Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Wall Thickness [mm]: 4
- Supplementary Article/Info 2: with clamp
- Inner Diameter 1 [mm]: 31
- Inner Diameter 2 [mm]: 38
- Weight [kg]: 0.07
- Manufacturer: FEBI BILSTEIN
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber) General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fabrication Number: NUP-
BM- 010 - Fitting Position: engine sided
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Fabrication Number: CPP-
BM- 015 - Cooling Hose: from thermostat to waterpump
- Inner Diameter 1 [mm]: 38
- Inner Diameter 2 [mm]: 38
- Length [mm]: 192
- Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Material: MVQ
(silicone rubber) -
Name: Tihend,
jahutusvedelikutorustik - Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: engine sided
-
Name: Tihend,
jahutusvedelikutorustik - Manufacturer: ELR
-
Materjal: EPDM
(Etüleen- Propüleen- Dieen- Kautsuk) - Jahutustorustik: termostaadist veepumpa
-
Kaal (kg): 0,
18 - Garantii: 3 aastat garantii
- Manufacturer: SKV GERMANY
- Name: CE 43SKV745
- for OE number: 17 12 7 521 778
- Forward- /Backflow: for backflow
- Cooling Hose: from thermostat to radiator
-
Fabrication Number: CPP-
BM- 025 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Cooling Hose: from engine to thermostat
-
Fabrication Number: CPP-
BM- 085
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- for OE number: 17 12 7 565 780
- Forward- /Backflow: for backflow
- Cooling Hose: from thermostat to radiator
-
Fabrication Number: GPP-
BM- 041 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Cooling Hose: from heat exchanger to heater valve
- for OE number: 64 21 6 911 001
- Weight [kg]: 0.137
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Cooling Hose: from thermostat to waterpump
- Weight [kg]: 0.132
- Manufacturer: FEBI BILSTEIN
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber) General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Cooling Hose: from thermostat to waterpump
- Supplementary Article/Info 2: without clamps
- Name: JAHUTUSVOOLIK
- Manufacturer: MEY
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
-
Materjal: EPDM
(Etüleen- Propüleen- Dieen- Kautsuk) - Jahutustorustik: termostaadist veepumpa
- Manufacturer: METZGER
- Material: Rubber with fabric lining
-
Fitting Position: Radiator,
Upper Right - Hose Type: Moulded Hose
- Heating/Cooling: with thermal switch connector
- Supplementary Article/Info 2: with quick couplers
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Cooling Hose: from connecting pipe to oil cooler
-
Materjal: EPDM
(Etüleen- Propüleen- Dieen- Kautsuk) - Jahutustorustik: Torujuhe pärast õlijahutit
- Manufacturer: METZGER
-
Materjal: EPDM
(Etüleen- Propüleen- Dieen- Kautsuk) - Siseläbimõõt 1 [mm]: 32
- Siseläbimõõt 2 (mm): 32
-
Kaal (kg): 0,
28 - Värv: must
- Garantii: 3 aastat garantii
- vooliku pikkus [mm]: 198
- sobiv sõidukitüübi jaoks: Sõiduauto
- Manufacturer: SKV GERMANY
- Name: CE 24SKV261
-
Materjal: EPDM
(Etüleen- Propüleen- Dieen- Kautsuk) -
Siseläbimõõt 1 [mm]: 15,
5 -
Siseläbimõõt 2 (mm): 7,
5 -
Kaal (kg): 0,
14 - Värv: must
- Garantii: 3 aastat garantii
- vooliku pikkus [mm]: 965
- Name: CE 43SKV703
- Manufacturer: ESEN SKV
- Length [mm]: 290
- Cooling Hose: from engine to thermostat
- Name: Jahutusvoolik
- Manufacturer: MAX
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber), Plastic
- Length [mm]: 198
- Fitting Position: Upper Right
- Name: Jahutusvoolik
- Manufacturer: MAX
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Fitting Position: Lower
- Colour: black
- Hose Length [mm]: 198
- Inner Diameter 1 [mm]: 32
- Inner Diameter 2 [mm]: 32
- Observe broschure:
- Name: Jahutusvoolik
- Manufacturer: GAT
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Vehicle Equipment: for vehicles without automatic climate control
- for OE number: 64 21 6 923 944
- Weight [kg]: 0.224
- Manufacturer: VAICO
Cooling Hose: from water pump to heater valve, from heat exchanger to auxiliary water pump General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Cooling Hose: from vacuum valve to auxiliary water pump
- Vehicle Equipment: for vehicles with automatic climate control
-
Materjal: EPDM
(Etüleen- Propüleen- Dieen- Kautsuk) - Manufacturer: METZGER
- for OE number: 17127521777
- Fitting Position: Upper
- Material: Silicone
- Supplementary Article/Supplementary Info: with pipe socket
- Weight [g]: 387
- Inner Diameter 1 [mm]: 38
- Inner Diameter 2 [mm]: 38
- Inner Diameter 3 [mm]: 20
- Name: Jahutusvoolik
- Manufacturer: IMP
- Pikkus (mm): 290
-
Materjal: Plastik,
EPDM (Etüleen- Propüleen- Dieen- Kautsuk) - Piirangutega toode/piirangu info: koos kiirühendusega
- Jahutustorustik: mootorist termostaati
-
Kaal (kg): 0,
32 - Garantii: 3 aastat garantii
- Name: CE 24SKV260
- Manufacturer: ESEN SKV
- Material: Rubber
- Supplementary Article/Supplementary Info: with pipe socket
- Weight [g]: 497
- Length [mm]: 585
- Inner Diameter 1 [mm]: 25
- Inner Diameter 2 [mm]: 25
- Name: IM 225305
- Manufacturer: ORIGINAL IMPERIUM
- Installatsiooni pool: üleval
-
Materjal: EPDM
(Etüleen- Propüleen- Dieen- Kautsuk) - Siseläbimõõt 1 [mm]: 38
- Siseläbimõõt 2 (mm): 38
-
Kaal (kg): 0,
4 - Värv: must
- Garantii: 3 aastat garantii
- vooliku pikkus [mm]: 419
- Siseläbimõõt 3 [mm]: 20
- sobiv sõidukitüübi jaoks: Sõiduauto
- Manufacturer: SKV GERMANY
- Fitting Position: Upper
- Transmission Type: Manual Transmission
- Colour: black
- Hose Length [mm]: 419
- Inner Diameter 1 [mm]: 38
- Inner Diameter 2 [mm]: 38
- Inner Diameter 3 [mm]: 20
- Observe broschure:
- Manufacturer: GATES
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Hose Length [mm]: 198
- Fitting Position: Upper Right
- Weight [kg]: 0.237
- Supplementary Article/Supplementary Info: with quick lock
- Name: JAHUTUSVOOLIK
- Manufacturer: FEB
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber) General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Length [mm]: 290
- Cooling Hose: from engine to thermostat
- Weight [kg]: 0.272
- Supplementary Article/Supplementary Info: with quick coupling
- Name: JAHUTUSVOOLIK
- Manufacturer: FEB
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber), Plastic General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Jahutustorustik: mootorist termostaati
Jahutustorustik: võrdustusanumast tuulutustorusse
- for OE number: 17127565780
- Material: Rubber
- Supplementary Article/Supplementary Info: with pipe socket
- Weight [g]: 254
- Length [mm]: 274
- Inner Diameter 1 [mm]: 38
- Inner Diameter 2 [mm]: 38
- Name: IM 224969
- Manufacturer: ORIGINAL IMPERIUM
- Transmission Type: Manual Transmission
-
Fitting Position: Radiator,
Upper - Material: Rubber with fabric lining
- Hose Type: Moulded Hose
- Supplementary Article/Info 2: with quick couplers
- Name: JAHUTUSVOOLIK
- Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Transmission Type: Automatic Transmission
- Cooling Hose: from engine to oil cooler and engine cooler
- Inner Diameter 1 [mm]: 15
- Weight [kg]: 0.38
- Inner Diameter 2 [mm]: 15
- Supplementary Article/Supplementary Info: with quick coupling
- Name: SW 33 10 0779
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Upper
- Transmission Type: Automatic Transmission
- Colour: black
- Hose Length [mm]: 362
- Inner Diameter 1 [mm]: 32
- Inner Diameter 2 [mm]: 32
- Inner Diameter 3 [mm]: 8
- Observe broschure:
- Name: Jahutusvoolik
- Manufacturer: GAT
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Transmission Type: Automatic Transmission
- Pikkus (mm): 215
-
Materjal: Plastik,
EPDM (Etüleen- Propüleen- Dieen- Kautsuk) - Piirangutega toode/piirangu info 2: kiirliidesega
- Jahutustorustik: mootoriradiaatorist veepumpa
-
Kaal (kg): 0,
56 - Garantii: 3 aastat garantii
- Name: CE 24SKV262
- Manufacturer: ESEN SKV
- Transmission Type: Automatic Transmission
- Length [mm]: 215
- Cooling Hose: from engine cooler to water pump
- Weight [kg]: 0.456
- Supplementary Article/Info 2: with quick couplers
- Name: JAHUTUSVOOLIK
- Manufacturer: FEB
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber), Plastic General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- for OE number: 17127521776
- Weight [g]: 513
- Inner Diameter 1 [mm]: 32
- Inner Diameter 2 [mm]: 32
- Inner Diameter 3 [mm]: 8
- Name: IM 222231
- Manufacturer: ORIGINAL IMPERIUM
- Forward- /Backflow: for foreflow
- Fitting Position: Upper Left
- Transmission Type: Automatic Transmission
-
Materjal: EPDM
(Etüleen- Propüleen- Dieen- Kautsuk) - Küte/Jahutus: koos õhuklapiga
- Manufacturer: METZGER
Cooling Hose: from coolant reg. housing to oil cooler and engine cooler