• Fitting Position: Rear Axle Left, Rear Axle Right
• Mounting Type: Rubber-Metal Mount
• Manufacturer: JP GROUP
• Lisainfo: Bearing for strut, rear
• Additional information: Bearing for strut, rear

• Seal Material: Paper
• Fitting Position: Rear Axle Right, Rear Axle Left
• Weight [kg]: 0.001
• Name: TIHEND,AMORDIKINNITUS TUGILAAGER
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Installatsiooni pool: Tagasild, Tagasild vasakul, Tagasild paremal
• Seerianumber: AD-BM-000
• Manufacturer: NTY

• Fitting Position: Rear Axle Left, Rear Axle Right
• Mounting Type: Rubber-Metal Mount
• Quantity per axle: 2
• Replace in pairs only:
• Name: VEDRUAMORDI TUGILAAGER
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Material: Rubber/Metal
• Fitting Position: Rear Axle
• Name: Laager - K„„ndmik. BMW T. E36
• Manufacturer: MAX

• Installatsiooni pool: üleval
• Kaal (kg): 0,25
• Kaal (g): 250
• Manufacturer: METALCAUCHO

• Suspension: for vehicles without M technology
• Installatsiooni pool: Tagasild
• Manufacturer: DENCKERMANN AMORTYZATORY

• Fitting Position: Rear Axle
• Required quantity: 1
• Weight [g]: 255
• Name: IM 30809
• Manufacturer: ORIGINAL IMPERIUM

• Fitting Position: Rear Axle Left, Rear Axle Right
• Weight [kg]: 0.2
• Required quantity: 2
• Supplementary Article/Info 2: without ball bearing
• Manufacturer: CORTECO

• Fitting Position: Rear Axle
• SVHC: No SVHC present!
• Name: Vedruamordi tugilaager
• Manufacturer: FAG

• Quantity Unit: Set
• Fitting Position: Rear Axle
• Weight [kg]: 0.253
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Material: Rubber/Metal
• Fitting Position: Rear Axle
• Name: Laager - K„„ndmik. BMW T. E36/E46
• Manufacturer: MAX

• Material: Rubber/Metal
• Fitting Position: Rear Axle
• Weight [kg]: 0.228
• Supplementary Article/Info 2: without ball bearing
• Manufacturer: SWAG
• Name: SW 20 54 0008

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Material: Rubber/Metal
• Fitting Position: Rear Axle
• Weight [kg]: 0.228
• Supplementary Article/Info 2: without ball bearing
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Laager - K„„ndmik. BMW T. E30/E36/46 Z3/Z4 85-06 LE/PR

• for OE number: 33 52 1 092 362 S1
• Fitting Position: Rear Axle Left, Rear Axle Right
• Manufacturer: GSP

• Fitting Position: Rear Axle
• Required quantity: 2
• Manufacturer: TEDGUM

• Quantity per axle: 2
• Fitting Position: Rear Axle Left, Rear Axle Right
• Name: Laager - K„„ndmik. BMW T. E30 82-
• Manufacturer: SAA

for OE number: 1 092 362, 1 137 972, 33 50 4 035 929, 33 52 1 092 362, 33 52 1 137 972, 4 035 929 SVHC: No information available, please contact the manufacturer!

• Suspension: for vehicles without M technology
• Fitting Position: Rear Axle
• Manufacturer: KAMOKA AMORTYZATORY

• Fitting Position: Rear Axle
• Installatsiooni pool: Tagasild mõlemapoolselt
• Piirangutega toode/piirangu info 2: ilma laagrita
• Name: Suspension strut support bearing left=right
• Quality class: PJ

Lisainfo: "Tootja: SRL
BMW E36/E46
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
BMW E36/E46
(kvaliteediklass: PJ)"

• Construction Year to: 01.1998
• Fitting Position: Front Axle
• for OE number: 6N0413175A
• Manufacturer: KAMOKA AMORTYZATORY

• Quantity per axle: 2
• Fitting Position: Rear Axle Left, Rear Axle Right
• Manufacturer: LMI

for OE number: 1 092 362, 1 137 972, 33 50 4 035 929, 33 52 1 092 362, 33 52 1 137 972, 4 035 929 SVHC: No information available, please contact the manufacturer! Name: Laager - K„„ndmik. BMW T. E30/E36/46 Z3/Z4 85-06 LE/PR

• Fitting Position: Front Axle
• Name: TOLMUKAITSE KOMPLEKT,AMORDID
• Manufacturer: MAX

• Suspension: for vehicles without M technology
• Fitting Position: Rear Axle
• Technical Information: Suspension mounting only (no bearing), cup (x1)
• Manufacturer: KYB

Name: Laager - K„„ndmik. BMW T. 3 (E30, E46), Z1, Z3 (E36) 1.6-3.2 09.82- LE/PR

• Suspension: for vehicles without M technology
• Installatsiooni pool: Tagasild
• Manufacturer: JAPKO

• Suspension: for vehicles with standard suspension
• Fitting Position: Rear Axle
• Quantity per axle: 1
• Supplementary Article/Info 2: with protective cap/bellow
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Rear Axle
• Supplementary Article/Info 2: without bearing
• Required quantity: 2
• Quantity Unit: Piece
• Net weight [kg]: 0.25
• Name:
• Manufacturer: NK

• Name: Shock absorber protection kit left+right
• Quality class: Q

Lisainfo: "Tootja: POLCAR
ALFA ROMEO 33
(kvaliteediklass: Q)"

• Construction Year to: 01.1998
• Fitting Position: Rear Axle
• Manufacturer: KAMOKA AMORTYZATORY

• Suspension: for vehicles without M technology
• Installatsiooni pool: Tagasild
• Manufacturer: JAPKO

• Fitting Position: Front Axle
• Suspension: for vehicles without M technology
• Manufacturer: JAPKO

• Seal Material: Paper
• Material: Rubber/Metal
• Fitting Position: Rear Axle
• Weight [kg]: 0.24
• Supplementary Article/Supplementary Info: with attachment material
• Supplementary Article/Info 2: without ball bearing
• Name: Laager - K„„ndmik. BMW T. E36/E46
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Suspension: for vehicles with M technology
• Manufacturer: JP GROUP

• Suspension: for vehicles with sports suspension
• Installatsiooni pool: Tagasild
• Laagritüüp: Kummi-metalllaager
• Piirangutega toode/piirangu info: koos tihendiga, Veerelaagrid ei ole vajalikud
• Manufacturer: METZGER

• Suspension: for vehicles with standard suspension
• Fitting Position: Rear Axle
• Name: TOLMUKAITSE KOMPLEKT,AMORDID
• Manufacturer: MAX

• Installatsiooni pool: Tagasild, Tagasild paremal, Tagasild vasakul
• Manufacturer: AUTO-GH

• Fitting Position: Front Axle
• Garantii: 5 aastat garantii
• pakendi pikkus [cm]: 22
• pakendi laius [cm]: 11
• Name: CFD PK4780
• Manufacturer: DACO

• Fitting Position: Front Axle
• Name: CFD PK1510
• Manufacturer: DACO

• Name: Shock absorber protection kit left+right
• Quality class: Q

Lisainfo: "Tootja: POLCAR
3 COUPE (E46), 04.99
(kvaliteediklass: Q)"

• Seal Material: Paper
• Material: Rubber/Metal
• Fitting Position: Rear Axle
• Weight [kg]: 0.24
• Supplementary Article/Info 2: without ball bearing
• Supplementary Article/Supplementary Info: with attachment material
• Manufacturer: SWAG
• Name: SW 20 55 0001

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Suspension: for vehicles with standard suspension
• Manufacturer: JP GROUP

• Fitting Position: Front Axle
• Suspension: for vehicles without M technology
• Manufacturer: JAPKO

• Materjal: Kumm/metall
• Piirangutega toode/piirangu info: koos tihendiga
• Installatsiooni pool: Tagasild vasakul, Tagasild paremal
• Manufacturer: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Suspension: for vehicles with M technology
• Fitting Position: Rear Axle
• Height [mm]: 194
• Name: Tolmukaitse komplekt,Amordid
• Manufacturer: MAX

• Fitting Position: Rear Axle
• Supplementary Article/Info 2: without ball bearing
• reinforced version:
• Supplementary Article/Supplementary Info: with seal, Rolling Bearing is not required
• Slim Set:
• Required quantity: 2
• replacement in pairs recommended:
• Manufacturer: MEY

General Information: Improved design for longer service life: MEYLE-HD parts deliver enhanced durability. Compared to OE, MEYLE-HD is technically improved with reinforced inner parts, using higher quality materials or optimized design solution. Name: Laager - K„„ndmik. BMW T. E30/E36/46 Z3/Z4 85-06 LE/PR Z USZCZELK¤

• Fitting Position: Front Axle
• Manufacturer: JP GROUP
• Lisainfo: Dust Cover Kit, shock absorber
• Additional information: Dust Cover Kit, shock absorber

• Fitting Position: Rear Axle
• Suspension: for vehicles with M technology
• Installatsiooni pool: Tagasild mõlemapoolselt
• Name: Shock absorber protection kit left+right
• Quality class: PJ

Lisainfo: "Tootja: SRL
BMW E46
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
BMW E46
(kvaliteediklass: PJ)"

• Fitting Position: Rear Axle
• Weight [kg]: 0.3
• Supplementary Article/Info 2: without bearing
• Warranty: 5 years warranty
• Packaging length [cm]: 14
• Packaging width [cm]: 4.4
• Packaging height [cm]: 14.5
• Manufacturer: MONROE

• Fitting Position: Front Axle
• Manufacturer: DENCKERMANN AMORTYZATORY

• Fitting Position: Front Axle
• Installatsiooni pool: esisild mõlemapoolselt
• Name: Shock absorber protection kit left+right
• Quality class: PJ

Lisainfo: "Tootja: SRL
BMW/FIAT/SKODA FABIA
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
BMW/FIAT/SKODA FABIA
(kvaliteediklass: PJ)"

• Quantity per axle: 2
• Alternatively:
• Supplementary Article/Supplementary Info: with seal
• Fitting Position: Rear Axle Left, Rear Axle Right
• Name: Laager - K„„ndmik. BMW T. E30/E36/E46 Z USZCZELK¤
• Manufacturer: LMI

for OE number: 1 092 362, 1 123 351, 1 125 554, 1 128 734, 1 128 819, 1 137 972, 33 52 1 092 362, 33 52 1 123 351, 33 52 1 125 554, 33 52 1 128 734, 33 52 1 128 819, 33 52 1 137 972, 33 52 6 772 864, 6 772 864 SVHC: No information available, please contact the manufacturer!

• Suspension: for vehicles with sports suspension
• Material: PU (Polyurethane), Plastic
• Fitting Position: Rear Axle
• Weight [kg]: 0.192
• Name: PUHVER, VEDRUSTUS
• Manufacturer: FEB
• Additional information: F13096
• Lisainfo: F13096

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Suspension: for vehicles without M technology
• Fitting Position: Rear Axle
• Name: Tolmukaitse komplekt,Amordid
• Manufacturer: JPA

• Fitting Position: Front Axle
• Suspension: for vehicles without M technology
• Name: TOLMUKAITSE KOMPLEKT,AMORDID
• Manufacturer: KYB
• Additional information: KYB910084
• Lisainfo: KYB910084

• Quantity per axle: 2
• Alternatively:
• Supplementary Article/Supplementary Info: with seal
• Fitting Position: Rear Axle Left, Rear Axle Right
• Manufacturer: SACHS

for OE number: 1 092 362, 1 123 351, 1 125 554, 1 128 734, 1 128 819, 1 137 972, 33 52 1 092 362, 33 52 1 123 351, 33 52 1 125 554, 33 52 1 128 734, 33 52 1 128 819, 33 52 1 137 972, 33 52 6 772 864, 6 772 864 SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle
• Suspension: for vehicles with standard suspension
• Installatsiooni pool: Tagasild mõlemapoolselt
• Name: Shock absorber protection kit left+right
• Quality class: PJ

Lisainfo: "Tootja: SRL
BMW 3 (E46)
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
BMW 3 (E46)
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle
• Suspension: for vehicles without M technology
• Name: Tolmukaitse komplekt,Amordid
• Manufacturer: JPA

• Fitting Position: Rear Axle
• Manufacturer: MAGNETI MARELLI

• Fitting Position: Front Axle
• Weight [kg]: 0.4
• Warranty: 5 years warranty
• Packaging length [cm]: 22
• Packaging width [cm]: 11
• Packaging height [cm]: 18
• Manufacturer: MONROE

• Fitting Position: Front Axle
• Suspension: for vehicles without M technology
• Name: Tolmukaitse komplekt,Amordid
• Manufacturer: JPA

• Suspension: for vehicles without M technology
• Fitting Position: Rear Axle
• Name: Vedruamordi tugilaager
• Manufacturer: MAX

• Fitting Position: Right, Left, Rear Axle
• Width 1 [mm]: 33
• Inner Diameter 1 [mm]: 10
• Outer Diameter 1 [mm]: 47
• Manufacturer: SNR
• Name: SN KB950.00

• Fitting Position: Front Axle Left, Front Axle Right
• Supplementary Article/Info 2: with bearing
• Manufacturer: JP GROUP
• Lisainfo: Bearing for strut, with bearing, front
• Additional information: Bearing for strut, with bearing, front

• Fitting Position: Rear Axle
• Supplementary Article/Supplementary Info: with seal
• Name: Laager - K„„ndmik. BMW T. E36/E46
• Manufacturer: BIL

Additional information: "Tootja: BILSTEIN
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
(kvaliteediklass: Q)"

• Fitting Position: Front Axle
• Manufacturer: MAGNETI MARELLI
• Name: MM APK0004

• Fitting Position: Rear Axle
• Manufacturer: MAGNETI MARELLI
• Name: MM APK0044

• Fitting Position: Front Axle
• Manufacturer: AUTOFREN REPERATURKI
• Name: SE D5-004

• Fitting Position: Front Axle
• Quantity Unit: Set
• Name: TOLMUKAITSE KOMPLEKT,AMORDID
• Manufacturer: MEY

• Fitting Position: Rear Axle
• Quantity per axle: 2
• General Information: SKF recommends always changing in pairs both sides
• Manufacturer: SKF
• Name: SK VKDA40805

• Fitting Position: Front Axle
• Name: TOLMUKAITSE KOMPLEKT,AMORDID
• Manufacturer: SAA

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle
• Quantity Unit: Set
• Name: TOLMUKAITSE KOMPLEKT,AMORDID
• Manufacturer: MEY

• Fitting Position: Front Axle
• SVHC: No SVHC present!
• Name: LU 814003110
• Manufacturer: FAG

• Suspension: for vehicles without M technology
• Fitting Position: Rear Axle
• Name: TOLMUKAITSE KOMPLEKT,AMORDID
• Manufacturer: KYB

• Fitting Position: Rear Axle
• Material: PU (Polyurethane), Thermoplast
• Weight [g]: 251
• Component Number: 4
• Name: IM 50162
• Manufacturer: ORIGINAL IMPERIUM

• Fitting Position: Rear Axle
• Material: PU (Polyurethane), Thermoplast
• Weight [g]: 251
• Component Number: 4
• Name: IM 50171
• Manufacturer: ORIGINAL IMPERIUM

• Suspension: for vehicles without M technology
• Installatsiooni pool: Esisild
• Manufacturer: DENCKERMANN AMORTYZATORY

• Suspension: for vehicles with sports suspension
• Material: PU (Polyurethane), Plastic
• Fitting Position: Rear Axle
• Weight [kg]: 0.192
• Manufacturer: SWAG
• Name: SW 20 91 3096

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Weight [kg]: 0.4
• Warranty: 5 years warranty
• Packaging length [cm]: 22
• Packaging width [cm]: 11
• Packaging height [cm]: 18
• Manufacturer: MONROE

• Suspension: for vehicles with M technology
• Fitting Position: Rear Axle
• Quantity Unit: Set
• Name: TOLMUKAITSE KOMPLEKT,AMORDID
• Manufacturer: MEY

• Fitting Position: Rear Axle
• Suspension: for vehicles with M technology
• Name: TOLMUKAITSE KOMPLEKT,AMORDID
• Manufacturer: SAA

SVHC: No information available, please contact the manufacturer!

• Material: Rubber/Metal
• Fitting Position: Front Axle
• Observe service information:
• Name: Laager - K„„ndmik. BMW P. E36
• Manufacturer: MAX

• old version:
• Material: Rubber/Metal
• Fitting Position: Front Axle
• Weight [kg]: 0.67
• Supplementary Article/Info 2: with ball bearing
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle
• Suspension: for vehicles with standard suspension
• Name: TOLMUKAITSE KOMPLEKT,AMORDID
• Manufacturer: SAA

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle
• Weight [kg]: 0.214
• Name: Tolmukaitse komplekt,Amordid
• Manufacturer: FEB

Suspension: for vehicles with sports suspension, for vehicles with M technology General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• old version:
• Material: Rubber/Metal
• Fitting Position: Front Axle
• Weight [kg]: 0.67
• Supplementary Article/Info 2: with ball bearing
• Observe service information:
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Manufacturer: AUTOFREN REPERATURKI
• Name: SE D5-009

• new version:
• Material: Cast Aluminium
• Fitting Position: Front Axle
• Weight [kg]: 0.39
• Supplementary Article/Info 2: with ball bearing
• Observe service information:
• Manufacturer: SWAG
• Name: SW 20 92 4316

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle Left, Front Axle Right
• Supplementary Article/Info 2: with bearing
• Manufacturer: OPTIMAL ZAWIESZENIE

• Fitting Position: Front Axle
• Supplementary Article/Info 2: with ball bearing
• Required quantity: 2
• replacement in pairs recommended:
• Name: Laager - K„„ndmik. BMW P. E36 90-98 ALUMINIOWA
• Manufacturer: MEY

• Quantity per axle: 2
• Fitting Position: Front Axle Left, Front Axle Right
• Supplementary Article/Supplementary Info: with integrated ball bearing
• Observe service information:
• Manufacturer: LMI

for OE number: 1 090 467, 1 092 885, 1 135 582, 31 33 1 090 467, 31 33 1 092 885, 31 33 1 135 582, 31 33 6 764 947, 31 33 6 769 585, 31 33 6 779 613, 31 33 6 795 871, 6 764 947, 6 769 585, 6 779 613, 6 795 871 SVHC: No information available, please contact the manufacturer! Name: Laager - K„„ndmik. BMW P. E36 90-98 LE/PR ALUMINIOWA

• Suspension: for vehicles with sports suspension
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.67
• Required quantity: 2
• Material: Cast Steel
• Supplementary Article/Info 2: with ball bearing
• Manufacturer: CORTECO
• Name: COC 21653086

• Fitting Position: Front Axle
• Name: TOLMUKAITSE KOMPLEKT,AMORDID
• Manufacturer: BIL
• Quality class: Q

Additional information: "Tootja: BILSTEIN
BMW 3(E30)
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
BMW 3(E30)
(kvaliteediklass: Q)"