• Construction Year to: 12.2006
• Engine Code: N52B25UL
• for OE number: 15407117
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 425
• Number of pins: 4
• Weight [g]: 101
• Gross Weight [g]: 134
• Manufacturer: DENSO

Lambda Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
KLASA C KOMBI (S202)
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
KLASA C KOMBI (S202)
(kvaliteediklass: Q)"

• Number of circuits: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: KAMOKA

• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Lambda Sensor: Diagnostic Probe, Heated
• Fitting Position: for cylinder 4-6, after catalytic converter
• Required quantity: 1
• Number of pins: 4
• Cable Length [mm]: 340
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PA358221501
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Construction Year from: 03.2005
• Lambda Sensor: Diagnostic Probe, Finger probe
• Block Separation:
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Transmission Type: Manual Transmission
• Name: LAMBDA ANDUR
• Manufacturer: MAX

Vehicle Equipment: for vehicles with factory mounted tow bar, for vehicles without factory fitted towbar Fitting Position: for cylinder 1-3, for cylinder 4-6, after catalytic converter

• Lambda Sensor: Lambda Sensor
• Voltage [V]: 12
• Number of circuits: 4
• Weight [kg]: 0.09
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Warranty: 3 years warranty
• Name: CE 09SKV909
• Manufacturer: ESEN SKV

• Lambda Sensor: Lambda Sensor
• Cable Length [mm]: 290
• Alternatively:
• Number of circuits: 4
• Alternative Repair Kit: 570112
• Manufacturer: ERA

• Lambda Sensor: Diagnostic Probe, Planar probe, Heated
• Fitting Position: for cylinder 1-3, after catalytic converter
• Cable Length [mm]: 480
• Name: DE ES21190-12B1
• Manufacturer: DELPHI

• Lambda Sensor: Regulating Probe
• Length [mm]: 1,400
• Fabrication Number: ESL-BM-022
• Manufacturer: NTY

• Engine Code: N52 B25 A, N52 B25 B, N52 B25 BE
• for facelift:
• Vehicle Equipment: for vehicles without trailer hitch
• Line insulation design: with silicone-coated woven-fibre insulation
• Number of pins: 4
• for OE number: V99760001
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Length [mm]: 350
• Exhaust System: after catalytic converter
• Manufacturer: VEMO GERMANY

Lambda Sensor: Diagnostic Probe, Finger probe, Heated, Thread pre-greased Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front, Exhaust Manifold, after catalytic converter
• Engine Code: N52 B25 A
• Supplementary Article/Info 2: Catalytic Converter at exhaust manifold
• Line insulation design: with silicone-coated woven-fibre insulation
• Lambda Sensor: Planar probe, Heated, Thread pre-greased
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Manufacturer: VEMO GERMANY

Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Lambda Sensor: Diagnostic Probe, Planar probe, Heated
• Fitting Position: after catalytic converter
• Quantity: 1
• Cable Length [mm]: 614
• Manufacturer: DELPHI

• Construction Year from: 03.2005
• Lambda Sensor: Diagnostic Probe
• Block Separation:
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

Fitting Position: after catalytic converter, for cylinder 1-3, for cylinder 4-6 Vehicle Equipment: for vehicles with factory mounted tow bar, for vehicles without factory fitted towbar

• Construction Year to: 12.2006
• Engine Code: N52B25UL
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 93
• Gross Weight [g]: 140
• Manufacturer: DENSO
• Name: DN DOX-0150

Lambda Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"

• Lambda Sensor: Regulating Probe
• Length [mm]: 910
• Fabrication Number: ESL-BM-020
• Manufacturer: NTY

• Lambda Sensor: Heated
• Number of pins: 4
• Cable Length [mm]: 450
• for article number: 81633E
• Quality: OE EQUIVALENT
• Name: Lambda andur
• Manufacturer: MD

• Fitting Position: for cylinder 1-3, after catalytic converter
• Vehicle Equipment: for vehicles without trailer hitch
• Lambda Sensor: Planar probe
• Thread Size: M18 x 1,5
• Cable Length [mm]: 460
• Number of pins: 4
• Name: Lambda andur
• Manufacturer: MEY

• Construction Year from: 03.2005
• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter, for cylinder 4-6
• Vehicle Equipment: for vehicles without factory fitted towbar
• Number of circuits: 4
• Overall Length [mm]: 380
• Available as universal article as well, see article no.: 0258986602
• Recommended change interval [km]: 250,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Construction Year from: 03.2005
• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter, for cylinder 1-3
• Vehicle Equipment: for vehicles with factory mounted tow bar
• Number of circuits: 4
• Overall Length [mm]: 482
• Recommended change interval [km]: 250,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Lambda Sensor: Lambda Sensor
• Weight [kg]: 0.2
• Warranty: 3 years warranty
• Name: CE 09SKV405
• Manufacturer: ESEN SKV

• Lambda Sensor: Lambda Sensor
• Cable Length [mm]: 640
• Number of pins: 6
• Total Length [mm]: 780
• Manufacturer: ERA

• Construction Year to: 11.2005
• Lambda Sensor: Regulating Probe, Broadband lambda sensor, Heated
• Fitting Position: for cylinder 4-6, before catalytic converter
• Cable Length [mm]: 312
• Manufacturer: DELPHI
• Name: DE ES20555-12B1

• Fitting Position: for cylinder 4-6, after catalytic converter
• Vehicle Equipment: for vehicles with factory mounted tow bar
• Lambda Sensor: Planar probe
• Thread Size: M18 x 1,5
• Cable Length [mm]: 460
• Supplementary Article/Supplementary Info: with thermal protection
• Number of pins: 4
• Name: Lambda andur
• Manufacturer: MEY

• Lambda Sensor: Lambda Sensor
• Voltage [V]: 12
• Colour: red
• Number of circuits: 5
• Weight [kg]: 0.15
• Operating Mode: Electric
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 09SKV905

• Construction Year from: 03.2005
• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter, for cylinder 1-3
• Vehicle Equipment: for vehicles without factory fitted towbar
• Number of circuits: 4
• Overall Length [mm]: 430
• Available as universal article as well, see article no.: 0258986602
• Recommended change interval [km]: 250,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Construction Year to: 11.2005
• Fitting Position: for cylinder 1-3, before catalytic converter
• Lambda Sensor: Regulating Probe, Broadband lambda sensor, Heated
• Cable Length [mm]: 352
• Name: DE ES20554-12B1
• Manufacturer: DELPHI

• Construction Year from: 03.2005
• Construction Year to: 11.2005
• Fitting Position: before catalytic converter
• Lambda Sensor: Regulating Probe, Heated
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 5
• Cable Length [mm]: 406
• Weight [kg]: 0.097
• Name: SW 33 10 4087
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: N52 B25 A
• Construction Year to: 11.2005
• Fitting Position: for cylinder 4-6, before catalytic converter
• Required quantity: 1
• Length [mm]: 340
• Cable Length [mm]: 350
• Conductor Number: 5
• Number of circuits: 5
• Name: EP 1.998.464
• Manufacturer: EPS

Lambda Sensor: Regulating Probe, Heated, Planar probe, Broadband lambda sensor, Thread pre-greased

• Construction Year to: 11.2005
• Lambda Sensor: Regulating Probe, Broadband lambda sensor
• Fitting Position: for cylinder 1-3, before catalytic converter
• Required quantity: 1
• Cable Length [mm]: 400
• Number of pins: 6
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Manufacturer: HELLA
• Name: HE 6PA009166801

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Construction Year from: 03.2005
• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter, for cylinder 4-6
• Vehicle Equipment: for vehicles with factory mounted tow bar
• Number of circuits: 4
• Overall Length [mm]: 510
• Available as universal article as well, see article no.: 0258986602
• Recommended change interval [km]: 250,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Construction Year from: 03.2005
• Construction Year to: 11.2005
• Fitting Position: before catalytic converter
• Lambda Sensor: Regulating Probe, Heated
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 5
• Cable Length [mm]: 406
• Weight [kg]: 0.097
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Production date to: 31.10.2005
• Lambda Sensor: Broadband lambda sensor
• Thread Size: M18 x 1,5
• Cable Length [mm]: 400
• Number of pins: 6
• Name: Lambda andur
• Manufacturer: MEY

Fitting Position: before catalytic converter, for cylinder 1-3, for cylinder 4-6

• Engine Code: N52 B25 A
• Construction Year from: 12.2005
• Fitting Position: for cylinder 1-3, before catalytic converter
• Required quantity: 1
• Length [mm]: 1,400
• Cable Length [mm]: 1,500
• Conductor Number: 5
• Number of circuits: 5
• Name: EP 1.998.482
• Manufacturer: EPS

Lambda Sensor: Regulating Probe, Heated, Planar probe, Broadband lambda sensor, Thread pre-greased

• Lambda Sensor: Lambda Sensor
• Weight [kg]: 0.15
• Warranty: 3 years warranty
• Technical Information: Universal
• Name: CE 09SKV915
• Manufacturer: ESEN SKV

• Construction Year from: 03.2005
• Construction Year to: 11.2005
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter, for cylinder 4-6
• Number of circuits: 5
• Overall Length [mm]: 340
• Recommended change interval [km]: 250,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Construction Year to: 11.2005
• Fitting Position: for cylinder 4-6, before catalytic converter
• Lambda Sensor: Regulating Probe
• Length [mm]: 400
• Number of pins: 6
• Manufacturer: FAE

• Construction Year from: 12.2005
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter, for cylinder 1-3
• Number of circuits: 5
• Overall Length [mm]: 1,400
• Recommended change interval [km]: 250,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Construction Year from: 12.2005
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter, for cylinder 4-6
• Number of circuits: 5
• Overall Length [mm]: 910
• Recommended change interval [km]: 250,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Construction Year from: 03.2005
• Construction Year to: 11.2005
• Engine Code: N52B25UL
• Fitting Position: before catalytic converter
• Number of pins: 6
• Cable Length [mm]: 350
• Thread Size: M18x1,5
• Switch Pressure [bar]: 4
• Weight [kg]: 0.14
• Name: VA 368396
• Manufacturer: VALEO

Lambda Sensor: Planar probe, Broadband lambda sensor, Thread pre-greased, Heated

• Engine Code: N52 B25 A, N52 B25 B
• Construction Year from: 12.2005
• Lambda Sensor: Regulating Probe, Broadband lambda sensor
• Fitting Position: Exhaust Manifold
• Required quantity: 2
• Number of pins: 5
• Cable Length [mm]: 1,290
• for article number: 81668E
• Quality: OE EQUIVALENT
• Manufacturer: MEAT&DORIA

• Construction Year from: 03.2005
• Construction Year to: 11.2005
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter, for cylinder 1-3
• Number of circuits: 5
• Overall Length [mm]: 380
• Recommended change interval [km]: 250,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Construction Year from: 11.2005
• Construction Year to: 12.2006
• Engine Code: N52B25UL
• Fitting Position: before catalytic converter
• Number of pins: 6
• Cable Length [mm]: 950
• Thread Size: M18x1,5
• Switch Pressure [bar]: 4
• Weight [kg]: 0.18
• Manufacturer: VALEO
• Name: VA 368430

Lambda Sensor: Planar probe, Broadband lambda sensor, Thread pre-greased, Heated

• Engine Code: N52B25A, N52B25B
• Construction Year from: 12.2005
• Fitting Position: Exhaust Manifold
• Required quantity: 2
• Line insulation design: with silicone-coated woven-fibre insulation
• Cable Length [mm]: 1,405
• Thread Size: M18 x 1,5
• Conductor Number: 5
• Connector Shape: D Shape
• Length [mm]: 1,250
• Number of pins: 5
• Lambda Sensor: Regulating Probe, Thread pre-greased
• Number of circuits: 5
• Exhaust System: after catalytic converter
• Weight [kg]: 0.188
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: for cylinder 4-6, after catalytic converter
• Lambda Sensor: Diagnostic Probe
• Length [mm]: 400
• Number of pins: 4
• Technical Information Number: Universal 77015
• Manufacturer: FAE