Number: ECS-BM-001
• Manufacturer: NTY

Exhaust System: for vehicles with factory fitted soot -/particulate filter

• Number of pins: 3
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of pins: 2
• Assy./disassy. by qualified personnel required!:
• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Height [mm]: 28.4
• Sensor Type: Hall Sensor
• Number of connectors: 3
• Manufacturer: VERNET

• Engine Code: N57 D30 A
• Operating voltage [V]: 12
• Sensor Type: NTC Sensor
• Number of pins: 2
• Name: Andur,sisendohu temperatuur
• Manufacturer: MEY

• Engine Code: N57 D30 A
• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: EPS

• Engine Code: N57 D30 A
• Sensor Type: Active sensor
• Supplementary Article/Info 2: without cable
• Number of pins: 3
• Voltage [V]: 12
• Name: Andur,Nukkvollipositsioon
• Manufacturer: MAX

• Number of pins: 3
• Fabrication Number: ECS-BM-003
• Manufacturer: NTY

• Number of connectors: 3
• Material: Plastic
• Name: Andur, heitgaasisurve
• Manufacturer: MAX

• Number of connectors: 3
• Fabrication Number: ECS-BM-007
• Manufacturer: NTY

Manufacturer: VERNET

Manufacturer: MAGNETI MARELLI

• Voltage [V]: 12
• Number of pins: 2
• Connector Shape: oval
• Colour: black
• Supplementary Article/Supplementary Info: with seal
• Manufacturer: METZGER

• Number of pins: 3
• Connector Shape: oval
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Manufacturer: MEAT&DORIA

• Number of pins: 3
• for OE number: 1362 7 805 152
• Manufacturer: TOPRAN

Exhaust System: for vehicles with factory fitted soot -/particulate filter General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• for OE number: 13 62 7 804 742, 89420 WA010
• Number of pins: 3
• Pressure from [kPA]: 27
• Pressure to [kPA]: 400
• Fabrication Number: ECM-BM-000
• Manufacturer: NTY

• Required quantity: 1
• Number of pins: 3
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BREMI

• Number of pins: 3
• Manufacturer: DELPHI
• Name: DE SS11221

• Length [mm]: 69
• Number of connectors: 3
• Weight [kg]: 0.03
• Supplementary Article/Info 2: with seal ring
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Exhaust Gas Recirculation
• Manufacturer Restriction: BMW, Mercedes-Benz
• Number of pins: 2
• Cable Length [mm]: 200
• Cable Cross Section [mm²]: 0.75
• Contact surface: Silver-plated
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Cable insulation material: Silicone
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Plug housing design: Plug sleeve housing
• SVHC: No SVHC present!
• Manufacturer: HBE

Name: Kaabli remondikomplekt, jahutusvedeliku temperatuuri andur

• Length [mm]: 69
• Number of connectors: 3
• Weight [kg]: 0.02
• Supplementary Article/Info 2: with seal ring
• Manufacturer: BLUEPRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Exhaust System: before soot particulate filter
• Vehicle Equipment: for vehicles without SCR system
• Connector Shape: D Shape
• Number of pins: 3
• Name: Andur, heitgaasisurve
• Manufacturer: NRF

• Number of connectors: 3
• Material: Plastic
• Weight [kg]: 0.03
• Name: ANDUR, HEITGAASISURVE
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 69
• Number of connectors: 3
• Weight [kg]: 0.03
• Supplementary Article/Info 2: with seal ring
• Name: SW 20 93 6411
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Connector Shape: oval
• Number of pins: 3
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with seal ring
• Number of pins: 3
• Name: Andur,Nukkvollipositsioon
• Manufacturer: MEY

• Fitting Position: Intake Manifold
• Number of pins: 3
• Connector Shape: oval
• Supplementary Article/Info 2: with seal ring
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of connectors: 3
• Material: Plastic
• Manufacturer: SWAG
• Name: SW 20 94 7155

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Exhaust System: before soot particulate filter
• Vehicle Equipment: for vehicles without SCR system
• Mounting Type: Clipped
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Name: ANDUR, HEITGAASISURVE
• Manufacturer: HEL
• Lisainfo: 6PP009409-021
• Additional information: 6PP009409-021

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Exhaust System: before soot particulate filter
• Vehicle Equipment: for vehicles with SCR system
• Number of pins: 3
• Pressure [Pa] from: 0
• Pressure [Pa] to: 100,000
• Manufacturer: NRF

• Number of connectors: 3
• Weight [kg]: 0.014
• for OE number: 13 62 7 804 742
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 3
• Sensor Type: Hall Sensor
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PU009168241

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: N57 D30 A
• Pressure from [kPA]: 27
• Pressure to [kPA]: 400
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 4.508
• Name: ANDUR, HEITGAASISURVE
• Manufacturer: EPS

• Exhaust System: before soot particulate filter
• Vehicle Equipment: for vehicles with SCR system
• Mounting Type: Bolted
• Number of pins: 3
• Diameter 1 [mm]: 8
• Diameter 2 [mm]: 8
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PP009403421

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 3
• Weight [kg]: 0.12
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV350

• Number of pins: 3
• Supplementary Article/Supplementary Info: with seal
• Colour: black
• Material: Plastic
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Number of connectors: 3
• Weight [kg]: 0.014
• for OE number: 13 62 7 804 742
• Name: SW 33 10 1713
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: N57 D30 A
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: EPS

• Trim Level: BLUE PERFORMANCE(+)
• Number of pins: 3
• Opening pressure [kPa]: 14
• Manufacturer: DLP

Name: CZUJNIK CI—NIENIA SPALIN BMW 120D, X6 XDRIVE M50D 04-

• Number of pins: 3
• not for emission standard: Euro 3 (D3)
• Colour: black
• Material: Plastic
• Manufacturer: AIC

Exhaust System: for vehicles with factory fitted soot -/particulate filter General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Construction Year to: 06.2020
• Sensor Type: Hall Sensor
• Number of pins: 3
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Weight [kg]: 0.03
• Manufacturer: VALEO

• Exhaust System: before soot particulate filter
• Connector Shape: D Shape
• Number of circuits: 1
• Weight [kg]: 0.03
• Number of pins: 3
• Supplementary Article/Info 2: Control Unit/Software must be trained/updated
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: N57 D30 A
• Exhaust System: before soot particulate filter
• Vehicle Equipment: for vehicles with SCR system
• Output Voltage, from [V]: 0.5
• Output Voltage, up to [V]: 4.5
• Name: Andur, heitgaasisurve
• Manufacturer: EPS

• for OE number: 13 62 7 804 150
• Fabrication Number: EPP-BM-016

• Engine Code: N57 D30 A
• Number of pins: 3
• Pressure [Pa] from: 88,000
• Pressure [Pa] to: 202,000
• Manufacturer: FAE

• for OE number: 13 62 8 507 634
• Number of pins: 3
• Connector Shape: oval
• Socket colour: black
• Fabrication Number: ECS-BM-005
• Manufacturer: NTY

• Number of pins: 3
• Fitting Position: before soot particulate filter
• Vehicle Equipment: for vehicles without urea injection (AdBlue®)
• not for emission standard: Euro 3 (D3)
• Manufacturer: METZGER

Exhaust System: for vehicles with factory fitted soot -/particulate filter

• Engine Code: N57 D30 A
• Exhaust System: before soot particulate filter
• Vehicle Equipment: for vehicles without SCR system
• Pressure from [kPA]: 10
• Pressure to [kPA]: 213
• Output Voltage, from [V]: 0.93
• Output Voltage, up to [V]: 4.75
• Name: EP 1.993.283
• Manufacturer: EPS

• Mounting Type: Bolted
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Name: Andur,ohuvotu rohk
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of connectors: 2
• Number of pins: 3
• Fitting Position: before soot particulate filter
• Warranty: 5 years warranty
• General Information: Sold in Hueco brand: printing and packaging
• Manufacturer: HUCO

Exhaust System: for vehicles with factory fitted soot -/particulate filter

• Fabrication Number: EGT-BM-026
• Fitting Position: before catalytic converter
• Cable Length [mm]: 975
• Number of pins: 2

• Spanner Size: 27
• Vehicle Equipment: for vehicles with diesel soot filter
• Connector Shape: oval
• Number of pins: 3
• Fitting Position: before soot particulate filter
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Alternatively:
• Number of pins: 3
• Opening pressure [kPa]: 100
• Name: CZUJNIK CI—N. SPALIN BMW 114D, X6 XDRIVE 40D 04-
• Manufacturer: DLP

• Fabrication Number: EGT-BM-014
• Cable Length [mm]: 300
• Manufacturer: NTY

• Vehicle Equipment: for vehicles with SCR system
• Number of pins: 3
• Name: Andur, heitgaasisurve
• Manufacturer: MEY

• Fitting Position: Fuel Rail
• Thread Size: M 18
• Number of pins: 3
• Weight [kg]: 0.07
• Thread Pitch [mm]: 1.5
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Name: CE 17SKV615
• Manufacturer: ESEN SKV

• Supplementary Article/Info 2: High Pressure Side
• Fuel Mixture Formation: Direct Injection
• Name: ANDUR,KšTUSEROHK
• Manufacturer: BOS

• Fabrication Number: EGT-BM-023
• Cable Length [mm]: 597
• Number of pins: 2
• Sensor Type: NTC Sensor
• for OE number: 13628507629
• Manufacturer: NTY

• Number of pins: 3, 1
• Connector Shape: oval
• Name: Andur, heitgaasisurve
• Manufacturer: MAX

• Pressure hose connector diameter [mm]: 5, 6.5
• Length [m]: 1
• Material: Silicone
• Chemical Properties: Oil resistant
• Temperature range from [°C]: -40
• Temperature range to [°C]: +350
• Clamping range from [mm]: 10, 11, 11.5, 12.5
• Clamping range to [mm]: 12.5, 13.5, 14, 15
• SVHC: No SVHC present!
• Manufacturer: HBE

Exhaust System: for vehicles with factory fitted soot -/particulate filter Supplementary Article/Info 2: with connection line, with protection hose, with marten protection, with clamps Technical Information: Using this repair kit, defective connecting hoses between the diesel particle filter (DPF) and the differential pressure sensor can be quickly and simply replaced. Pine marten bites may also be responsible for damage, and not just mechanical and thermic influences. That's why this set is supplied with protective hoses that are resistant to both high temperatures and pine marten bites. They protect the silicone pressure lines from external influences. The spring band clamps included in the scope of supply ensure that the hoses are held securely. Name: Remondikomplekt, survetorustik (tahma-/partiklifilter)

• Engine Code: N57 D30 A
• Trim Level: Blue Performance
• Sensor Type: Differential Pressure Sensor
• Output Voltage, up to [V]: 5
• Measuring Range to [kPa]: 100
• Number of pins: 3
• Number of mounting bores: 1
• Supplementary Article/Supplementary Info: without accessories
• Manufacturer: PIERBURG

• for OE number: 13 62 7 805 606
• Number of pins: 2
• Supplementary Article/Info 2: with cable
• Warranty: 3 years warranty
• Exhaust System: after soot particulate filter
• Socket colour: black
• Weight [kg]: 0.07
• Shape: straight
• Always compare old and new part (in particular OE No.):
• Name: CE 30SKV399
• Manufacturer: ESEN SKV

• Fitting Position: Exhaust Manifold
• Supplementary Article/Info 2: without connection line
• Number of connectors: 1
• Number of pins: 3
• Manufacturer: METZGER

• Lambda Sensor: Diagnostic Probe, Broadband lambda sensor, Heated
• Fitting Position: after catalytic converter
• Trim Level: BLUE PERFORMANCE
• Cable Length [mm]: 470
• Name: DE ES21159-12B1
• Manufacturer: DELPHI

• Engine Code: N57 D30 A
• Fitting Position: before soot particulate filter
• Number of pins: 2
• Warranty: 3 years warranty
• Version: AM
• Weight [kg]: 0.08
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 30SKV437

• Engine Code: N57 D30 A
• Fitting Position: Particulate Filter
• Number of pins: 2
• Version: AM
• Manufacturer: METZGER

• Lambda Sensor: Lambda Sensor
• Voltage [V]: 12
• Colour: red
• Number of circuits: 5
• Weight [kg]: 0.15
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV905

• Engine Code: N57 D30 A
• Fitting Position: after catalytic converter
• Trim Level: BLUEPERFORMANCE
• Length [mm]: 470
• Cable Length [mm]: 450
• Conductor Number: 5
• Number of circuits: 5
• Name: EP 1.998.468
• Manufacturer: EPS

Lambda Sensor: Diagnostic Probe, Heated, Planar probe, Broadband lambda sensor, Thread pre-greased

• Engine Code: N57 D30 A
• Lambda Sensor: Regulating Probe, Heated
• Fitting Position: before catalytic converter
• Number of circuits: 5
• Length [mm]: 500
• Name: Lambda andur
• Manufacturer: MAX

• Engine Code: N57 D30 A
• Fitting Position: before catalytic converter
• Cable Length [mm]: 570
• Conductor Number: 5
• Number of circuits: 5
• Name: EP 1.998.472
• Manufacturer: EPS

Lambda Sensor: Regulating Probe, Heated, Planar probe, Broadband lambda sensor, Thread pre-greased

• Lambda Sensor: Broadband lambda sensor
• Thread Size: M18 x 1,5
• Cable Length [mm]: 570
• Number of pins: 6
• Name: Lambda andur
• Manufacturer: MEY

Fitting Position: before soot particulate filter, before catalytic converter

• Construction Year to: 06.2020
• Fitting Position: before catalytic converter
• Number of pins: 6
• Cable Length [mm]: 450
• Thread Size: M18x1,5
• Switch Pressure [bar]: 4
• Weight [kg]: 0.15
• Manufacturer: VALEO

Lambda Sensor: Planar probe, Broadband lambda sensor, Thread pre-greased, Heated

• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 5
• Overall Length [mm]: 470
• Recommended change interval [km]: 250,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 5
• Overall Length [mm]: 540
• Recommended change interval [km]: 250,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Resistor Type: Hot-film Sensor
• Number of connectors: 5
• Weight [kg]: 0.038
• Housing Type: without housing
• for OE number: 13 62 7 804 150
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Lambda Sensor: Diagnostic Probe
• Number of circuits: 5
• Cable Length [mm]: 470
• Manufacturer: METZGER

• Engine Code: N57 D30 A
• Emission Standard: Euro 6
• Block Separation:
• Lambda Sensor: Regulating Probe, Heated
• Voltage [V]: 12
• Conductor Number: 5
• Cable Length [mm]: 500
• Number of pins: 6
• Name: LAMBDA ANDUR
• Manufacturer: PIE

Fitting Position: after soot particulate filter, before soot particulate filter

• Engine Code: N57 D30 A
• Operating Mode: Electric
• Voltage [V]: 12
• Manufacturer: PIERBURG