• Fitting Position: Rear Axle Left, Rear Axle Right
• Mounting Type: Rubber-Metal Mount
• Manufacturer: JP GROUP
• Lisainfo: Bearing for strut, rear
• Additional information: Bearing for strut, rear

• Seal Material: Paper
• Fitting Position: Rear Axle Right, Rear Axle Left
• Weight [kg]: 0.001
• Name: TIHEND,AMORDIKINNITUS TUGILAAGER
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Quantity per packing unit: 100
• Fitting Position: Rear Axle
• Manufacturer: ELRING

• Fitting Position: Rear Axle Left, Rear Axle Right
• Required quantity: 2
• Supplementary Article/Info 2: without bearing
• Weight [kg]: 0.2
• Manufacturer: CORTECO
• Name: COC 21653084

• Fitting Position: Rear Axle Left, Rear Axle Right
• Manufacturer: GSP

• Fitting Position: Rear Axle
• Manufacturer: DENCKERMANN AMORTYZATORY

• Fitting Position: Rear Axle
• SVHC: No SVHC present!
• Name: Vedruamordi tugilaager
• Manufacturer: FAG

• Fitting Position: Rear Axle
• Supplementary Article/Info 2: without bearing
• Manufacturer: KAVO PARTS

• Fitting Position: Rear Axle
• Required quantity: 1
• Weight [g]: 219
• Name: IM 30864
• Manufacturer: ORIGINAL IMPERIUM

• Quantity per packing unit: 2
• Quantity Unit: Set
• Fitting Position: Rear Axle
• Weight [kg]: 0.253
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Mounting Type: Rubber-Metal Mount
• Quality class: PJ
• Name: Suspension strut support bearing left=right

• Material: Rubber/Metal
• Fitting Position: Rear Axle
• Weight [kg]: 0.22
• Supplementary Article/Info 2: without ball bearing
• Observe service information:
• Name: Laager - K„„ndmik. BMW T. E30
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Seal Material: Paper
• Material: Rubber/Metal
• Supplementary Article/Supplementary Info: with gasket/seal
• Fitting Position: Rear Axle
• Weight [kg]: 0.24
• Supplementary Article/Info 2: without ball bearing
• Observe service information:
• Name: Laager - K„„ndmik. BMW T. E30
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Equipment: for vehicles without level control
• Quantity per axle: 2
• Fitting Position: Rear Axle Left, Rear Axle Right
• Supplementary Article/Supplementary Info: Rolling Bearing is not required
• Manufacturer: SACHS

for OE number: 1 092 362, 1 137 972, 33 50 4 035 929, 33 52 1 092 362, 33 52 1 137 972, 4 035 929 SVHC: No information available, please contact the manufacturer!

• Vehicle Equipment: for vehicles without level control
• Quantity per axle: 2
• Fitting Position: Rear Axle Left, Rear Axle Right
• Supplementary Article/Supplementary Info: Rolling Bearing is not required
• Manufacturer: LMI

for OE number: 1 092 362, 1 137 972, 33 50 4 035 929, 33 52 1 092 362, 33 52 1 137 972, 4 035 929 SVHC: No information available, please contact the manufacturer! Name: Laager - K„„ndmik. BMW T. E30/E36/46 Z3/Z4 85-06 LE/PR

• Vehicle Equipment: for vehicles without level control
• Quantity per packing unit: 4
• Fitting Position: Rear Axle
• Supplementary Article/Info 2: without ball bearing
• Weight [kg]: 0.263
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Rear Axle Left, Rear Axle Right
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Rear Axle
• Manufacturer: KAMOKA AMORTYZATORY

• Seal Material: Paper
• Material: Rubber/Metal
• Supplementary Article/Supplementary Info: with gasket/seal
• Fitting Position: Rear Axle
• Weight [kg]: 0.24
• Supplementary Article/Info 2: without ball bearing
• Name: SW 20 55 0002
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle, Rear Axle Right, Rear Axle Left
• Manufacturer: AUTO-GH

• Fitting Position: Rear Axle, Rear Axle both sides
• Suspension: for vehicles without sports suspension
• Supplementary Article/Info 2: without bearing
• Name: Suspension strut support bearing left=right
• Quality class: PJ

Lisainfo: "Tootja: SRL
BMW E36/E46
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
BMW E36/E46
(kvaliteediklass: PJ)"

• Fitting Position: Rear Axle
• Technical Information: Suspension mounting only (no bearing), cup (x1)
• Manufacturer: KYB

Name: Laager - K„„ndmik. BMW T. 3 (E30, E46), Z1, Z3 (E36) 1.6-3.2 09.82- LE/PR

• Fitting Position: Rear Axle
• Supplementary Article/Info 2: without bearing
• reinforced version:
• Supplementary Article/Supplementary Info: with gasket/seal
• Slim Set:
• Required quantity: 2
• replacement in pairs recommended:
• Manufacturer: MEY

General Information: Improved design for longer service life: MEYLE-HD parts deliver enhanced durability. Compared to OE, MEYLE-HD is technically improved with reinforced inner parts, using higher quality materials or optimized design solution. Name: Laager - K„„ndmik. BMW T. E30/E36/46 Z3/Z4 85-06 LE/PR Z USZCZELK¤

• Construction Year from: 09.1985
• Construction Year to: 09.1989
• Fitting Position: Rear Axle
• Mounting Type: Rubber-Metal Mount
• Supplementary Article/Supplementary Info: with gasket/seal, Rolling Bearing is not required
• Manufacturer: METZGER

• Fitting Position: Rear Axle
• Manufacturer: ASHIKA

• Fitting Position: Rear Axle
• Manufacturer: JAPKO

• Fitting Position: Rear Axle both sides
• Supplementary Article/Info 2: without bearing
• Name: Suspension strut support bearing left=right
• Quality class: PJ

Lisainfo: "Tootja: SRL
BMW 3 (E30) SDN/KOMB
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
BMW 3 (E30) SDN/KOMB
(kvaliteediklass: PJ)"

• Material: Rubber/Metal
• Supplementary Article/Supplementary Info: with gasket/seal
• Fitting Position: Rear Axle Left, Rear Axle Right
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Quantity per axle: 2
• Alternatively:
• Supplementary Article/Supplementary Info: with gasket/seal, Rolling Bearing is not required
• Fitting Position: Rear Axle Left, Rear Axle Right
• Name: Laager - K„„ndmik. BMW T. E30/E36/E46 Z USZCZELK¤
• Manufacturer: LMI

for OE number: 1 092 362, 1 123 351, 1 125 554, 1 128 734, 1 128 819, 1 137 972, 33 52 1 092 362, 33 52 1 123 351, 33 52 1 125 554, 33 52 1 128 734, 33 52 1 128 819, 33 52 1 137 972, 33 52 6 772 864, 6 772 864 SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle
• Name: Vedruamordi tugilaager
• Manufacturer: MAX

• Fitting Position: Front Axle Left, Front Axle Right
• Supplementary Article/Info 2: with bearing
• Manufacturer: JP GROUP
• Lisainfo: Bearing for strut, with bearing, front
• Additional information: Bearing for strut, with bearing, front

• Width 1 [mm]: 33
• Number of Parts [parts]: 3
• Inner Diameter 1 [mm]: 10
• Outer Diameter 1 [mm]: 47
• Manufacturer: SNR
• Name: SN KB950.00

Fitting Position: Right, Left, Rear Axle, Rear Axle Right, Rear Axle Left

• Fitting Position: Rear Axle
• Vehicle Equipment: for vehicles without level control
• Suspension: for vehicles without M technology
• Weight [kg]: 0.2
• Supplementary Article/Info 2: without bearing
• Guarantee: 5 years guarantee
• Packaging length [cm]: 14
• Packaging width [cm]: 4.4
• Packaging height [cm]: 14.5
• Manufacturer: MONROE PODUSZKI AMORTYZATORA

• Fitting Position: Front Axle
• Supplementary Article/Info 2: with bearing
• Name: Laager - K„„ndmik. BMW P. E30/34
• Manufacturer: MAX

• Fitting Position: Front Axle Left, Front Axle Right
• Height [mm]: 50
• Manufacturer: GSP

• Fitting Position: Rear Axle
• Manufacturer: BILSTEIN
• Name: BI 12-244713
• Quality class: Q

• Name: Suspension strut support bearing left=right
• Quality class: PJ

Lisainfo: "Tootja: POLCAR
BMW E30/E34
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle, Front Axle Right, Front Axle Left
• Manufacturer: AUTO-GH

• Fitting Position: Front Axle Left, Front Axle Right
• Required quantity: 2
• Supplementary Article/Info 2: with ball bearing
• Manufacturer: CORTECO
• Name: COC 80001598

• Inner Diameter [mm]: 14, 32
• Material: Rubber/Metal
• Fitting Position: Front Axle
• Weight [kg]: 0.652
• Supplementary Article/Info 2: with ball bearing
• Name: Laager - K„„ndmik. BMW P. E30/34
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Suspension: for vehicles with standard suspension
• SVHC: No SVHC present!
• Manufacturer: FAG
• Name: LU 814002910

• Fitting Position: Front Axle
• Supplementary Article/Info 2: with bearing
• Required quantity: 2
• replacement in pairs recommended:
• Name: Laager - K„„ndmik. BMW P. E30/34
• Manufacturer: MEY

• Fitting Position: Front Axle Left, Front Axle Right
• Quantity per axle: 2
• Supplementary Article/Supplementary Info: with integrated ball bearing
• Name:
• Manufacturer: SAA

for OE number: 1 124 508, 1 139 452, 31 33 1 124 508, 31 33 1 139 452 SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle Left, Front Axle Right
• Quantity per axle: 2
• Supplementary Article/Supplementary Info: with integrated ball bearing
• Manufacturer: LEMFORDER
• Name: LMI 3908001

for OE number: 1 124 508, 1 139 452, 31 33 1 124 508, 31 33 1 139 452 SVHC: No information available, please contact the manufacturer!

• Supplementary Article/Info 2: with ball bearing
• Fitting Position: Front Axle
• Weight [kg]: 0.652
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front Axle both sides
• Supplementary Article/Supplementary Info: with integrated ball bearing
• Name: Suspension strut support bearing left=right
• Quality class: PJ

for OE number: 1 124 508, 1 139 452, 31 33 1 124 508, 31 33 1 139 452 Lisainfo: "Tootja: SRL
BMW E30/E34
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
BMW E30/E34
(kvaliteediklass: PJ)"

• for OE number: 31 33 1 139 452
• Fitting Position: Front Axle both sides
• Manufacturer: TRUCKTEC

• Fitting Position: Front Axle
• Manufacturer: KYB
• Name: KY SM1000

Technical Information: Suspension mounting w/ integrated suspension bearing / / / Fastenings : suspension mounting nut (x3), suspension mounting washer (x3)

• Fitting Position: Right, Left, Front Axle
• Supplementary Article/Info 2: with rolling bearing, with rubber mount
• Number of Parts [parts]: 7
• Article number of the recommended special tool: Clas : OM1112, Clas : OP3231
• Manufacturer: SNR /NTN-SNR/
• Name: SN KB650.00

• Fitting Position: Front Axle
• Manufacturer: BILSTEIN
• Name: BI 12-248605
• Quality class: Q

• Fitting Position: Rear Axle
• Weight [kg]: 0.44
• Weight [g]: 440
• Manufacturer: METALCAUCHO