• Pistikkontaktide arv: 2
• Pistikukatte kuju: ovaalne
• Materjal: Plastik
• Manufacturer: ABAKUS

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Pistikukatte kuju: ovaalne
• Manufacturer: ABAKUS

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Piirangutega toode/piirangu info 2: ilma andurita, ilma kaablita
• Piirangutega toode/piirangu info: Pistikuhülsi korpusega
• Manufacturer: ABAKUS LORO

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Connector Shape: oval
• Number of pins: 2
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Pistikkontaktide arv: 2
• Pistikukatte kuju: ovaalne
• Piirangutega toode/piirangu info 2: koos kaabliga
• Manufacturer: ABAKUS

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Värv: must
• Installatsiooni pool: kese, ees, kahepoolne, taga, sees
• Seerianumber: EPDC-BM-005
• Manufacturer: NTY

• Vehicle Equipment: for vehicles with sports package
• Anduritüüp: Ultraheliandur
• Installatsiooni pool: kahepoolne, ees, taga, väljas, sees, kese
• Seerianumber: EPDC-BM-004
• Manufacturer: NTY

• Fitting Position: Left, Longitudinal, Right, inner, outer
• Construction Year from: 09.2017
• Construction Year to: 07.2021
• Colour: black
• Installatsiooni pool: ees, taga
• Pinge [V]: 12
• Kuju: gewinkelt
• Anduritüüp: Ultraheliandur
• Pistikkontaktide arv: 3
• Garantii: 3 aastat garantii
• Kaal (kg): 0,02
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Name: CE 28SKV015
• Manufacturer: ESEN SKV

• Length [mm]: 66
• Number of connectors: 2
• Material: Plastic
• Weight [kg]: 0.004
• Name: ANDUR,VŽLISTEMPERATUUR
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year from: 09.2017
• Fitting Position: Rear
• Colour: black
• Supplementary Article/Supplementary Info: with gasket/seal
• Manufacturer: MAGNETI MARELLI
• Name: MM SDP107

• Engine Code: B58 B30 A
• Fitting Position: Lower
• Keermemõõt: M12x1,5
• Võtmekaugus: 17
• Name: EP 1.830.405
• Manufacturer: EPS

• Fitting Position: Left, Right, outer
• Construction Year from: 09.2017
• Construction Year to: 07.2021
• Colour: black
• Installatsiooni pool: ees, taga
• Pinge [V]: 12
• Kuju: gewinkelt
• Anduritüüp: Ultraheliandur
• Pistikkontaktide arv: 3
• Garantii: 3 aastat garantii
• Kaal (kg): 0,02
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY

• Engine Code: B58 B30 A
• Fitting Position: Lower
• Thread Size: M12x1,5
• Spanner Size: 17
• Manufacturer: FACET

• Engine Code: B58 B30 A
• Required quantity: 1
• Name: DETONATSIOONIANDUR
• Manufacturer: EPS

• Fitting Position: outer
• Installatsiooni pool: taga, ees
• Anduritüüp: Ultraheliandur
• Värv: must
• Kuju: gewinkelt
• Piirangutega toode/piirangu info: koos tihendiga
• Ühenduste arv: 3
• Quality class: PJ
• Name: Parking sensor

• Engine Code: B58 B30 A
• Required quantity: 1
• Manufacturer: FACET

• Fitting Position: Rear Axle Right, Rear Axle Left
• Number of pins: 2
• Supplementary Article/Info 2: with cable
• Length [mm]: 865
• Connector Shape: oval
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Left, Right
• Colour: black
• Supplementary Article/Supplementary Info: with gasket/seal
• Name: Sensor, parkimisabi
• Manufacturer: MAG

• Fitting Position: Left, Right, outer
• Construction Year from: 09.2017
• Construction Year to: 07.2021
• Colour: black
• Installatsiooni pool: ees, taga
• Pinge [V]: 12
• Kuju: gewinkelt
• Anduritüüp: Ultraheliandur
• Pistikkontaktide arv: 3
• Garantii: 3 aastat garantii
• Kaal (kg): 0,02
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY
• Name: CE 28SKV071

• Anduritüüp: NTC-andur
• Installatsiooni sügavus (mm): 40
• Ühenduste arv: 2
• Manufacturer: ERA

• Fitting Position: Front Axle Left, Front Axle Right
• Braking/Driving Dynamics: for vehicles with ABS
• Supplementary Article/Info 2: with cable
• Number of pins: 2
• Length [mm]: 780
• Connector Shape: oval
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of pins: 3
• Name: DE SS12009-12B1
• Manufacturer: DELPHI

• Required quantity: 2
• Pinge [V]: 12
• Pistikkontaktide arv: 3
• Anduritüüp: Hallsensor
• Piirangutega toode/piirangu info 2: ilma kaablita
• Korpusevärv: must
• Name: CZUJNIK POO½ENIA WAKA ROZRZ. BMW 1 E81
• Manufacturer: BRM

• Number of pins: 2
• Supplementary Article/Info 2: without cable
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: B58 B30 A
• Quantity: 1
• Sensor Type: Piezoelectric Sensor
• Number of pins: 2
• Name: CZUJNIK SPALANIA STUKOWEGO BMW 1 11-
• Manufacturer: MEY

• Fitting Position: outer, Front
• Colour Code: GRU
• Colour: black
• Surface: primed
• Number of pins: 3
• Chemical Properties: Paintable
• Sensor Type: Ultrasonic Sensor
• Supplementary Article/Supplementary Info: with gasket/seal
• Always compare old and new part (in particular OE No.):
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Construction Year from: 11.2017
• Manufacturer: BOSCH

• Height [mm]: 27.9
• Sensor Type: Hall Sensor
• Number of connectors: 3
• Manufacturer: VERNET

• Length [mm]: 66
• Number of connectors: 2
• Material: Plastic
• Weight [kg]: 0.004
• Name: SW 20 92 6015
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Required quantity: 1
• Name: CZUJNIK CI—N. POWIETRZA BMW 3 320I 15-
• Manufacturer: BRM

• Manufacturer Restriction: BMW, Ford, Hyundai, Kia
• Cable Length [mm]: 300
• Number of pins: 2
• Cable Cross Section [mm²]: 0.5
• Socket Width [mm]: 0.64
• Temperature range from [°C]: -40
• Temperature range to [°C]: +125
• Cable insulation material: Silicone
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Plug housing design: Plug sleeve housing
• SVHC: No SVHC present!
• Manufacturer: HBE

Name: WI¤ZKA ELEKTRYCZNA CZUJNIK ZU½YCIA KLOC. HAM. 2 PRZEW.

• Exhaust System: before turbocharger
• Garantii: 3 aastat garantii
• Kaal (kg): 0,03
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV ESEN

• Quantity: 1
• Number of pins: 4
• Pressure from [kPA]: 20
• Name: CZUJNIK CI—N. POWIETRZA BMW 3 15-
• Manufacturer: DLP

• Exhaust System: before soot particulate filter
• Number of pins: 3
• Opening pressure [kPa]: 14
• Manufacturer: DLP

Name: CZUJNIK CI—N. SPALIN BMW 114D, 320I, X3 XDRIVE 20D 09-

• Fitting Position: inner, Left, Right, Front
• Required quantity: 4
• Supplementary Article/Supplementary Info: with gaskets/seals
• Diameter [mm]: 15.4
• Chemical Properties: Paintable
• Name: Sensor, parkimisabi
• Manufacturer: TRI

• Fitting Position: Rear Axle
• pikkus üle kõige (mm): 860
• Pikkus (mm): 45
• Anduritüüp: Aktiivne andur
• Pistiku värv: must
• Kaablipikkus (mm): 760
• paaris tootenumbrid: 32027
• Kaal (kg): 0,05
• Manufacturer: A.B.S.

• Required quantity: 2
• Engine Code: B58 B30 A
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with seal ring
• Assy./disassy. by qualified personnel required!:
• Name: Andur,Nukkvollipositsioon
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Fitting Position: outer, Left, Right, Front
• Required quantity: 2
• Name: Sensor, parkimisabi
• Manufacturer: TRI

Vehicle Equipment: for vehicles with semi-autom. park assist (parallel parking)

• Sensor Type: Hall Sensor
• Number of pins: 3
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Seerianumber: EBP-BM-009
• Manufacturer: NTY
• Name: NTY EBP-BM-009

• Engine Code: B58 B30 A
• Exhaust System: before soot particulate filter
• Väljundpinge alates [V]: 0,5
• Väljundpinge kuni [V]: 4,5
• Name: Andur,ohuvotu rohk
• Manufacturer: EPS

• Emission Standard: Euro 6
• Installatsiooni pool: enne tahmafiltrit
• Pistikkontaktide arv: 3
• Ühenduste arv: 2
• Piirangutega toode/piirangu info 2: ilma ühendusjuhtmestikuta
• Garantii: 3 aastat garantii
• Kaal (kg): 0,04
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY

Väljalaskesüsteem: Sõidukile tehases sisseehitatud tahma-/partiklifiltriga

• Required quantity: 2
• Sensor Type: Hall Sensor
• Number of pins: 3
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Manufacturer: VALEO
• Name: VA 366149

• Engine Code: B58 B30 A
• Keermemõõt: M10x1
• Võtmekaugus: 24
• Name: EP 1.980.015
• Manufacturer: EPS

• Construction Year from: 11.2017
• can be programmed:
• Colour: silver
• Frequency Range [MHz]: 433
• Material: Steel
• Name: BS F026C00466
• Manufacturer: BOSCH

• Construction Year from: 11.2017
• can be programmed:
• Colour: black
• Frequency Range [MHz]: 433
• Material: Rubber
• Manufacturer: BOSCH
• Name: BS F026C00469

• Construction Year from: 11.2017
• can be programmed:
• Colour: Titanium
• Frequency Range [MHz]: 433
• Material: Steel
• Manufacturer: BOSCH
• Name: BS F026C00467
• Lisainfo: F026C00467 BOSCH
• Additional information: F026C00467 BOSCH

• Exhaust System: before soot particulate filter
• for OE number: 13628570686
• Manufacturer: NRF

• Required quantity: 2
• Fitting Position: both sides, outer, Front
• Number of pins: 3
• Chemical Properties: Paintable
• Mounting Type: mounting
• Socket colour: brown
• Assy./disassy. by qualified personnel required!:
• Sensor Type: Ultrasonic Sensor
• Manufacturer: HELLA ELEKTRYKA

Vehicle Equipment: for vehicles with semi-autom. park assist (parallel parking) Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: B58 B30 A
• Thread Size: M10x1
• Spanner Size: 24
• Manufacturer: FACET

• Engine Code: B58 B30 A
• Surve alates [kPA]: 27
• Surve kuni [kPA]: 400
• Väljundpinge alates [V]: 0,25
• Väljundpinge kuni [V]: 4,508
• Name: ANDUR, HEITGAASISURVE
• Manufacturer: EPS

• Number of connectors: 3
• Weight [kg]: 0.014
• for OE number: 13 62 7 804 742
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Anduritüüp: Hallsensor
• valikuliselt:
• Pistikkontaktide arv: 3
• Installatsiooni sügavus (mm): 28
• alternatiivne remondikomplekt: 550604
• Manufacturer: ERA

• Required quantity: 4
• Fitting Position: both sides, inner, Rear, Front
• Number of pins: 3
• Chemical Properties: Paintable
• Mounting Type: mounting
• Socket colour: black
• Assy./disassy. by qualified personnel required!:
• Sensor Type: Ultrasonic Sensor
• Name: HE 6PX358270491
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: B58 B30 A
• Pressure from [kPA]: 27
• Pressure to [kPA]: 400
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 4.508
• Manufacturer: FACET

• Fitting Position: Rear Axle
• Required quantity: 2
• Cable Length [mm]: 812
• Fitting Depth [mm]: 45.4
• Number of pins: 2
• Name: CZUJNIK ABS BMW T. X3 17- LE/PR
• Manufacturer: TRI

• Engine Code: B58 B30 A
• Name: EP 1.953.826
• Manufacturer: EPS

• Pistikkontaktide arv: 3
• Piirangutega toode/piirangu info: koos tihendiga
• Värv: must
• Materjal: Plastik
• Manufacturer: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Engine Code: B58 B30 A
• Exhaust System: before soot particulate filter
• Output Voltage, from [V]: 0.5
• Output Voltage, up to [V]: 4.5
• Manufacturer: FACET

• Number of connectors: 3
• Weight [kg]: 0.014
• for OE number: 13 62 7 804 742
• Name: SW 33 10 1713
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: B58 B30 A
• Manufacturer: FACET

• Length [mm]: 66
• Material: Plastic
• Number of connectors: 2
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Kaal (kg): 0,05
• Kontrolltähistus: CE, FCC, IC
• Sagedusala [MHz]: 433
• Ventiili värv: hõbedane
• Korpusevärv: hall
• Montaaživiis: kruvitud
• Montaažiinfo: TPMS sensor needs to be programmed before use.
• Manufacturer: BH SENS HUF

• Kaal (kg): 0,05
• Kontrolltähistus: CE, FCC, IC
• Sagedusala [MHz]: 433
• Ventiili värv: hõbedane
• Korpusevärv: must
• Montaaživiis: kruvitud
• Montaažiinfo: TPMS sensor needs to be programmed before use.
• Manufacturer: BH SENS HUF

• Fitting Position: outer, both sides, Front, Rear
• Construction Year from: 09.2017
• Sensor Type: Ultrasonic Sensor
• Number of pins: 3
• Chemical Properties: Paintable
• Manufacturer: FAE ELEKTRYKA

• Kaal (kg): 0,05
• Kontrolltähistus: CE, FCC, IC
• Sagedusala [MHz]: 433
• Ventiili värv: hõbedane
• Korpusevärv: must
• Montaaživiis: kruvitud
• Montaažiinfo: TPMS sensor needs to be programmed before use.
• Manufacturer: BH SENS HUF

Manufacturer: NRF

• Connector Shape: D Shape
• Number of pins: 3
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Pistikkontaktide arv: 3
• Pistikukatte kuju: ovaalne
• Manufacturer: ERA

• Engine Code: B58 B30 A
• Required quantity: 2
• Number of pins: 3
• Fitting Depth [mm]: 27.8
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: TRI

• Kaal (kg): 0,05
• Kontrolltähistus: CE, FCC, IC
• Sagedusala [MHz]: 433
• Ventiili värv: hõbedane
• Korpusevärv: titaan
• Montaaživiis: kruvitud
• Montaažiinfo: TPMS sensor needs to be programmed before use.
• Manufacturer: BH SENS HUF

• Construction Year from: 11.2017
• can be programmed:
• Colour: black
• Frequency Range [MHz]: 433
• Material: Steel
• Manufacturer: BOSCH

• Required quantity: 1
• Pistikkontaktide arv: 3
• Anduritüüp: Induktiivandur
• Piirangutega toode/piirangu info 2: ilma kaablita
• Korpusevärv: must
• Name: CZUJNIK POO½ENIA WAU KORB. BMW 1 F20 118D 11-
• Manufacturer: BRM

• Unprogrammed:
• Supplementary Article/Info 2: Control Unit/Software must be trained/updated
• Frequency Range [MHz]: 433
• Tightening Torque [Nm]: 4
• Valve stem material: Solid rubber
• Assy./disassy. by qualified personnel required!:
• Name: Rattaandur, rehvirohu kontrollssteem
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years. Technical Information: "Universal tyre pressure sensors from HELLA. A wide range of vehicles can be covered with just one type o f sensor. Now available in different looks and colours. The sensor must be programmed and, if necessary, taught-in."

• Unprogrammed:
• Supplementary Article/Info 2: Control Unit/Software must be trained/updated
• Frequency Range [MHz]: 433
• Tightening Torque [Nm]: 4
• Colour: black
• Assy./disassy. by qualified personnel required!:
• Name: Rattaandur, rehvirohu kontrollssteem
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years. Technical Information: "Universal tyre pressure sensors from HELLA. A wide range of vehicles can be covered with just one type o f sensor. Now available in different looks and colours. The sensor must be programmed and, if necessary, taught-in."

• Unprogrammed:
• Supplementary Article/Info 2: Control Unit/Software must be trained/updated
• Frequency Range [MHz]: 433
• Tightening Torque [Nm]: 4
• Valve stem material: Aluminium
• Assy./disassy. by qualified personnel required!:
• Name: Rattaandur, rehvirohu kontrollssteem
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years. Technical Information: "Universal tyre pressure sensors from HELLA. A wide range of vehicles can be covered with just one type o f sensor. Now available in different looks and colours. The sensor must be programmed and, if necessary, taught-in."

• External Thread Size: M10 x 1
• Number of connectors: 3
• Weight [kg]: 0.04
• for OE number: 13 53 8 643 665
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Sensor Type: Hall Sensor
• Number of pins: 3
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year from: 11.2017
• Supplementary Article/Info 2: High Pressure Side
• Fuel Mixture Formation: Direct Injection
• Name: ANDUR,KšTUSEROHK
• Manufacturer: BOS

• Fitting Position: Front Axle
• Length [mm]: 777
• Sensor Type: Active sensor
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Left, Right, Front Axle
• Required quantity: 2
• Number of pins: 2
• Cable Length [mm]: 777
• Sensor Type: Active sensor
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PU358216071
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Fitting Position: Left, Right, Rear Axle
• Required quantity: 2
• Number of pins: 2
• Cable Length [mm]: 868
• Sensor Type: Active sensor
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PU358216131
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Kaal (kg): 0,05
• Kontrolltähistus: CE, FCC, IC
• Värv: oranž
• Sõidukivarustus: Rehvirõhu kontrollsüsteemiga sõidukite jaoks
• Sagedusala [MHz]: 433
• Ventiili värv: hõbedane
• Montaaživiis: kruvitud
• Montaažiinfo: TPMS sensor needs to be programmed before use.
• Name: Rattaandur, rehvirohu kontrollssteem
• Manufacturer: HUF
• Additional information: UVS4050
• Lisainfo: UVS4050

• Kaal (kg): 0,05
• Kontrolltähistus: CE, FCC, IC
• Värv: oranž
• Sõidukivarustus: Rehvirõhu kontrollsüsteemiga sõidukite jaoks
• Sagedusala [MHz]: 433
• Ventiili värv: must
• Montaaživiis: kruvitud
• Montaažiinfo: TPMS sensor needs to be programmed before use.
• Name: Rattaandur, rehvirohu kontrollssteem
• Manufacturer: HUF

• Construction Year from: 10.2017
• Frequency Range [MHz]: 433
• Valve colour: silver
• Tightening Torque [Nm]: 8
• Mounting Type: Bolted
• Supplementary Article/Info 2: with groove, with valves
• Permissible maximum speed [km/h]: 250
• Housing Colour: black
• Name: Rattaandur, rehvirohu kontrollssteem
• Manufacturer: SKF

• External Thread Size: M10 x 1
• Number of connectors: 3
• Weight [kg]: 0.04
• for OE number: 13 53 8 643 665
• Name: SW 33 10 6949
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front, Rear
• Anduritüüp: Ultraheliandur
• Pealispind: krundeeritud
• Pistikkontaktide arv: 3
• Manufacturer: AIC

Montaažiinfo: Attention, test the sensor for function before painting. Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.