• Operating voltage [V]: 12
• Sensor Type: Passive sensor
• Fitting Depth [mm]: 28
• Cable Length [mm]: 415
• Supplementary Article/Info 2: with seal ring
• Number of pins: 3
• Fitting Position: Intake Side
• Manufacturer: JP GROUP
• Lisainfo: Sensor, camshaft position
• Additional information: Sensor, camshaft position

• Engine Code: N43 B20 A
• Thread Size: M12x1,5
• Spanner Size: 22
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Engine Code: N43 B20 A
• Sensor Type: Active sensor
• for OE number: 12 14 1 435 351
• Manufacturer: KAMOKA

• Number of pins: 2
• Colour: black
• Supplementary Article/Supplementary Info: with seal
• Thread Size: M12x1,5, M 12x1,5
• Spanner Size: 22
• Connector Shape: angular
• Fitting Position: Cylinder Head
• Quality: IAM
• Power [W]: 0.06
• Manufacturer: METZGER

• Thread Size: M 12x1,5
• Number of pins: 2
• Housing Colour: black
• Manufacturer: FAE

• for OE number: 13 62 7 525 014
• Sensor Type: Hall Sensor
• Number of pins: 3
• Fitting Depth [mm]: 28
• Supplementary Article/Info 2: without cable
• Connector Shape: oval
• Number of mounting bores: 1
• Fabrication Number: ECP-BM-005
• Manufacturer: NTY

• Operating voltage [V]: 12
• Sensor Type: Active sensor
• Fitting Depth [mm]: 28
• Supplementary Article/Info 2: with seal ring, without cable
• Number of pins: 3
• Manufacturer: JP GROUP
• Lisainfo: Sensor, camshaft position
• Additional information: Sensor, camshaft position

• Number of pins: 3
• Weight [kg]: 0.03
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 17SKV494

• Engine Code: N43 B20 A
• Sensor Type: Active sensor
• for OE number: 13 62 7 787 192
• Manufacturer: KAMOKA

• Colour: black
• Number of pins: 3
• Fabrication Number: ECM-BM-005
• Manufacturer: NTY

Lisainfo: ENG. 1.6,1.8,2.0,2.5,3.0,4.4 BMW 1 (E81/87) 04-12, 3 (E46/90) 01-13, 5 (E60/61) 05-10, X3 (E83)05-10, X5 (E53/70) 01-10 Additional information: ENG. 1.6,1.8,2.0,2.5,3.0,4.4 BMW 1 (E81/87) 04-12, 3 (E46/90) 01-13, 5 (E60/61) 05-10, X3 (E83)05-10, X5 (E53/70) 01-10

• Required quantity: 2
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Name: CZUJNIK POO½ENIA WAKA ROZRZ. BMW 1 E81
• Manufacturer: BRM

• Height [mm]: 27.9
• Sensor Type: Hall Sensor
• Number of connectors: 3
• Manufacturer: VERNET

• Engine Code: N43 B20 A
• Required quantity: 2
• Sensor Type: Active sensor
• Number of pins: 3
• Voltage [V]: 12
• Name: Andur,Nukkvollipositsioon
• Manufacturer: MAX

• Fitting Position: Intake Manifold
• Number of pins: 3
• Supplementary Article/Info 2: with seal ring
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Required quantity: 1
• Name: CZUJNIK CI—N. POWIETRZA BMW 5 F10
• Manufacturer: BRM

• Number of circuits: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: KAMOKA

• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Engine Code: N43 B20 A
• Length [mm]: 210
• Number of pins: 3
• Fitting Depth [mm]: 14
• Resistor M[ohm]: 13.5
• Manufacturer: ERA

• Quantity: 1
• Number of pins: 3
• Pressure from [kPA]: 22
• Name: DE PS20095-12B1
• Manufacturer: DELPHI

• Number of pins: 3
• Fabrication Number: EFP-BM-005

• Number of pins: 3
• Fitting Position: High Pressure Pump (high pressure side)
• Fabrication Number: EFP-BM-006
• Manufacturer: NTY
• Name: NTY EFP-BM-006

• Fabrication Number: ESS-BM-003
• Manufacturer: NTY

• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Sensor Type: Hall Sensor
• Alternatively:
• Number of pins: 3
• Fitting Depth [mm]: 28
• Alternative Repair Kit: 550604
• Manufacturer: ERA

• Engine Code: N43 B20 A
• Required quantity: 2
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: EPS

• Engine Code: N43B20A,N46B20B
• Sensor Type: Hall Sensor
• Number of pins: 3
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Weight [kg]: 0.02
• Manufacturer: VALEO
• Name: VA 366149

• Housing Type: without housing
• Number of pins: 5
• Used part return not required:
• Fabrication Number: EPP-BM-015
• Manufacturer: NTY

• Number of pins: 3
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: DLP

• Lambda Sensor: Lambda Sensor
• Voltage [V]: 12
• Number of circuits: 4
• Weight [kg]: 0.09
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY

• Number of pins: 3
• Colour: black
• Manufacturer: FAE

• Lambda Sensor: Diagnostic Probe, Finger probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Transmission Type: Manual Transmission
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Number of pins: 3
• Weight [kg]: 0.06
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 17SKV620

• for OE number: 13 62 7 525 014
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: TRU

• Length [mm]: 49
• Number of connectors: 3
• Weight [kg]: 0.03
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Required quantity: 2
• Number of pins: 3
• Fitting Depth [mm]: 27.8
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: TRI

• Sensor Type: Hall Sensor
• Number of pins: 3
• Weight [kg]: 0.025
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of pins: 3
• Connector Shape: D Shape
• Number of mounting bores: 2
• for OE number: 13 62 8 617 097
• Manufacturer: MEAT&DORIA

• Required quantity: 2
• Voltage [V]: 12
• Corresponds to the original part in colour: black
• Sensor Type: Hall Sensor
• Number of pins: 3
• Number of mounting bores: 1
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PU009121011

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Resistor [Ohm]: 2.1
• Number of circuits: 4
• Conductor Number: 4
• Length [mm]: 300
• Cable Length [mm]: 300
• Lambda Sensor: Heated
• Name: LAMBDA ANDUR
• Manufacturer: MAG

• Number of pins: 3
• Weight [kg]: 0.06
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY

• Lambda Sensor: Lambda Sensor
• Cable Length [mm]: 290
• Alternatively:
• Number of circuits: 4
• Alternative Repair Kit: 570112
• Manufacturer: ERA

Manufacturer: MAGNETI MARELLI

• Required quantity: 1
• Supplementary Article/Supplementary Info: without suction pipe
• Number of pins: 5
• Quality class: PJ
• Name: Air flow sensor

• Connector Shape: D Shape
• Number of pins: 2
• Voltage [V]: 12
• Fitting Depth [mm]: 35
• Cable Length [mm]: 1,195
• Thread Size: M14x1.5
• Supplementary Article/Supplementary Info: with synthetic grease
• Name: Andur, heitgaasitemperatuur
• Manufacturer: NRF

• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Number of pins: 3
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Cable Length [mm]: 200
• Number of pins: 4
• Manufacturer: DELPHI
• Name: DE AS10241

• Number of pins: 3
• Sensor Type: Hall Sensor
• Warranty: 5 years warranty
• General Information: Sold in Hueco brand: printing and packaging
• Manufacturer: HUCO

• Engine Code: N43 B20 A
• Required quantity: 1
• Housing Colour: black
• Length [mm]: 225
• Cable Length [mm]: 315
• Name: DETONATSIOONIANDUR
• Manufacturer: EPS

• Number of pins: 3
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Number of pins: 3
• Manufacturer: METZGER

• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 8
• Overall Length [mm]: 670
• Available as universal article as well, see article no.: 0258986602
• Recommended change interval [km]: 250,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Version: Niederdrucksensor, AM
• Number of pins: 3
• Manufacturer: METZGER

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 5
• Housing Type: without housing
• Name: OHUMASSIMOOTJA
• Manufacturer: BRM

• Lambda Sensor: Lambda Sensor
• Voltage [V]: 12
• Colour: red
• Number of circuits: 5
• Weight [kg]: 0.15
• Operating Mode: Electric
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 09SKV905

• Thread Size: M10x1
• Spanner Size: 24
• Number of pins: 3
• Injection System: Common Rail
• Supplementary Article/Info 2: Low Pressure Side, with seal ring
• Housing Colour: black
• Connector Shape: oval
• Weight [kg]: 0.04
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Housing Type: without housing
• Number of pins: 5
• Plug Type: Male
• Housing Colour: black
• Voltage [V]: 12
• Recommended additional repairs: Air Filter
• Manufacturer: DELPHI

• Required quantity: 1
• Mounting Type: Bolted
• Number of pins: 5
• Supplementary Article/Supplementary Info: without suction pipe
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 8ET009142641

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Lambda Sensor: Broadband lambda sensor
• Thread Size: M18 x 1,5
• Cable Length [mm]: 900
• Supplementary Article/Supplementary Info: with thermal protection
• Number of pins: 6
• Fitting Position: before catalytic converter
• Name: Lambda andur
• Manufacturer: MEY

• Lambda Sensor: Lambda Sensor
• Weight [kg]: 0.15
• Warranty: 3 years warranty
• Technical Information: Universal
• Name: CE 09SKV915
• Manufacturer: ESEN SKV

• Number of pins: 9
• Weight [kg]: 0.08
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 17SKV424

• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 5
• Overall Length [mm]: 960
• Recommended change interval [km]: 250,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Lambda Sensor: Regulating Probe, Broadband lambda sensor
• Fitting Position: Left, Right, Exhaust Manifold
• Required quantity: 2
• Number of pins: 5
• Cable Length [mm]: 1,290
• for article number: 81668E
• Quality: OE EQUIVALENT
• Manufacturer: MEAT&DORIA

• Fitting Position: Left, Right, Exhaust Manifold
• Required quantity: 2
• Line insulation design: with silicone-coated woven-fibre insulation
• Cable Length [mm]: 1,405
• Thread Size: M18 x 1,5
• Conductor Number: 5
• Connector Shape: D Shape
• Length [mm]: 1,250
• Number of pins: 5
• Lambda Sensor: Regulating Probe, Thread pre-greased
• Number of circuits: 5
• Exhaust System: after catalytic converter
• Weight [kg]: 0.188
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Transmission Type: Automatic Transmission
• Colour: black
• Operating Mode: Electric
• Number of pins: 6
• Material: Plastic
• Supplementary Article/Info 2: with holding frame
• Manufacturer: METZGER

• Number of connectors: 5
• Manufacturer: METZGER

• Supplementary Article/Supplementary Info: with control unit
• Fitting Position: after catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Number of pins: 5
• Lambda Sensor: Thread pre-greased
• Cable Length [mm]: 590
• Connector Shape: oval
• Number of mounting bores: 2
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of pins: 5
• Cable Length [mm]: 590
• Product must be determined on the vehicle or the motor:
• for manufacturer number: 5WK9 6610L
• Observe service information:
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.