• Fabrication Number: ECT-BM-017
• Manufacturer: NTY

• Number of pins: 2
• Connector Shape: oval
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: B57 D30 A
• Required quantity: 1
• Housing Colour: black
• Number of pins: 2
• Connector Shape: oval
• Name: Andur,sisendohu temperatuur
• Manufacturer: MAX

• Thread Size: M 12x125
• Sensor Type: NTC Sensor
• Number of pins: 2
• Housing Colour: black
• Manufacturer: FAE

• Engine Code: B57 D30 A
• Thread Size: M12x1,5
• Manufacturer: FACET

• Engine Code: B57 D30 A
• Thread Size: M12x1,5
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Quantity: 1
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: B57 D30 A
• Operating voltage [V]: 12
• Sensor Type: NTC Sensor
• Number of pins: 2
• Name: Andur,sisendohu temperatuur
• Manufacturer: MEY

• Engine Code: B57 D30 A
• Required quantity: 1
• Manufacturer: FACET

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Name: CZUJNIK POO½ENIA WAKA ROZRZ. BMW 1 E81
• Manufacturer: BRM

• Engine Code: B57 D30 A
• Required quantity: 1
• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: EPS

• Height [mm]: 27.9
• Sensor Type: Hall Sensor
• Number of connectors: 3
• Manufacturer: VERNET

• Required quantity: 1
• Number of pins: 2
• Assy./disassy. by qualified personnel required!:
• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 3
• Colour: black
• Connector Shape: oval
• Fabrication Number: ECS-BM-006
• Manufacturer: NTY

Exhaust System: for vehicles with factory fitted soot -/particulate filter

Manufacturer: VERNET

• Quantity: 1
• Number of pins: 3
• Pressure from [kPA]: 50
• Manufacturer: DLP

Name: CZUJNIK CI—NIENIA POWIETRZA BMW 114D, X7 XDRIVE 30D 10-

• Required quantity: 1
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with seal ring
• Assy./disassy. by qualified personnel required!:
• Name: Andur,Nukkvollipositsioon
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Exhaust System: before soot particulate filter
• Alternatively:
• Number of pins: 3
• Opening pressure [kPa]: 14
• Manufacturer: DLP

Name: CZUJNIK CI—N. SPALIN BMW 114D, 320I, X3 XDRIVE 20D 09-

• Number of pins: 3
• Supplementary Article/Info 2: without connection line
• Connector Shape: oval
• Guarantee: 3 years guarantee
• Weight [kg]: 0.04
• Suction pipe connector diameter [mm]: 7.8
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Exhaust System: before exhaust gas recirculation
• Manufacturer: NRF

• Number of pins: 3
• Opening pressure [kPa]: 5
• Name: CZUJNIK CI—N. SPALIN BMW 116D, X7 XDRIVE M50D 14-
• Manufacturer: DLP

• Fabrication Number: ECS-BM-004
• Manufacturer: NTY

• Fitting Position: Intake Manifold
• Connector Shape: oval
• Number of pins: 3
• Supplementary Article/Info 2: with seal ring
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: B57 D30 A
• Exhaust System: before soot particulate filter
• Output Voltage, from [V]: 0.5
• Output Voltage, up to [V]: 4.5
• Name: Andur,ohuvotu rohk
• Manufacturer: EPS

• Emission Standard: Euro 6
• Fitting Position: before soot particulate filter
• Number of pins: 3
• Number of connectors: 2
• Supplementary Article/Info 2: without connection line
• Guarantee: 3 years guarantee
• Weight [kg]: 0.04
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

Exhaust System: for vehicles with factory fitted soot -/particulate filter

• Required quantity: 1
• Sensor Type: Hall Sensor
• Number of pins: 3
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Manufacturer: VALEO
• Name: VA 366149

• Exhaust System: before turbocharger
• Manufacturer: NRF

• Number of connectors: 3
• Fabrication Number: ECS-BM-008
• Manufacturer: NTY

• Exhaust System: before soot particulate filter
• for OE number: 13628570686
• Manufacturer: NRF

• Sensor Type: Hall Sensor
• Alternatively:
• Number of pins: 3
• Fitting Depth [mm]: 28
• Alternative Repair Kit: 550604
• Manufacturer: ERA

• Engine Code: B57 D30 A
• Required quantity: 1
• Pressure from [kPA]: 27
• Pressure to [kPA]: 400
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 4.508
• Manufacturer: FACET

• Engine Code: B57 D30 A
• Exhaust System: before turbocharger
• Thread Size: M14x1,5
• Spanner Size: 27
• Manufacturer: FACET

• Engine Code: B57 D30 A
• Required quantity: 1
• Pressure from [kPA]: 27
• Pressure to [kPA]: 400
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 4.508
• Name: ANDUR, HEITGAASISURVE
• Manufacturer: EPS

• Engine Code: B57 D30 A
• Exhaust System: before soot particulate filter
• Output Voltage, from [V]: 0.5
• Output Voltage, up to [V]: 4.5
• Manufacturer: FACET

• Connector Shape: D Shape
• Number of pins: 3
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Required quantity: 1
• Number of pins: 3
• Fitting Depth [mm]: 27.8
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: TRI

• Sensor Type: Hall Sensor
• Number of pins: 3
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of pins: 3
• Name: Andur, heitgaasisurve
• Manufacturer: MEY

• Supplementary Article/Info 2: with cable
• Cable Length [mm]: 305
• Overall Length [mm]: 455
• Number of pins: 2
• Connector Shape: oval
• Socket colour: black
• Thread Size: M12 x 1,25
• Spanner Size: 14
• Sensor Type: NTC Sensor
• Manufacturer: VALEO

• Oxygen Sensor: Diagnostic Probe
• Fabrication Number: ESL-BM-030
• Length [mm]: 660
• Number of pins: 4
• Connector Shape: oval
• Observe service information:
• Manufacturer: NTY

• Fabrication Number: EGT-BM-023
• Cable Length [mm]: 597
• Number of pins: 2
• Sensor Type: NTC Sensor
• for OE number: 13628507629
• Manufacturer: NTY

• Fabrication Number: EGT-BM-015
• Fitting Position: before SCR catalytic converter
• Number of pins: 2
• Sensor Type: NTC Sensor, Closed-type Sensor
• Cable Length [mm]: 270
• Manufacturer: NTY

• Emission Standard: Euro 6
• Fitting Position: before soot particulate filter
• Supplementary Article/Info 2: without connection line
• Number of connectors: 2
• Number of pins: 3
• Manufacturer: METZGER

Exhaust System: for vehicles with factory fitted soot -/particulate filter

• Fitting Position: Particulate Filter
• Transmission Type: Automatic Transmission
• Required quantity: 1
• for OE number: 13628570234
• Quality: OE
• Thread Size: M12x1.25
• Cable Length [mm]: 332
• Sensor Type: NTC Sensor
• Number of pins: 2
• Weight [g]: 35
• Gross Weight [g]: 63
• Manufacturer: DENSO
• Name: DN DET-0151

• Fitting Position: EGR valve at manifold
• Cable Length [mm]: 375
• Overall Length [mm]: 466
• Number of pins: 2
• Manufacturer: METZGER

• Fabrication Number: EGT-BM-020
• Exhaust System: for soot particulate filter
• Number of pins: 2
• Sensor Type: Closed-type Sensor
• Cable Length [mm]: 216
• Manufacturer: NTY

• Exhaust System: before soot particulate filter
• Quantity: 1
• Cable Length [mm]: 310
• Number of pins: 2
• Name: DE TS30368-12B1
• Manufacturer: DELPHI

• Supplementary Article/Info 2: High Pressure Side
• Required quantity: 1
• Fitting Position: after EGR cooler
• Overall Length [mm]: 465
• Cable Length 1 [mm]: 375
• Spanner Size: 14
• Thread Size: M10x1,25
• Fitting Depth [mm]: 16
• Number of pins: 2
• Socket colour: black
• Form 1: straight
• Sensor Type: PTC
• Voltage [V]: 5
• Temperature range from [°C]: -40
• Temperature range to [°C]: 999
• Manufacturer: BREMI

• Colour: black
• Number of pins: 3
• Supplementary Article/Supplementary Info: without gasket/seal
• Name: Andur,Nukkvollipositsioon
• Manufacturer: VDO

• Fitting Position: after soot particulate filter
• Overall Length [mm]: 453
• Cable Length [mm]: 310
• Fitting Depth [mm]: 59
• Connector Shape: D Shape
• Connecting thread: M12x1.25-6e
• Number of pins: 2
• Operating temperature to [°C]: 1,000
• Manufacturer: ERA

• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Overall Length [mm]: 660
• Name: Lambda andur
• Manufacturer: BOS

• Pressure hose connector diameter [mm]: 5, 6.5
• Length [m]: 1
• Material: Silicone
• Chemical Properties: Oil resistant
• Temperature range from [°C]: -40
• Temperature range to [°C]: +350
• Clamping Range from [mm]: 10, 11, 11.5, 12.5
• Clamping Range to [mm]: 12.5, 13.5, 14, 15
• SVHC: No SVHC present!
• Manufacturer: HBE

Exhaust System: for vehicles with factory fitted soot -/particulate filter Supplementary Article/Info 2: with connection line, with protection hose, with marten protection, with clamps Technical Information: Using this repair kit, defective connecting hoses between the diesel particle filter (DPF) and the differential pressure sensor can be quickly and simply replaced. Pine marten bites may also be responsible for damage, and not just mechanical and thermic influences. That's why this set is supplied with protective hoses that are resistant to both high temperatures and pine marten bites. They protect the silicone pressure lines from external influences. The spring band clamps included in the scope of supply ensure that the hoses are held securely. Name: Remondikomplekt, survetorustik (tahma-/partiklifilter)

• Fuel Mixture Formation: Common Rail (CR)
• Supplementary Article/Info 2: High Pressure Side
• Manufacturer: BOSCH

• Fabrication Number: EPP-BM-038
• Voltage [V]: 12
• Housing Type: without housing
• Number of pins: 4
• Recommended additional repairs: Air Filter
• Connector Shape: oval
• Manufacturer: NTY

• Name: Tahkete osakeste sensor
• Manufacturer: BOS

• Recommended additional repairs: Air Filter
• Manufacturer: BOSCH

• Construction Year from: 04.2019
• Oxygen Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Manufacturer: BOSCH OSPRZET SILNIK BENZYNOWY

• Voltage [V]: 12
• Fitting Position: after SCR catalytic converter
• Cable Length [mm]: 1,010
• Number of pins: 5
• Guarantee: 3 years guarantee
• Weight [kg]: 0.28
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Fitting Position: before soot particulate filter
• Engine Code: B57 D30 A
• Cable Length [mm]: 1,055
• Number of pins: 5
• Thread Size: M20*1.5
• Connector Shape: oval
• Name: DE ANS1044-12B1
• Manufacturer: DELPHI

• Fitting Position: before catalytic converter
• Name: NOx-sensor, karbamiidipritse
• Manufacturer: BOS

• Fitting Position: after catalytic converter
• Name: NOx-sensor, NOx-katalsaator
• Manufacturer: BOS

• Fitting Position: before SCR catalytic converter
• not for emission standard: Euro 3, Euro 5
• not for special equipment code: S169A, S161A
• Length [mm]: 1,040
• Number of connectors: 5
• Manufacturer: METZGER

• Required quantity: 1
• Sensor Type: Hall Sensor
• Mounting Type: Screw Connection
• Shape: oval
• Number of pins: 3
• Fitting Depth [mm]: 28
• Supplementary Article/Info 2: with seal ring