• Fitting Position: before catalytic converter
• Number of circuits: 4
• Cable Length [mm]: 295
• External Thread [mm]: M18 x 1,5
• Spanner Size: 22
• Lambda Sensor: Regulating Probe
• Lisainfo: Lambda sensor
• Additional information: Lambda sensor

• Fitting Position: after catalytic converter
• Number of circuits: 4
• Switch Point [°C]: 98
• Cable Length [mm]: 1,000
• External Thread [mm]: M18 x 1,5
• Spanner Size: 22
• Lambda Sensor: Heated
• Manufacturer: JP GROUP
• Lisainfo: Lambda sensor
• Additional information: Lambda sensor

• Engine Code: M54 B30 (306S3)
• Construction Year to: 06.2002
• Exhaust System: for pre-catalytic converter
• for OE number: 0015401017
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 655
• Number of pins: 4
• Weight [g]: 114
• Gross Weight [g]: 144
• Manufacturer: DENSO

Lambda Sensor: Regulating Probe, Heated, Finger probe, Lambda Sensor Additional information: "Tootja: DENSO
KLASA C KOMBI (S202)
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
KLASA C KOMBI (S202)
(kvaliteediklass: Q)"

• Length [mm]: 320
• Fabrication Number: ESL-BM-008
• Manufacturer: NTY

Fitting Position: Left Front, Right Front, Front, before catalytic converter, after catalytic converter Lambda Sensor: Regulating Probe, Diagnostic Probe, Thread pre-greased

• Length [mm]: 370
• Fabrication Number: ESL-BM-003
• Manufacturer: NTY

Fitting Position: Left Front, Right Front, Front, before catalytic converter, after catalytic converter Lambda Sensor: Diagnostic Probe, Regulating Probe, Thread pre-greased

• Length [mm]: 990
• Fabrication Number: ESL-BM-002
• Manufacturer: NTY

Fitting Position: Left Front, Right Front, Front, before catalytic converter, after catalytic converter Lambda Sensor: Diagnostic Probe, Regulating Probe, Thread pre-greased

• Length [mm]: 955
• Fabrication Number: ESL-BM-004
• Manufacturer: NTY

Fitting Position: Front, Left Front, Right Front, before catalytic converter, after catalytic converter Lambda Sensor: Diagnostic Probe, Regulating Probe, Thread pre-greased

• Number of circuits: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: KAMOKA

• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Technical Information Number: Universal
• Overall Length [mm]: 325
• Number of pins: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: ASHIKA
• Lisainfo: 43-U04
• Additional information: 43-U04

• Technical Information Number: Universal
• Overall Length [mm]: 325
• Number of pins: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: JAPKO

• Construction Year to: 06.2002, 09.2000
• Lambda Sensor: Regulating Probe, Finger probe
• Block Separation:
• Transmission Type: Manual Transmission, Automatic Transmission
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: MAX
• Lisainfo: MGS-505
• Additional information: MGS-505

Left-/right-hand drive vehicles: for left-hand drive vehicles, for right-hand drive vehicles Fitting Position: Left, for cylinder 1-3, before catalytic converter, after catalytic converter, for cylinder 4-6

• Construction Year to: 09.2000
• Lambda Sensor: Diagnostic Probe, Heated
• Fitting Position: after catalytic converter
• Left-/right-hand drive vehicles: for right-hand drive vehicles
• Transmission Type: Automatic Transmission
• Block Separation:
• Construction Year from: 10.2000
• Number of circuits: 4
• Overall Length [mm]: 990
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Line insulation design: with silicone-coated woven-fibre insulation
• Connector Shape: round
• Thread Size: M18 x 1,5
• Cable Length [mm]: 905
• Conductor Number: 4
• Length [mm]: 1,020
• Number of circuits: 4
• Weight [kg]: 0.174
• Lambda Sensor: Thread pre-greased
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: M54 B30 (306S3)
• Lambda Sensor: Regulating Probe, Heated
• Number of circuits: 4
• Length [mm]: 290
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Lambda Sensor: Regulating Probe, Planar probe
• Length [mm]: 320
• Number of pins: 4
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: M54 B30 (306S3)
• Construction Year to: 06.2002
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 103
• Gross Weight [g]: 152
• Manufacturer: DENSO
• Name: DN DOX-0117
• Quality class: Q

Lambda Sensor: Regulating Probe, Heated, Finger probe, Lambda Sensor Additional information: "Tootja: DENSO
A4 AVANT (8D5, B5),
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
A4 AVANT (8D5, B5),
(kvaliteediklass: Q)"

• Construction Year to: 07.2002
• Fitting Position: Front, before catalytic converter
• Transmission Type: Manual Transmission
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Lambda Sensor: Regulating Probe, Thread pre-greased
• Line insulation design: with silicone-coated woven-fibre insulation
• Thread Size: M18 x 1,5
• Connector Shape: round
• Cable Length [mm]: 330
• Conductor Number: 4
• Length [mm]: 350
• Number of circuits: 4
• Weight [kg]: 0.124
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: M54 B30 (306S3)
• Fitting Position: after catalytic converter
• Left-/right-hand drive vehicles: for right-hand drive vehicles
• Line insulation design: with silicone-coated woven-fibre insulation
• Thread Size: M18 x 1,5
• Conductor Number: 4
• Connector Shape: round
• Length [mm]: 570
• Number of circuits: 4
• Weight [kg]: 0.142
• Lambda Sensor: Thread pre-greased
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Transmission Type: Manual Transmission
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Lambda Sensor: Regulating Probe, Finger probe, Heated
• Fitting Position: before catalytic converter
• Cable Length [mm]: 450
• Name: LAMBDA ANDUR
• Manufacturer: DLP

• Resistor [Ohm]: 2.1
• Number of circuits: 4
• Conductor Number: 4
• Length [mm]: 300
• Cable Length [mm]: 300
• Lambda Sensor: Heated
• Name: LAMBDA ANDUR
• Manufacturer: MAG

• Transmission Type: Automatic Transmission
• Left-/right-hand drive vehicles: for right-hand drive vehicles
• Lambda Sensor: Regulating Probe, Finger probe, Heated
• Fitting Position: before catalytic converter
• Cable Length [mm]: 555
• Manufacturer: DELPHI
• Name: DE ES11114-12B1

• Lambda Sensor: Diagnostic Probe
• Voltage [V]: 12
• Length [mm]: 990
• Number of circuits: 4
• Weight [kg]: 0.18
• Resistor [Ohm]: 2.1
• Operating Mode: Electric
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 09SKV665

• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Lambda Sensor: Regulating Probe, Finger probe, Heated
• Engine Code: M54306S3
• Cable Length [mm]: 990
• Name: LAMBDA ANDUR
• Manufacturer: DLP

Additional information: "Tootja: DELPHI
X5 (E53), 05.00-
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
X5 (E53), 05.00-
(kvaliteediklass: PJ)"

• Length [mm]: 990
• Resistor [Ohm]: 2.1
• Conductor Number: 4
• Number of circuits: 4
• Cable Length [mm]: 990
• Lambda Sensor: Heated
• Name: LAMBDA ANDUR
• Manufacturer: MAG

• Transmission Type: Manual Transmission
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Lambda Sensor: Regulating Probe, Finger probe, Heated
• Fitting Position: before catalytic converter
• Cable Length [mm]: 300
• Name: LAMBDA ANDUR
• Manufacturer: DLP
• Quality class: PJ

Additional information: "Tootja: DELPHI
X3 (E83), 01.04-
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
X3 (E83), 01.04-
(kvaliteediklass: PJ)"

• Lambda Sensor: Regulating Probe, Lambda Sensor
• Engine Code: M54 B30 (306S3)
• Voltage [V]: 12
• Length [mm]: 430
• Number of circuits: 4
• Weight [kg]: 0.1
• Operating Mode: Electric
• Warranty: 3 years warranty
• Name: CE 09SKV080
• Manufacturer: ESEN SKV

• Lambda Sensor: Regulating Probe
• Voltage [V]: 12
• Length [mm]: 350
• Number of circuits: 4
• Weight [kg]: 0.14
• Resistor [Ohm]: 2.1
• Operating Mode: Electric
• Warranty: 3 years warranty
• Name: CE 09SKV666
• Manufacturer: ESEN SKV

• Engine Code: M54 B30 (306S3)
• Fitting Position: after catalytic converter
• Left-/right-hand drive vehicles: for right-hand drive vehicles
• Length [mm]: 800
• Cable Length [mm]: 800
• Conductor Number: 4
• Lambda Sensor: Heated, Planar probe, Thread pre-greased
• Available as universal article as well, see article no.: 1.997.007
• Number of circuits: 4
• Name: LAMBDA ANDUR
• Manufacturer: EPS

• Fitting Position: Rear, before catalytic converter
• Lambda Sensor: Heated
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 1,020
• Weight [kg]: 0.134
• Name: SW 33 10 4013
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year to: 06.2002, 09.2000
• Lambda Sensor: Regulating Probe, Diagnostic Probe
• Block Separation:
• Transmission Type: Automatic Transmission, Manual Transmission
• Construction Year from: 10.2000
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Manufacturer: BOSCH
• Name: BS 0258986505

Fitting Position: before catalytic converter, after catalytic converter, for cylinder 1-3, for cylinder 4-6 Left-/right-hand drive vehicles: for left-hand drive vehicles, for right-hand drive vehicles

• Engine Code: M54 B30, M54 B30 (306S3)
• Line insulation design: with silicone-coated woven-fibre insulation
• Number of pins: 4
• for OE number: V99760001
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Length [mm]: 350
• Exhaust System: after catalytic converter
• Manufacturer: VEMO GERMANY

Lambda Sensor: Regulating Probe, Finger probe, Heated, Thread pre-greased Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Rear, before catalytic converter
• Lambda Sensor: Heated
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 1,020
• Weight [kg]: 0.134
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year from: 09.2000
• Fitting Position: Rear, Exhaust Manifold, before catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Lambda Sensor: Planar probe, Heated, Thread pre-greased
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Manufacturer: VEMO GERMANY

Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Line insulation design: with silicone-coated woven-fibre insulation
• Thread Size: M18 x 1,5
• Connector Shape: round
• Conductor Number: 4
• Length [mm]: 300
• Number of circuits: 4
• Weight [kg]: 0.123
• Lambda Sensor: Thread pre-greased
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Transmission Type: Manual Transmission, Automatic Transmission
• Left-/right-hand drive vehicles: for right-hand drive vehicles
• Lambda Sensor: Regulating Probe, Finger probe, Heated
• Fitting Position: before catalytic converter
• Block Separation:
• Cable Length [mm]: 970
• Name: LAMBDA ANDUR
• Manufacturer: DLP

• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Length [mm]: 350
• Number of pins: 4
• Technical Information Number: Universal 77004
• Manufacturer: FAE
• Additional information: MD77243
• Lisainfo: MD77243

• Lambda Sensor: Finger probe
• Thread Size: M18 x 1,5
• Cable Length [mm]: 350
• Number of pins: 4
• Name: Lambda andur
• Manufacturer: MEY

Fitting Position: for cylinder 1-3, for cylinder 4-6, before catalytic converter

• Engine Code: M54 B30 (306S3)
• Left-/right-hand drive vehicles: for right-hand drive vehicles
• Fitting Position: after catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Conductor Number: 4
• Connector Shape: round
• Cable Length [mm]: 675
• Thread Size: M18 x 1,5
• Length [mm]: 800
• Number of circuits: 4
• Weight [kg]: 0.161
• Lambda Sensor: Thread pre-greased
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Left-/right-hand drive vehicles: for right-hand drive vehicles
• Transmission Type: Manual Transmission
• Production date from: 01.06.2000
• Production date to: 30.09.2000
• Lambda Sensor: Finger probe
• Thread Size: M18 x 1,5
• Cable Length [mm]: 800
• Number of pins: 4
• Fitting Position: after catalytic converter
• Name: Lambda andur
• Manufacturer: MEY

• Lambda Sensor: Lambda Sensor
• Cable Length [mm]: 800
• Number of circuits: 4
• Manufacturer: ERA

• Construction Year to: 08.2000
• Lambda Sensor: Diagnostic Probe
• Transmission Type: Manual Transmission
• Left-/right-hand drive vehicles: for right-hand drive vehicles
• Fitting Position: Right, after catalytic converter
• Length [mm]: 800
• Number of pins: 4
• Technical Information Number: Universal 77004
• Manufacturer: FAE

• Construction Year to: 06.2002
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Number of circuits: 4
• Overall Length [mm]: 320
• Available as universal article as well, see article no.: 0258986505
• Recommended change interval [km]: 160,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Fitting Position: for cylinder 4-6, before catalytic converter
• Left-/right-hand drive vehicles: for right-hand drive vehicles
• Lambda Sensor: Finger probe
• Thread Size: M18 x 1,5
• Cable Length [mm]: 1,020
• Number of pins: 4
• Name: Lambda andur
• Manufacturer: MEY

• Construction Year to: 06.2002
• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Number of circuits: 4
• Overall Length [mm]: 990
• Available as universal article as well, see article no.: 0258986505
• Recommended change interval [km]: 160,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Construction Year to: 09.2000
• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter, Right
• Transmission Type: Manual Transmission
• Left-/right-hand drive vehicles: for right-hand drive vehicles
• Number of circuits: 4
• Overall Length [mm]: 765
• Available as universal article as well, see article no.: 0258986505
• Recommended change interval [km]: 160,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS
• Lisainfo: 0258003561 BOSCH
• Additional information: 0258003561 BOSCH

• Construction Year to: 09.2000
• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter, Left
• Transmission Type: Manual Transmission
• Left-/right-hand drive vehicles: for right-hand drive vehicles
• Number of circuits: 4
• Overall Length [mm]: 580
• Available as universal article as well, see article no.: 0258986505
• Recommended change interval [km]: 160,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Construction Year to: 09.2000, 06.2002
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter, for cylinder 1-3
• Transmission Type: Automatic Transmission
• Left-/right-hand drive vehicles: for right-hand drive vehicles
• Block Separation:
• Construction Year from: 10.2000
• Number of circuits: 4
• Overall Length [mm]: 570
• Available as universal article as well, see article no.: 0258986505
• Recommended change interval [km]: 160,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Construction Year to: 09.2000, 06.2002
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter, for cylinder 4-6
• Transmission Type: Automatic Transmission, Manual Transmission
• Left-/right-hand drive vehicles: for right-hand drive vehicles
• Block Separation:
• Construction Year from: 10.2000
• Number of circuits: 4
• Overall Length [mm]: 990
• Available as universal article as well, see article no.: 0258986505
• Recommended change interval [km]: 160,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Construction Year to: 06.2002
• Engine Code: M54B30
• Fitting Position: before catalytic converter
• Lambda Sensor: Planar probe, Thread pre-greased, Heated
• Number of pins: 4
• Cable Length [mm]: 1,020
• Thread Size: M18x1,5
• Switch Pressure [bar]: 4
• Weight [kg]: 0.17
• Name: VA 368214
• Manufacturer: VALEO

• Construction Year to: 09.2000
• Fitting Position: Rear, Front
• Left-/right-hand drive vehicles: for right-hand drive vehicles
• Lambda Sensor: Regulating Probe, Heated
• Voltage [V]: 12
• Conductor Number: 4
• Cable Length [mm]: 980
• Name: LAMBDA ANDUR
• Manufacturer: PIE

• Transmission Type: Manual Transmission, Automatic Transmission
• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Manufacturer Restriction: 4-adrig
• Cable Length [mm]: 990
• Thread Size: M 18x1,5
• Manufacturer: METZGER