• Construction Year to: 09.1998
• Pikkus (mm): 990
• Installatsiooni pool: ees vasakul, ees paremal, katalüsaatori ees
• Lambda andur: Sond, Keere eelmääritud
• Seerianumber: ESL-BM-005
• Manufacturer: NTY
• Name: NTY ESL-BM-005

• Fitting Position: before catalytic converter
• Number of circuits: 4
• Cable Length [mm]: 295
• External Thread [mm]: M18 x 1,5
• Spanner Size: 22
• Lambda Sensor: Regulating Probe
• Lisainfo: Lambda sensor
• Additional information: Lambda sensor

• Fitting Position: after catalytic converter
• Number of circuits: 4
• Switch Point [°C]: 98
• Cable Length [mm]: 1,000
• External Thread [mm]: M18 x 1,5
• Spanner Size: 22
• Lambda Sensor: Heated
• Manufacturer: JP GROUP A/S
• Lisainfo: Lambda sensor
• Additional information: Lambda sensor

• Left-/right-hand drive vehicles: for right-hand drive vehicles
• Pikkus (mm): 990
• Lambda andur: Diagnoosisond, Sond, Keere eelmääritud
• Seerianumber: ESL-BM-002
• Manufacturer: NTY

Installatsiooni pool: ees vasakul, ees paremal, ees, katalüsaatori ees, pärast katalüsaatorit

• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Lambda andur: Diagnoosisond, Keere eelmääritud
• Seerianumber: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Construction Year from: 10.1998
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Pikkus (mm): 320
• Lambda andur: Sond, Diagnoosisond, Keere eelmääritud
• Seerianumber: ESL-BM-008
• Manufacturer: NTY

Installatsiooni pool: ees vasakul, ees paremal, ees, katalüsaatori ees, pärast katalüsaatorit

• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Pikkus (mm): 370
• Lambda andur: Diagnoosisond, Sond, Keere eelmääritud
• Seerianumber: ESL-BM-003
• Manufacturer: NTY

Installatsiooni pool: ees vasakul, ees paremal, ees, katalüsaatori ees, pärast katalüsaatorit

• Number of circuits: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: KAMOKA

• Technical Information Number: Universal
• Overall Length [mm]: 325
• Number of pins: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: ASHIKA
• Lisainfo: 43-U04
• Additional information: 43-U04

• tehnilise informatsiooni number: Universal
• pikkus üle kõige (mm): 325
• Pistikkontaktide arv: 4
• Lambda andur: Sond
• Manufacturer: JAPKO

• Engine Code: M52 B20 (206S3)
• Construction Year from: 09.1998
• Lambda Sensor: Diagnostic Probe
• Length [mm]: 990
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Construction Year from: 10.1998
• Lambda andur: Sond
• Pinge [V]: 12
• Pikkus (mm): 350
• Ülekandeliinide arv: 4
• Kaal (kg): 0,14
• Takistus [oom]: 2,1
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: ENERGY

• Engine Code: M52 B20 (206S3)
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Construction Year from: 09.1998
• Lambda Sensor: Regulating Probe, Planar probe
• Length [mm]: 320
• Number of pins: 4
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Construction Year from: 10.1998
• Lambda Sensor: Diagnostic Probe, Heated
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 990
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Construction Year from: 09.1998
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 103
• Gross Weight [g]: 152
• Manufacturer: DENSO
• Name: DN DOX-0117

Lambda Sensor: Regulating Probe, Heated, Finger probe, Lambda Sensor Additional information: "Tootja: DENSO
A4 AVANT (8D5, B5),
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
A4 AVANT (8D5, B5),
(kvaliteediklass: Q)"

• Engine Code: M52 B20 (206S3)
• Construction Year from: 10.1998
• Lambda Sensor: Regulating Probe, Heated
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Length [mm]: 290
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Lambda Sensor: Regulating Probe
• Construction Year from: 10.1998
• Engine Code: M52 B20 (206S3)
• Lambda andur: Bistabiilne andur
• Pinge [V]: 12
• Pikkus (mm): 430
• Garantii: 3 aastat garantii
• Ülekandeliinide arv: 4
• Kaal (kg): 0,1
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV080

• Construction Year from: 10.1998
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Lambda Sensor: Regulating Probe, Finger probe, Heated
• Engine Code: M52B(206S3), M52B(206S4)
• Cable Length [mm]: 990
• Name: LAMBDA ANDUR
• Manufacturer: DLP

Additional information: "Tootja: DELPHI
X5 (E53), 05.00-
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
X5 (E53), 05.00-
(kvaliteediklass: PJ)"

• Conductor Number: 4
• Resistor [Ohm]: 2.1
• Number of circuits: 4
• Length [mm]: 300
• Cable Length [mm]: 300
• Lambda Sensor: Heated
• Name: LAMBDA ANDUR
• Manufacturer: MAG

• Construction Year from: 10.1998
• Lambda andur: Diagnoosisond
• Pinge [V]: 12
• Pikkus (mm): 990
• Garantii: 3 aastat garantii
• Ülekandeliinide arv: 4
• Kaal (kg): 0,18
• Takistus [oom]: 2,1
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV665

• Construction Year from: 10.1998
• Lambda andur: Sond
• Pinge [V]: 12
• Pikkus (mm): 350
• Garantii: 3 aastat garantii
• Ülekandeliinide arv: 4
• Kaal (kg): 0,14
• Takistus [oom]: 2,1
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Name: CE 09SKV666
• Manufacturer: ESEN SKV

• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Exhaust System: for pre-catalytic converter
• Cable Length [mm]: 300
• Lambda Sensor: Finger probe, Heated
• Name: LAMBDA ANDUR
• Manufacturer: DLP

Additional information: "Tootja: DELPHI
X3 (E83), 01.04-
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
X3 (E83), 01.04-
(kvaliteediklass: PJ)"

• Number of circuits: 4
• Resistor [Ohm]: 2.1
• Conductor Number: 4
• Length [mm]: 990
• Cable Length [mm]: 990
• Lambda Sensor: Heated
• Name: LAMBDA ANDUR
• Manufacturer: MAG

• Fitting Position: Left, Right, Front, after catalytic converter
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Lambda Sensor: Diagnostic Probe, Finger probe, Heated
• Quantity: 2
• Cable Length [mm]: 450
• Name: LAMBDA ANDUR
• Manufacturer: DLP

• Kaablipikkus (mm): 295
• Pistikkontaktide arv: 4
• Lambda andur: soojendatud
• Pinge [V]: 12
• Keermemõõt: M18 x 1,5
• Manufacturer: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Construction Year from: 10.1998
• Lambda Sensor: Regulating Probe, Diagnostic Probe
• Block Separation:
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

Fitting Position: before catalytic converter, after catalytic converter Left-/right-hand drive vehicles: for left-hand drive vehicles, for right-hand drive vehicles

• Engine Code: M52 B20 (206S3)
• Construction Year from: 10.1998
• Fitting Position: before catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Number of pins: 4
• for OE number: V99760001
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Length [mm]: 350
• Exhaust System: after catalytic converter
• Manufacturer: VEMO GERMANY

Lambda Sensor: Regulating Probe, Finger probe, Heated, Thread pre-greased Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year from: 10.1998
• Fitting Position: Left, Right, Front, before catalytic converter
• Left-/right-hand drive vehicles: for right-hand drive vehicles
• Lambda Sensor: Regulating Probe, Finger probe, Heated
• Cable Length [mm]: 970
• Name: LAMBDA ANDUR
• Manufacturer: DLP

• Construction Year from: 09.1998
• Quantity: 2
• Fitting Position: before catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Lambda Sensor: Planar probe, Heated, Thread pre-greased
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Manufacturer: VEMO GERMANY

Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• for OE number: 11 78 1 427 884
• Lambda Sensor: Heated
• Manufacturer: TRUCKTEC

• Construction Year to: 09.1998
• Line insulation design: with silicone-coated woven-fibre insulation
• Thread Size: M18 x 1,5
• Connector Shape: round
• Conductor Number: 4
• Length [mm]: 300
• Number of circuits: 4
• Weight [kg]: 0.123
• Lambda Sensor: Thread pre-greased
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year from: 10.1998
• Lambda Sensor: Regulating Probe
• Length [mm]: 350
• Number of pins: 4
• Technical Information Number: Universal 77004
• Manufacturer: FAE
• Additional information: MD77243
• Lisainfo: MD77243

• Construction Year from: 10.1998
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Number of circuits: 4
• Overall Length [mm]: 320
• Available as universal article as well, see article no.: 0258986505
• Recommended change interval [km]: 160,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Construction Year from: 10.1998
• Lambda Sensor: Diagnostic Probe
• Length [mm]: 1,020
• Number of pins: 4
• Technical Information Number: Universal 77004
• Manufacturer: FAE

• Left-/right-hand drive vehicles: for right-hand drive vehicles
• Lambda Sensor: Finger probe
• Thread Size: M18 x 1,5
• Cable Length [mm]: 1,020
• Number of pins: 4
• Name: Lambda andur
• Manufacturer: MEY

Fitting Position: for cylinder 1-3, for cylinder 4-6, before catalytic converter

• Construction Year from: 09.1998
• Construction Year to: 04.2003
• Engine Code: M52B20,
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Fitting Position: before catalytic converter
• Lambda Sensor: Planar probe, Thread pre-greased, Heated
• Number of pins: 4
• Cable Length [mm]: 300
• Thread Size: M18x1,5
• Switch Pressure [bar]: 4
• Manufacturer: VALEO

• Fitting Position: before catalytic converter
• Lambda Sensor: Planar probe, Thread pre-greased, Heated
• Number of pins: 4
• Cable Length [mm]: 1,020
• Thread Size: M18x1,5
• Switch Pressure [bar]: 4
• Name: VA 368214
• Manufacturer: VALEO

• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 990
• Available as universal article as well, see article no.: 0258986505
• Recommended change interval [km]: 160,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Construction Year to: 09.1998
• Lambda Sensor: Regulating Probe
• Length [mm]: 970
• Number of pins: 4
• Technical Information Number: Universal 77013
• Manufacturer: FAE

• Construction Year from: 10.1998
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Left-/right-hand drive vehicles: for right-hand drive vehicles
• Number of circuits: 4
• Overall Length [mm]: 990
• Available as universal article as well, see article no.: 0258986505
• Recommended change interval [km]: 160,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Construction Year from: 09.1998
• Fitting Position: Left, before catalytic converter, Right
• Left-/right-hand drive vehicles: for right-hand drive vehicles
• Lambda Sensor: Regulating Probe
• Block Separation:
• Length [mm]: 980
• Number of circuits: 4
• Manufacturer: VDO

• Construction Year from: 09.1998
• Fitting Position: Left, after catalytic converter, Right
• Lambda Sensor: Diagnostic Probe
• Block Separation:
• Length [mm]: 990
• Number of circuits: 4
• Manufacturer: VDO

• Construction Year to: 09.1998
• Fitting Position: Left, Right, Front, before catalytic converter
• Required quantity: 2
• Lambda Sensor: Regulating Probe
• Cable Length [mm]: 1,000
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Lambda Sensor: Heated
• Number of pins: 4
• Connector Shape: round
• Cable Length [mm]: 860
• for article number: 81533
• Manufacturer: MEAT&DORIA

• Construction Year from: 09.1998
• Fitting Position: Left, before catalytic converter, Right
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Lambda Sensor: Regulating Probe
• Block Separation:
• Length [mm]: 350
• Number of circuits: 4
• Manufacturer: VDO

• Construction Year to: 09.1998
• Fitting Position: Rear, Front
• Lambda Sensor: Regulating Probe, Heated
• Voltage [V]: 12
• Conductor Number: 4
• Cable Length [mm]: 970
• Number of pins: 4
• Manufacturer: PIERBURG

• Construction Year from: 07.1996
• Construction Year to: 09.1998
• Exhaust System: for pre-catalytic converter
• for OE number: 11781427884
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 990
• Number of pins: 4
• Weight [g]: 109
• Gross Weight [g]: 142
• Manufacturer: DENSO

Lambda Sensor: Regulating Probe, Heated, Finger probe, Lambda Sensor Additional information: "Tootja: DENSO
3 KABRIOLET (E36), 0
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
3 KABRIOLET (E36), 0
(kvaliteediklass: Q)"

• Construction Year from: 07.1996
• Construction Year to: 09.1998
• Fitting Position: Left, before catalytic converter, Right
• Lambda Sensor: Regulating Probe
• Block Separation:
• Length [mm]: 990
• Number of circuits: 4
• Manufacturer: VDO