Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Connector Shape: rectangular
- Operating Mode: Hydraulic
- Thread Size: M 12
- Thread Pitch [mm]: 1.5
- Number of pins: 1
- Switch point from [bar]: 0.2
- Switch point to [bar]: 0.5
- Supplementary Article/Info 2: with seal ring
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Engine Code: N52 B30 A
- Colour: brown
- Pressure to [bar]: 0.5
- Pressure from [bar]: 0.2
- Pressure [bar]: 0
-
Thread Size: M12x1,
5 - Spanner Size: 24
- Name: EP 1.800.071
- Manufacturer: EPS
- Tightening torque from [Nm]: 50
- Voltage [V]: 12
- Combi Switch Function: Normally Closed Contact
- Current Strength [A]: 0.25
- Tolerance [%]: 10
-
Thread Size: M12x1,
5 - Spanner Size: 24
- Pressure from [bar]: 0.2
- Pressure to [bar]: 0.5
- Number of pins: 1
- Corresponds to the original part in colour: brown
- Assy./disassy. by qualified personnel required!:
- Manufacturer: HELLA
- Name: HE 6ZL006097001
- Sensor Type: NTC Sensor
- Mounting Type: Bolted
- Connector Shape: rectangular
- Number of pins: 2
- Socket colour: black
- Spanner Size: 22
- Thread Size: M12x1.5
- for OE number: 13621433076
- Supplementary Article/Info 2: with seal ring
- Manufacturer: NRF
- Colour: brown
- Pressure [bar]: 5
- Housing Colour: brown
- Thread Size: M12×1.5?6g
- Diameter [mm]: 24
- Spanner Size: 24
- Number of pins: 1
- Manufacturer: DELPHI
- Name: oil pressure sensor
- Quality class: PJ
Additional information: "Tootja: DELPHI
(kvaliteediklass: PJ)"
Lisainfo: "Tootja: DELPHI
(kvaliteediklass: PJ)"
- Connector Shape: rectangular
- Sensor Type: NTC Sensor
- Thread Size: M 12
- Thread Pitch [mm]: 1.5
- Number of pins: 2
- Supplementary Article/Info 2: with seal ring
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Supplementary Article/Info 2: with integrated oil temperature sensor
- Thread Size: M12x1.5
- Manufacturer: VERNET
- Pressure [bar]: 0.35
-
Thread Size: M12 x 1,
5 - Number of pins: 1
- Technical Information Number: circuit N.C.
- Manufacturer: ERA
- Connector Shape: rectangular
- Material: Plastic
- Number of pins: 2
- Plug Type: Female
- Sensor Type: NTC Sensor
- Spanner Size: S22
-
Thread Size: M12*1,
5 - Name: NI 207088
- Manufacturer: NISSENS
Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.
- for OE number: 13 62 1 433 076
- Manufacturer: TRUCKTEC
- Switch Pressure [bar]: 0.3
- Thread Size: M12x1.5
-
Sensor Type: Closed-
type Sensor - Manufacturer: VERNET
-
Thread Size: M12 x 1,
5 - Spanner Size: 22
- Number of pins: 2
- Manufacturer: ERA
- Engine Code: N52 B30 A
-
Thread Size: M12x1,
5 - Spanner Size: 22
- Name: EP 1.830.272
- Manufacturer: EPS
-
Thread Size: M12x1,
5 - Spanner Size: 24
- Pressure from [bar]: 0.2
- Pressure to [bar]: 0.5
- Number of pins: 1
- Supplementary Article/Info 2: with seal ring
- Housing Colour: brown
- Assy./disassy. by qualified personnel required!:
- Name: HE 6ZL009600271
- Manufacturer: HELLA
- Connector Shape: rectangular
- Material: Plastic
- Number of pins: 2
- Plug Type: Female
- Sensor Type: NTC Sensor
- Spanner Size: not have
- Thread Size: not have
- Name: NI 207010
- Manufacturer: NISSENS
Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.
- for OE number: 13 62 7 525 014
- Sensor Type: Hall Sensor
- Number of pins: 3
- Fitting Depth [mm]: 28
- Supplementary Article/Info 2: without cable
- Connector Shape: oval
- Number of mounting bores: 1
-
Fabrication Number: ECP-
BM- 005 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Thread Size: M12x1,
5 - Spanner Size: 22
- Sensor Type: NTC Sensor
- Number of pins: 2
- Mounting Type: Vertical Screw Fitting
- Assy./disassy. by qualified personnel required!:
- Name: HE 6PT009107851
- Manufacturer: HELLA
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Number of pins: 3
- Weight [kg]: 0.03
- Warranty: 3 years warranty
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 17SKV494
- Number of pins: 2
- Supplementary Article/Supplementary Info: with seal
- Weight [kg]: 0.3
- Packaging length [cm]: 12
- Packaging width [cm]: 8
- Packaging height [cm]: 6
-
Fabrication Number: ECP-
BM- 001 - Number of pins: 3
- Supplementary Article/Info 2: without cable
- Colour: black
- Connector Shape: oval
- Sensor Type: Hall Sensor
- Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Required quantity: 1
- Voltage [V]: 12
- Number of pins: 3
- Sensor Type: Hall Sensor
- Supplementary Article/Info 2: without cable
- Housing Colour: black
- Manufacturer: BREMI
- Required quantity: 2
- Voltage [V]: 12
- Number of pins: 3
- Sensor Type: Hall Sensor
- Supplementary Article/Info 2: without cable
- Housing Colour: black
- Manufacturer: BREMI
- Number of pins: 3
- Manufacturer: DELPHI
- Name: DE SS11247
- Number of pins: 3
- Connector Shape: oval
- Supplementary Article/Info 2: without cable
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Number of connectors: 3
- Weight [kg]: 0.025
- Name: SW 33 10 2687
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Number of circuits: 4
- Lambda Sensor: Regulating Probe
- Manufacturer: KAMOKA
- Fitting Position: Intake Manifold
- Number of pins: 2
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Number of connectors: 3
- Weight [kg]: 0.025
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Lambda Sensor: Diagnostic Probe,
Thread pre- greased -
Fabrication Number: ESL-
SK- 000 - Manufacturer: NTY
-
Name: NTY ESL-
SK- 000
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Fabrication Number: ESS-
BM- 001 - Number of pins: 4
- Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Number of pins: 3
- Supplementary Article/Info 2: without cable
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Sensor Type: Hall Sensor
- Alternatively:
- Number of pins: 3
- Fitting Depth [mm]: 28
- Alternative Repair Kit: 550604
- Manufacturer: ERA
- Engine Code: N52 B30 A
- Required quantity: 2
- Name: EP 1.953.523
- Manufacturer: EPS
- Construction Year from: 07.2007
-
Engine Code: N52B30A,
N53B30O0 - Sensor Type: Hall Sensor
- Number of pins: 3
- Connector Shape: oval
- Supplementary Article/Info 2: without cable
- Weight [kg]: 0.02
- Manufacturer: VALEO
- Name: VA 366149
- Required quantity: 2
- Voltage [V]: 12
- Corresponds to the original part in colour: black
- Sensor Type: Hall Sensor
- Number of pins: 3
- Number of mounting bores: 1
- Assy./disassy. by qualified personnel required!:
- Manufacturer: HELLA
- Name: HE 6PU009121011
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Number of pins: 3
- Housing Colour: black
- Sensor Type: Hall Sensor
- Manufacturer: FAE
- Fitting Position: Front
-
Lambda Sensor: Diagnostic Probe,
Heated -
External Thread Size: M18 x 1,
5 - Spanner Size: 22
- Number of circuits: 4
- Cable Length [mm]: 650
- Weight [kg]: 0.095
- Name: SW 33 10 3198
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: after catalytic converter
-
Lambda Sensor: Heated,
Diagnostic Probe -
External Thread Size: M18 x 1,
5 - Spanner Size: 22
- Number of circuits: 4
- Cable Length [mm]: 460
- Weight [kg]: 0.086
- Name: SW 33 10 3200
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Version: 2
- Required quantity: 1
- Supplementary Article/Supplementary Info: without suction pipe
- Number of pins: 5
- Quality class: PJ
- Name: Air flow sensor
-
Fitting Position: Left Front,
after catalytic converter -
Lambda Sensor: Diagnostic Probe,
Planar probe, Heated - Quantity: 1
- not for engine code: N53B30A
- Cable Length [mm]: 614
- Manufacturer: DELPHI
-
Name: DE ES20368-
12B1
Left-/right-hand drive vehicles: for left-hand drive vehicles, for right-hand drive vehicles
- Quality: OE
- Manufacturer Restriction: DENSO
- Thread Size: M18x1.5
- Cable Length [mm]: 750
- Number of pins: 4
- Weight [g]: 93
- Gross Weight [g]: 140
- Manufacturer: DENSO
-
Name: DN DOX-
0150 - Quality class: Q
Lambda Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor
Additional information: "Tootja: DENSO
(kvaliteediklass: Q)"
Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"
- Quantity: 1
- Cable Length [mm]: 515
- Number of pins: 4
- Manufacturer: DELPHI
- Name: DE AS10238
- Lambda Sensor: Diagnostic Probe
- Block Separation:
- Number of circuits: 4
-
Recommended change interval [km]: 160,
000 - Connector/Clamp: Connector may need adjustment
- Manufacturer: BOSCH
- Name: BS 0258986602
Fitting Position: after catalytic converter, for cylinder 1-3, for cylinder 4-6
- Lambda Sensor: Regulating Probe
- Length [mm]: 910
-
Fabrication Number: ESL-
BM- 020 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Engine Code: N52 B30 A,
N52 B30 BF - Number of pins: 4
- Manufacturer: FAE
- Number of connectors: 4
-
Cable Length [mm]: 535,
435 - Weight [kg]: 0.086
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Lambda Sensor: Lambda Sensor
- Weight [kg]: 0.2
- Warranty: 3 years warranty
- Always compare old and new part (in particular OE No.):
- Name: CE 09SKV405
- Manufacturer: ESEN SKV
- Required quantity: 1
- Voltage [V]: 12
- Number of pins: 5
- Housing Type: without housing
- Manufacturer: BREMI
- Lambda Sensor: Lambda Sensor
- Voltage [V]: 12
- Colour: red
- Number of circuits: 5
- Weight [kg]: 0.15
- Operating Mode: Electric
- Warranty: 3 years warranty
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 09SKV905
- Engine Code: N52 B30 A
- not for engine code: N53B30A
-
Fitting Position: Left Front,
after catalytic converter - Required quantity: 1
- Length [mm]: 560
- Cable Length [mm]: 570
- Conductor Number: 4
- Available as universal article as well, see article no.: 1.998.235
- Number of circuits: 4
- Name: EP 1.998.325
- Manufacturer: EPS
Left-/right-hand drive vehicles: for left-hand drive vehicles, for right-hand drive vehicles Lambda Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased
-
Fitting Position: before catalytic converter,
for cylinder 4- 6 -
Left-/right-hand drive vehicles: for left-
hand drive vehicles -
Lambda Sensor: Regulating Probe,
Heated -
External Thread Size: M18 x 1,
5 - Spanner Size: 22
- Number of circuits: 5
- Cable Length [mm]: 406
- Weight [kg]: 0.097
- Name: SW 33 10 4087
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Right Front,
before catalytic converter -
Left-/right-hand drive vehicles: for right-
hand drive vehicles -
Lambda Sensor: Regulating Probe,
Broadband lambda sensor, Heated - Quantity: 1
-
Engine Code: N52 B30 A,
N52 B30 BF - Cable Length [mm]: 910
-
Name: DE ES21275-
12B1 - Manufacturer: DELPHI
- Version: 2
- Quantity: 1
- Housing Type: without housing
- Number of pins: 5
- Plug Type: Male
- Housing Colour: black
- Voltage [V]: 12
- Recommended additional repairs: Air Filter
- Manufacturer: DELPHI
-
Name: DE AF10446-
12B1
-
Fitting Position: before catalytic converter,
for cylinder 4- 6 -
Left-/right-hand drive vehicles: for left-
hand drive vehicles -
Lambda Sensor: Regulating Probe,
Heated -
External Thread Size: M18 x 1,
5 - Spanner Size: 22
- Number of circuits: 5
- Cable Length [mm]: 406
- Weight [kg]: 0.097
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Construction Year from: 10.2007
- Lambda Sensor: Regulating Probe
-
Fitting Position: before catalytic converter,
for cylinder 4- 6 -
Left-/right-hand drive vehicles: for left-
hand drive vehicles - Engine Code: N52 B30B
- Number of circuits: 5
- Overall Length [mm]: 910
-
Recommended change interval [km]: 250,
000 - Manufacturer: BOSCH
- alternative OE number: 13627551638
- Required quantity: 1
- Mounting Type: Bolted
- Number of pins: 5
- Supplementary Article/Supplementary Info: without suction pipe
- Assy./disassy. by qualified personnel required!:
- Manufacturer: HELLA
- Name: HE 8ET009142641
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Lambda Sensor: Diagnostic Probe
-
Fitting Position: after catalytic converter,
for cylinder 4- 6 - Number of circuits: 4
- Overall Length [mm]: 502
-
Recommended change interval [km]: 250,
000 - Manufacturer: BOSCH
-
Engine Code: N52 B30 A,
N52B30A, N52B30BF/ N53B30A -
Fitting Position: Left Front,
before catalytic converter - Required quantity: 1
-
Length [mm]: 1,
400 -
Cable Length [mm]: 1,
500 - Conductor Number: 5
- Number of circuits: 5
- Name: EP 1.998.482
- Manufacturer: EPS
Left-/right-hand drive vehicles: for left-hand drive vehicles, for right-hand drive vehicles Lambda Sensor: Regulating Probe, Heated, Planar probe, Broadband lambda sensor, Thread pre-greased
- Number of pins: 9
- Weight [kg]: 0.08
- Warranty: 3 years warranty
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 17SKV424
- Construction Year to: 09.2007
- Lambda Sensor: Regulating Probe
-
Fitting Position: before catalytic converter,
for cylinder 4- 6 -
Left-/right-hand drive vehicles: for left-
hand drive vehicles - Engine Code: N52 B30B
- Number of circuits: 5
- Overall Length [mm]: 340
-
Recommended change interval [km]: 250,
000 - Manufacturer: BOSCH
- Engine Code: N52 B30 A
-
Left-/right-hand drive vehicles: for left-
hand drive vehicles - Lambda Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Length [mm]: 900
- Number of pins: 6
- Manufacturer: FAE
- Lambda Sensor: Regulating Probe
-
Fitting Position: before catalytic converter,
for cylinder 1- 3 - Number of circuits: 5
-
Overall Length [mm]: 1,
400 -
Recommended change interval [km]: 250,
000 - Manufacturer: BOSCH
- Name: BS 0258017098
- Lambda Sensor: Diagnostic Probe
-
Fitting Position: after catalytic converter,
for cylinder 1- 3 - Number of circuits: 4
- Overall Length [mm]: 572
-
Recommended change interval [km]: 250,
000 - Manufacturer: BOSCH
- Lambda Sensor: Broadband lambda sensor
- Number of pins: 5
-
Cable Length [mm]: 1,
290 - for article number: 81668E
- Quality: OE EQUIVALENT
- Manufacturer: MEAT&DORIA
- Production date from: 01.11.2005
- Engine Code: N52 B30 A
-
Fitting Position: for cylinder 4-
6, before catalytic converter -
Left-/right-hand drive vehicles: for left-
hand drive vehicles - Lambda Sensor: Broadband lambda sensor
-
Thread Size: M18 x 1,
5 - Cable Length [mm]: 900
- Supplementary Article/Supplementary Info: with thermal protection
- Number of pins: 6
- Manufacturer: MEYLE
- Construction Year from: 07.2007
-
Engine Code: N52B30A,
N53B30O0 - Fitting Position: before catalytic converter
- Number of pins: 6
- Cable Length [mm]: 950
-
Thread Size: M18x1,
5 - Switch Pressure [bar]: 4
- Weight [kg]: 0.18
- Name: VA 368430
- Manufacturer: VALEO
Lambda Sensor: Planar probe, Broadband lambda sensor, Thread pre-greased, Heated
- Lambda Sensor: Regulating Probe
-
Fitting Position: before catalytic converter,
for cylinder 4- 6 -
Left-/right-hand drive vehicles: for left-
hand drive vehicles - Engine Code: N52 B30 A
- Number of circuits: 5
- Overall Length [mm]: 910
-
Recommended change interval [km]: 250,
000 - Manufacturer: BOSCH
- Number of pins: 9
- Weight [kg]: 0.1
- Warranty: 3 years warranty
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 17SKV423
-
Line insulation design: with silicone-
coated woven- fibre insulation -
Cable Length [mm]: 1,
405 -
Thread Size: M18 x 1,
5 - Conductor Number: 5
- Connector Shape: D Shape
-
Length [mm]: 1,
250 - Number of pins: 5
-
Lambda Sensor: Regulating Probe,
Thread pre- greased - Number of circuits: 5
- Exhaust System: after catalytic converter
- Weight [kg]: 0.188
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
for SA code: S205A,
S2TCA, S206A - Transmission Type: Automatic Transmission
- Colour: black
- Operating Mode: Electric
- Number of pins: 6
- Material: Plastic
- Supplementary Article/Info 2: with holding frame
- Manufacturer: METZGER
- Quantity: 1
- Alternatively:
- Housing Type: without housing
- Number of pins: 5
- Plug Type: Male
-
Housing Colour: black/
silver - Voltage [V]: 12
- Recommended additional repairs: Air Filter
-
Name: DE AF10381-
12B1 - Manufacturer: DELPHI
- Lambda Sensor: Diagnostic Probe
- Fitting Position: after catalytic converter
- Length [mm]: 550
- Number of pins: 4
- Technical Information Number: Universal 77005
- Manufacturer: FAE
- alternative OE number: 13627520519
- Required quantity: 1
- Mounting Type: Bolted
- Number of pins: 5
- Supplementary Article/Supplementary Info: without suction pipe
- Assy./disassy. by qualified personnel required!:
- Manufacturer: HELLA
- Name: HE 8ET009142631
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Construction Year from: 09.2008
- Construction Year to: 10.2011
- Engine Code: N53B30O0
- Fitting Position: before catalytic converter
- Number of pins: 6
-
Cable Length [mm]: 1,
400 -
Thread Size: M18x1,
5 - Switch Pressure [bar]: 4
- Weight [kg]: 0.207
- Name: VA 368226
- Manufacturer: VALEO
Lambda Sensor: Planar probe, Broadband lambda sensor, Thread pre-greased, Heated