Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Fitting Position: Engine Compartment
- Cable Length [mm]: 250
-
Mounting Type: Plug-
in connection - Supplementary Article/Supplementary Info: with shrink connector
- Supplementary Article/Info 2: with plug
- Number of circuits: 2
- Weight [kg]: 0.017
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- for OE number: 240660144
- Manufacturer: MEAT&DORIA
- Number of circuits: 1
- Length [mm]: 150
- Connector Shape: round
- Cable insulation material: Silicone
- Cross Section [mm²] from: 2.5
-
Name: Kaabli remondikomplekt,
hoogknal - Manufacturer: MD
- Additional information: 25026 MD
- Lisainfo: 25026 MD
- Number of circuits: 1
- Length [mm]: 150
- Connector Shape: round
- Cable insulation material: Silicone
- Cross Section [mm²] from: 2.5
-
Name: Kaabli remondikomplekt,
hoogknal - Manufacturer: MD
- Additional information: 25002 MD
- Lisainfo: 25002 MD
- Supplementary Article/Supplementary Info: with accessories
- Number of pins: 2
- Number of circuits: 2
- Weight [kg]: 0.01
- Warranty: 3 years warranty
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 53SKV115
- Fitting Position: Engine Compartment
- Cable Length [mm]: 0
-
Mounting Type: Plug-
in connection - Supplementary Article/Supplementary Info: with plug insert
- Number of circuits: 1
- Weight [kg]: 0.015
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Engine Compartment
- Cable Length [mm]: 0
-
Mounting Type: Plug-
in connection - Supplementary Article/Supplementary Info: with plug insert
- short version:
- Number of circuits: 1
- Weight [kg]: 0.009
- Supplementary Article/Info 2: with multi plug
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Engine Compartment
- Cable Length [mm]: 250
-
Mounting Type: Plug-
in connection - Supplementary Article/Supplementary Info: with shrink connector
- Supplementary Article/Info 2: with plug
- Number of circuits: 4
- Weight [kg]: 0.044
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Length [mm]: 250
- Number of circuits: 1
- Cross Section [mm²] from: 0.75
- Cable insulation material: Silicone
-
Name: Paranduskomplekt,
kaablikomplekt - Manufacturer: MD
- Length [mm]: 100
- Number of pins: 5
- for OE number: 240660093
-
Name: Paranduskomplekt,
kaablikomplekt - Manufacturer: MD
- Light Design: Xenon
- Sensor Type: Lever Sensor
-
Manufacturer Restriction: BMW/
FIAT/ FORD, MERCEDES/ VAG - Number of circuits: 5
- Number of connectors: 6
- Cable Length [mm]: 100
- Cable cross-section from [mm²]: 0.5
- Plug Type: Shrink Connector
- Material: Silicone
- Cable Cross Section [mm²]: 0.5
- Manufacturer: METZGER
Manufacturer: MEAT&DORIA
-
Fitting Position: Vehicle Tailgate,
Left -
Cable Length [mm]: 1,
000 -
Supplementary Article/Info 2: without bellow,
with protection hose -
Plug Type: Butt Joint,
Soldered Pin Contact - Number of circuits: 12
- Weight [kg]: 0.15
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Fitting Position: Right,
Vehicle Tailgate -
Cable Length [mm]: 1,
000 -
Supplementary Article/Info 2: with protection hose,
without bellow -
Plug Type: Soldered Pin Contact,
Butt Joint - Number of circuits: 23
- Weight [kg]: 0.15
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Cable Length [mm]: 1,
250 - Supplementary Article/Info 2: with bellow
- Number of circuits: 23
- Weight [kg]: 0.116
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.