Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Length [mm]: 75
- Inner Diameter [mm]: 32
- Cooling Hose: from engine to water pump
- Outer Diameter 1 [mm]: 38
- Outer Diameter 2 [mm]: 41
- Name: Jahutusvedeliku torustik
- Manufacturer: MAX
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber), Aluminium
- Length [mm]: 75
- Inner Diameter [mm]: 32
- Cooling Hose: from engine to water pump
- Outer Diameter 1 [mm]: 38
- Outer Diameter 2 [mm]: 41
- Weight [kg]: 0.049
- Name: JAHUTUSVEDELIKU TORUSTIK
- Manufacturer: FEB
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber), Aluminium General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Cooling Hose: from heat exchanger to heater valve
- for OE number: 64 21 6 911 001
- Weight [kg]: 0.137
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Length [mm]: 560
- Supplementary Article/Info 2: with quick couplers
- Cooling Hose: from expansion tank to distributor
- Weight [kg]: 0.163
- Warranty: 3 years warranty
- Manufacturer: SKV GERMANY
- Name: CE 43SKV833
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Vehicle Equipment: for vehicles without automatic climate control
- for OE number: 64 21 6 923 944
- Weight [kg]: 0.224
- Manufacturer: VAICO
Cooling Hose: from water pump to heater valve, from heat exchanger to auxiliary water pump General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Transmission Type: Automatic Transmission
- Width [mm]: 200
- Cooling Hose: from water pipe to water pump
- Hose Length [mm]: 225
- Weight [kg]: 0.113
- Supplementary Article/Info 2: with quick couplers
- Manufacturer: FEBI
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber), Plastic General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Right
- Length [mm]: 310
- Supplementary Article/Info 2: with quick couplers
- Cooling Hose: from thermostat to radiator
- Weight [kg]: 0.36
- Warranty: 3 years warranty
- Name: CE 43SKV719
- Manufacturer: ESEN SKV
Material: Plastic, EPDM (ethylene propylene diene Monomer (M-class) rubber)
- for OE number: 17127519252
- Material: Rubber
- Supplementary Article/Supplementary Info: with pipe socket
- Weight [g]: 237
- Length [mm]: 450
- Inner Diameter 1 [mm]: 22
- Inner Diameter 2 [mm]: 22
- Name: Jahutusvoolik
- Manufacturer: IMP
- for OE number: 11 14 1 439 975
- Name: Jahutusvedeliku torustik
- Manufacturer: MAX
- Transmission Type: Automatic Transmission
- Width [mm]: 200
- Cooling Hose: from water pipe to water pump
- Hose Length [mm]: 225
- Supplementary Article/Info 2: with quick couplers
- Manufacturer: SWAG
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber), Plastic General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Cooling Hose: from expansion tank to engine cooler
- Hose Length [mm]: 445
- Weight [kg]: 0.226
- Supplementary Article/Info 2: with quick couplers
- Manufacturer: FEBI BILSTEIN
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber) General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- for OE number: 17 12 7 542 540
- Cooling Hose: from expansion tank to ventilation pipe
- Weight [kg]: 0.16
- Fitting Position: Upper
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Length [mm]: 560
- Cooling Hose: from expansion tank to distributor
- Weight [kg]: 0.163
- Supplementary Article/Info 2: with quick couplers
- Manufacturer: FEBI BILSTEIN
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber) General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Upper
- Transmission Type: Manual Transmission
- Colour: black
- Hose Length [mm]: 254
- Inner Diameter 1 [mm]: 38
- Inner Diameter 2 [mm]: 38
- Observe broschure:
- Manufacturer: GATES
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Length [mm]: 310
- Cooling Hose: from thermostat to radiator
- Fitting Position: Lower Right
- Weight [kg]: 0.316
- Supplementary Article/Info 2: with quick couplers
- Name: JAHUTUSVOOLIK
- Manufacturer: FEB
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber), Plastic General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Upper
- Transmission Type: Automatic Transmission
- Colour: black
- Hose Length [mm]: 394
- Inner Diameter 1 [mm]: 38
- Inner Diameter 2 [mm]: 38
- Observe broschure:
- Manufacturer: GATES
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Transmission Type: Automatic Transmission
- Length [mm]: 290
- Cooling Hose: from engine cooler to water pump
- Fitting Position: Upper Left
- Weight [kg]: 0.553
- Supplementary Article/Info 2: with quick couplers
- Name: JAHUTUSVOOLIK
- Manufacturer: FEB
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber), Plastic General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- for OE number: 11 14 1 439 975
- Name: JAHUTUSVEDELIKU TORUSTIK
- Manufacturer: TRU