Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Material: ACM
(Polyacrylate) - Inner Diameter [mm]: 9.7
- Outer Diameter [mm]: 22.5
- Height [mm]: 6
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Thickness [mm]: 6
- Inner Diameter [mm]: 9
- Outer Diameter [mm]: 22.5
-
Material: ACM
(Polyacrylate) - Weight [kg]: 0.005
-
Name: TIHEND,
KLAPIKAANEKRUVID - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Left Rear
-
Lisainfo: Breather hose for crankcase,
left, rear -
Additional information: Breather hose for crankcase,
left, rear
- Climate Zones: not for cold climate zones
- Supplementary Article/Info 2: with heat shield pipe
-
Material: Plastic,
ECO (Epichlorohydrin Rubber) - Hose Type: Breather Hose
- Fitting Position: Lower
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Material: Plastic
- Supplementary Article/Info 2: with protection hose
- Climate Zones: for cold climate zones
-
Fitting Position: from cylinder block to oil separator,
Lower - Manufacturer: TOPRAN HANS PRIES
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: Left Front
-
Lisainfo: Breather hose for crankcase,
left, front -
Additional information: Breather hose for crankcase,
left, front
- Climate Zones: for cold climate zones
- Fitting Position: Lower
- Weight [kg]: 0.1
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Climate Zones: not for cold climate zones
- Material: Plastic
- Fitting Position: Left Rear
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Climate Zones: for cold climate zones
- Material: Plastic
- Supplementary Article/Info 2: with protection hose
- Fitting Position: Left Rear
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Climate Zones: not for cold climate zones
- Material: Plastic
- Manufacturer: TOPRAN
Fitting Position: from cylinder head cover to oil separator, Left Front General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Engine Code: M54 B22
(226S1) - Manufacturer: BGA
-
Material: ACM
(Polyacrylate) - Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Climate Zones: not for cold climate zones,
for cold climate zones - Fitting Position: Left Rear
-
Weight [kg]: 0.03,
0.036 - Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Engine Code: M54 B22
(226S1) - Manufacturer: BGA
- Name: COU 440088P
- Manufacturer: CORTECO
-
Name: Tihend,
klapikaan - Manufacturer: DRM
Manufacturer: FA1 FISCHER
-
Engine Code: M54 B22
(226S1) -
Material: ACM
(Polyacrylate), Silicone -
Name: TIHENDIKOMPLEKT,
KLAPIKAAN - Manufacturer: REI
-
Additional information: 15-
33077- 02 -
Lisainfo: 15-
33077- 02
- Manufacturer: ELRING
- Lisainfo: 382.750 ELR
- Additional information: 382.750 ELR
- Components deviate from OE:
- Supplementary Article/Supplementary Info: with gaskets
- Manufacturer: ELRING
- Additional information: 318.600 ELRING
- Lisainfo: 318.600 ELRING
-
Material: ACM
(Polyacrylate) - Weight [kg]: 0.25
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Supplementary Article/Supplementary Info: with seal
-
Fabrication Number: BPZ-
BM- 008 -
Name: NTY BPZ-
BM- 008 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Length [mm]: 723
- Width [mm]: 326
- Height [mm]: 112
- Supplementary Article/Supplementary Info: with seal
- Name: Klapikaas
- Manufacturer: MAX
- Model Year from: 2002
-
Manufacturer: ABAKUS DEPO/
LORO
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.
-
Seal Material: ACM
(Polyacrylate) - Manufacturer: TOPRAN
Supplementary Article/Supplementary Info: with gaskets/seals, with valve cover gasket, with rubber mounts General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Manufacturer: DR.MOTOR
- Name: DRM 2902
- Cylinder Head Cover Material: Plastic
- Name: Klapikaas
- Manufacturer: DRM
- Weight [kg]: 3.2
- Warranty: 3 years warranty
- Manufacturer: SKV GERMANY
- Name: CE 48SKV014
- Length [mm]: 723
- Width [mm]: 326
- Height [mm]: 112
- Colour: black
- Material: Plastic
- Weight [kg]: 2.357
- Supplementary Article/Supplementary Info: with seal
- for OE number: 11 12 7 512 839
- Name: SW 33 10 0086
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Supplementary Article/Supplementary Info: with gaskets/
seals -
Supplementary Article/Info 2: without bolts/
screws - Article number of recommended accessories: 2141006
- Manufacturer: METZGER
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks