• Number of mounting bores: 2
• Supplementary Article/Info 2: with seal ring
• Manufacturer: ELRING

• Engine Code: N54 B30 A
• Keermemõõt: M12x1,5
• Võtmekaugus: 22
• Name: EP 1.830.272
• Manufacturer: EPS

• Engine Code: N54 B30 A
• Thread Size: M12x1,5
• Spanner Size: 22
• Manufacturer: FACET

• OE-numbri jaoks: 13 62 7 525 014
• Anduritüüp: Hallsensor
• Pistikkontaktide arv: 3
• Installatsiooni sügavus (mm): 28
• Piirangutega toode/piirangu info 2: ilma kaablita
• Pistikukatte kuju: ovaalne
• Kinnitusaukude hulk: 1
• Seerianumber: ECP-BM-005
• Manufacturer: NTY

• Engine Code: N54 B30 A
• Thread Size: M12x1,5
• Supplementary Article/Supplementary Info: with gasket/seal
• Number of pins: 2
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Pistikkontaktide arv: 3
• Garantii: 3 aastat garantii
• Kaal (kg): 0,03
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Name: CE 17SKV494
• Manufacturer: ESEN SKV

• Engine Code: N55 B30 A
• Fitting Position: Lower
• Keermemõõt: M12x1,5
• Võtmekaugus: 17
• Name: EP 1.830.405
• Manufacturer: EPS

• Engine Code: N55 B30 A
• Fitting Position: Lower
• Thread Size: M12x1,5
• Spanner Size: 17
• Manufacturer: FACET

• Garantii: 3 aastat garantii
• Kaal (kg): 0,03
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY

• Required quantity: 2
• Pinge [V]: 12
• Pistikkontaktide arv: 3
• Anduritüüp: Hallsensor
• Piirangutega toode/piirangu info 2: ilma kaablita
• Korpusevärv: must
• Manufacturer: BREMI

• Lambda andur: Diagnoosisond, Keere eelmääritud
• Seerianumber: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Required quantity: 2
• Sensor Type: Hall Sensor
• Mounting Type: Screw Connection
• Shape: oval
• Number of pins: 3
• Fitting Depth [mm]: 28
• Supplementary Article/Info 2: with seal ring
• Manufacturer: NRF

• Height [mm]: 27.9
• Sensor Type: Hall Sensor
• Number of connectors: 3
• Manufacturer: VERNET

• Pistikkontaktide arv: 3
• Seerianumber: EFP-BM-005

• Engine Code: N55B30A
• Required quantity: 1
• Construction Year from: 04.2011
• Manufacturer: BREMI

• Oxygen Sensor: Regulating Probe
• Number of circuits: 4
• Manufacturer: KAMOKA

• Seerianumber: ESS-BM-000
• Manufacturer: NTY

• Engine Code: N54 B30 A
• Required quantity: 2
• Name: EP 1.953.523
• Manufacturer: EPS

• Engine Code: N54 B30 A
• Required quantity: 2
• Manufacturer: FACET

• Required quantity: 2
• Sensor Type: Hall Sensor
• Number of pins: 3
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Manufacturer: VALEO
• Name: VA 366149

• Required quantity: 1
• Engine Code: N54B30A
• Number of pins: 4
• Mounting Type: Bolted
• Supplementary Article/Supplementary Info: with gasket/seal
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PP009403241

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Quantity: 2
• Number of pins: 3
• Manufacturer: DELPHI
• Name: DE SS11123

• Anduritüüp: Hallsensor
• valikuliselt:
• Pistikkontaktide arv: 3
• Installatsiooni sügavus (mm): 28
• alternatiivne remondikomplekt: 550604
• Manufacturer: ERA

• Oxygen Sensor: Diagnostic Probe, Heated
• Fitting Position: after catalytic converter
• Required quantity: 1
• Engine Code: N54B30A
• Number of pins: 4
• Cable Length [mm]: 340
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA ELEKTRYKA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Pistikkontaktide arv: 4
• Pistikute teostus: Male
• Seerianumber: EPP-BM-023
• Manufacturer: NTY

• Required quantity: 1
• Pinge [V]: 12
• Korpusetüüp: ilma korpuseta
• Pistikkontaktide arv: 4
• Garantii: 3 aastat garantii
• Uus osa:
• Kaal (kg): 0,06
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY

• Engine Code: N54 B30 A
• Manufacturer: NRF

• Engine Code: N54 B30 A
• Length [mm]: 49
• Number of connectors: 3
• Weight [kg]: 0.03
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year from: 10.2010
• Quantity: 1
• Engine Code: N55 B30 A
• Number of pins: 4
• Pressure from [kPA]: 20
• Manufacturer: DELPHI
• Name: DE PS10215

• Engine Code: N54 B30 A
• Construction Year to: 08.2011
• Pistikkontaktide arv: 3
• Garantii: 3 aastat garantii
• Kaal (kg): 0,06
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV620

• Mounting Type: Bolted
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PP358152381
• Lisainfo: 6PP358152-381
• Additional information: 6PP358152-381

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• External Thread Size: M10 x 1
• Number of connectors: 3
• Weight [kg]: 0.04
• for OE number: 13 53 8 643 665
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Required quantity: 2
• Voltage [V]: 12
• Corresponds to the original part in colour: black
• Sensor Type: Hall Sensor
• Number of pins: 3
• Number of mounting bores: 1
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PU009121011

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• External Thread Size: M10 x 1
• Number of connectors: 3
• Weight [kg]: 0.04
• for OE number: 13 53 8 643 665
• Name: SW 33 10 6949
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: N54 B30 A, N55 B30 A
• Fitting Position: Catalytic Converter, after catalytic converter
• Block Separation:
• Oxygen Sensor: Heated, Diagnostic Probe
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 460
• Weight [kg]: 0.086
• Name: SW 33 10 3200
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: N54 B30 A
• Required quantity: 1
• Pressure from [kPA]: 10
• Pressure to [kPA]: 123
• Output Voltage, from [V]: 0.296
• Output Voltage, up to [V]: 4.75
• Manufacturer: FACET

• Engine Code: N55 B30 A
• Construction Year to: 09.2010
• Required quantity: 1
• Pressure from [kPA]: 10
• Pressure to [kPA]: 256
• Output Voltage, from [V]: 0.318
• Output Voltage, up to [V]: 4.75
• Manufacturer: FACET

• Construction Year from: 03.2010
• Supplementary Article/Info 2: High Pressure Side
• Fuel Mixture Formation: Direct Injection
• Manufacturer: BOSCH

• Version: 1
• Engine Code: N54 B30 A
• Manufacturer: NRF KLIMATYZACJA

• Number of connectors: 4
• Weight [kg]: 0.01
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: N55 B30 A
• Fitting Position: after catalytic converter
• Required quantity: 1
• Oxygen Sensor: Diagnostic Probe
• Kaablipikkus (mm): 250
• Ühendushulk: 4
• Lambda andur: soojendatud, Titaanandur, Keere eelmääritud
• Ülekandeliinide arv: 4
• Name: EP 1.998.235
• Manufacturer: EPS

• Oxygen Sensor: Diagnostic Probe, Planar probe, Heated
• Fitting Position: after catalytic converter
• Quantity: 1
• Engine Code: N54 B30 A
• Cable Length [mm]: 614
• Manufacturer: DELPHI
• Name: DE ES20368-12B1

• Engine Code: N55 B30 A
• Fitting Position: after catalytic converter
• Required quantity: 1
• Cable Length [mm]: 250
• Conductor Number: 4
• Number of circuits: 4
• Manufacturer: FACET

Oxygen Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased

• Construction Year from: 03.2010
• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Manufacturer: BOSCH
• Name: BS 0258986602

• Construction Year from: 03.2010
• Kütusesüsteemi seadmed: Otsesissepritse
• Tootja piirang: Hochdruckseite
• Versioon: IAM
• Manufacturer: METZGER

• Oxygen Sensor: Regulating Probe, Broadband oxygen sensor, Heated
• Fitting Position: before catalytic converter
• Quantity: 1
• Engine Code: N54 B30 A
• Cable Length [mm]: 1,392
• Name: DE ES20695-12B1
• Manufacturer: DELPHI

• Supplementary Article/Info 2: without cable
• Pressure [Pa] from: 40,000
• Pressure [Pa] to: 200,000
• Voltage [V]: 5
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PP009400051
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Required quantity: 1
• Pinge [V]: 12
• Pistikkontaktide arv: 4
• Korpusetüüp: ilma korpuseta
• Manufacturer: BREMI

• Engine Code: N54 B30 A
• Construction Year to: 08.2011
• Thread Size: M10x1
• Spanner Size: 24
• Number of pins: 3
• Injection System: Common Rail
• Supplementary Article/Info 2: Low Pressure Side, with seal ring
• Housing Colour: black
• Connector Shape: oval
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: N54 B30 A
• Fitting Position: before catalytic converter
• Required quantity: 1
• Oxygen Sensor: Regulating Probe
• Length [mm]: 1,400
• Kaablipikkus (mm): 1 500
• Ühendushulk: 5
• Ülekandeliinide arv: 5
• Name: EP 1.998.482
• Manufacturer: EPS

Lambda andur: soojendatud, Titaanandur, Lineaarne lambda andur, Keere eelmääritud

• Oxygen Sensor: Regulating Probe
• Construction Year from: 03.2010
• Fitting Position: before catalytic converter
• Lambda andur: Bistabiilne andur
• Garantii: 3 aastat garantii
• Kaal (kg): 0,15
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Tehniline informatsioon: Universal
• Manufacturer: SKV GERMANY
• Name: CE 09SKV915

• Pistikkontaktide arv: 9
• Garantii: 3 aastat garantii
• Kaal (kg): 0,08
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV424

• Construction Year from: 03.2010
• Oxygen Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 5
• Overall Length [mm]: 685
• Recommended change interval [km]: 250,000
• Manufacturer: BOSCH

• Pistikkontaktide arv: 9
• Garantii: 3 aastat garantii
• Kaal (kg): 0,1
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV423

• Quantity: 1
• Housing Type: without housing
• Number of pins: 4
• Plug Type: Male
• Housing Colour: black/silver
• Voltage [V]: 12
• Recommended additional repairs: Air Filter
• Name: DE AF10429-12B1
• Manufacturer: DELPHI