• Braking System: for vehicles with a standard brake system
• Fitting Position: Rear Axle
• Brake Disc Type: internally vented
• Outer Diameter [mm]: 300
• Brake Disc Thickness [mm]: 20
• Number of Holes: 5
• Surface: Coated

• Braking System: for vehicles without M-sport brakes
• Brake Disc Thickness [mm]: 20
• Rim Hole Number: 5
• Number of mounting bores: 1
• Thickness [mm]: 64
• Outer Diameter [mm]: 300
• Bolt Hole Circle Ø [mm]: 112
• Machining: High-carbon
• Surface: Coated
• Brake Disc Type: Vented
• Fitting Position: Rear Axle
• Minimum thickness [mm]: 18.4
• Centering Diameter [mm]: 67
• Weight [kg]: 6
• Name: SW 33 10 6313
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Suspension: for vehicles without M technology
• Brake Disc Type: internally vented
• Outer Diameter [mm]: 307
• Brake Disc Thickness [mm]: 24
• Height [mm]: 66.2
• Minimum thickness [mm]: 22.4
• Surface: Coated
• Inner Diameter [mm]: 151
• Bolt Hole Circle Ø [mm]: 112
• Centering Diameter [mm]: 67
• Hole Arrangement/Number: 05/06
• Wheel Bolt Bore Ø [mm]: 16.7
• Packaging length [cm]: 32.8
• Packaging width [cm]: 32.8
• Packaging height [cm]: 15.5
• Weight [kg]: 8.5
• Manufacturer: MINTEX

Supplementary Article/Info 2: without wheel hub, without wheel bearing, without wheel studs

• Fitting Position: Rear Axle
• Braking System: for vehicles with a standard brake system
• Brake Disc Type: internally vented
• Brake Disc Thickness [mm]: 20
• Number of Holes: 5
• Supplementary Article/Info 2: with bolts/screws
• Height [mm]: 64
• Centering Diameter [mm]: 67
• Outer Diameter [mm]: 300
• Machining: High-carbon
• Surface: Coated
• Minimum thickness [mm]: 18.4
• Manufacturer: BREMBO

Brief Information: PVT vented disc. The PVT disc uses, in its ventilation chamber, pillars instead of vanes. Disc cooling capacity is enhanced by an extra 40% and therefore provides more resistance against thermal cracking.

• Braking System: for vehicles with M-sport brakes
• Brake Disc Thickness [mm]: 24
• Rim Hole Number: 5
• Number of mounting bores: 1
• Thickness [mm]: 64.2
• Outer Diameter [mm]: 345
• Bolt Hole Circle Ø [mm]: 112
• Machining: High-carbon
• Surface: Coated
• Brake Disc Type: internally vented
• Fitting Position: Rear Axle
• Minimum thickness [mm]: 22.4
• Centering Diameter [mm]: 67
• Weight [kg]: 10

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Braking System: for vehicles without Performance brakes
• Vehicle Equipment: for vehicles without sports package
• Outer Diameter [mm]: 307
• Brake Disc Thickness [mm]: 24
• Minimum thickness [mm]: 22
• Height [mm]: 66.4
• Bolt Hole Circle Ø [mm]: 112
• Brake Disc Type: Vented
• Centering Diameter [mm]: 67
• Number of Holes: 5
• Surface: Coated
• Machining: High-carbon
• Supplementary Article/Info 2: with bolts/screws
• Fulfils ECE norm: ECE-R90
• Drill Diameter, up to [mm]: 16.5
• Manufacturer: BOSCH

• Fitting Position: Front Axle
• Braking System: for vehicles with a standard brake system
• Brake Disc Type: internally vented, Perforated
• Machining: High-carbon
• Surface: Coated
• Outer Diameter [mm]: 307
• Brake Disc Thickness [mm]: 24
• Height [mm]: 66
• Rim Hole Number: 5
• Bolt Hole Circle Ø [mm]: 112
• Centering Diameter [mm]: 67
• Test Mark: ECE R90 APPROVED
• Minimum thickness [mm]: 22.4
• Weight [kg]: 8.1
• Hole Arrangement/Number: 6/5
• Manufacturer: ZIMMERMANN

• Braking System: for vehicles with M-sport brakes
• paired article number: 33 10 6577
• Brake Disc Thickness [mm]: 36
• Rim Hole Number: 5
• Number of mounting bores: 1
• Thickness [mm]: 66.2
• Outer Diameter [mm]: 348
• Bolt Hole Circle Ø [mm]: 112
• Machining: High-carbon
• Surface: Coated
• Brake Disc Type: internally vented
• Fitting Position: Front Axle Left
• Minimum thickness [mm]: 34.4
• Centering Diameter [mm]: 67
• Weight [kg]: 13.6
• Technical Information: Attention, this is a sided brake disc.
• Name: SW 33 10 6587
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle Right
• Construction Year to: 07.2022
• Braking System: for vehicles with M-performance brakes
• Brake Disc Type: internally vented, Drilled dimples, slotted
• Machining: High-carbon
• Surface: Coated
• Outer Diameter [mm]: 345
• Brake Disc Thickness [mm]: 24
• Height [mm]: 64
• Rim Hole Number: 5
• Bolt Hole Circle Ø [mm]: 112
• Centering Diameter [mm]: 67
• paired article number: 150.2982.20
• Test Mark: ECE R90 APPROVED
• Minimum thickness [mm]: 22.4
• Weight [kg]: 9.2
• Hole Arrangement/Number: 6/5
• Manufacturer: ZIMMERMANN

• Fitting Position: Rear Axle Left
• Construction Year to: 07.2022
• Braking System: for vehicles with M-performance brakes
• Brake Disc Type: internally vented, Drilled dimples, slotted
• Machining: High-carbon
• Surface: Coated
• Outer Diameter [mm]: 345
• Brake Disc Thickness [mm]: 24
• Height [mm]: 64
• Rim Hole Number: 5
• Bolt Hole Circle Ø [mm]: 112
• Centering Diameter [mm]: 67
• paired article number: 150.2983.20
• Test Mark: ECE R90 APPROVED
• Minimum thickness [mm]: 22.4
• Weight [kg]: 9.2
• Hole Arrangement/Number: 6/5
• Manufacturer: ZIMMERMANN

• Fitting Position: Front Axle
• Braking System: for vehicles with a standard brake system
• Brake Disc Type: internally vented, slotted
• Machining: High-carbon
• Surface: Coated
• Outer Diameter [mm]: 307
• Brake Disc Thickness [mm]: 24
• Height [mm]: 66
• Rim Hole Number: 5
• Bolt Hole Circle Ø [mm]: 112
• Centering Diameter [mm]: 67
• directional:
• Test Mark: ECE R90 APPROVED
• Minimum thickness [mm]: 22.4
• Weight [kg]: 8.1
• Hole Arrangement/Number: 6/5
• Manufacturer: ZIMMERMANN

• Fitting Position: Front Axle Left
• Braking System: for vehicles with M-sport brakes
• Brake Disc Type: internally vented
• Machining: High-carbon
• Surface: Coated
• Outer Diameter [mm]: 348
• Brake Disc Thickness [mm]: 36
• Height [mm]: 66
• Rim Hole Number: 5
• Bolt Hole Circle Ø [mm]: 112
• Centering Diameter [mm]: 67
• paired article number: 150.2937.20
• Test Mark: ECE R90 APPROVED
• Minimum thickness [mm]: 34.4
• Weight [kg]: 12.9
• Hole Arrangement/Number: 6/5
• Manufacturer: ZIMMERMANN
• Additional information: 150-2936-20
• Lisainfo: 150-2936-20

• Fitting Position: Rear Axle Left
• Construction Year to: 07.2022
• Braking System: for vehicles with M-performance brakes
• Brake Disc Type: internally vented, Perforated
• Machining: High-carbon
• Surface: Coated
• Outer Diameter [mm]: 345
• Brake Disc Thickness [mm]: 24
• Height [mm]: 64
• Rim Hole Number: 5
• Bolt Hole Circle Ø [mm]: 112
• Centering Diameter [mm]: 67
• paired article number: 150.2983.52
• Test Mark: ECE R90 APPROVED
• Minimum thickness [mm]: 22.4
• Weight [kg]: 9
• Hole Arrangement/Number: 6/5
• Manufacturer: ZIMMERMANN

• Fitting Position: Rear Axle Right
• Construction Year to: 07.2022
• Braking System: for vehicles with M-performance brakes
• Brake Disc Type: internally vented, Perforated
• Machining: High-carbon
• Surface: Coated
• Outer Diameter [mm]: 345
• Brake Disc Thickness [mm]: 24
• Height [mm]: 64
• Rim Hole Number: 5
• Bolt Hole Circle Ø [mm]: 112
• Centering Diameter [mm]: 67
• paired article number: 150.2982.52
• Test Mark: ECE R90 APPROVED
• Minimum thickness [mm]: 22.4
• Weight [kg]: 9
• Hole Arrangement/Number: 6/5
• Manufacturer: ZIMMERMANN

• Fitting Position: Front Axle Right
• Braking System: for vehicles with M-performance brakes
• Brake Disc Type: internally vented, Drilled dimples, slotted
• Machining: High-carbon
• Surface: Coated
• Outer Diameter [mm]: 374
• Brake Disc Thickness [mm]: 36
• Height [mm]: 66
• Rim Hole Number: 5
• Bolt Hole Circle Ø [mm]: 112
• Centering Diameter [mm]: 67
• paired article number: 150.2980.20
• Test Mark: ECE R90 APPROVED
• Minimum thickness [mm]: 34.4
• Weight [kg]: 15.3
• Hole Arrangement/Number: 6/5
• Manufacturer: ZIMMERMANN

• Fitting Position: Rear Axle
• Trim Level: Sport
• Outer Diameter [mm]: 345
• Brake Disc Thickness [mm]: 24
• Minimum thickness [mm]: 22.4
• Height [mm]: 64.2
• Bolt Hole Circle Ø [mm]: 112
• Brake Disc Type: two-part brake disc, Vented
• Centering Diameter [mm]: 67
• Number of Holes: 5
• Surface: Coated
• Machining: High-carbon
• Supplementary Article/Info 2: with bolts/screws
• Fulfils ECE norm: ECE-R90
• Drill Diameter, up to [mm]: 16.5
• Observe service information:
• Manufacturer: BOSCH
• Lisainfo: 0986479F61 BOSCH
• Additional information: 0986479F61 BOSCH

Braking System: for vehicles without Performance brakes, for vehicles with reinforced brakes

• Braking System: for vehicles with M-sport brakes
• Fitting Position: Rear Axle
• Outer Diameter [mm]: 345
• Brake Disc Thickness [mm]: 24
• Minimum thickness [mm]: 22.4
• Brake Disc Type: two-part brake disc, Vented
• Machining: High-carbon
• Surface: Coated
• Number of Holes: 5
• Supplementary Article/Info 2: with bolts/screws
• MAPP code available:
• Bolt Hole Circle Ø [mm]: 112
• Height [mm]: 64.2
• Centering Diameter [mm]: 67
• Inner Diameter [mm]: 171.8
• Bore Ø [mm]: 16.5
• Test Mark: E1 90R-02C0391/1028
• Manufacturer: ATE

• Fitting Position: Front Axle Right
• Braking System: for vehicles with M-performance brakes
• Brake Disc Type: internally vented, Perforated
• Machining: High-carbon
• Surface: Coated
• Outer Diameter [mm]: 374
• Brake Disc Thickness [mm]: 36
• Height [mm]: 66
• Rim Hole Number: 5
• Bolt Hole Circle Ø [mm]: 112
• Centering Diameter [mm]: 67
• paired article number: 150.2980.52
• Test Mark: ECE R90 APPROVED
• Minimum thickness [mm]: 34.4
• Weight [kg]: 15.2
• Hole Arrangement/Number: 6/5
• Manufacturer: ZIMMERMANN

• Fitting Position: Rear Axle
• Braking System: for vehicles with M-sport brakes
• Brake Disc Type: two-part brake disc, internally vented
• Brake Disc Thickness [mm]: 24
• Number of Holes: 5
• Supplementary Article/Info 2: with bolts/screws
• Height [mm]: 64
• Centering Diameter [mm]: 67
• Outer Diameter [mm]: 345
• Machining: High-carbon
• Surface: Coated
• Minimum thickness [mm]: 22.4
• Manufacturer: BREMBO
• Name: BR 09.D096.13

• Fitting Position: Front Axle Right
• Braking System: for vehicles with M-sport brakes
• Brake Disc Type: internally vented, two-part brake disc
• Quality: Alu-Topf genietet, Alu hub riveted
• Machining: High-carbon
• Surface: Coated
• Outer Diameter [mm]: 348
• Brake Disc Thickness [mm]: 36
• Height [mm]: 66
• Rim Hole Number: 5
• Bolt Hole Circle Ø [mm]: 112
• Centering Diameter [mm]: 67
• paired article number: 150.2937.32
• Test Mark: ECE R90 APPROVED
• Minimum thickness [mm]: 34.4
• Weight [kg]: 12.2
• Hole Arrangement/Number: 6/5
• Manufacturer: ZIMMERMANN

• Fitting Position: Front Axle Right
• Braking System: for vehicles with M-sport brakes
• Brake Disc Type: internally vented, two-part brake disc
• Quality: Alu-Topf genietet, Alu hub riveted
• Machining: High-carbon
• Surface: Coated
• Outer Diameter [mm]: 348
• Brake Disc Thickness [mm]: 36
• Height [mm]: 66
• Rim Hole Number: 5
• Bolt Hole Circle Ø [mm]: 112
• Centering Diameter [mm]: 67
• paired article number: 150.2936.32
• Test Mark: ECE R90 APPROVED
• Minimum thickness [mm]: 34.4
• Weight [kg]: 12.2
• Hole Arrangement/Number: 6/5
• Manufacturer: ZIMMERMANN

• Braking System: for vehicles with M-sport brakes
• Fitting Position: Front Axle Right
• Outer Diameter [mm]: 348
• Brake Disc Thickness [mm]: 36
• Minimum thickness [mm]: 34.4
• Brake Disc Type: two-part brake disc, Vented
• Machining: High-carbon
• Surface: Coated
• Number of Holes: 5
• paired article number: 24.0136-0133.2
• Bolt Hole Circle Ø [mm]: 112
• Height [mm]: 66.1
• Centering Diameter [mm]: 67
• Inner Diameter [mm]: 153.7
• Bore Ø [mm]: 16.5
• Supplementary Article/Info 2: with bolts/screws
• MAPP code available:
• Test Mark: E1 90R-02C0391/0990
• Manufacturer: ATE

• Construction Year to: 05.2023
• Fitting Position: Front Axle Right
• Trim Level: Sport
• Outer Diameter [mm]: 348
• Brake Disc Thickness [mm]: 36
• Minimum thickness [mm]: 34.4
• Height [mm]: 66.1
• Bolt Hole Circle Ø [mm]: 112
• Brake Disc Type: two-part brake disc, Vented
• Centering Diameter [mm]: 67
• Number of Holes: 5
• Surface: Coated
• Machining: High-carbon
• Supplementary Article/Info 2: with bolts/screws
• Fulfils ECE norm: ECE-R90
• Drill Diameter, up to [mm]: 16.5
• paired article number: 0986479F58
• Observe service information:
• Manufacturer: BOSCH

Braking System: for vehicles without Performance brakes, for vehicles with reinforced brakes

• Construction Year to: 05.2023
• Fitting Position: Front Axle Left
• Trim Level: Sport
• Outer Diameter [mm]: 348
• Brake Disc Thickness [mm]: 36
• Minimum thickness [mm]: 34.4
• Height [mm]: 66.1
• Bolt Hole Circle Ø [mm]: 112
• Brake Disc Type: two-part brake disc, Vented
• Centering Diameter [mm]: 67
• Surface: Coated
• Machining: High-carbon
• Supplementary Article/Info 2: with bolts/screws
• Fulfils ECE norm: ECE-R90
• Drill Diameter, up to [mm]: 16.5
• paired article number: 0986479F59
• Observe service information:
• Manufacturer: BOSCH

Braking System: for vehicles without Performance brakes, for vehicles with reinforced brakes

• Fitting Position: Rear Axle
• Braking System: for vehicles with M-sport brakes
• Equipment Code: 02NH, 03M2
• Construction Year to: 03.2022
• Brake Disc Type: Vented, two-part brake disc
• Number of Holes: 5
• Outer Diameter [mm]: 345
• Centering Diameter [mm]: 67
• Height [mm]: 64.2
• Brake Disc Thickness [mm]: 24
• Minimum thickness [mm]: 22.4
• Bolt Hole Circle Ø [mm]: 112
• Thread Size: 16.5
• Colour: black
• Surface: Painted
• Machining: High-carbon
• Test Mark: E1 90R-02 C0768/0646
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle Right
• Braking System: for vehicles with M-sport brakes
• Equipment Code: 02NH, 03M2
• Brake Disc Type: Vented, two-part brake disc
• Number of Holes: 5
• Outer Diameter [mm]: 348
• Centering Diameter [mm]: 67
• Height [mm]: 66.1
• Brake Disc Thickness [mm]: 36
• Minimum thickness [mm]: 34.4
• Bolt Hole Circle Ø [mm]: 112
• Thread Size: 16.5
• Machining: High-carbon
• paired article number: DF6890S
• Test Mark: E1 90R-02 C0768/0645
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle Left, Front Axle
• Braking System: for vehicles with M-sport brakes
• Brake Disc Type: internally vented, two-part brake disc
• Brake Disc Thickness [mm]: 36
• Number of Holes: 5
• Supplementary Article/Info 2: with bolts/screws
• Height [mm]: 66
• Centering Diameter [mm]: 67
• Outer Diameter [mm]: 348
• Machining: High-carbon
• Surface: Coated
• paired article number: 09.D095.13
• Minimum thickness [mm]: 34.4
• Manufacturer: BREMBO
• Name: BR 09.D094.13