Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Construction Year to: 12.2006
- Engine Code: N52B25UL
- for OE number: 15407117
- Quality: OE
- Manufacturer Restriction: DENSO
- Thread Size: M18x1.5
- Cable Length [mm]: 425
- Number of pins: 4
- Weight [g]: 101
- Gross Weight [g]: 134
- Manufacturer: DENSO
Lambda Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor
Additional information: "Tootja: DENSO
KLASA C KOMBI (S202)
(kvaliteediklass: Q)"
Lisainfo: "Tootja: DENSO
KLASA C KOMBI (S202)
(kvaliteediklass: Q)"
- Engine Code: N52 B25 A
-
Thread Size: M12x1,
5 - Spanner Size: 22
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: EPS
- for OE number: 13 62 7 525 014
- Sensor Type: Hall Sensor
- Number of pins: 3
- Fitting Depth [mm]: 28
- Supplementary Article/Info 2: without cable
- Connector Shape: oval
- Number of mounting bores: 1
-
Fabrication Number: ECP-
BM- 005 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Engine Code: N52B25A
- Number of pins: 3
- Weight [kg]: 0.03
- Warranty: 3 years warranty
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 17SKV494
- Number of pins: 2
- Housing Colour: black
- Manufacturer: FAE
- Number of pins: 2
- Weight [kg]: 0.026
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Colour: black
- Number of pins: 3
-
Fabrication Number: ECM-
BM- 005 - Manufacturer: NTY
Lisainfo: ENG. 1.6,1.8,2.0,2.5,3.0,4.4 BMW 1 (E81/87) 04-12, 3 (E46/90) 01-13, 5 (E60/61) 05-10, X3 (E83)05-10, X5 (E53/70) 01-10 Additional information: ENG. 1.6,1.8,2.0,2.5,3.0,4.4 BMW 1 (E81/87) 04-12, 3 (E46/90) 01-13, 5 (E60/61) 05-10, X3 (E83)05-10, X5 (E53/70) 01-10
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Required quantity: 2
- Voltage [V]: 12
- Number of pins: 3
- Sensor Type: Hall Sensor
- Supplementary Article/Info 2: without cable
- Housing Colour: black
- Name: CZUJNIK POO½ENIA WAKA ROZRZ. BMW 1 E81
- Manufacturer: BRM
- Engine Code: N52 B25 A
- Required quantity: 2
- Sensor Type: Active sensor
- Number of pins: 3
- Voltage [V]: 12
-
Name: Andur,
Nukkvollipositsioon - Manufacturer: MAX
- Engine Code: N52 B25 A
- Fitting Position: Intake Manifold
- Number of pins: 3
- Supplementary Article/Info 2: with seal ring
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Required quantity: 1
- Name: CZUJNIK CIN. POWIETRZA BMW 5 F10
- Manufacturer: BRM
- Number of circuits: 4
- Lambda Sensor: Regulating Probe
- Manufacturer: KAMOKA
-
Fabrication Number: ESS-
BM- 001 - Number of pins: 4
- Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Lambda Sensor: Diagnostic Probe,
Thread pre- greased -
Fabrication Number: ESL-
SK- 000 - Manufacturer: NTY
-
Name: NTY ESL-
SK- 000
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Number of pins: 3
- Supplementary Article/Info 2: without cable
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Sensor Type: Hall Sensor
- Alternatively:
- Number of pins: 3
- Fitting Depth [mm]: 28
- Alternative Repair Kit: 550604
- Manufacturer: ERA
- Engine Code: N52 B25 A
- Required quantity: 2
-
Name: ANDUR,
NUKKVOLLIPOSITSIOON - Manufacturer: EPS
- Construction Year from: 03.2005
- Construction Year to: 12.2006
- Engine Code: N52B25UL
- Sensor Type: Hall Sensor
- Number of pins: 3
- Connector Shape: oval
- Supplementary Article/Info 2: without cable
- Weight [kg]: 0.02
- Manufacturer: VALEO
- Name: VA 366149
- Housing Type: without housing
- Number of pins: 5
- Used part return not required:
-
Fabrication Number: EPP-
BM- 015 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Number of pins: 3
-
Name: ANDUR,
NUKKVOLLIPOSITSIOON - Manufacturer: DLP
- Lambda Sensor: Lambda Sensor
- Voltage [V]: 12
- Number of circuits: 4
- Weight [kg]: 0.09
- Resistor [Ohm]: 9
- Operating Mode: Electric
- Warranty: 3 years warranty
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Number of pins: 3
- Colour: black
- Manufacturer: FAE
-
Lambda Sensor: Diagnostic Probe,
Finger probe - Block Separation:
-
Fitting Position: after catalytic converter,
for cylinder 4- 6 - Number of circuits: 4
- Connector/Clamp: Connector may need adjustment
- Transmission Type: Manual Transmission
- Name: LAMBDA ANDUR
- Manufacturer: MAX
Vehicle Equipment: for vehicles with factory mounted tow bar, for vehicles without factory fitted towbar
- for OE number: 13 62 7 525 014
-
Name: ANDUR,
NUKKVOLLIPOSITSIOON - Manufacturer: TRU
- Required quantity: 2
- Number of pins: 3
- Fitting Depth [mm]: 27.8
-
Name: ANDUR,
NUKKVOLLIPOSITSIOON - Manufacturer: TRI
- Sensor Type: Hall Sensor
- Number of pins: 3
- Weight [kg]: 0.025
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Number of pins: 3
- for OE number: 13 62 8 617 097
- Manufacturer: MEAT&DORIA
- Required quantity: 2
- Voltage [V]: 12
- Corresponds to the original part in colour: black
- Sensor Type: Hall Sensor
- Number of pins: 3
- Number of mounting bores: 1
- Assy./disassy. by qualified personnel required!:
- Manufacturer: HELLA
- Name: HE 6PU009121011
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Length [mm]: 49
- Number of connectors: 3
- Weight [kg]: 0.03
- Supplementary Article/Info 2: with seal ring
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front
-
Lambda Sensor: Diagnostic Probe,
Heated -
External Thread Size: M18 x 1,
5 - Spanner Size: 22
- Number of circuits: 4
- Cable Length [mm]: 650
- Weight [kg]: 0.095
- Name: SW 33 10 3198
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: after catalytic converter
-
Lambda Sensor: Heated,
Diagnostic Probe -
External Thread Size: M18 x 1,
5 - Spanner Size: 22
- Number of circuits: 4
- Cable Length [mm]: 460
- Weight [kg]: 0.086
- Name: SW 33 10 3200
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Manufacturer: MAGNETI MARELLI
- Required quantity: 1
- Supplementary Article/Supplementary Info: without suction pipe
- Number of pins: 5
- Quality class: PJ
- Name: Air flow sensor
- Lambda Sensor: Regulating Probe
-
Length [mm]: 1,
400 -
Fabrication Number: ESL-
BM- 022 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Engine Code: N52 B25 A,
N 52 B 25 - Colour: black
- Number of pins: 3
-
Name: Andur,
Nukkvollipositsioon - Manufacturer: VDO
-
Engine Code: N52 B25 A,
N52 B25 B, N52 B25 BE - for facelift:
- Vehicle Equipment: for vehicles without trailer hitch
-
Line insulation design: with silicone-
coated woven- fibre insulation - Number of pins: 4
- for OE number: V99760001
- Cable Length [mm]: 210
- Number of circuits: 4
- Weight [kg]: 0.09
- Length [mm]: 350
- Exhaust System: after catalytic converter
- Manufacturer: VEMO GERMANY
Lambda Sensor: Diagnostic Probe, Finger probe, Heated, Thread pre-greased Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Fitting Position: Front,
Exhaust Manifold, after catalytic converter - Engine Code: N52 B25 A
- Supplementary Article/Info 2: Catalytic Converter at exhaust manifold
-
Line insulation design: with silicone-
coated woven- fibre insulation -
Lambda Sensor: Planar probe,
Heated, Thread pre- greased - Cable Length [mm]: 210
- Number of circuits: 4
- Weight [kg]: 0.09
- Manufacturer: VEMO GERMANY
Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Fitting Position: for cylinder 1-
3, after catalytic converter -
Lambda Sensor: Diagnostic Probe,
Planar probe, Heated - Vehicle Equipment: for vehicles with trailer hitch
- Cable Length [mm]: 614
- Manufacturer: DELPHI
-
Name: DE ES20368-
12B1
- Construction Year to: 12.2006
- Engine Code: N52B25UL
- Quality: OE
- Manufacturer Restriction: DENSO
- Thread Size: M18x1.5
- Cable Length [mm]: 750
- Number of pins: 4
- Weight [g]: 93
- Gross Weight [g]: 140
- Manufacturer: DENSO
-
Name: DN DOX-
0150 - Quality class: Q
Lambda Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor
Additional information: "Tootja: DENSO
(kvaliteediklass: Q)"
Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"
- Number of pins: 3
- Sensor Type: Hall Sensor
- Warranty: 5 years warranty
-
General Information: Sold in Hueco brand:
printing and packaging - Manufacturer: HUCO
- Cable Length [mm]: 515
- Number of pins: 4
- Name: Detonatsiooniandur
- Manufacturer: DLP
- Lambda Sensor: Diagnostic Probe
- Block Separation:
- Number of circuits: 4
-
Recommended change interval [km]: 160,
000 - Connector/Clamp: Connector may need adjustment
- Name: LAMBDA ANDUR
- Manufacturer: BOS
Fitting Position: after catalytic converter, for cylinder 1-3, for cylinder 4-6 Vehicle Equipment: for vehicles with factory mounted tow bar, for vehicles without factory fitted towbar
- Number of pins: 4
- Manufacturer: FAE
- Lambda Sensor: Heated
- Number of pins: 4
- Cable Length [mm]: 450
- for article number: 81633E
- Quality: OE EQUIVALENT
- Name: Lambda andur
- Manufacturer: MD
- Number of pins: 3
- Manufacturer: METZGER
- Lambda Sensor: Diagnostic Probe
-
Fitting Position: after catalytic converter,
for cylinder 4- 6 - Vehicle Equipment: for vehicles without factory fitted towbar
- Number of circuits: 4
- Overall Length [mm]: 380
- Available as universal article as well, see article no.: 0258986602
-
Recommended change interval [km]: 250,
000 - Name: LAMBDA ANDUR
- Manufacturer: BOS
- Engine Code: N52 B25 A
- Required quantity: 1
- Length [mm]: 500
- Cable Length [mm]: 600
- Name: DETONATSIOONIANDUR
- Manufacturer: EPS
- Lambda Sensor: Diagnostic Probe
-
Fitting Position: after catalytic converter,
for cylinder 1- 3 - Vehicle Equipment: for vehicles with factory mounted tow bar
- Number of circuits: 4
- Overall Length [mm]: 482
-
Recommended change interval [km]: 250,
000 - Name: LAMBDA ANDUR
- Manufacturer: BOS
- Number of connectors: 4
-
Cable Length [mm]: 535,
435 - Weight [kg]: 0.086
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Lambda Sensor: Lambda Sensor
- Weight [kg]: 0.2
- Warranty: 3 years warranty
- Always compare old and new part (in particular OE No.):
- Name: CE 09SKV405
- Manufacturer: ESEN SKV
- Lambda Sensor: Lambda Sensor
- Cable Length [mm]: 640
- Number of pins: 6
- Total Length [mm]: 780
- Manufacturer: ERA
- Construction Year to: 11.2005
-
Lambda Sensor: Regulating Probe,
Broadband lambda sensor, Heated -
Fitting Position: for cylinder 4-
6, before catalytic converter - Cable Length [mm]: 312
- Manufacturer: DELPHI
-
Name: DE ES20555-
12B1
-
Fitting Position: for cylinder 4-
6, after catalytic converter - Vehicle Equipment: for vehicles with factory mounted tow bar
- Lambda Sensor: Planar probe
-
Thread Size: M18 x 1,
5 - Cable Length [mm]: 460
- Supplementary Article/Supplementary Info: with thermal protection
- Number of pins: 4
- Name: Lambda andur
- Manufacturer: MEY
- Required quantity: 1
- Voltage [V]: 12
- Number of pins: 5
- Housing Type: without housing
- Name: OHUMASSIMOOTJA
- Manufacturer: BRM
- Construction Year from: 12.2005
-
Lambda Sensor: Regulating Probe,
Broadband lambda sensor, Heated - Fitting Position: before catalytic converter
-
Engine Code: N52 B25 A,
N52 B25 B, N52 B25 BE - Cable Length [mm]: 1
- Manufacturer: DLP
Name: SONDA LAMBDA BMW 125I, 130I, 135I, 323I TOURING 04-16
- Lambda Sensor: Lambda Sensor
- Voltage [V]: 12
- Colour: red
- Number of circuits: 5
- Weight [kg]: 0.15
- Operating Mode: Electric
- Warranty: 3 years warranty
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 09SKV905
- Lambda Sensor: Diagnostic Probe
-
Fitting Position: after catalytic converter,
for cylinder 1- 3 - Vehicle Equipment: for vehicles without factory fitted towbar
- Number of circuits: 4
- Overall Length [mm]: 430
- Available as universal article as well, see article no.: 0258986602
-
Recommended change interval [km]: 250,
000 - Name: LAMBDA ANDUR
- Manufacturer: BOS
- Engine Code: N52 B25 A
- Construction Year to: 11.2005
-
Fitting Position: for cylinder 1-
3, before catalytic converter - Required quantity: 1
- Length [mm]: 380
- Cable Length [mm]: 400
- Conductor Number: 5
- Number of circuits: 5
- Name: EP 1.998.467
- Manufacturer: EPS
Lambda Sensor: Regulating Probe, Heated, Planar probe, Broadband lambda sensor, Thread pre-greased
- Fitting Position: before catalytic converter
-
Lambda Sensor: Regulating Probe,
Heated -
External Thread Size: M18 x 1,
5 - Spanner Size: 22
- Number of circuits: 5
- Cable Length [mm]: 406
- Weight [kg]: 0.097
- Name: SW 33 10 4087
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Construction Year from: 12.2005
-
Lambda Sensor: Regulating Probe,
Broadband lambda sensor, Heated -
Fitting Position: for cylinder 4-
6, before catalytic converter - Cable Length [mm]: 910
-
Name: DE ES21275-
12B1 - Manufacturer: DELPHI
- Engine Code: N52 B25 A
- Construction Year to: 11.2005
-
Fitting Position: for cylinder 4-
6, before catalytic converter - Required quantity: 1
- Length [mm]: 340
- Cable Length [mm]: 350
- Conductor Number: 5
- Number of circuits: 5
- Name: EP 1.998.464
- Manufacturer: EPS
Lambda Sensor: Regulating Probe, Heated, Planar probe, Broadband lambda sensor, Thread pre-greased
- Lambda Sensor: Diagnostic Probe
-
Fitting Position: after catalytic converter,
for cylinder 4- 6 - Vehicle Equipment: for vehicles with factory mounted tow bar
- Number of circuits: 4
- Overall Length [mm]: 510
- Available as universal article as well, see article no.: 0258986602
-
Recommended change interval [km]: 250,
000 - Name: LAMBDA ANDUR
- Manufacturer: BOS
- Construction Year to: 11.2005
-
Lambda Sensor: Regulating Probe,
Broadband lambda sensor -
Fitting Position: for cylinder 4-
6, before catalytic converter - Required quantity: 1
- Cable Length [mm]: 400
- Number of pins: 6
- Assy./disassy. by qualified personnel required!:
-
SVHC: 7439-
92- 1; Lead - Manufacturer: HELLA
- Name: HE 6PA009166801
Brief Information: *** HELLA Electronics OE competence for over 60 years.
-
Engine Code: N52 B25 A,
N52 B25 B, N52 B25 BE - Housing Type: without housing
- Number of pins: 5
- Plug Type: Male
- Housing Colour: black
- Voltage [V]: 12
- Recommended additional repairs: Air Filter
- Manufacturer: DELPHI
-
Name: DE AF10446-
12B1
- Fitting Position: before catalytic converter
-
Lambda Sensor: Regulating Probe,
Heated -
External Thread Size: M18 x 1,
5 - Spanner Size: 22
- Number of circuits: 5
- Cable Length [mm]: 406
- Weight [kg]: 0.097
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Production date to: 31.10.2005
- Lambda Sensor: Broadband lambda sensor
-
Thread Size: M18 x 1,
5 - Cable Length [mm]: 400
- Number of pins: 6
- Name: Lambda andur
- Manufacturer: MEY
Fitting Position: before catalytic converter, for cylinder 1-3, for cylinder 4-6
- Construction Year from: 12.2005
- Lambda Sensor: Regulating Probe
-
Fitting Position: before catalytic converter,
for cylinder 4- 6 - Number of circuits: 5
- Overall Length [mm]: 910
-
Recommended change interval [km]: 250,
000 - Name: LAMBDA ANDUR
- Manufacturer: BOS
- Required quantity: 1
- Mounting Type: Bolted
- Number of pins: 5
- Supplementary Article/Supplementary Info: without suction pipe
- Assy./disassy. by qualified personnel required!:
- Manufacturer: HELLA
- Name: HE 8ET009142641
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Engine Code: N52 B25 A
- Construction Year from: 12.2005
-
Fitting Position: for cylinder 1-
3, before catalytic converter - Required quantity: 1
-
Length [mm]: 1,
400 -
Cable Length [mm]: 1,
500 - Conductor Number: 5
- Number of circuits: 5
- Name: EP 1.998.482
- Manufacturer: EPS
Lambda Sensor: Regulating Probe, Heated, Planar probe, Broadband lambda sensor, Thread pre-greased
- Construction Year to: 11.2005
- Lambda Sensor: Regulating Probe
-
Fitting Position: before catalytic converter,
for cylinder 4- 6 - Number of circuits: 5
- Overall Length [mm]: 340
-
Recommended change interval [km]: 250,
000 - Manufacturer: BOSCH
- Construction Year from: 12.2005
- Lambda Sensor: Regulating Probe
-
Fitting Position: before catalytic converter,
for cylinder 1- 3 - Number of circuits: 5
-
Overall Length [mm]: 1,
400 -
Recommended change interval [km]: 250,
000 - Name: LAMBDA ANDUR
- Manufacturer: BOS
- Construction Year from: 03.2005
- Construction Year to: 11.2005
- Engine Code: N52B25UL
- Fitting Position: before catalytic converter
- Number of pins: 6
- Cable Length [mm]: 350
-
Thread Size: M18x1,
5 - Switch Pressure [bar]: 4
- Weight [kg]: 0.14
- Name: VA 368396
- Manufacturer: VALEO
Lambda Sensor: Planar probe, Broadband lambda sensor, Thread pre-greased, Heated
-
Engine Code: N52 B25 A,
N52 B25 B - Construction Year from: 12.2005
-
Lambda Sensor: Regulating Probe,
Broadband lambda sensor - Fitting Position: Exhaust Manifold
- Required quantity: 2
- Number of pins: 5
-
Cable Length [mm]: 1,
290 - for article number: 81668E
- Quality: OE EQUIVALENT
- Manufacturer: MEAT&DORIA
- Construction Year to: 11.2005
- Lambda Sensor: Regulating Probe
-
Fitting Position: before catalytic converter,
for cylinder 1- 3 - Number of circuits: 5
- Overall Length [mm]: 380
-
Recommended change interval [km]: 250,
000 - Name: LAMBDA ANDUR
- Manufacturer: BOS
- Construction Year from: 11.2005
- Construction Year to: 12.2006
- Engine Code: N52B25UL
- Fitting Position: before catalytic converter
- Number of pins: 6
- Cable Length [mm]: 950
-
Thread Size: M18x1,
5 - Switch Pressure [bar]: 4
- Weight [kg]: 0.18
- Manufacturer: VALEO
- Name: VA 368430
Lambda Sensor: Planar probe, Broadband lambda sensor, Thread pre-greased, Heated
-
Engine Code: N52B25A,
N52B25B - Construction Year from: 12.2005
- Fitting Position: Exhaust Manifold
- Required quantity: 2
-
Line insulation design: with silicone-
coated woven- fibre insulation -
Cable Length [mm]: 1,
405 -
Thread Size: M18 x 1,
5 - Conductor Number: 5
- Connector Shape: D Shape
-
Length [mm]: 1,
250 - Number of pins: 5
-
Lambda Sensor: Regulating Probe,
Thread pre- greased - Number of circuits: 5
- Exhaust System: after catalytic converter
- Weight [kg]: 0.188
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Fitting Position: for cylinder 4-
6, after catalytic converter - Lambda Sensor: Diagnostic Probe
- Length [mm]: 400
- Number of pins: 4
- Technical Information Number: Universal 77015
- Manufacturer: FAE
- Transmission Type: Automatic Transmission
- Colour: black
- Operating Mode: Electric
- Number of pins: 6
- Material: Plastic
- Supplementary Article/Info 2: with holding frame
- Manufacturer: METZGER
-
Engine Code: N52 B25 A,
N52 B25 B, N52 B25 BE - Block Separation:
- Operating Mode: Electric
- Voltage [V]: 12
- Name: Ohumassimootja
- Manufacturer: PIE
- Engine Code: N52 B25 A
- Colour: black
- Number of pins: 5
- Name: Ohumassimootja
- Manufacturer: VDO