• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Length [mm]: 725

• Fitting Position: Rear Axle
• Brake System: Teves
• Height 1 [mm]: 47.8
• Height 2 [mm]: 46.2
• Width [mm]: 123
• Thickness [mm]: 16.2
• Wear Warning Contact: prepared for wear indicator
• Lisainfo: Brake Pad Set, disc brake
• Additional information: Brake Pad Set, disc brake

• Fitting Position: Front Axle
• Brake System: Lucas
• Height 1 [mm]: 64.2
• Height 2 [mm]: 70.6
• Width [mm]: 129
• Thickness [mm]: 18.3
• Wear Warning Contact: prepared for wear indicator
• Manufacturer: JP GROUP
• Lisainfo: Brake Pad Set, disc brake
• Additional information: Brake Pad Set, disc brake

• Fitting Position: Rear Axle
• Brake Type: Disc Brake
• Length [mm]: 642

• Fitting Position: Rear Axle Left, Rear Axle Right
• Brake Type: Disc Brake
• Length [mm]: 641
• Fabrication Number: HCZ-BM-038
• Manufacturer: NTY
• Name: NTY HCZ-BM-038

• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Length 1 [mm]: 474
• Length 2 [mm]: 249
• Fabrication Number: HCZ-BM-040
• Manufacturer: NTY
• Name: NTY HCZ-BM-040

• Fitting Position: Rear Axle
• Brake Type: Disc Brake
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Fitting Position: Front Axle Left, Front Axle
• Brake Type: Disc Brake
• Length [mm]: 475
• Name: Hoiatuskontakt, piduriklotsi kulumine
• Manufacturer: MAX

• Brake System: ATE
• Fitting Position: Rear Axle
• Brake Type: Disc Brake
• Length [mm]: 645
• Name: Hoiatuskontakt, piduriklotsi kulumine
• Manufacturer: MAX

• Required quantity: 1
• Fitting Position: Rear Axle
• Brake Type: Disc Brake
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year from: 09.2014
• Construction Year to: 07.2019
• Fitting Position: Front Axle
• Length [mm]: 475
• Brake Type: Disc Brake
• Manufacturer: BOSCH
• Name: BS 1987473548

• Construction Year from: 09.2014
• Fitting Position: Rear Axle
• Length [mm]: 642
• Brake Type: Disc Brake
• Name: HOIATUSKONTAKT, PIDURIKLOTSI KULUMINE
• Manufacturer: BOS

• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Brake System: TRW
• Length [mm]: 475
• Length 2 [mm]: 250
• Supplementary Article/Supplementary Info: Axle Kit
• Name: Hoiatuskontakt, piduriklotsi kulumine
• Manufacturer: QBK

• Fitting Position: Rear Axle
• Brake Type: Disc Brake
• Brake System: ATE
• Length [mm]: 645
• Supplementary Article/Supplementary Info: Axle Kit
• Manufacturer: QUICK BRAKE
• Name: QB WS0360A

• Fitting Position: Rear Axle
• Brake System: ATE
• Length 1 [mm]: 645
• Brake Type: Disc Brake
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE LZ0274

• Fitting Position: Front Axle
• Brake System: TRW
• Length 1 [mm]: 474
• Brake Type: Disc Brake
• Name: DE LZ0276
• Manufacturer: DELPHI

• Length [mm]: 645
• Number of connectors: 2
• Fitting Position: Rear Axle Left, Rear Axle Right
• Brake Type: Disc Brake
• Weight [kg]: 0.03
• Name: SW 20 10 2262
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Brake Type: Disc Brake
• Length [mm]: 642
• Packaging length [cm]: 18.5
• Packaging width [cm]: 12.5
• Packaging height [cm]: 1
• Weight [kg]: 0.031
• Name: HOIATUSKONTAKT, PIDURIKLOTSI KULUMINE
• Manufacturer: TEX

• Fitting Position: Front Axle Left
• Brake Type: Disc Brake
• Length 1 [mm]: 253
• Length 2 [mm]: 475
• Packaging length [cm]: 18.5
• Packaging width [cm]: 12.5
• Packaging height [cm]: 1
• Weight [kg]: 0.033
• Name: HOIATUSKONTAKT, PIDURIKLOTSI KULUMINE
• Manufacturer: TEX

• Fitting Position: Front Axle Left
• Required quantity: 1
• Brake Type: Disc Brake
• Length 1 [mm]: 474
• Length 2 [mm]: 249
• Name: Hoiatuskontakt, piduriklotsi kulumine
• Manufacturer: ATE

• Fitting Position: Front Axle Left
• Required quantity: 1
• Brake Type: Disc Brake
• Length [mm]: 711
• Length 1 [mm]: 474
• Length 2 [mm]: 237
• Name: Hoiatuskontakt, piduriklotsi kulumine
• Manufacturer: ATE

• Required quantity: 1
• Fitting Position: Rear Axle
• Brake Type: Disc Brake
• Length [mm]: 641
• Name: Hoiatuskontakt, piduriklotsi kulumine
• Manufacturer: ATE

• Article number of recommended accessories: 98052100
• Fitting Position: Rear Axle
• Height 1 [mm]: 47.8
• Height 2 [mm]: 46.2
• Thickness [mm]: 16.2
• Wear Warning Contact: prepared for wear indicator
• Brake System: Teves
• Width [mm]: 123
• Name: Piduriklotsi komplekt,ketaspidur
• Manufacturer: MAX

• Fitting Position: Rear Axle
• Width [mm]: 123
• Height 1 [mm]: 47.8
• Height 2 [mm]: 46.2
• Thickness [mm]: 16.2
• Wear Warning Contact: prepared for wear indicator
• Brake System: Teves
• Name: Piduriklotsi komplekt,ketaspidur
• Manufacturer: QUARO

• Length [mm]: 123
• Width [mm]: 47
• Test Mark: ECE R90 Approved
• Fitting Position: Rear Axle
• Thickness 1 [mm]: 16
• Wear Warning Contact: prepared for wear indicator
• Weight [kg]: 0.85
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: BLP

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Height 1 [mm]: 64.2
• Height 2 [mm]: 70.6
• Thickness [mm]: 18.3
• Wear Warning Contact: prepared for wear indicator
• Supplementary Article/Info 2: with brake caliper screws
• Brake System: Lucas
• Width [mm]: 129
• Name: Piduriklotsi komplekt,ketaspidur
• Manufacturer: MAX

• Fitting Position: Rear Axle
• for brake disc diameter [mm]: 280
• FMSI Code: D1762-8993
• Test Mark: E9 90R-02A0825/3972
• WVA Number: 25331 25332
• Brake System: Continental
• Supplementary Article/Info 2: with anti-squeak plate
• Supplementary Article/Supplementary Info: without accessories
• Friction Lining Material: Low-Metallic
• Wear Warning Contact: prepared for wear indicator
• Width 1 [mm]: 123.2
• Width 2 [mm]: 123.2
• Height 1 [mm]: 47.6
• Height 2 [mm]: 46.3
• Thickness 1 [mm]: 15.9
• Thickness 2 [mm]: 15.9
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE LP2719

• Fitting Position: Rear Axle
• Width [mm]: 123
• Height 1 [mm]: 47.8
• Height 2 [mm]: 46.4
• Thickness [mm]: 16.2
• Wear Warning Contact: prepared for wear indicator
• Brake System: ATE
• Supplementary Article/Info 2: with anti-squeak plate
• Name: Piduriklotsi komplekt,ketaspidur
• Manufacturer: MEY

• Fitting Position: Rear Axle
• Width [mm]: 123
• Height 1 [mm]: 47.8
• Height 2 [mm]: 46.2
• Thickness [mm]: 16.2
• Wear Warning Contact: prepared for wear indicator
• Brake System: Teves
• Friction Lining Material: Ceramic
• Name: Piduriklotsi komplekt,ketaspidur
• Manufacturer: QUARO

• Fitting Position: Rear Axle
• Number of pads: 4
• Thickness [mm]: 16
• Length [mm]: 123
• Height 1 [mm]: 46.7
• Height 2 [mm]: 47.8
• Wear Warning Contact: prepared for wear indicator
• Brake Pad: With bevelled edges
• Brake System: Teves
• WVA Number: 25331, 25332
• Name: SK VKBP90078
• Manufacturer: SKF

• Fitting Position: Rear Axle
• Width [mm]: 123
• Height 1 [mm]: 46.7
• Height 2 [mm]: 47.8
• Thickness [mm]: 16
• Wear Warning Contact: prepared for wear indicator
• Brake System: ATE
• Fulfils ECE norm: R90
• Supplementary Article/Info 2: with anti-squeak plate
• Article number of recommended accessories: 109-0032
• Manufacturer: METZGER

Installation Information: For vehicles older than 48 months it is additionally recommended to replace the retaining springs.

• Fitting Position: Rear Axle
• Manufacturer Restriction: ATE
• Width [mm]: 123
• Height [mm]: 46.6
• Thickness [mm]: 16
• Wear Warning Contact: prepared for wear indicator
• Test Mark: E9 90R-02A0120/3972
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: TRW
• Lisainfo: GDB2063
• Additional information: GDB2063

SVHC: No information available, please contact the manufacturer!

• Engine Code: B47 C20 A
• Construction Year from: 09.2014
• Fitting Position: Rear Axle
• Supplementary Article/Info 2: with anti-squeak plate
• Material: Low-Metallic
• Test Mark: ECE-R90
• WVA Number: 25331
• Thickness [mm]: 15.9
• Width [mm]: 123.2
• Height 1 [mm]: 46.3
• Height 2 [mm]: 47.6
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: BOS

• Fitting Position: Front Axle
• for brake disc diameter [mm]: 294
• FMSI Code: D1801-9033
• Test Mark: E9 90R-02A0823/4180
• WVA Number: 25207 25208
• Brake System: TRW
• Supplementary Article/Info 2: with anti-squeak plate
• Supplementary Article/Supplementary Info: with accessories
• Friction Lining Material: Low-Metallic
• Wear Warning Contact: prepared for wear indicator
• Width 1 [mm]: 129
• Width 2 [mm]: 129
• Height 1 [mm]: 70.6
• Height 2 [mm]: 63.8
• Thickness 1 [mm]: 18.2
• Thickness 2 [mm]: 18.2
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE LP2717

• Fitting Position: Rear Axle
• Article number of recommended accessories: MWI0566
• Width [mm]: 123.2
• Height 1 [mm]: 47.8
• Height 2 [mm]: 46.2
• Thickness [mm]: 16.2
• Wear Warning Contact: prepared for wear indicator
• WVA Number: 25331
• Brake System: Teves
• Observe mounting information:
• Packaging length [cm]: 12.5
• Packaging width [cm]: 8.1
• Packaging height [cm]: 8
• Weight [kg]: 0.9
• Manufacturer: MINTEX

• Fitting Position: Rear Axle
• Thickness [mm]: 16.1
• Test Mark: R90 Homologated
• Width [mm]: 123
• Height [mm]: 47.8
• Weight [kg]: 0.92
• Height 1 [mm]: 47.8
• Wear Warning Contact: prepared for wear indicator
• Supplementary Article/Supplementary Info: without accessories
• Brake System: ATE
• Packing Type: Box
• WVA Number: 25331, 25332
• Number of springs: 1
• Packaging length [cm]: 15
• Packaging width [cm]: 10.5
• Packaging height [cm]: 4.3
• Manufacturer: JURID

• Fitting Position: Front Axle
• Number of pads: 4
• Thickness [mm]: 18.4
• Length [mm]: 129.1
• Height 1 [mm]: 63.8
• Height 2 [mm]: 70.6
• Wear Warning Contact: prepared for wear indicator
• Brake Pad: With bevelled edges
• Brake System: TRW
• WVA Number: 22187, 22188
• Name: SK VKBP80153
• Manufacturer: SKF

• Engine Code: B47 C20 B
• Construction Year from: 03.2018
• Fitting Position: Front Axle
• Material: Low-Metallic
• Test Mark: ECE-R90
• WVA Number: 25617
• Number of bolts/screws: 4
• Thickness [mm]: 18.35
• Width [mm]: 128.5
• Height 1 [mm]: 70.8
• Height 2 [mm]: 76.1
• Name: Piduriklotsi komplekt,ketaspidur
• Manufacturer: BOS

• Fitting Position: Front Axle
• Manufacturer Restriction: TRW
• Width [mm]: 129
• Height 1 [mm]: 64.5
• Height 2 [mm]: 71.5
• Thickness [mm]: 18.4
• Wear Warning Contact: prepared for wear indicator
• Supplementary Article/Supplementary Info: with accessories
• Supplementary Article/Info 2: with brake caliper screws
• Test Mark: E9 90R-02A0107/4180
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: TRW
• Quality class: Q

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Width [mm]: 128.9
• Height 1 [mm]: 64.2
• Height 2 [mm]: 70.6
• Thickness [mm]: 18.3
• Wear Warning Contact: prepared for wear indicator
• Supplementary Article/Info 2: with brake caliper screws
• WVA Number: 22187
• Brake System: Lucas
• Packaging length [cm]: 15.2
• Packaging width [cm]: 8.8
• Packaging height [cm]: 8.4
• Weight [kg]: 1.66
• Manufacturer: MINTEX

• Engine Code: B47 C20 A
• Construction Year from: 09.2014
• Fitting Position: Front Axle
• Wear Warning Contact: excl. wear warning contact
• Material: Low-Metallic
• Test Mark: ECE-R90
• WVA Number: 25207
• Number of bolts/screws: 4
• Thickness [mm]: 18.2
• Width [mm]: 129
• Height 1 [mm]: 64
• Height 2 [mm]: 70.6
• Name: Piduriklotsi komplekt,ketaspidur
• Manufacturer: BOS

• Fitting Position: Rear Axle
• Width [mm]: 123
• Thickness [mm]: 16
• Height 1 [mm]: 46
• Height 2 [mm]: 48
• Wear Warning Contact: prepared for wear indicator
• Supplementary Article/Supplementary Info: without accessories
• Brake System: Teves
• WVA Number: 25331, 25332
• Name: BR P 06 094
• Manufacturer: BREMBO

• Fitting Position: Rear Axle
• Article number of recommended accessories: 8DK 355 252-621
• Width [mm]: 123.2
• Height 1 [mm]: 47.8
• Height 2 [mm]: 46.2
• Thickness [mm]: 16.2
• Wear Warning Contact: prepared for wear indicator
• WVA Number: 25331
• Brake System: Teves
• Weight [kg]: 0.9
• Name: HE 8DB355021681
• Manufacturer: HELLA PAGID

• Fitting Position: Front Axle
• Width [mm]: 129
• Thickness [mm]: 18
• Height 1 [mm]: 64
• Height 2 [mm]: 71
• Wear Warning Contact: prepared for wear indicator
• Supplementary Article/Supplementary Info: without accessories
• Brake System: Lucas
• Supplementary Article/Info 2: with brake caliper screws
• WVA Number: 22187, 22188
• Manufacturer: BREMBO
• Name: BR P 06 092

• Fitting Position: Rear Axle
• Article number of recommended accessories: 98052100
• Width [mm]: 123.2
• Height 1 [mm]: 47.8
• Height 2 [mm]: 46.2
• Thickness [mm]: 16.2
• Wear Warning Contact: prepared for wear indicator
• WVA Number: 25331
• Brake System: Teves
• Packaging length [cm]: 12.5
• Packaging width [cm]: 8.1
• Packaging height [cm]: 8
• Weight [kg]: 0.9
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: TEX

• Fitting Position: Front Axle
• Thickness [mm]: 18.3
• Test Mark: R90 Homologated
• Width [mm]: 128.9
• Height [mm]: 70.6
• Weight [kg]: 1.803
• Height 1 [mm]: 70.6
• Wear Warning Contact: prepared for wear indicator
• Brake System: LUCAS
• Packing Type: Box
• WVA Number: 22187, 22188
• Packaging length [cm]: 15.5
• Packaging width [cm]: 8.7
• Packaging height [cm]: 8.7
• Manufacturer: JURID

• Vehicle Equipment: for vehicles with electric parking brake
• Fitting Position: Rear Axle
• Width 1 [mm]: 123
• Height 1 [mm]: 47.9
• Width 2 [mm]: 123
• Height 2 [mm]: 46.7
• Thickness [mm]: 16.2
• Brake System: ATE
• Test Mark: E1 90R-02A0169/0175
• Article number of recommended accessories: 24.8190-0986.2
• Observe dimensions:
• MAPP code available:
• Name: Piduriklotsi komplekt,ketaspidur
• Manufacturer: ATE

Wear Warning Contact: prepared for wear indicator, excl. wear warning contact

• Fitting Position: Front Axle
• Width [mm]: 128.9
• Height 1 [mm]: 64.2
• Height 2 [mm]: 70.6
• Thickness [mm]: 18.3
• Wear Warning Contact: prepared for wear indicator
• Supplementary Article/Info 2: with brake caliper screws
• WVA Number: 22187
• Brake System: Lucas
• Weight [kg]: 1.66
• Name: HE 8DB355023091
• Manufacturer: HELLA PAGID

• Fitting Position: Front Axle
• Width [mm]: 129.1
• Height 1 [mm]: 64.6
• Height 2 [mm]: 71.1
• Thickness [mm]: 18.4
• Wear Warning Contact: prepared for wear indicator
• Brake System: ATE
• Supplementary Article/Info 2: with brake caliper screws
• Manufacturer: METZGER

Installation Information: For vehicles older than 48 months it is additionally recommended to replace the retaining springs.

• Fitting Position: Front Axle
• Width [mm]: 128.9
• Height 1 [mm]: 64.2
• Height 2 [mm]: 70.6
• Thickness [mm]: 18.3
• Wear Warning Contact: prepared for wear indicator
• Supplementary Article/Info 2: with brake caliper screws
• WVA Number: 22187
• Brake System: Lucas
• Packaging length [cm]: 15.2
• Packaging width [cm]: 8.8
• Packaging height [cm]: 8.4
• Weight [kg]: 1.66
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: TEX

• Vehicle Equipment: for vehicles with electric parking brake
• Fitting Position: Rear Axle
• Width 1 [mm]: 123
• Height 1 [mm]: 47.9
• Width 2 [mm]: 123
• Height 2 [mm]: 46.7
• Thickness [mm]: 16.2
• Brake System: ATE
• Test Mark: E1 90R-02A0258/0176
• Article number of recommended accessories: 24.8190-0986.2
• Observe dimensions:
• MAPP code available:
• Name: Piduriklotsi komplekt,ketaspidur
• Manufacturer: ATE

Wear Warning Contact: prepared for wear indicator, excl. wear warning contact Technical Information: Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones.

• Fitting Position: Front Axle
• Width [mm]: 129
• Height 1 [mm]: 64.3
• Height 2 [mm]: 71.3
• Thickness [mm]: 18.6
• Supplementary Article/Info 2: with brake caliper screws
• Number of bolts/screws: 4
• Brake System: Lucas / TRW
• Test Mark: E1 90R-02A0334/0299
• MAPP code available:
• Name: Piduriklotsi komplekt,ketaspidur
• Manufacturer: ATE

Wear Warning Contact: prepared for wear indicator, excl. wear warning contact

• Fitting Position: Front Axle
• Width [mm]: 129
• Height 1 [mm]: 64.3
• Height 2 [mm]: 71.3
• Thickness [mm]: 18.6
• Supplementary Article/Info 2: with brake caliper screws
• Number of bolts/screws: 4
• Brake System: Lucas / TRW
• Test Mark: E1 90R-02A0479/0300
• MAPP code available:
• Manufacturer: ATE

Wear Warning Contact: prepared for wear indicator, excl. wear warning contact Technical Information: Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones.