• Fitting Position: Front Axle
• Quantity per axle: 2
• Name: KAITSEMšTS/KAITSEKUMM,AMORT
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Material: Plastic
• Fitting Position: Front Axle
• Inner Diameter [mm]: 70, 60
• Name: Kaitsemts/kaitsekumm,amort
• Manufacturer: MAX

• for OE number: 31331094749
• Fitting Position: Front Axle
• Height [mm]: 124
• Material: Thermoplast
• Weight [g]: 54
• Diameter 1 [mm]: 60
• Diameter 2 [mm]: 70
• Name: IM 35227
• Manufacturer: ORIGINAL IMPERIUM
• Lisainfo: NRF35227
• Additional information: NRF35227

• Width [mm]: 157
• Material: Rubber
• Fitting Position: Front Axle, Upper
• Weight [kg]: 0.039
• Name: Puhver, vedrustus
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Thickness [mm]: 125
• Inner Diameter [mm]: 60, 70
• Material: Plastic
• Fitting Position: Front Axle
• Weight [kg]: 0.05
• Manufacturer: FEB
• Additional information: FE34288
• Lisainfo: FE34288

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Kaitsekaan/kaitsekumm - Vedrustus/amordid BMW P. E46/E81 03-

• Fitting Position: Front Axle, Lower
• Material: Rubber
• Manufacturer: AUTO-GH
• Name: GH 621539

• Length [mm]: 144
• Width [mm]: 128
• Material: Rubber
• Fitting Position: Front Axle, Lower
• Weight [kg]: 0.062
• Name: Puhver, vedrustus
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle, Lower
• Material: Rubber
• Manufacturer: AUTO-GH

• Thickness [mm]: 125
• Inner Diameter [mm]: 60, 70
• Material: Plastic
• Fitting Position: Front Axle
• Weight [kg]: 0.05
• Name: SW 20 93 4288
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 144
• Width [mm]: 128
• Material: Rubber
• Fitting Position: Front Axle, Lower
• Weight [kg]: 0.062
• Name: SW 33 10 2150
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Suspension: for vehicles with standard suspension
• Quantity per packing unit: 2
• Fitting Position: Rear Axle Right, Rear Axle Left
• Height [mm]: 145
• Supplementary Article/Info 2: with protective cap/bellow
• Material: PU (Polyurethane)
• Replace in pairs only:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Suspension: for vehicles with standard suspension
• Fitting Position: Front Axle
• Height [mm]: 85
• Manufacturer: OPTIMAL ZAWIESZENIE

• Suspension: for vehicles with sports suspension
• Quantity per packing unit: 2
• Fitting Position: Rear Axle Left, Rear Axle Right
• Height [mm]: 113
• Supplementary Article/Info 2: with protective cap/bellow
• Material: PU (Polyurethane)
• Replace in pairs only:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Suspension: for vehicles with standard suspension
• Fitting Position: Front Axle
• Height [mm]: 85
• Required quantity: 2
• Name: Puhver, vedrustus
• Manufacturer: MAX

• Fitting Position: Front Axle, Upper
• Material: Rubber
• Manufacturer: AUTO-GH
• Name: GH 621581

• Quantity per packing unit: 2
• Fitting Position: Front Axle
• Manufacturer: NTY

• Suspension: for vehicles with standard suspension
• Fitting Position: Front Axle
• Height [mm]: 85
• Required quantity: 2
• replacement in pairs recommended:
• Name: PUHVER, VEDRUSTUS
• Manufacturer: MEY

• Fitting Position: Rear Axle
• Name: CFD PK0311
• Manufacturer: DACO

• Fitting Position: Front Axle
• Name: CFD PK0306
• Manufacturer: DACO

• Suspension: for vehicles with standard suspension
• Fitting Position: Rear Axle
• Manufacturer: KAMOKA

• Fitting Position: Rear Axle both sides
• Supplementary Article/Info 2: with box nut, with washers
• Fabrication Number: ZWD-BM-067SK
• Manufacturer: NTY
• Name: NTY ZWD-BM-067SK

• Suspension: for vehicles with M technology
• Fitting Position: Rear Axle Left, Rear Axle Right

• Length [mm]: 77
• Outer Diameter [mm]: 24
• External Thread Size: M10 x 1,5
• Thread Length [mm]: 28
• Quality/ Grade: 10.9
• Spanner Size: 16
• Bolt Head-/Nut Design: Male Hex
• Surface: Zinc-coated
• Screw length below head [mm]: 66
• Fitting Position: Rear Axle
• Weight [kg]: 0.06
• for OE number: 33 30 6 760 591 S1
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: —RUBA ZAWIESZENIA BMW T. SERIES 5 (E39) 95- LE/PR E39 (MIMO—RODOWA)

• Suspension: for vehicles with M technology
• Fitting Position: Rear Axle
• Name: Tolmukaitse komplekt,Amordid
• Manufacturer: MAX

• Suspension: for vehicles with sports suspension
• Fitting Position: Front Axle
• Manufacturer: JP GROUP

• Fitting Position: Rear Axle
• Suspension: for vehicles with standard suspension

• Suspension: for vehicles with standard suspension
• Fitting Position: Front Axle
• Name: TOLMUKAITSE KOMPLEKT,AMORDID
• Manufacturer: MAX

• Fitting Position: Front Axle
• Name: Tolmukaitse komplekt,Amordid
• Manufacturer: MAX

Suspension: for vehicles with standard suspension, for vehicles without sports suspension

• Fitting Position: Front Axle
• Suspension: for vehicles with standard suspension
• Manufacturer: JP GROUP

• Fitting Position: Rear Axle
• Manufacturer: ASHIKA

Suspension: for vehicles without M technology, for vehicles without sports suspension

• Fitting Position: Front Axle
• Manufacturer: ASHIKA

Suspension: for vehicles with standard suspension, for vehicles without sports suspension

• Suspension: for vehicles with standard suspension
• Quantity per packing unit: 2
• Fitting Position: Front Axle
• Height [mm]: 85
• Weight [kg]: 0.067
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Suspension: for vehicles with standard suspension
• Fitting Position: Front Axle
• Manufacturer: KAMOKA AMORTYZATORY

• Suspension: for vehicles with standard suspension
• Fitting Position: Rear Axle
• Name: Tolmukaitse komplekt,Amordid
• Manufacturer: MAX

• Fitting Position: Rear Axle
• Manufacturer: MAGNETI MARELLI

• Fitting Position: Front Axle
• Name: Tolmukaitse komplekt,Amordid
• Manufacturer: JPA

Suspension: for vehicles with standard suspension, for vehicles without sports suspension

• Fitting Position: Front Axle, Front Axle both sides
• Suspension: for vehicles with standard suspension
• Name: Shock absorber protection kit left+right
• Quality class: PJ

Lisainfo: "Tootja: SRL
BMW
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
BMW
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle
• Manufacturer: JAPKO

Suspension: for vehicles with standard suspension, for vehicles without sports suspension

• Fitting Position: Front Axle, Front Axle both sides
• Suspension: for vehicles with M technology
• Name: Shock absorber protection kit left+right
• Quality class: PJ

Lisainfo: "Tootja: SRL
BMW
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
BMW
(kvaliteediklass: PJ)"

• Fitting Position: Rear Axle, Rear Axle both sides
• Axle Version: Sport
• Quality class: PJ
• Name: Shock absorber protection kit left+right

Lisainfo: "Tootja: SRL
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle
• Suspension: for vehicles with standard suspension
• Manufacturer: DENCKERMANN AMORTYZATORY

• Weight [kg]: 0.085
• Packaging length [cm]: 7.9
• Packaging width [cm]: 2.4
• Packaging height [cm]: 2.4
• Manufacturer: FEBEST

• Fitting Position: Rear Axle
• Name: Tolmukaitse komplekt,Amordid
• Manufacturer: JPA

Suspension: for vehicles without M technology, for vehicles without sports suspension

• Fitting Position: Front Axle
• Weight [kg]: 0.234
• Name: Tolmukaitse komplekt,Amordid
• Manufacturer: FEB

Suspension: for vehicles without sports suspension, for vehicles without M technology General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Supplementary Article/Info 2: with nut, with washers
• Material: Metal
• Fabrication Number: ZWD-BM-066SK
• Manufacturer: NTY

• Fitting Position: Front Axle
• for OE number: 1 091 868
• Name: TOLMUKAITSE KOMPLEKT,AMORDID
• Manufacturer: MAX

• Fitting Position: Front Axle
• Manufacturer: MAGNETI MARELLI
• Name: MM APK0069

• Fitting Position: Rear Axle, Rear Axle both sides
• Suspension: for vehicles with standard suspension
• Quality class: PJ
• Name: Shock absorber protection kit left+right

Lisainfo: "Tootja: SRL
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
(kvaliteediklass: PJ)"

• Suspension: for vehicles with sports suspension
• Thickness [mm]: 70
• Material: PU (Polyurethane)
• Fitting Position: Front Axle
• Weight [kg]: 0.067
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Suspension: for vehicles with standard suspension
• Weight [kg]: 0.4
• Manufacturer: DENCKERMANN AMORTYZATORY

• Thickness [mm]: 85
• Material: PU (Polyurethane)
• Fitting Position: Front Axle
• Weight [kg]: 0.067
• Name: PUHVER, VEDRUSTUS
• Manufacturer: FEB

Suspension: for vehicles without sports suspension, for vehicles without M technology General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Suspension: for vehicles with standard suspension
• Fitting Position: Rear Axle
• Weight [kg]: 0.23
• Name: Tolmukaitse komplekt,Amordid
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Suspension: for vehicles with standard suspension
• Fitting Position: Rear Axle
• Quantity Unit: Set
• Name: TOLMUKAITSE KOMPLEKT,AMORDID
• Manufacturer: MEY

• Fitting Position: Rear Axle
• Suspension: for vehicles with sports suspension
• Name: TOLMUKAITSE KOMPLEKT,AMORDID
• Manufacturer: SAA

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Weight [kg]: 0.4
• Guarantee: 5 years guarantee
• Packaging length [cm]: 22
• Packaging width [cm]: 11
• Packaging height [cm]: 18
• Manufacturer: MONROE

• Quantity per packing unit: 2
• Fitting Position: Rear Axle
• Name: TOLMUKAITSE KOMPLEKT,AMORDID
• Manufacturer: KYB

Suspension: for vehicles without M technology, for vehicles without sports suspension

• Fitting Position: Front Axle
• Suspension: for vehicles with standard suspension
• Name: TOLMUKAITSE KOMPLEKT,AMORDID
• Manufacturer: SAA

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle
• Suspension: for vehicles with standard suspension
• Name: TOLMUKAITSE KOMPLEKT,AMORDID
• Manufacturer: SAA

SVHC: No information available, please contact the manufacturer!

• Weight [kg]: 0.219
• Packaging length [cm]: 12
• Packaging width [cm]: 3.3
• Packaging height [cm]: 3.3
• Manufacturer: FEBEST

• Block Separation:
• Fitting Position: Front Axle
• Quantity Unit: Set
• Name: TOLMUKAITSE KOMPLEKT,AMORDID
• Manufacturer: MEY

Suspension: for vehicles with M technology, for vehicles with sports suspension

• Fitting Position: Rear Axle
• Quantity per packing unit: 2
• Weight [kg]: 0.4
• Guarantee: 5 years guarantee
• Packaging length [cm]: 22
• Packaging width [cm]: 11
• Packaging height [cm]: 18
• Manufacturer: MONROE

• Quantity per packing unit: 2
• Fitting Position: Front Axle
• Name: Tolmukaitse komplekt,Amordid
• Manufacturer: KYB

Suspension: for vehicles with standard suspension, for vehicles without sports suspension

• Fitting Position: Rear Axle
• for OE number: 33536761027
• Manufacturer: AUTOFREN SEINSA
• Name: SE D5-130

• Fitting Position: Front Axle
• Suspension: for vehicles with M technology
• Name: TOLMUKAITSE KOMPLEKT,AMORDID
• Manufacturer: SAA
• Lisainfo: 900 084
• Additional information: 900 084

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• for OE number: 31330146239
• Manufacturer: AUTOFREN SEINSA
• Name: SE D5-061

• Suspension: for vehicles with standard suspension
• Fitting Position: Front Axle
• Name: BI 11-270270
• Manufacturer: BILSTEIN

• Fitting Position: Front Axle
• Weight [kg]: 0.371
• Packaging length [cm]: 16.8
• Packaging width [cm]: 13.8
• Packaging height [cm]: 8.4
• Manufacturer: FEBEST